Why not allow notes or a field for departments?

It would be great if there was an option to allow notes for the Creative Cloud users. Or even an optional field for departments. When it comes time for billing in a large organization, it would make splitting the bill between departments much easier.

FIXED!
Had the same problem. AOL had been working for months, stopped working for no reason. I checked the settings against aol's instructions and the username was wrong - aol state that the username should not have the @aol.com suffix but it did. The next problem encountered was that the iPad would not let me change the username under outgoing smtp settings. Answer is to do the following:
Go to settings -> mail ->aol account ->outgoing mail server.
Turn the primary smtp server off.
Create a new one for smtp.aol.com with the username without @aol.com at the end and your password.
The rest of the settings should populate automatically.
Good luck.

Similar Messages

HT204053 I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized. Any suggestions?

I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
Any suggestions?

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

JPY is not allowed as a payment currency for payment method 1

Hi
While doing a payment run in F110 i am getting an error JPY is not allowed as a payment currency for payment method 1 where every thing is correct "error message that payment not
possible "
Laxmi

Hi
Go to FBZP --> Payment Method in Country --> Select your Country and Payment Method --> Click on "Currencies Allowed" tab on the left --> Check if JPY is added there.
Also, perform the below checks:
FBZP --> Bank Determination --> Select your commpany code -->
1. Select Ranking Order tab on the left --> Check if the combination of Payment method, Currency, Rank Order & House Bank is maintained.
2. Select Bak Accounts tab on the left --> Check if the combination of House Bank, Payment method, Currency, Account ID & Bank Subaccount is maintained.
3. Select Available amounts tab on the left --> Check if the combination of House Bank, Account ID, Currency and Available Amount is maintained.
Let me know if you have more queries.
Regards
Srini

Iphone ios 7 not allowing pics to be scaled for wallpaper. Pls help, have tried switching off Paralax.

iphone ios 7 not allowing pics to be scaled for wallpaper. Pls help, have tried switching off Paralax.

Thank you for such a quick response. Most of the things brought out in the article I had already done, but there were some others that I would not have thought of. Thank you again for directing me to this site. I will have to see now if this will increase the battery life any.
MaggieIB

Why java allow start() method only once for a thread

Hi ,
Why java allows start method only once for thread . suppose
Thread t = new Thread();
t.start();
say at later stage if again we call t.start() IllegalStateException is thrown , even though isAlive method returns false.
Hence the question , why start() method is allowed only once.If you need start a thread , we need to create a new instance.

Really. Why do you think that? Do you have any evidence? It is one of the first things I would think of, personally.Considering that the Thread API doesn't allow you to specify a stack address (only stack size), I think it demonstrates they wanted to remove that capability from their Thread API all together. That missing "capability" makes me believe they want me to believe it's not something I need to worry about when using their API... I think the exact semantics of the Thread class and its methods were driven by how to make it most understandable and usable for their customers. I'm certain this issue was one of many that was given considerable thought during the design and implementation of the JVM and the underlying runtime classes.
Do I have any evidence? No. But if you can point me at some first-hand information on this, I'd love to read it. Most of what I've found is second or third hand accounts. (and I mean that sincerely, not as a smart-ass remark or rebuke of your comments).
On the one hand you seem to think the Java API designers are idiots, on the other hand you think that they should be. I can't make it out.I thought my position was that the Java developers were talented enough to implement platform in whatever way their API called for; hence, the designers made a choice about how they wanted their API to be used by their customers. They decided which capabilities they wanted to include or exclude, and created an API that was consistent with their vision for this technology. While I'm certain technical limitations had an effect on the API design, I certainly don't think the API was dictated by the them.
I think the current design of the Java Thread API was a reflection of their vision to make Threading easier and more accessible to Joe Programmer, not limitations in the implementation. I never said it was wrong or that I could do better... I just said I think they could have done something different if they decided it would have made for a better customer experience. But hey, maybe I'm wrong.

In which IT To Date is not allowed & not having more than one record

Hi all,
Could you please tell me "In which IT To Date is not allowed & not having more than one record ?"
Thanks in advance
Regards,
Asiya

Hi,
Just go through IT0003 and see if it fulfills the requirements or not.
Param

Not allowing totaling of a field in alv output

hi,
I had made a ALV in which i have to hide 1 field for getting it totaling.
i.e. if somebody try to make total of it ,it should not be allowed on dat field . is dere any solution for this problem?
plzz provide me guidelines for it.

Please please it this. I made the total for every field other than RACCT and SUM_COMM.
*&      Form sub_prepare_display_output
      Display output
--> No Parameter
FORM sub_prepare_display_output .
Local variables
DATA: l_lead_col   TYPE char25,       " Lead column
        l_progname   TYPE sy-repid,     " Program name
Local internal tables
        l_oref_layout TYPE REF TO cl_salv_layout, "Layout
Local work area
        l_wa_key      TYPE salv_s_layout_key,     "Work area for key
        l_except1   TYPE REF TO cx_salv_msg,"Exception
        l_text1     TYPE string.            "Exception msg
If profit center is checked
IF p_prfctr = c_check.
    l_lead_col = 'Profit Center'(041).
If product catagory is checked
ELSEIF p_prodc = c_check.
    l_lead_col = 'Product Category'(042).
If material is checked
ELSEIF p_smatnr = c_check.
    l_lead_col = 'Material No.'(043).
ENDIF.
Create ALV instance with class-method cl_salv_table=>factory
TRY.
      CALL METHOD cl_salv_table=>factory
        EXPORTING
          list_display = if_salv_c_bool_sap=>false
        IMPORTING
          r_salv_table = v_oref_table
        CHANGING
          t_table      = i_final.
    CATCH cx_salv_msg INTO l_except1.
      l_text1 = l_except1->get_text( ).
      MESSAGE i000 WITH l_text1.
      LEAVE LIST-PROCESSING.
ENDTRY.
Make header of the report
PERFORM sub_header_report USING v_oref_table.
Get the toolbar
v_oref_functions = v_oref_table->get_functions( ).
For activating application toolbar
v_oref_functions->set_all( abap_true ).
v_oref_columns = v_oref_table->get_columns( ).
It populate the key fields which are always displayed
PERFORM sub_fill_fields_of_fcatalog USING:
'SUM_COMM'        l_lead_col                ' ',
'RACCT'          'Account Number'(035)      ' ',
'FOBAC'          'FOB Acrual'(023)          'X',
'EXCESS'         'Excess'(024)              'X',
'OBSOLE'         'Obsolescence'(025)        'X',
'PPV'            'Puchachse Price Var'(026) 'X',
'FR_VAR'         'Freight Variance'(027)    'X',
'PROD_OR_VAR'    'Produc Ord Var'(028)      'X',
'DEP_VAR'        'Dept. Variance'(029)      'X',
'OTH_PROD_VAR'   'Other Prod Var'(030)      'X',
'PR_OR_SCRP_VAR' 'Scrap Variance'(031)      'X',
'COST_OF_ACC'    'Cost of Sales Accnt'(032) 'X',
'INV_ACC'        'Inventory Account'(033)   'X'.
Optimize the columns
v_oref_columns->set_optimize( value = 'X' ).
Setting the layout
get the LAYOUT object
l_oref_layout = v_oref_table->get_layout( ).
set the layout key
l_progname = sy-repid.
l_wa_key-report = l_progname.
l_oref_layout->set_key( value = l_wa_key ).
set save restriction:
none / only user-dependent / only user-independent
l_oref_layout->set_save_restriction(
value = if_salv_c_layout=>restrict_none ).
set: setting of default layout is allowed / isnu2019t allowed
l_oref_layout->set_default( value = 'X' ).
Dispaly the output
v_oref_table->display( ).
ENDFORM.                    " sub_prepare_display_output
*&      Form sub_header_report
    Create the header of the report
     -->P_v_oref_TABLE table name
FORM sub_header_report USING    p_v_oref_table TYPE REF TO
                                           cl_salv_table .
DATA : l_oref_grid TYPE REF TO cl_salv_form_layout_grid.
CREATE OBJECT l_oref_grid.
Add text items for top of page
l_oref_grid->create_text( row = 1 column = 1 text = 'Program'(022)
l_oref_grid->create_text( row = 1 column = 2 text = sy-repid ).
l_oref_grid->create_text( row = 2 column = 1
text = 'User Name'(021) ).
l_oref_grid->create_text( row = 2 column = 2 text = sy-uname ).
l_oref_grid->create_text( row = 3 column = 1 text = 'Date'(020) ).
l_oref_grid->create_text( row = 3 column = 2 text = sy-datum ).
l_oref_grid->create_text( row = 3 column = 3 text = 'Time'(019) ).
l_oref_grid->create_text( row = 3 column = 4 text = sy-uzeit ).
l_oref_grid->create_text( row = 4 column = 1 text = 'System'(018) ).
l_oref_grid->create_text( row = 4 column = 2 text = sy-sysid ).
l_oref_grid->create_text( row = 4 column = 3 text = 'Client'(017) ).
l_oref_grid->create_text( row = 4 column = 4 text = sy-mandt ).
Declare grid as header of list
p_v_oref_table->set_top_of_list( value = l_oref_grid ).
ENDFORM.                    " sub_header_report
*&      Form sub_fill_fields_of_fcatalog
      This subroutine populates the field catalog excluding
      period fields
     -->P_FIELDNAME Table field name
     -->P_NAME      Field description
     -->P_DEC       Decimal value flag
FORM sub_fill_fields_of_fcatalog USING p_fieldname TYPE lvc_fname
                                        p_name      TYPE c
                                        p_dec       TYPE c.
DATA: l_char_l TYPE scrtext_l, "For short text
        l_char_m TYPE scrtext_m, "For medium text
        l_char_s TYPE scrtext_s, "For long text
        l_except1   TYPE REF TO cx_salv_not_found,"Exception
        l_text1     TYPE string,            "Exception msg
        l_orf_aggregs TYPE REF TO cl_salv_aggregations.
Getting the text long/short/medium into variables
l_char_l = p_name.
l_char_m = p_name.
l_char_s = p_name.
Setting the long/short/medium text and fix the key fileds
TRY.
      CALL METHOD v_oref_columns->get_column
        EXPORTING
          columnname = p_fieldname
        RECEIVING
          value      = v_oref_column1.
    CATCH cx_salv_not_found INTO l_except1.
      l_text1 = l_except1->get_text( ).
      MESSAGE i000 WITH l_text1.
      LEAVE LIST-PROCESSING.
ENDTRY.
v_oref_column ?= v_oref_column1.
v_oref_column->set_long_text( l_char_l ).
v_oref_column->set_medium_text( l_char_m ).
v_oref_column->set_short_text( l_char_s ).
v_oref_column->set_key( value = 'X' ).
v_oref_columns->set_key_fixation( value = 'X' ).
Set the decimal length
IF p_dec = 'X'.
    v_oref_column->set_decimals( value = '2' ).
ENDIF.
IF p_fieldname = 'RACCT' AND p_gl <> c_check.
    v_oref_column->set_visible( value = space ).
ENDIF.
IF p_gl = c_check.
    v_oref_columns->set_column_position( columnname = 'RACCT'
                                           position = 2 ).
ENDIF.
IF p_fieldname NE 'RACCT' AND p_fieldname NE 'SUM_COMM'.
    l_orf_aggregs = v_oref_table->get_aggregations( ).
    l_orf_aggregs->add_aggregation( columnname = p_fieldname
                   aggregation = if_salv_c_aggregation=>total ).
ENDIF.
ENDFORM.                    " sub_fill_fields_of_fcatalog

Safari will not allow typing in search field

Installed Lion ok. Now safari will not allow typing in the search field, Turned extensions off, same issue. Selected different search engines, same issue. It did work for a while. Can't figure it out. Thanks

Looks like my error. I was trying to select the search engine and type over it. You can just type and it goes away. Sorry for the post.

Forms wizard does not allow what type of field to use as default?

I have Acrobat 9 and am creating a form that has ober 300 fields (for logging calls).
The issue I have is when starting the wizard, it defaults to creating all 300 fields as TEXT boxes. I'd like to have them as COMBO BOXES. I see no way to change them or to change how adobe 9 creates them at start up of the wizard.
I know I can do them one at a time and even copy and paste groups of them, but they don't line up as well when I do it this way.
Any ideas?
Thanks

Hi!
Thanks very much for your reply. Precisely what I'm hoping to do is stamp annotations--to the point that I've prototyped three whole toolbars of fixtures, sensors, and wall controls with mocked up rubber stamps, and marked up several whole buildings worth of construction plans to show the concept.
Okay--so the stamp annotation looks terrific. How do I find out more? The Acrobat 9.1 SDK (under "Plug-ins and Applications", then "Creating Annotations") says this:
Several annotation types exist, which are identified by their subtype. Each subtype can have additional properties that extend the basic ones. The subtype for text annotations (also called notes) is text. The subtype for link annotations is link. The Acrobat core API contains two built-in annotation typedefs PDTextAnnot and PDLinkAnnot. A PDTextAnnot object corresponds to a text annotation and a PDLinkAnnot object corresponds to a link annotation.
That paragraph (and the subsequent pages in that chapter) led me to think that my options were:
Text annotation
Link annotation
3D annotation
Dive into the Cos layer and create a custom annotation
Where can I find documentation on the Stamp annotation? (I do have the Stamper sample application.)
Thanks again,
John Murdoch

Allow changes to SC fields for catalog items

We're on SRM 5.0 (SRMServer 5.5). In contrast to free-text (non-catalog) items, EBP makes certain fields display-only when adding catalog items to shopping cart. We need to make the following fields available for user's input when the user adds a zero-priced item from the catalog:
- price
- currency
- UoM
One solution I can think of is to make EBP treat zero-priced catalog items as free-text items. To achieve that, will it be enough to implement a BAdI (e.g. BBP_CATALOG_TRANSFER) to blank out CATALOGID and CATALOGITEM fields?
Failing that, can we use BBP_SC_UI_CTRL method of BBP_UI_CONTROL_BADI to make price/currency/UoM available for input?
I know there're SAP Notes to make Price and UoM changeable for catalog items (693175,748855), but they all entail modifications which I'd like to stay away from as much as possible.
Thanks and Cheers,
Serguei

Thank you for your quick response, Yann.
So, you confirm that the CATALOGID field is available to the BBP_CATALOG_TRANSFER BAdI, and that clearing it will open the fields? Also, can I assume that CATALOGID is the only criteria in price determination for my scenario - so that, when CATALOGID is blank, EBP will treat the item price as "manual price", not "catalog price"?
You've brought up a good point about reporting on this field. I'll keep it in mind.
What about the second approach: can BBP_UI_CONTROL_BADI (or some other BAdI) be used to modify SC field status for the mentioned fields?
The two OSS Notes are not part of standard, they are not included in any Support Pack, so they're mods, and will be our last option to consider.
Cheers,
Serguei

Why is the multi-line option not allowed in my text fields? Acrobat X Pro

I have created a form in which I wish to make mulit-line fields. To create the original fields, I used auto field detect, then copied and pasted them to repeat in a chart. None of these fields allow me to select the multi-line and scroll text options I need (including the first auto-detected ones). When I draw a new field, it allows me to apply multi-line and scroll text. Any idea whay these first fields arent allowing the same? thanks!

ah! found it - the option for Comb of Characters was checked, thus greying out the other options. Thanks anyway!

SANE does not allow c++ external backend ( epkowa for epson V200)

Some Epson scanners ( Perfection V100, V200, etcc ) need an external library and the corresponding firmware from epson site ( package iscan and iscan-plugin ).
On gentoo, debian based and rpm based distrib, sane is compiled to allow such things
Stock sane from sane.org and arch does not seem to link with the c++ backend epkowa provided by epson
xsane work fine but scanimage -L not ( scanimage is necessary for scripting )
To use an epson external firmware based scanner , one have to compile sane by hand
and modify frontend/Makefile
LINK = $(CC) [...] need to be replaced by LINK = g++ [ ... ]
Lost several hours to figure out where was the prb, cause the epkowa sane backend used to work out of the box on other distrib

I "SOLVED"
I replaced the original "epson", "epson2" and "epkowa" drivers with the drivers installed on a notebook with Fedora16 (and sane 1.0.23), and now epkowa profile works good with all resolutions!
You can download Fedora16 epson drivers here.
$ ls -l /usr/lib/sane|grep epson
-rwxr-xr-x 1 pippo pippo 179760 10 set 2012 libsane-epson2.so
-rwxr-xr-x 1 pippo pippo 179760 10 set 2012 libsane-epson2.so.1
-rwxr-xr-x 1 pippo pippo 179760 10 set 2012 libsane-epson2.so.1.0.23
-rwxr-xr-x 1 pippo pippo 122080 10 set 2012 libsane-epson.so
-rwxr-xr-x 1 pippo pippo 122080 10 set 2012 libsane-epson.so.1
-rwxr-xr-x 1 pippo pippo 122080 10 set 2012 libsane-epson.so.1.0.23
$ ls -l /usr/lib/sane|grep epkowa
-rwxr-xr-x 1 pippo pippo 889 9 dic 11.12 libsane-epkowa.la
lrwxrwxrwx 1 root root 24 1 giu 18.34 libsane-epkowa.so -> libsane-epkowa.so.1.0.15
-rwxr-xr-x 1 pippo pippo 620651 9 dic 11.12 libsane-epkowa.so.1
-rwxr-xr-x 1 pippo pippo 620651 9 dic 11.12 libsane-epkowa.so.1.0.15
Last edited by quellen (2014-06-05 11:57:25)

How not to consider a missing field for external tables

My Oracle vers. is 10gR2
I've created an external table using this syntax:
create table ext_table
(a number(5),
b number(5),
c varchar2(1000))
organization external
(type ORACLE_LOADER
default directory FLAISTD
access parameters (records delimited by newline
fields terminated by "#"
(a char(5),
b char(5),
c char(1000)))
location ('file.csv')
My problem is this. I've got a file.XLS that I save as file.CSV Sometimes any row of the file.XLS misses of the last column and so in my file.CSV I can have something like this:
123#123#xxx
456#456
and when I try to perform a select * from ext_table I get an error because it expects a missing field.
How can I do? Can I "say" in the create table above something for warning that the last field might miss?
Thanks in advance!

Solomon Yakobson wrote:
Use TRAILING NULLCOLS:Oops, it is external table not SQL*Loader. So it should be MISSING FIELD VALUES ARE NULL:
create table ext_table
(a number(5),
b number(5),
c varchar2(1000))
organization external
(type ORACLE_LOADER
default directory TEMP
access parameters (records delimited by newline
fields terminated by "#" missing field values are null
(a char(5),
b char(5),
c char(1000)))
location ('file.csv')
Table created.
SQL> select *
2    from ext_table
3 /
         A          B C
       123        123 xxx
       456        456
SQL>SY.

SAP MDM Console not allowing to add new fields or load repository

Hi all,
We are in SAP MDM 7.1 SP06. I do have access to create table, fields, ports etc., And I also have access to load and unload repository.
But when I login to SAP MDM Console and repository, options to load repository --> immediate and update indices are disabled. This is happening for Add/ Delete Table/Fields/Port etc.,
However, if I login to repository using MDM console in another laptop or system using the same userid, I am able to perform all the operations mentioned above.
Can you please help me with any suggestions to fix this. I do not want to reimage my laptop now inorder to fix this.
I tried to uninstall and install mdm console again but in vain.
Thanks,
Rajesh

Hi Rajesh,
In the Main Menu you have a lock sign,click on that and unlock the view.
This should solve the problem.
Thanks,
Ravi

IPhoto 11: Will not allow me to select photos for upload

Hello my knowledgeable compadres. I have installed iLife 11 and am running Snow Leopard 10.6.6 on a MacBookPro. I have had no problems with iPhoto 09 but since I've upgraded to the latest version, I am unable to select photos to upload to email, facebook, web pages or anywhere else. Interesting variation is that some photos are selectable; others are not. They are all jpg format so I am at a loss. I can't select photos from within iPhoto to edit; I can't click and select photos from the photos icon in the finder; I can't select any photos from the dialogue between Facebook & iPhoto and it's driving me crazy. I've had my Mac since 2008.Does anyone have any ideas? Thanks! Bernardine

when I attempt to select the photo from the preview pane in iphoto, it either is inert or, allows me to select it but the photo goes to black with a grey alert symbol on it and disappears in either a close up view or edit window.
The exclamation point - ! - turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents. Your problem isn't selecting files, its that iPhoto can't find the file you've selected.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Why not allow notes or a field for departments?

Similar Messages

Maybe you are looking for