Why not create an external camera for the first iPad ?

This will resolve the issue to upgrade IO6 and still available for everyone as supplemental device; this can be used for intrusion detection, or take care of the baby, for examples.
Apple meet a problem, and can use it for the best of each other.
I used to use a lot of Apple products (1 MacBook, 2 iMac, 2 iPod, 1 iPhone, and 1 iPad) so I'm sad to start a rebellion again Apple...
Have an iPad without any internal video device is a must for people working in secret area, keep that in mind (and perhaps restart first iPad production)
Regards, Pascal

http://www.apple.com/feedback/ipad.html
We're all just fellow users here.
Regards.

Similar Messages

I have only 1 ipad device, can I create 2 icloud accounts for the same ipad?

I have only 1 ipad device, can I create 2 icloud accounts for the same ipad?

Of course.
To create the first iCloud account, open Settings > iCloud, type your Apple ID and follow the steps to set up iCloud.
Then, to add a second iCloud account, open Settings > Mail, Contacts & Calendars > Add Account > iCloud, type the second Apple ID and set up iCloud for this Apple ID.
Note that one iCloud account will work as the primary account and the other one as the secondary account. See > http://support.apple.com/kb/TS4020

Is there a way to create a fade only for the first loop?

I have a loop (Modern Guitar Rock 04), which I've extended out so it repeats four times. I select the Fade Tool and X-Fade for drag. I then drag just in front of the loop and onto it, which creates a fade. However, this also creates fades at the beginning of the repeating loops. Is there a way to create a fade only for the first loop?

The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

The warranty is only good in the U.S.
You woulod have to send it to someone in the U.S. They could take it in and if it is defective, then it would be replaced.

Why not create a separate mod for

Suggestion. Create a a new forum and move all mod related driver and question threads there. The fact is that it is only the most advanced users that play with these drivers and these drivers?does not come with support from Creative. It's hard for the average joe as well as for the forum moderators to have the modded driver among the usual forums. These forums?are primarily?for discussing the original drivers found on Creative download sites and retail CD. Mixing these only confuse many users.

Because Apple has decided that the 3G is at the end of it's life. Just like they made the decision that the original iPhone would not get iOS 4.
Anything more is speculation which is not permitted here via the Terms of Use.

I am trying to set up Recipefox to export MasterCook 11. What configurations should be "export" box. I am also getting an error message that Java.lang.Runtime exception. could not create a new folder for the writer.

When Igo to "Export them" a box shows that my configuration paths are not correct.

Support for the RecipeFox extension is over here: <br />
http://recipetools.sourceforge.net/phpBB3/index.php

I'm Trying this New CAM for the First Time 7240

Brokers, Inc. Specializes in Sourcing Operating Systems and Application Software from liquidators or Overstocked suppliers. We then offer these incredible findings to the public at unbelievable savings...
New Microsoft Windows 2000 Professional
Web Software Brokers...New Just Released version, this is the real thing. You can get it from us, here now!!! This Microsoft Windows 2000 Professional or NT 5.0 as it's known to the industry is an OEM version of the OS and is distributed to manufacturers. The combined features of Windows® 2000 Professional create the mainstream operating system for desktop and notebook computing in all organizations. Microsoft took the best business features of Windows 98-Plug and Play, easy-to-use user interface, and power management-and made them better. Plus they integrated the strengths of Windows NT®-standards-based security, manageability and reliability. Thinking of upgrading or buying a new PC, don't wait upgrade now. Only $169.00 + P&H
New Microsoft Office 2000 Small Business
Web Software Brokers, Inc. ...New Version, this is the real thing. You can get it from us, here now!!! Microsoft Office 2000 Small Business...Only $226.00 + P&H
New Microsoft Office 2000 Professional
Web Software Brokers, Inc. ...New Version, this is the real thing. You can get it from us, here now!!! Microsoft Office 2000 Professional...Only $299.00 + P&H
WE ACCEPT VISA, M/C, AMEX, DISCOVER OR CASHIERS CHECK.
Wayne Carson
Brokers, Inc. ~ Providing Affordable Software & PCs!
(800) 970-7866
bibtxvlgzfojinbblfihnqflxxdqrydjmwsprnhzwgjdlctlhcfejtwhqbviciswgsvmrvlzej

I'm receiving the "an unexpected error occurred" notice.
There are several things that you can do to try to resolve the bug in Mavericks that causes this issue.
The first is to make sure that you have set IPv6 to "link local only" for both WiFi and Ethernet. Part of that process is clicking "OK" to confirm, but then you must also click "Apply" in another window for things to "stick". This is an easy step to miss...and a lot of users are missing it.
Please confirm that you have set "link local only" for both WiFi and Ethernet and that you have clicked both OK and Apply to save the changes.
You would want to restart your Mac after you make these changes.
If you are still having difficulty, the next step would be to try an iPad or iPhone for the setup, if you have one handy.
But, before you do that, we need to understand how you are trying to set up the Time Capsule. What will connect to what? What is the make and model number of your modem?

Page with PartialTriggers is not working when it loads for the first time

Hi All,
I am experiencing unexpected behavior when using partial triggers and this recurres every time the page loads and the second time it works fine.
Here is the requirement, The page has a check box, when checked, two text boxes should be disabled. When unchecked the two fields should be enabled.
(The fields are Start Date Time and End Date Time in the code below). I am also handiling the Date Validations on value change listener of Start Date time and have no issues on that.
When I try to enter the dates on page load (The check box - "Process Full Indicator" is not selected), I enter the required fields (PEID, Dates and check the Process IAF and Process SMS check boxes and click on the ProcessRFI Button, the date fields are emptied and nothing happens. When i redo the same thing the second time, it works.
The button invokes a BEPL process.
One of the links suggested that I use the partialTrigger tag in the parent layout, I used in the panelFormLayout and it sill did not reflect.
I am facing the same issue in an other page that is reteriving data from a DB Table. As I notice, both the pages are invoking dataControlls. Not too sure if it is related.
Kindly help.
<af:panelFormLayout id="pfl1"
inlineStyle="font-weight:bold; height:181px;"
>
<af:inputText value="#{bindings.PEID.inputValue}"
label="PEID"
required="#{bindings.PEID.hints.mandatory}"
columns="#{bindings.PEID.hints.displayWidth}"
maximumLength="#{bindings.PEID.hints.precision}"
shortDesc="#{bindings.PEID.hints.tooltip}" id="it1"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.PEID.validator}"/>
</af:inputText>

<af:inputDate value="#{bindings.StartDateTime.inputValue}"
label="Start Date Time"
shortDesc="#{bindings.StartDateTime.hints.tooltip}"
id="id1" inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.input_startDate}"
valueChangeListener="#{backing_ProcessRFI.assignFromDateValue}"
autoSubmit="true"
required="true" immediate="true">
<f:validator binding="#{bindings.StartDateTime.validator}"/>
<af:convertDateTime pattern="#{bindings.StartDateTime.format}" type="both"/>
</af:inputDate>
<af:inputDate value="#{bindings.EndDateTime.inputValue}"
label="End Date Time"
shortDesc="#{bindings.EndDateTime.hints.tooltip}"
id="id2" inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.input_endDate}"
partialTriggers="id1"
required="true"
valueChangeListener="#{backing_ProcessRFI.checkNullStartDateValue}"
autoSubmit="true" immediate="true">
<af:validateDateTimeRange minimum="#{backing_ProcessRFI.dtFromDate}"
hintMinimum="End date should be greater than the Start Date"
/>
<f:validator binding="#{bindings.EndDateTime.validator}"/>
<af:convertDateTime pattern="#{bindings.EndDateTime.format}" type="both"/>
</af:inputDate>
<af:selectBooleanCheckbox value="#{bindings.ProcessIAFIndicator.inputValue}"
label="Process IAF"
required="#{bindings.ProcessIAFIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessIAFIndicator.hints.tooltip}"
id="it2"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.ProcessIAFIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:selectBooleanCheckbox value="#{bindings.ProcessSMSIndicator.inputValue}"
label="Process SMS"
required="#{bindings.ProcessSMSIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessSMSIndicator.hints.tooltip}"
id="it5"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.ProcessSMSIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:selectBooleanCheckbox value="#{bindings.ProcessFullIndicator.inputValue}"
label="Process Full Indicator"
required="#{bindings.ProcessFullIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessFullIndicator.hints.tooltip}"
id="it4"
inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.processFullIndicator}"
valueChangeListener="#{backing_ProcessRFI.handleFullIndicator}"
autoSubmit="true">
<f:validator binding="#{bindings.ProcessFullIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:panelStretchLayout id="psl1" inlineStyle="height:40px;">
<f:facet name="center">
<af:panelGroupLayout layout="horizontal"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
id="pgl2">
<af:commandButton actionListener="#{bindings.ProcessRFI.execute}"
text="Process RFI"
disabled="#{!bindings.ProcessRFI.enabled}"
id="cb2"
attributeChangeListener="#{ProcessRFI.processResult}"/>
<af:resetButton text="Clear" id="rb1"/>
<f:facet name="separator">
<af:spacer width="10" height="10" id="s2"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
</af:panelFormLayout>

Hi John,
My page is not a part of a task flow. The whole app is an Admin app comprising of multiple individual pages navigated using Menu.
I have tried to run this page individually on my local machine as well as when deployed on the WLS server. The behavior is the same.
Kindly advice,
Thanks,
Ram

How do I create a calendar event for the first Sunday of every moth?

Trying to create an event on my iPhone 4 (iOS 5) calendar that repeats on the first Sunday of every month. Is there a way to do this?
Thanks

JohnnyDawg wrote:
Hopefully we will get full iCal functionality on the iPhones and iPads one day.
It would be nice, but don't hold your breath. But look at 3rd party calendar apps such as Week Cal or Pocket Informant.

Detail rows not fetched in af:iterator for the first time

Hi,
I have a table with 3 columns. Column 3 is a detail record with column 1 being the parent.
Column 3 is displayed in the table using af:iterator #{row.detailRows}.
The detail records are created in a different page.
When I add the detail records to the master in this page and navigate to the page where the table is rendered, sometimes I do not see the column 3(detail rows) displayed immediately. The iterator #{row.detailRows} returns no rows.
When I go back to the previous page wait for sometime and navigate to the page with table, I see the detail rows.
This is happening intermittently and not always.
Why is the iterator returning no rows sometimes(even though it returns values after a while)?
When this happens, I checked the back end data and all the data is inserted into the db tables immediately.
Jdev version: 11.1.1.4.0
Any help is appreciated.
Thanks!

Srini,
Should I set the 'Target Data Source' to the detail iterator?
I want detail rows displayed in column 3 for all rows in the table on page load, not on row selection.
The page on load should display the table in below manner, irrespective of row selection all rows' detail values should be rendered.
S No.
Master key
Detail values
1
master1
detail1-1
detail1-2
detail1-3
2
master2
detail2-1
detail2-2
detail2-3
detail2-4
3
master3
detail3-1
detail3-2
detail3-3
Thanks!

Can not get JSP to work for the first time.

This is my first attempt to write JSPs. When TOMCAT attempts to render my first java server page TOMCAT reports the following two errors:
org.apache.jasper.JasperException: Unable to compile class for JSPerror: Invalid class file format in C:\j2sdk1.4.0_01\jre\lib\rt.jar(java/lang/Object.class). The major.minor version '48.0' is too recent for this tool to understand.
C:\Program Files\Apache Tomcat 4.0\work\Standalone\localhost\JobEntry\HeadingExample$jsp.java:0: Class java.lang.Object not found in class javax.servlet.GenericServlet.
package org.apache.jsp;
I am on an XP box, running jwsdp-1_0_01, j2sdk1.4.0_01, and TOMCAT 4.04.

You might want to try downloading a newer Tomcat Version 4.1.18 works well. Follow the URL below. I have tried this version with the SDK 1.4 in the past, without problems. It might be that your older version of Tomcat just doesn't like the 1.4 SDK. Would take 5 minutes max on a decent http connection to DL and install.
http://jakarta.apache.org/site/binindex.cgi

When will there be an update for the first iPad as new apps will not work on it now

When will there be an update for iPad as most of the new will not run on old iOS 5.1.1

App Store: Downloading Older Versions of Apps
http://tinyurl.com/meqxplg
App Store: Install the latest compatible version of an app
http://support.apple.com/kb/ht5919
Apple’s iOS App Store now offers ‘last compatible’ versions of apps for older devices
http://appleinsider.com/articles/13/09/17/apples-ios-app-store-now-offers-last-c ompatible-versions-of-apps-for-older-devices
 Cheers, Tom

Updates for the first iPads

Help

If your iPad is running a version of the iOS earlier than 5.0 you need to connect your iPad to the computer you normally sync with and start iTunes on the computer. Under General or summary there is a check for updates choice.
If your iPad is running 5.0 or later you can update over the air by using the Settings app.
Settings > General > Software Update.
The latest version of the iOS that an original iPad can handle is iOS 5.1.1

Pr Pro CC 2014 not startup (for the first time)

Premiere CC 2014 wil not startup on my iMac. (for the first time)
It shows:
" Adobe Premiere Pro coult not find any capable video play modules. Please update your video display drivers and startup"
My iMac:
O.S. 10.9.5
3,5 GHz i7
32 GB 1600 MHz DDR3
Video:
NVIDIA Geforce GTX 780 m 4096 MB
I foud a CUDA driver:
version 6.5.18
What to do?

Hi,
Please go this location on your computer:
Click on Go on the top- Go to folder- Type ~/library then go to application folder- rename the adobe folder to old adobe
go back to ~/library then go to preferences and rename the adobe folder to old adobe
go to documents and rename the adobe folder to old adobe.
After doing this you will loosed your synced settings and customized keyboard short cuts and effects if any.
Thank You
Arjun

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

Why not create an external camera for the first iPad ?

Similar Messages

Maybe you are looking for