Why not enable left click brush resizing in liquify tool?

I'm not sure if it can be changed, but, I've never understood why all the menus to change the brush size can only be accessed from te side of the screen.

You can Alt/Opt right click and drag to resize the tool brush sizes in Liquify.  It works really well and is very fast.

Similar Messages

  • I can't use home sharing because it says Bonjour is not enabled.  So I went to administrative tools and started it.  Restarted my computer and home sharing still isn't working

    I can't use home sharing because it says Bonjour is not enabled.  So I went to administrative tools and started it.  Restarted my computer and home sharing still isn't working

    I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

  • Inconsistent Alt - Right Click Brush Resizing in PS CS5

    Anyone else seeing the new brush sizing gestures working inconsistently?
    If I hold down the Alt key and click the right mouse button...
    - Sometimes I see a red brush facsimile that I can resize or make harder/softer by moving the mouse right/left or down/up.  I assume this is the intended behavior.
    - Sometimes I see just an outline of the size, which I can resize by moving the mouse right/left.  Hardness may be affected, but it's impossible to tell.
    - Sometimes I can't use the gestures at all; Alt + Right Click simply does nothing.
    I haven't been able to put my finger on it or investigate it in any great detail because I'm usually working on something and want to continue concentrating on that something.  Usually I'm using the Spot Healing brush, or the Clone tool, or the Eraser tool, or the Paintbrush tool.
    Complicating matters is the fact that I use both the 32 bit and 64 bit Photoshop CS5, and it's possible I have some setting different in one than the other.  I've been trying to use them kind of interchangeably just to get to know them.
    I just started both 32 bit and 64 bit versions (in succession) and tried all the above tools, and found that the second problem above was manifesting only in the 32 bit version.  Then I noticed my OpenGL settings had disappeared again.  I had thought the ATI 10.5 drivers had solved that, but apparently not - at least not completely.  So I'm back to using the AllowOldGPUs_ON registry fix until the next ATI driver update.  Sigh.
    After the registry fix, and verifying OpenGL settings are "Advanced" on both 32 bit and 64 bit versions, I see the red brush for all the above tools.
    I'll watch for the gestures going away again, and post the edit log (which I have enabled for detailed text logging).
    -Noel

    Anyone else seeing the new brush sizing gestures working inconsistently?
    If I hold down the Alt key and click the right mouse button...
    - Sometimes I see a red brush facsimile that I can resize or make harder/softer by moving the mouse right/left or down/up.  I assume this is the intended behavior.
    - Sometimes I see just an outline of the size, which I can resize by moving the mouse right/left.  Hardness may be affected, but it's impossible to tell.
    - Sometimes I can't use the gestures at all; Alt + Right Click simply does nothing.
    I haven't been able to put my finger on it or investigate it in any great detail because I'm usually working on something and want to continue concentrating on that something.  Usually I'm using the Spot Healing brush, or the Clone tool, or the Eraser tool, or the Paintbrush tool.
    Complicating matters is the fact that I use both the 32 bit and 64 bit Photoshop CS5, and it's possible I have some setting different in one than the other.  I've been trying to use them kind of interchangeably just to get to know them.
    I just started both 32 bit and 64 bit versions (in succession) and tried all the above tools, and found that the second problem above was manifesting only in the 32 bit version.  Then I noticed my OpenGL settings had disappeared again.  I had thought the ATI 10.5 drivers had solved that, but apparently not - at least not completely.  So I'm back to using the AllowOldGPUs_ON registry fix until the next ATI driver update.  Sigh.
    After the registry fix, and verifying OpenGL settings are "Advanced" on both 32 bit and 64 bit versions, I see the red brush for all the above tools.
    I'll watch for the gestures going away again, and post the edit log (which I have enabled for detailed text logging).
    -Noel

  • Why does ctrl+Left click a link open a new window? It should open a new tab in the current window.

    When I try to Ctrl+Left click to open a link in a new tab, it will open it in a new window instead. Then while in the new window if I Ctrl+Left click a link it will open a new tab in the second window. If I then go back to the first Firefox window and Ctrl+Left click a link the second firefox window will pop up and the new tab will be created there. Why won't the Ctrl+Left click work when only one window is open?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Touchpad not working, left click acting like right

    Hi - I apologize if this was already asked, but I couldn't find it. I have a G Series laptop (I'm at work so I don't have the specifics on me) and as of Friday night, out of nowhere, the touchpad stopped functioning properly. All clicks responded as if I had was right clicking. Needless to say, this was annoying. I tested all of my touchpad settings, uninstalled and reinstalled, tried new drivers, rolled back drivers, system restore, etc. and nothing worked. When I plug in a USB mouse, it still works perfectly, if that helps at all. But whenever I used the left click below the touchpad, it acts as a right click (however, the touchclick, or whatever it's called on the touchpad still works as a left click). I called and was given the advice you might expect...hard reset followed by a system recovery if that didn't work. The hard reset didn't work (big surprise), and I really don't want to lose my stuff; since I can still use the USB mouse, it's not the absolute end of the world. But I'm still irritated by it. It's a month away from the warranty being over, so I need to get moving on this. But I don't know how helpful HP is going to be with this (judging by their first bits of advice, not very). Any suggestions? This literally happened out of nowhere. I seem to remember this happening sometimes on my desktop, but that always managed to remedy itself by clicking some buttons, shutting down, etc. This time, that's not doing the trick. I'd appreciate any insight or help into this issue. Thanks very much!

    Had the same problem, what I did works just as well but it's an adjustment. Go to touchpad settings (under 'Synaptics Touchpad v6.5')then click on buttons, manual for right mouse Instead of the normal right button setting, I switched it to button completely disabled.  Now your mousepad only recognises left clicking and if you want to use the right mouse button, you lick once with the touchpad on the item you want, then click the button on the right of 'alt gr' (on the left of 'ctrl')this has the same ability. Inias

  • Link not opening , left click , right click nothing !!

    I used safari , chrome and firefox ...I click on the link nothing happens , right click , open in new tab , still the same !!
    I created a new user , nothing !!
    anyone has any idea how to solve this issue ?

    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - Mavericks
    Safe Mode - About

  • Brush Resize in Liquify - Photoshop CC

    I try to resize my brush in liquify with my pen, when I resize a few times, the brush pressure resets. I'm just about to explode of rage.
    Also is there are way to disable the ALT+ UP/DOWN motion to change the pressure as well? I just want the brush to change size with ALT+ Left/Right motion
    Thanks
    Video card drivers are up to date.

    I'm using the Intuos 4.
    I don't use pen pressure in liquify.
    I have this issue with Photoshop CC. I tried installing CS6 and I don't have the issue there.
    For obvious reasons, I'd like to use the latest Photoshop, so I'd like to find a solution even though CS6 is doing the job for now.

  • Brush resize in Liquify doesn't work

    Mac OS X 10.10 (fully updated!)
    Photoshop CC 2014 (latest release!)
    Wacom Intuos 5 Medium (newest drivers!)
    Normal brush increase / decrease with a keystroke setup of [ and ] works fine.
    Opening liquify filter and try to increase or decrease the brush doesn't work at all. Seems the keystrokes in the liquify filter are different (and unknown?!) to increase & decrease the brush size but WHY?

    Solution found:
    Setting up the Wacom Intuos 5 and Photoshop CC 2014 to...
    Brush decrease: #
    Brush increase: NumPad *
    Keyboard language: German
    Works with normal brushes and in the Liquify filter.

  • Support for non-native left-click pull-down menus?

    Greetings. I've not been able to find a component for AS3.0
    in Flash CS3 that would let me do what I would very much like to
    do. I don't wish to re-invent the wheel, but I've not seen anywhere
    that the wheel exists.
    I understand that AIR provides native menus, but I wish to
    create an app that does not use the system native menus. I have
    several justifications for this desire, the biggest of which is
    that I want the menus attached to the app when viewing in MacOS X,
    and I do not want the standard MacOS X menus. I do want the
    standard menu to be up there as it is for all applications, but I
    want my application specific menus connected to the app and NOT
    cluttered with the Standard menus and items. My app is a tool for
    developmentally and behaviorally disabled children and it needs to
    be a) identical on all platforms, b) simple, with only my menu
    choices, c) customized with some non-menu items.
    My application already has it's own menu bar.
    I've considered subjugating the context menu portions of
    flash (or trying to) by somehow disabling right-click, enabling
    left-click, forcing it to open not where the mouse is, but where I
    tell it to (namely left justified with the button in the menu bar,
    and immediately beneath it. I'm not even certain if this is
    possible, and it's a non-starter anyways if the 'settings'
    menu-item cannot be removed.
    This seems to me to be a pretty common thing that people
    would desire, and I don't understand it's lack.
    The idea of writing my own classes to duplicate behavior such
    as easily adding child menus to several depths, separators,
    animations, keeping track of clicks and mouse-overs and which
    child-menus are extended... terrifies me a bit, especially as I
    know my programming would not be as efficient and well-thought out
    as a system incorporated into the API by the Adobe dev team.
    Thanks for any assistance.

    Native menus encompass more than just the Mac application
    window and the MS Windows window menu. You can display a native
    menu anywhere on the stage using the NativeMenu class display()
    method. This sounds like it would do at least most of what you
    want.
    Also, in AIR, the context menus do not have built-in items.
    The context menu will not even display by default.

  • On Screen Liquify Brush Resizing Issue

    Hello
    I love screen brush resizing feature (alt+right click drag) added since version CS5, it works perfect I can say to be addicted to it.
    But I believe after some of the recent Photoshop CC updates the behaviour of brush resizing in Liquify menu changed. Now I can describe it as lagged, graduated, it can freeze forcing me to drag the cursor farther (I use wacom tablet). The same time brush resizing outside of Liquify menu works perfect.
    Can the problem be associated with my video card?
    I will post the same message to photoshop.com as well, just want to be noticed.

    It might be an issue specific to your system, as you mention.
    Brush resizing (with a mouse) in the Liquify filter for me is perfectly responsive - smooth and quick, just as on the main Photoshop document display.
    -Noel

  • Why not a New Posts link

    Other forums I belong to have a New Posts link on top of their page so one can see the most recent posts. Why not here?

    Click here for it.
    (45353)

  • I can not right click "open in new tab" nor open in new window, in my bookmark file.the bookmarks are all there, but I have to open a tab first then left click to open an item. Why can't I right click? The options are there, but not highlighted/clickable.

    I can not right click "open in new tab" nor open in new window, in my bookmark file.the bookmarks are all there, but I have to open a tab first then left click to open an item. Why can't I right click? The options are there, but not highlighted/clickable.

    now it is working?! Go figure. Yeah! Thanks anyway......

  • My Left-click on mouse is not working on mac os 10.8.2 mac mini. Please help ?

    Thank you for reading and helping out !
    All of a sudden, my left click on microsoft optical mouse stopped working. Then it worked for sometime then permanently stopped working after an hour. (its been 24 hours now). It was working fine before.
    Here is what I have tried so far.
    Tried Replacement optical mouse, which was not detected.  so can't even use a replacement mouse.. it only seems to recognize original mouse and respond to it only.
    I have turned Bluetooth off so that shouldn't be a cause.
    unplugged keyboard  and still left click on mouse not working.
    unplugged computer and all cables for more than 6 hours.. still not working...
    couldn't zap pram (for some reason being a microsoft keyboard ?? would you have proper instructions on how to to do this in windows keyboard??? )
    My Specs: mac mini 10.8.2 with microsoft ergnomic keyboard and basic microsoft optical mouse.
    i appreciate any help you would provide to get this solved!
    Thank you.

    Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality

  • Why firefox 3.6 downloads all of the files again after restartarting the browser from a website if the "clear history when Firefox closed" is not Enabled?

    We have a corporate website, we officially support FF3, FF4, IE8 and IE9. Our web site is quite big, so we really need browser caching, first time page load is around 15 seconds. With files in the cache getting new page is less than a second.
    Everything works perfect except with FF3. With FF4, IE8, IE9 if we are on the website, clicking everywhere is fast, the page is in the cache. If we restart the browser, it is still fast, it loads files from the cache.
    But with FF3 we have a problem. Every time we restart the browser, it is loading the files again from the server, instead of using the local cache (checked with Firebug). I can reproduce the problem anytime, it is the same with every FF3 instances. I double checked, the "clear history when Firefox closed" option is not enabled.
    Could you advise please how to use the local cache either after browser restart?
    Thank you!
    Chris

    Just read that the default memory storage on FF is set to 5 mbs. You can up that by clicking on tools, advanced and overriding the default and set it to 50 mbs (if you use lots of tabs) or 10 mbs (if you use just a few).
    I open a blank tab and clear the cache periodically, while I am working. I can have several tabs open and watch videos on Youtube, by doing this. Have you cleared your cache?
    Since I have an older computer, I've also used CCleaner for years. I use it often, but always before signing off. You can get it free...search for CCleaner, download from Pirifoam free. I didn't change any of the settings and it clears crap left behind from uninstalling programs, clears all browsers at once of: cookies, history, passwords, etc. I love it!
    I had freezing, before using the "open blank tab, clear the cache" thing. Now I have no problems. Plus, as I said...you can change the default memory usage for FF and that should help too.
    Hope this helps! Good luck! :)

  • Trackpad left click not working

    Hi
    The left click on my trackpad, bluetooth or usb mouse is not working anymore.
    Macbook 2006 core2duo
    OSX 10.6.8 (snow leopard)
    I tried:
    - reset PRAM(apple+option+p+r)
    - without battery
    - boot in safe mode (shift)
    Without succes.
    Also tried to disable The trackpad with:
    - defaults write com.apple.driver.AppleBluetoothMultitouch.trackpad USBMouseStopsTrackpad 1
    But the trackpad is still enabled also after log out an in again.
    The option in the "Universal Access" settings is not enabled as well.
    How can I enable this option "ignore trackpad when mouse" without a mouse?
    Tab does not work.
    Any other suggestions what I can try to fix?
    ps. I was in the apple store and they want 100euros for sending it to the service center)

    also tried:
    - repair disk (diskutil repairPermissions disk0s2)
    wiyhout success

Maybe you are looking for