Why not found "ligp.dll" in Tuxedo /WS 8.0 ?

Environment:
Before
1.Power Builder 5
2.Tuxedo Client 6.4
3.Tuxedo Server 6.4
Afeter
1.Power Builder 8
2.Tuxedo Client 8.0
3.Tuxedo Server 8.0
Before to upgrade software, I use power builder to call function "tuxputenv" from
"libgp.dll" in path c:\tuxedo\bin but
after upgraded software, My application have error, cause of file libgp.dll does
not have.
I don't know about DLL library rename in Tuxedo client 8.0 or that "libgp.dll"
DLL library in tuxedo client 6.4 has obsolete.
And I found "libgpnet.dll" in tuxedo client 8 but not sure it's the same with
"libgp.dll" in tuxedo client 6.4.
Please...give me your advise for this case.
Thanks you for your advise.

Try libengine. The libraries were reworked in 7.1.
Sutep wrote:
Environment:
Before
1.Power Builder 5
2.Tuxedo Client 6.4
3.Tuxedo Server 6.4
Afeter
1.Power Builder 8
2.Tuxedo Client 8.0
3.Tuxedo Server 8.0
Before to upgrade software, I use power builder to call function "tuxputenv" from
"libgp.dll" in path c:\tuxedo\bin but
after upgraded software, My application have error, cause of file libgp.dll does
not have.
I don't know about DLL library rename in Tuxedo client 8.0 or that "libgp.dll"
DLL library in tuxedo client 6.4 has obsolete.
And I found "libgpnet.dll" in tuxedo client 8 but not sure it's the same with
"libgp.dll" in tuxedo client 6.4.
Please...give me your advise for this case.
Thanks you for your advise.

Similar Messages

Inst.error "proc.entry GetProcessImageFieNameW not found in DLL PSAPI.DLL"

During installation of SoaSuite v10.1.3.1 (as preparation for later v10.1.3.4) I got an error popup
showing
"procedure entry GetProcessImageFieNameW not found in DLL PSAPI.DLL"
After I clicked OK the installation resumes and was finished (successfully ?).
What does that mean? Is it only a warning or do I have to start a
repair action after installation?
Peter

This can be ignored it is a known issue for basic installs. Basically is it not liking the version of the dll.
You don't need to reinstall.
There is a workaround if you don't want to see it for future installs:
Once you start the installer (OUI), locate the directory it is using as described "C:\Documents and Settings\YOUR_ACCOUNT\Local Settings\Temp\OraInstallYYYY-MM-DD_HH-MM-SSAM" Copy your new PSAPI.DLL (eg:5.1.2600.2180) into place and mark it as READ ONLY. This will prevent OUI from over writing it with its older version (5.0...).
cheers
James

My photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help

my photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help

I checked my windows 7 pro machine for the module I see many copies if the DLL with different dates two different sizes all are version 11.0.51106.1 so I guess there are 32bit and 64bit versions. Some are in Adobe folders some in Wacom folders ad in two windows folders including system32. I do not know if there is and entry point "_crtCreateSymbolicLinkW" in it.

How do i solve the following problem. By starting up the message appears: could not found CoreFoundation.dll. Windows error 7

By starting up the following message appaers: could not found CoreFoundation.dll.
Windows Error 7
How can I solve this problem?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

Hey guys, new to the board here and pretty much at the end of my rope.
Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
Photoshop.exe - Entry Point Not Found
The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
I've had photoshop on it for about a year with no problems.
Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
Someone save me!

Hi Chris, thanks for chiming in on my problem.
I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
Arun

Please try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta

Itunes wont start, i tried to repair with a reinstall and i still get an error saying this file is not found, "MSVCR80.dll"

somehow my itunes program became corrupted when i tried to update my Quicktime player. the upgrade was interupted and aftward when i tried to boot my itunes, an error window popped up saying that this file could not be found, "MSVCR80.dll " I attempted to reinstall a repair about a dozen times but that's not fixing the problem. i do not want to uninstall as i may lose data that hasn't been synched yet. how can i get this file from Apple and manually instal it?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Entry point not found msvcr110.dll error

I have Photoshop CC and Lightroom CC both of which were working fine until I installed a PIE Primefilm XA scanner with CyberviewX software. The programs will not open since ibstalling CyberviewX. The following error appears: PSCC has a Photoshop.exe-Entry Point Not Found (The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll. Any help would be much appreciated. This error only seems to be associated with CS CC and LR CC.

Had the same problem with Lightroom 6. This solved the problem
The Program can't start because MSVCR110.dll is missing from your - Microsoft Community

Entry Point Not Found "pluginutils.dll"

Upgraded to Jabber 10.5 and now users are getting "ciscojabber.exe - entry point not found" can not be located in the dynamic link library PluginUtils.dll.

In our case, problem was in previous version of Cisco Jabber. Jabber 9.6.1 was not uninstalled correctly. Old Jabber client was successfully removed and problem is gone.

Couldn't start after effect cs4 ( AfterFX.exe - entry point not found ) ( aif_ogl.dll )

Please Help me!
I Couldn't start after effect cs4. I also uninstalled and reinstalled it many times but it's giving me this error :
AfterFX.exe - Entry Point Not Found
The procedure entry point wglSwapMultipleBuffers could not be located in the dynamic library ........................ \Aif_ogl.dll.

It means your graphics hardware is not compatible. Update the graphics driver and configure it suitably.
Mylenium

ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!

hello, can somebody please help me...
Everytime i open iTunes it comes up with this error message:
The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
Please help me, Thanks!

*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

TREXFilter.exe - Entry Point Not Found / sccex.dll

Hi,
Recently we've updated our TREX to SAP Netweaver 04 Version: 6.1.16.02 Build: 6116000416
When logging on to the TREX server several popups show up with errormessage:
TREXFilter.exe - Entry Point Not Found
The procedure entry point CUCheckForEmbeddedObject could not be located
in the dynamic link library sccex.dll.
In EP
(SAP Netweaver 04 EP6 6.0.16.0.0
NW 04 EP6 KMCollaboration 6.0.16.1.0)
it's not possible to index any index (index administation).
Server status in TREX monitor is all green.
Anyone seen this before?
Any help would be welcome.
Regards,
Mark

Hi,
I have the same issue with TREX 6.1 revision 25 now...
Message on OSS open but still no answer.
The pop-up is preventing TREX from processing the outstanding requests in the Queue...
Any ideas?
Kr,
Michael

Recently downloaded latest version of iTunes software, afterwards, while trying to sync iphone with PC received this error message: Unable to Load Resource not found; SyncUICoreLocalized.dll; please advise, thank you

Recently upgraded PC with latest edition of iTunes (1/30/2014), afterwards, received this error message while attempting to sync iphone with PC: Unable to load, resource not found, SyncUICoreLocalized.dll

THIS HAS EVERY APPEARANCE OF A SOFTWARE GLITCH BY APPLE ... So first suggestion is NOT to begin reinstalling various software but to await some answer & fix from Apple. Too many have same problem on various systems, in my view (I am not an Apple rep but have certainly faced many glitches over the years).
PS - LOTS of Apple software problems these days, including many people having their Contacts shredded. What's going on with Apple?

Installing NIDAQ 7.5 cause error in VB6 "nidaq32.dll not found"

Hi,
Anyone had this problem? I installed the NI-DAQ 7.5 drivers because
I've been trying to get an application working with my 6533 card which
just had DAQmx support added for it in 7.5. I have old code in VB6 that
makes straight driver calls that I was trying to migrate to VB.NET. So
I installed the new drivers and now I can access the card fine in
VB.NET, however, my old VB6 application no longer works. It gives me
the following error:
Run-time error' '48':
File not found: nidaq32.dll
I went searching and the nidaq32.dll is still sitting in my
Windows/SYSTEM32 folder, so that should be fine. The only thing I've
changed since it stopped working is the installation of NI-DAQ7.5. I've
tried reinstalling the driver. I've also tried overwriting the three
nidaq32.bas files that I had in my project directory with the new ones
in the nidaq/includes folder. Anyone else have this happen and/or know
a solution for it?
Thanks,
Chris

Dear Chris,
Please see this post.
Have a great day!
Marni

HT201253 Sync problems x2 - duplicates and SyncUICoreLocalized.dll not found

I have sync 2 issues:
On my work computer, I typically only sync Outlook contacts with my iPod Touch.
1 - I get an error but it seems to sync anyway... Resource not found SyncUICoreLocalized.dll not found
2 - iTunes does a less-than-stellar job of dealing with duplicates when syncing contacts with Outlook. I'll get some conflicts but have to search and clear out many more, despite using 'overwrite'.
WinTel machine, Win7
iTunes v11.x so far
iPod Touch 64gb 5gen

Bump!
Now, after following usual App support procedures, I've all my OLD notes but none of the NEW ones.
PLUS - Notes isn't uploading to my Mac.

Why not found "ligp.dll" in Tuxedo /WS 8.0 ?

Similar Messages

Maybe you are looking for