Why not make the Detail Navigation column in SDN website?

I wonder the SDN Team can make the Detail Navigation column like in the portal, which can be adjusting size and minimize. As I always have to hold my mouse to move the page to the right when reading Weblog and Post Thread.
Kent

Hi Kent,
The left hand navigation is now collapsible. See Craig's blog:
/people/community.user/blog/2007/01/15/are-you-watching
Hope you like it, Mark.

Similar Messages

2.0 GHz Intel Quad core i7 vs. 3.7 GHz Intel Duo Core i7 Processor: Why not make the Quad Core 3.7GHz?

I don't really understand processors, but is the 2.0GHz Quad Core i7 really a better processor in terms of performance? If it has 4 cores why not give it greater processing speed like 2.7 or 3.0 GHz?
I am asking because I am thinking about getting the high end Mac Mini, but I see that it's processor runs at 2.0GHz and the others in the line run at 2.5 and 2.7 respectively. Why is this?

I'm really oversimplifying here, but...
Let's just assume that each core runs at full speed all the time, the total performance of that processor would be the sum of the running totals of each core:
Duo Core i7 = 2 (cores) * 2.7 GHZ = 5.4 Ghz total processor power
Quad Core i5 = 4 (cores) * 2.0 GHZ = 8.0 Ghz
Like I said, oversimplified. But, you get the point. Not to mention, most apps still aren't optimized, so at a given time they only use a single core anyway. In this case, it'd be more beneficial to have more cores, since they would (hypothetically) be able to run more simultaneous processes (four vs. two in your case).
I gues the greater question is: what were you planning on using the mini for? Most CPUs go underutilized anyway, so you may be better off getting a 2.0, and maxing out your RAM and maybe adding a SSD. Those upgrades (the SSD especially) will result in a very noticeable increase in performance.

HT4623 Why not make the iOS 7 available to older iPod touch users?

I am pretty angered. I purchased my 16 GB iPod in May 2013 under the assumption that it was the newest iPod model, only to find out now that it isn't. I was okay with that, until I learned I did not have Siri, and now, with it being that I cannot download the iOS 7.

All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory. The 4G iPod only has 256 MB

My device icon in the left column does not appear. so, I can not make the sync.

my device icon in the left column does not appear.
so, I can not make the sync

Device Not Recognised
For PC > http://support.apple.com/kb/TS1538
For Mac > http://support.apple.com/kb/ts1591

Expand all folders in the detailed navigation by default on click of Role

Hi All,
I have a requirement on expand all the folders in the detailed navigation by defalut when we click a Role in the Fist level navigation.
Please have a look about our requirement as mentioned below.
->Role1(First Level Navigation)
   ->Wokset1(Second Level)
       -> Folder1(Detailed Navigation entry Folder)
              -> Folder2
                   Page1
                   Page2
              ->Folder3
                   Page3
                   Page4
              -> Folder4
                   Page5
                   Page6
When the user clicks on Role1 then automatically all the folders in the detailed navigation should be expanded by default then user could see all the pages displayed in all folders. currently the functionality is collapsed all the folders by default in the detailed navigation then user has to expand the folders manually.
Regading this issue, i had seen couple of threads on the same but getting confusion what is the exact solution for the solution.
in those existing threads some people has mentioned that need to change code in the lightdetailnavigation.par or some other mentioned that it is not worked out even do the required changes in the code of light detail navigation part file. there is no clarity in the existing threads for getting the exact solution . please let me know what are the properties needs to be changed at folder level or workset level to make sure all the folders should be expanded by default in the detailed navigation??
Currently we are using portal 7.0 version.
Any pointers in this regard would be the great help to us??
Thanks in advance.
Regards,
PortalUser
Edited by: PortalUser100 on Jan 22, 2011 10:15 AM

Hi,
To expand all the folder by default, we need to set the property of the detailed navigation tree.
Open your framework page in the content administration.
Check on the detailed navigation check box and click on the properties button.
In the properties, set the value of initial state= OPEN .
This will expand all the folders by default.
Hope you understood.
Regards
Nishant

Dynamically changing the detail navigation

Hi all,
       can anyone please tell me how to change the detail navigation dynamatically..
Regards,
Jeyasingh Samuel

Hi Srinivasa,
There are 2 things you can do:
(1) You can simply set the invisible property for the iViews (I think this is what you want).
You create a settings page which lists all the iViews, and when the user clicks a button, the page gets all the settings for all the iViews and sets the invisibility property for all of them.
The invisibility property indicates whether to display this object in the TLN/DTN.
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, IPcdContext.PCD_INITIAL_CONTEXT_FACTORY);
env.put(Constants.REQUESTED_ASPECT, PcmConstants.ASPECT_SEMANTICS);
env.put(Context.SECURITY_PRINCIPAL, request.getUser());
env.put(IPcdContext.PCD_PERSONALIZATION_PRINCIPAL, request.getUser());
iCtx = new InitialContext(env);
//Create loop of all objects
    String pageID = "portal_content/DanielContent/DanRole/Folder1/Folder2/Page1";
    IPage myPage = (IPage)iCtx.lookup(pageID);
    myPage.putAttribute(IAttriView.ATTRIBUTE_NAVINVISIBLE,"true");
    myPage.save();
The above code is for a page, but you can do the same for an iView.
(2) If you iViews are in a page, and do not appear in the navigation tree, but you want to make them invisible, you can set this property on the iViews.
myIview.putAttribute(IAttriView.ATTRIBUTE_AVAILABILITY,IAttriViewValues.AVAILABILITY_VALUE_AVAILABLE);
myIview.save();
Either way, make sure to set the personalization environment variable when you do your PCD lookup, as shown above. Otherwise, the changes for one user will affect all users.
Hope this helps.
Daniel

Changing the Detailed Navigation link

Dear All,
I need to change the Detailed Navigation link so that it is right aligned and the arrow image is followed after the link.
Ex.    Sales Reports =>
when it is opened then the following should be the view
          Sales Reports *
                   Report1 o
                   Report1 o
Do let me know if this can be achieved by any theme settings; if not then what should be the approach for the same.
Regards,
Samir

Hi Samir,
This is not possible by just theme settings, For this you need to modify the Detailed Navigation Par file.
Download the the Detailed Navigation par file open the jsp page and saw the columns .
Regards,
Piyush

How can you set the default width of the 'Detailed Navigation iView'?

Hello,
we would like to reduce the default width of the 'Detailed Navigation iView' in order to save some screen space.
So far, we havn't found the right item in the portal admin to do this.
Any help would be much appreciated! Thanks in advance.
Frank Schülke, E.ON Ruhrgas, Germany

Hi Frank,
You can change the width of this navigation iview by changing the value of "defaultExpWidth" in the file WAandNAVPanel.js present in the par file com.sap.layouts.framework.par from default value 220 pixels to the value you want.
upload the changed par file and restart the server.
Hope this helps,
(if not do get back )
Regards,
Uma.
Do award points for helpful answers in SDN!!!!!!!:-)

How can I add an iView to the Detailed Navigation itself

How can I add an iView to the Detailed Navigation itself and hides the other hyperlinks?

To add an iview on the Detailed navigation side of a page:
1.Double click the page which brings up the page editor.
2.Click the Display dropdown box and choose Dynamic Navigation.
3.Add an ivew to it.Save and add the page to a role to see the results.
if this is not u wanted, post back here.
Regards.

Different links in the detailed navigation, based on URL alias

What I'm trying to do :
Based on URL aliases /irj/portal/individual or /irj/portal/business
I will dynamically add an UME group to the already logged in user.
Filter :
If clicking on /irj/portal/individual I will store "group=individual" in the context, and add UME group individual, if clicking /irj/portal/business I will store "group=business" in the context, and add UME group business and remove individual, and then redirect to the same URL.
Configuration
Each UME group has a one-to-one mapping to a Portal role.
I will place an ACL on the PCD content, based on group, hiding/showing aggregated folders, hanging under the roles.
Wanted end-result
Different links in the detailed navigation, based on URL alias.
My question is how you would implement the filter part, mentioned above ?
Portal app or J2EE servlet filter or something else ?

Hi sunil,
Create a JSPDynPage component(C) having 2 hbj:link whose hrefs point to these 2 iViews(A and B). U can get the href of the iView by previewing it(for A and B). Create an iview from the par component (C) and add it to the DLN so that it shows the links to ur iViews(A and B). U can make the Show Tray property of this iView (C) to false.
Regards,
Harini S

Why not make a phone that can hold two different s...

Why not make a phone that can hold two different sim cards ?

11-Jan-2009 10:18 PM
hermandh wrote:
Why not make a phone that can hold two different sim cards ?
I guess time will come...but I don't see the main point of having two sim cards on a phone at the same time?
Knowing the phone won't let this go on, Can you take up two calls at the same time? Probably not.
=)

Why not start the game set?

Why not start the game set? They curl up and can not be opened.( Iphone 5s, ios 8.1.2)

Post in your native language...the translation makes no sense in English.

When using Ip-address in EP URL, the Detailed Navigation menu doesnt open

Hi,
We are facing a strange situation where if we use the ip address in EP url (e.g. http://172.12.65.12:50000/irj) the Detailed Navigation menu does not open at all for all tabs, and also when we try to log off, the termination pop-up comes but after that nothing happnes and we remain at the same screen (from where we tried to log off).
However, when we use the host name in the url (e.g http://hostname:50000/irj) everything works absolutely fine.
Can anyone please help us with this.
Thanks & Regards,
Angad

Please check the Note 654982 - URL requirements due to Internet standards
The EP URL should be like this ..
http://<hostname_of_Portal server>.<Domain_name>:<http_port of WAS JAVA _CI>/irj
e.g http://myhost.sales.mycomp.com:50000/irj
The formulae to claculate the http port of WAS JAva CI is
50000+(100*Instance no of CI) or simply 5XX00, where XX stands for the 2 digit no representing the Instance number of the sentral instance.
If you dont know this number , there are other ways to find out this.
Priyabrata

BBP_MON_SC : does not show the details of the Shopping cart

Hi,
We are in SRM4.0 and Stack 11.
when we use the transaction:BBP_MON_SC to check the Shopping cart and get into the details, the system does not show the "details of the shopping cart".
The sequence of the steps :
1) click on the "monitor shopping cart"(BBP_MON_SC) in our web browser
and search the SC by date.
2) The list of the SC created on the specific date come up.
3) when we select a SC to get into the details the system shows
a "BLANK SCREEN".
Thanks in advance.
Regards,
RK.

Hi,
First check whether you have implementedany custom BADI at the SC item level.If the BADi is wrongly implemented then you may not be able to see the item details.
Also Make sure that BASIS Team has assigned correct roles and profiles to the administrator user. Ask BASIS to use SAP provided roles and then you can try out again. (Try this role - SAP_EC_BBP_ADMINISTRATOR / SAP_BBP_STAL_ADMINISTRATOR )
Here are the related links ->
http://help.sap.com/saphelp_srm50/helpdata/en/a0/10213862f7bd47e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/9f/a47c3c989d501fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/15/46d19e4069d14e92decb87d6a56b9c/frameset.htm
Incase it does not help, then, Without assigning any other roles, try logging to the transaction - BBP_MON_SC via SAP GUI instead of webpage and then do once you get some authorization issue /error, using SU53 Transaction, you can get the required Authorization objects need to attached to the user profile.
Alternatively, For time being, Try assigning SAP_ALL and SAP_NEW to the Administrator Buyer user role of that user.
Also have a look at these notes:
Note 636270 Shopping cart monitor: Display of SC if user is deleted
Note 764135 Shopping cart monitor: Selection according to 'Created by'
Note 865179 BBP_MON_SC: Search for shopping carts shows wrong results
Note 683524 Shopping cart monitor does not display all shopping carts
Note 1045386 BBP_MON_SC: No DELETED Event after deletion
Note 829529 BBP_MON_SC: Displaying shopping cart of a locked user
901427 BBP_MON_SC: Requester instead of creator in overview list
859012 BBP_MON_SC: Deleted shopping carts are not found
882884 BBP_MON_SC: Deleting items in the status I1116
792542 Shopping cart monitor: incor. return URL from shopping cart
672764 Shopping cart monitor: Display of deleted shopping carts
Note 522620 Shopping cart monitor: Customer enhancement / BADI
Note 889942 BBP_MON_SC: Service item can't be searched by perform.period
949399 SC monitor: Search help does not display all catalogs
972697 bbp_mon_sc: No result for limit shopping cart search
901608 BBP_MON_SC: Service Item search is incorrect
813434 Shopping cart monitor and internal ITS:Shopping cart display
669720 BBP_MON_SC: Follow-on document is not found
625694 Not possible to search for SHB based on some docs in monitor
596089 SHP Monitor: problems with search functionalities
Note 561186 Monitor shopping cart: Selection of large datasets
BR,
Disha.
Pls reward points for useful answers.

Why not make one of these with plexiglass instead of real glass that is easily broken when dropped

Why not make one of these with plexiglass instead of real glass that is easily broken when dropped?

lmm10873 wrote:
Well I figure with the price we have to pay for these things they should be a little more sturdy. As high-tech as Apple is there has got to be something they could do to make them more durable. More than half the people I know have cracked screens guess they just don't bother to complain about them...What's the point anyway!
This is the problem with extrapolating personal experience to generalized statements about a product that has been sold in the many millions in dozens of countries around the world. I have several family members, many friends and most of my co-workers have been given iPhone 4's and 4s's as their work phone, and not one of those people that I know with iPhone 4/4s phones has ever had a front nor back screen break. So from my perspective, you and your friends are the extreme few, the complete opposite of your perspective.

Why not make the Detail Navigation column in SDN website?

Similar Messages

Maybe you are looking for