Why only one client ???

Why only one client is possible for one server in case of BW ?? And why it is not the case in R/3???

Hi,
have a look at sap help:
Clients in BW:
http://help.sap.com/saphelp_nw04/helpdata/en/b7/8a9a3aaf894871e10000000a114084/content.htm
Assign points if its helpful.

Similar Messages

Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

Below issue is with only one client in that untrusted domain. So boundary is not the issue.
Env -
mydom.com has SCCM PRI site (MP, DP as well).
Client is in untrusted forest.
Please help.
Thanks
MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="pri"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="staging.local"/>
    <Domain Name="staging.local"/>
    <IPAddresses>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Received header '<Msg SchemaVersion="1.1">
<ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
<SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
<SourceHost>pri1SCCM02</SourceHost>
<TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
PM 4816 (0x12D0)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
This line jumps out at me in the log file though: "An MP exists on this machine".
That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
Jason | http://blog.configmgrftw.com | @jasonsandys

Why only one public class in a source file?

why we have to write only one public class in a source file?

PhHein wrote:
Because the JLS says so.It does?
From section 7.6 of the JLS (third edition):
When packages are stored in a file system (§7.2.1), the host system may choose to enforce the restriction that it is a compile-time error if a type is not found in a file under a name composed of the type name plus an extension (such as .java or .jav) if either of the following is true:* The type is referred to by code in other compilation units of the package in which the type is declared.
* The type is declared public (and therefore is potentially accessible from code in other packages).
This restriction implies that there must be at most one such type per compilation unit. This restriction makes it easy for a compiler for the Java programming language or an implementation of the Java virtual machine to find a named class within a package; for example, the source code for a public type wet.sprocket.Toad would be found in a file Toad.java in the directory wet/sprocket, and the corresponding object code would be found in the file Toad.class in the same directory.
>
To my mind, it's strongly recommending, rather than mandating, this practice. All academic of course, merely shifting the answer from "Because the JLS says so" to "Because pretty much all Java compilers say so". I don't know of any that don't enforce this, but of course, that doesn't mean they don't exist

Why only one leading ledger?

Hi
I am aware that in new GL you can have only one leading ledger. you can have as many non leading ledgers. Only leading ledger values flows to CO.
what can be the possible reasons for the restriction of "only one leading ledger"???
thank you in advance
Regards
Vedavatee

Dear expert
    In New G/L, there is one leading ledger for each client that is valid for all company codes
    You can define only one ledger as the leading ledger u2013 SAP provides the leading ledger u201C0Lu201D
    The leading ledger is integrated with all subsidiary ledgers
    Only the values from the leading ledger are sent to CO
    The leading area in Asset Accounting (depreciation area 01) must be posted to the leading ledger
    Leading ledger uses the (additional) local currencies assigned to the company code
    Leading ledger uses the GL Total Table: FAGLFLEXT
In each company code, the settings made for the following parameters are automatically applied to the leading ledger:
    Currencies
    Fiscal Year Variant
    Posting Period Variant
Regards
Ajeesh.s

Why only one public class in one file

why does java allows only one public class in one file?
Why can not we have two or more public classes in file?
Thank u.

Note, you can have multiple inner classes.
e.g.
public class A {
    public static class B {   }
    public class C {   }
    private class D {   }
}

Distributing an App meant for only One Client

Hi Everyone
I have been struggling to find a way to solve the challenge below, any information would be of great help.
I am a wedding photographer, and I have created a Milestone App for my client. I will be creating this app for all my clients. So each app is client/family specific and has their photo galleries nicely arranged on a timeline with added interactivity.
The app can be shared by the client with their family members and friends. So there may be 10-12 downloads of the app at the most.This is a free app for the client.
What would be the best way to distribute this kind of app. Apple may not approve the app as it is one client specific. And going via itunes would required approval each time including 2 weeks of approval time. Some clients may not like the app to be publicly available on itunes. I looked at other options - Enterprise Licenses is only for within the company, but in this case the client is outside my company. There is also a VPP program which again is different.
Can anyone please suggest the best way for me to distribute my app to the client.
The app folio has been built in InDesign.
Any information would be very helpful.
Thanks in advance.
-MP

Bob
Thanks for your input.
But that would mean they have to install Adobe Content Viewer, right ? There is also an option in the Folio builder to share the folio with user via their Adobe ID.
Even after installing ACV, the user has to log in to ACV to be able to download the folio. And I noticed that a user has to first log into digitalpublishing.acrobat.com , before they can successfully log in to ACV.
I wanted to simulate the experience of an app to make it easy for the user, without them having to go through the above steps. Otherwise their parents, siblings etc. will also need to go through the same steps before they can see the content.
-MP

Why only one channel of sound in sequences? Please someone try this quest

When I add a sequence to a sequence, I have only one channel of sound but, when I open that sequence I have 2 channels of sound.
Is it a sequence setting and if it is I see:
outputs 2
downmix 0
grouping: Stereo selected
Dual mono not selected.
I swith these around a bit but get no change.
My raw footage say "2 Mono" from my Sony DSR PD-150 at 16 bit, 48 khz.
I usuall use one channel for camera sound and 2nd channel for mic.

the number of audio channels that your nested sequence will contain is the same as the number of audio outputs you have selected for that sequence ...
for example, if you create a sequence with 10 tracks of audio, but have only set the sequence to have 2 audio outputs, then when you nest that sequence the nest will have only 2 tracks of audio ... change the audio outputs to 4, or 6, or 8, or 10 etc regardless of how many tracks you actually use, and the sequence, when nested, will have the same number of audio tracks as the sequence has audio outputs
... ok, so that explains the relationship between audio outputs and the number of tracks of audio that a nested sequence contains
so why are you getting only one channel of sound when you edit it in to another sequence? my guess is that you are only patching 1 channel ... load the source sequence into the viewer (drag and drop), now check in the patch bay area at the left of the timeline window to make sure that your a1 to A1 and a2 to A2 connections are not broken ... and edit it in.
cheers
Andy

Strange problem with ORA-12154 from only one client

Hi all,
I have a strange problem.
I have three 11.2.0.1 databases on three different hosts.
For simplicity lets say:
Host1: database ovm1a
Host2: database ovm7a
Host3: database ovm8a
I have a database schema in all three databases named EHJ. In all three databases, there are fixed user
database links to the other databases. So EHJ in ovm1a has two links, one to ovm7a and one to ovm8a. The EHJ schema in ovm7a has two fixed user links to the EHJ schema in the ovm1a and ovm8a databases. And the same is true for the EHJ schema in the third database, ovm8a.
If I log into the EHJ schema for each of the three databases, I can successfully select over the database links. I've been using the SQL statement: select count(*) from user_users@dblink_name;
For each of the two links in each of the three databases, the query returns 1 so I know the database links are working properly and I have my networking setup properly.
Now, here is the weirdness.
I have an Oracle Application Server where our Oracle Forms and Reports run. The Oracle client on this install is 10.1.0.5. I've got a tnsnames.ora file setup on this Oracle App server to connect to all three databases ovm1a, ovm7a and ovm8a. I can successfully use the 10.2.0.5 client SQL*PLUS to connect to the EHJ schema in the ovms1, ovms7 and ovms8 databases.
However, (and only when) connected to the ovm1a database from this client, attempts to select over the link throw the famous error: ORA-12154: TNS:could not resolve the connect identifier specified
This error happens with both links in the ovm1a database when connected via this one client.
BUT, if I connect using the same 10.1.0.5 client to the EHJ schema in the ovm7a or ovm8a databases, the database links in those two databases are working just fine.
I'm pulling my hair out trying to figure this out.
I've tried using SQL*PLUS from my desktop machine (10g R2 client) connecting to the EHJ schema on all three databases and the db links all work fine.
Any help in trying to troubleshoot this would be greatly appreciated.
Cheers

JSebastian wrote:
I have an Oracle Application Server where our Oracle Forms and Reports run. The Oracle client on this install is 10.1.0.5. I've got a tnsnames.ora file setup on this Oracle App server to connect to all three databases ovm1a, ovm7a and ovm8a.But the client (and tnsnames.ora) in question here is actually one (each) of the three databases, right? I.e. error is thrown by the db server, acting as client (db link side).
>
However, (and only when) connected to the ovm1a database from this client, attempts to select over the link throw the famous error: ORA-12154: TNS:could not resolve the connect identifier specified Connected how, as opposed to when you "successfully select..."?
This error happens with both links in the ovm1a database when connected via this one client.Does Oracle config files on ovma1 host differ from the other two db hosts?
Does
SQL> select property_name,property_value from database_properties
2 where property_name in ('GLOBAL_DB_NAME','NLS_RDBMS_VERSION');
SQL> select owner,db_link,host from dba_db_links;return as expected on all three db's?
I've tried using SQL*PLUS from my desktop machine (10g R2 client) connecting to the EHJ schema on all three databases and the db links all work fine.Make sure you are connecting to correct databases. (Simply, three tns aliases could all be pointing to the same database.)
Edited by: orafad on May 25, 2011 11:24 PM

Why only one recent backup to restore from?

I backup up my iPhone every day. In iTunes>Preferences>Devices, why do I only see today's backup and a backup from three months ago?

Only one backup is kept by itunes(this backup is overwritten each time you sync), except for restore backups, which are not overwritten & are kept by time & date stamp. The reason you don't see any other backups listed is because you most likely have never restored your phone. If you performed a sync before you restored from backup, your backup was overwritten & that's why your info was not replaced.
If you backup your computer, you can extract your backup from that computer backup, replace the one on your computer with this & restore from that backup. DO NOT SYNC before restoring from this backup. You will be given the option to create a backup before you restore, decline.

RRAS issue - only one client can connect?

Hello, I have set up my server 2012 standard server and set it up as a DC and RRAS server, the VPN works perfectly but only one user can use it, the second user will always get error 800. there are enough IP slots in the LAN and it is correctly assigning
a new IP address to each new user that connects, but only one can connect at a time without error - I have searched around and couldnt find anything conclusive - is this a licensing or configuration issue?
Thank you very much for your time and consideration,
Larry

Hi Larry,
As far as I know, it’s not recommended to install RRAS server role on DC, since it would make the DC multi-homed.
I suggest you install RRAS server role on another server.
Here is a related blog below for you:
Multihomed DCs with DNS, RRAS, and/or PPPoE adapters
http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
If there is any RRAS/VPN related query, please refer to Network Infrastructure Servers forum below to get more efficient support:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverNIS
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Why only one voting disk showing while vote diskgroup has three disks?

Hi, experts,
OUr diskgroup OCR_VOTE did have three disks, see below:
SQL> select group_number, name, path from v$asm_disk;
GROUP_NUMBER NAME PATH
2 ASMDISK01 ORCL:ASMDISK01
2 ASMDISK02 ORCL:ASMDISK02
2 ASMDISK03 ORCL:ASMDISK03
2 ASMDISK04 ORCL:ASMDISK04
2 ASMDISK05 ORCL:ASMDISK05
2 ASMDISK06 ORCL:ASMDISK06
3 ASMDISK07 ORCL:ASMDISK07
3 ASMDISK08 ORCL:ASMDISK08
3 ASMDISK09 ORCL:ASMDISK09
1 OCR_VOTE01 ORCL:OCR_VOTE01
1 OCR_VOTE02 ORCL:OCR_VOTE02
1 OCR_VOTE03 ORCL:OCR_VOTE03
However only one votedisk exsited:
+ASM1$ crsctl query css votedisk
## STATE File Universal Id File Name Disk group
1. ONLINE 4722e13b38c14fa0bfcce2db1dcb7b84 (ORCL:OCR_VOTE01) [OCR_VOTE]
Located 1 voting disk(s).
How do I have three votedisks?
Thanks in advance.

Thank you for response.
I checked asmcmd, and under voting diskgroup, there are two folders:
Y ASMPARAMETERFILE/
Y OCRFILE/
ASMCMD> cd ASMPARAMETERFILE/
ASMPARAMETERFILE UNPROT COARSE FEB 14 2012 Y REGISTRY.253.775250583
ASMCMD> cd ocrfile
OCRFILE UNPROT COARSE NOV 28 01:00:00 Y REGISTRY.255.775250583
our DB spfile per show parameter spfile , it shows it stored at DAT diskgroup instead of vote diskgroup.
So my questions here are:
1). since spfile in database shows:
SQL> show parameter spfile
spfile string +DAT/prd/spfileprd.ora
The spfile under vote diskgroup must be for ASM instance. How do I move that? seems have to bounce asm to move it somewhere else. that will cause some disturbance to the services.
2). is that under OCR_file, the ocr file including voting disks?
Since OCR files are mirrored like this:
ocrcheck
Status of Oracle Cluster Registry is as follows :
ID : 546691893
Device/File Name : +OCR_VOTE
Device/File integrity check succeeded
Device/File Name : +FRA
Device/File integrity check succeeded
Is that means I can delete the one at vote disk and the one on FRA should still serve the purpose?
Thanks again.

Why only one backup being made?

I just noticed that there is only one backup listed in iTunes. Is it intended to only preserve the most recent?
If so, did the developers completely miss the possibility of "I didn't notice I lost that data until after the daily backup sync, now it's irretrievable"
What's the story here?

That a good idea in theory, but not know all the details of how the backup works, I would be a little relucant. For instance, iTunes knows you last backup was Tuesday @ 1730. You replace the backed up copy from Tuesday with one from Monday. Now iTunes does not see the last (and only) backup that it was aware of, but instead sees a different backup. iTunes may see this as some sort of corruption.
I strongly suspect that iTunes makes a notation in one of the iTunes library files when the last backup was made. If this information differs from the backed up files, iTunes would view the backup as being corrupt.
I would just be a little reluctant to try this, given that you may lose a lot of data and settings.
Message was edited by: GregF-ATL

Why only one backup?

Why does itunes only store one backup of my iphone? I've been playing around with backups and restores using itunes and I just can't understand why apple only keeps one backup point.
Seems dangerous if that one backup becomes corrupted.

...also, as a side note, since upgrading to 2.0.1 I did a test restore and it's still running. Started over two hours ago. Previous test restores took 15-20 minutes, I wonder why it changed it 2.0.1. I guess it's also possible my backup is in someway or somehow "bad" and its not going to error until the very end. I wont know till it finishes completely.

Logging in to shared drives - why only one user?

I am working with three different macs, all running Leopard. On two of them there are multiple user accounts. Every time I try to log in to the accounts, even though I've typed in the correct username and password, the login successfully completes but logs me in as what I'll call my "standard" login. Why is this? I'd like to be able to login as other users and access their directories.

No one else can only login as one account even though there are multiple accounts on the target machine? Any help? This is annoying. I should be able to login as any user to a remote machine as long as I have the correct id and password (which I do)...

Why only one appender works

I use jboss cluster, and I want separate server.log and cluster.log.
treat file and console appender as root.
before I add cluster appender, every thing works fine. but after I add cluster appender, only cluster.log work, server.log is empty.
are someone can help me out.
Thank you very much
source log4j.xml is in the following:
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/" debug="true">

<appender name="CLUSTER" class="org.jboss.logging.appender.RollingFileAppender">

<param name="File" value="${jboss.server.home.dir}/log/cluster.log"/>
<param name="Append" value="true"/>
<param name="MaxFileSize" value="500KB"/>
<param name="MaxBackupIndex" value="10"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d %-5p [%c] %m%n"/>
</layout>
</appender>
<appender name="FILE" class="org.jboss.logging.appender.RollingFileAppender">

<param name="File" value="${jboss.server.home.dir}/log/server.log"/>
<param name="Append" value="true"/>
<param name="MaxFileSize" value="500KB"/>
<param name="MaxBackupIndex" value="10"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d %-5p [%c] %m%n"/>
</layout>
</appender>
<appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender">

<param name="Target" value="System.out"/>
<param name="Threshold" value="ERROR"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d{ABSOLUTE} %-5p [%c{1}] %m%n"/>
</layout>
</appender>
<root>
<appender-ref ref="CONSOLE"/>
<appender-ref ref="FILE"/>
</root>

<category name="org.jboss">
<priority value="DEBUG"/>
<appender-ref ref="FILE" />
</category>
<category name="org.jgroups">
<priority value="DEBUG"/>
<appender-ref ref="FILE" />
</category>
<category name="org.apache">
<priority value="INFO"/>
</category>
<category name="org.jgroups">
<priority value="DEBUG" />
<appender-ref ref="CLUSTER"/>
</category>
<category name="org.jgroups.protocols.UDP">
<priority value="DEBUG" />
<appender-ref ref="CLUSTER"/>
</category>
<category name="org.jboss.ha">
<priority value="DEBUG" />
<appender-ref ref="CLUSTER"/>
</category>
</log4j:configuration>

Hello, you might get better answer in either J2EE forums, or in JBoss.org forums.
When cross posting, it is polite to include a link to the orginal thread (this one).

Why only one client ???

Similar Messages

Maybe you are looking for