Why Operating Unit not necessary for GL and FA ????

Hi Friends,
Can any body share the logic of operating unit, why it is attached with AR,CM,PO,AP,OM,INV..... Why not with GL/FA?
Any idea would be highly appreciatable....
Regards,
Asad

There are specific configuration (PO number, Req number, RFQ number, payables options, financials options etc), Master data (Supplier/Customer Bill/Ship to addresses) and transactions data processing (Procure to Pay processing, Order to Cash processing etc). These all work at OU level in Subledgers. However, these all are not available in GL. In FA we do not have concept of OU but we have FA book wherein we can partition that data for security, processing and reporting.

Similar Messages

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

DAQmx Error: Non-buffered hardware-timed operations are not supported for this d evice and Channel Type.

Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.

Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments

Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

Apps are tied to the Apple ID that was used to purchase them and you will always need to use that ID and password in order to update them.
Saying that you do get to update them on your new details makes no sense at all.

System.InvalidCastException: Operator ' =' is not defined for type 'Byte()' and type 'Integer'.

I'm getting the following error
System.InvalidCastException: Operator '>=' is not defined for type 'Byte()' and type 'Integer'.
at Microsoft.VisualBasic.CompilerServices.Operators.InvokeObjectUserDefinedOperator(UserDefinedOperator Op, Object[] Arguments)
at Microsoft.VisualBasic.CompilerServices.Operators.InvokeUserDefinedOperator(UserDefinedOperator Op, Object[] Arguments)
at Microsoft.VisualBasic.CompilerServices.Operators.CompareObjectGreaterEqual(Object Left, Object Right, Boolean TextCompare)
at Customer_Fee_Calculator.Form1.GetCost2(Object dimension) in C:\Users\Chris\Documents\Visual Studio 2013\Projects\Customer Fee Calculator\Customer Fee Calculator\Form1.vb:line 259
at Customer_Fee_Calculator.Form1.CustomerSelect_SelectedIndexChanged(Object sender, EventArgs e) in C:\Users\Chris\Documents\Visual Studio 2013\Projects\Customer Fee Calculator\Customer Fee Calculator\Form1.vb:line 72
Dim inotes = rs1("INOTES").Value
(Line 72) If inotes.Length > 1 Then
cost = GetCost2(rs1("INOTES").Value)(0)
desc = GetCost2(rs1("INOTES").Value)(1)
Else
PkgType = CInt(rs1("PKGTYPE").Value)
cost = GetCost(PkgType)(0)
desc = GetCost(PkgType)(1)
End If
Function GetCost2(dimension)
Dim tempSql1, rs1
Dim MyResult As New ArrayList
Select Case dimension
(line 259) Case 1 To 24
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 13"
Case 25 To 43
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 14"
Case 44 To 71
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 16"
Case 72 To 120
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 17"
Case 121 To 499
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 18"
Case 500
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 19"
Case Else
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 14"
End Select
rs1 = dbconnect(tempSql1, 1)
MyResult.Add(rs1("RETAIL1").Value)
MyResult.Add(rs1("DESCRIPTION").Value)
MyResult.Add(rs1("PRODUCTID").Value)
rs1 = Nothing
tempSql1 = Nothing
Return MyResult
End Function

Chris,
I'm not a database guy - so in many ways, I'm not really qualified to answer this, but I'll make a suggestion anyway:
At the very top of your code, put the following:
Option Strict On
Option Explicit On
Option Infer Off
With strict on and infer off, it will force you declare types - which I see missing in many places in the code.
It's entirely possible that by you then going through and fixing those issues, you'll have corrected the problem.
I don't know that, but it's possible -- and it should be done this way anyway, so there's certainly no harm to be done; in fact you'll actually speed up the program to a small degree because objects don't have to be inferred for the type that they actually
are.
***** EDIT *****
Also this: DON'T declare any of the types simply as "Object"; that's just trading off late binding for boxing, so you haven't really done much good. Declare them each as their correct actual type.
Still lost in code, just at a little higher level.

Why apple is not disable people friendly and not providing an auto answer solutions for iphones isn't it the best smartphone in the world?

why apple is not disable people friendly and not providing an auto answer solutions for iphones isn't it the best smartphone in the world?

Your question sounds more like a statement.
It's just a phone afterall...

Query Problem - Exclude operation is not supported for this characteristic

Hello all
I have a little issue with a report problem i have been given and wondered if anyone had any knowledge of this.
We have a report witn two heriarchy variables for profit centre. One is a authorisation variable and the other a custmer exit.
When we are in the report and try and drag out some profit centres or exclude some) it will not allow it and we get the following message: -
'Exclude operation is not supported for this characteristic'
Does anyone know why this is happening. I
Any ideas?

Hi Andrew,
if you have a chance confirm this with SAP Support, but I think excluding hierarchy nodes is not supported. The reason for this is the fact that it is not quite clear what should happen to the hierarchy structure when nodes are excluded. For example, what should happen to the value of the parent? Should it still contain the value of the excluded node under it?! or not?! One might want it one way, others might find the other more convenient.
Hope this helps.
Regards,
Maxim

This operation is not available for read only field 'Type MVF'

Hi All,
We are using OrderToCash PIP and we are on Siebel 8.1X.
While Synching the customer from Ebiz to Siebel facing the following issues:
Method 'WriteRecord' of business component 'Account' (integration component 'Account') for record with search specification '[Row Id] = "2d3434313239353"' returned the following error:"This operation is not available for read only field 'Type MVF'.(SBL-DAT-00402)"(SBL-EAI-04451)
Please suggest us what steps to be done in Siebel.
Thanks
Maanasa

First check the process why this is calling Account BC WriteRecord(). The field "Type MVF" might be read only and this sync process is trying to update this field which is read only. This is the reason for the error. Check the OM log / EAI Obj Manager Comp log (set log level to 5) and check.
Joseph Arul Dass

Why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?

Hi All,
Does anyone know why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
I just found this out after I installed bootcamp and Windows 7 on my Macbook 13" with P8600 2.4Ghz CPU 2GB RAM and 250G HDD after more than a year of using it.
After I installed the CPU monitoring widget on Windows 7 and CPUZ, I noticed that the lowest Freq that my Macbook operates even with <5% CPU load is only 1.5Ghz and VID @1.0V.
I installed Coolbook on OSX to confirm what I saw on Windows. I was surprised that SLFM is not visible in Coolbook which is the same result I got from Windows 7 CPU monitoring widget and CPUZ.
I checked with our local Mac support and they got the same results for all of Macbook 13" Aluminums late 2008 model. SLFM is not visible on Coolbook which means, it is not enabled.
I tried to install Coolbook on my wife's Macbook Pro 13" 2010, which has the same spec, P8600 2.4Ghz CPU and 250G HDD. The only difference is the memory which is 4GB RAM. There, SLFM is enabled and works just fine, running at 798Mhz @0.875V.
Can anyone please help confirm if this is really the case for Macbook 13" late 2008 model?
Because I checked the Intel P8600 Datasheet and SLFM should always be enabled. Otherwise, it will affect battery life as well as long term reliability of the CPU.
I would appreciate if the Macbook and Macbook Pro owners in this forum can help confirm using Coolbook the status of SLFM in your own Macbooks. You may use any other tool in checking the SLFM and share it with us if you believe it is more reliable and better than Coolbook. Thanks.
Message was edited by: jespada

BTW, Here is what I got from Coolbook for comparison. As you can see the late 2008 Macbook has no SLFM info.
Legend:
SLFM - Super Low Freq Mode
LFM - Low Freq Mode
HFM GV - High Freq Mode (Geyserville/Speedstep)
HFM - High Freq Mode
Macbook 13" Aluminum late 2008 P8600 2.4Ghz 2GB RAM 250GB HDD
Freq VID
SLFM -- --
LFM 1596Mhz 1.0000V
HFM GV2 1862Mhz 1.0500V
HFM GV1 2128Mhz 1.1000V
HFM 2394Mhz 1.1375V
Macbook Pro 13" Aluminum 2010 P8600 2.4Ghz 4GB RAM 250GB HDD
Freq VID
SLFM 798Mhz 0.8750V
LFM 1596Mhz 1.0000V
HFM GV2 1862Mhz 1.0500V
HFM GV1 2128Mhz 1.1000V
HFM 2394Mhz 1.1375V
Message was edited by: jespada
Message was edited by: jespada

Why does 'User not registered for online use' show up when I try to import a cd into itunes. None of the cd info shows up either

Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.

Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done?

The operation is not allowed for result set type FORWARD_ONLY

Hi,
I am trying to use scroll insensitive resultset in following manner-
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
ResultSet rs = stmt.executeQuery("some sql here");
rs.last();
but the rs.last() throws this exception-
com.sap.dbtech.jdbc.exceptions.SQLExceptionSapDB: The operation is not allowed for result set type FORWARD_ONLY.
     at com.sap.dbtech.jdbc.ResultSetSapDB.assertNotForwardOnly(ResultSetSapDB.java:2725)
     at com.sap.dbtech.jdbc.ResultSetSapDB.last(ResultSetSapDB.java:557)
Database version: Kernel    7.5.0    Build 019-121-082-363
Driver Version: MaxDB JDBC Driver, MySQL MaxDB, 7.6.0    Build 030-000-005-567
This used to work with 7.5 version driver. Why this is failing with 7.6 driver, any clues?
Thanks,
Vinod

Hi Vinod,
due to performance improvement when using forward only cursor we changed the default for the resultset type from TYPE_SCROLL_SENSITIVE to TYPE_FORWARD_ONLY starting with JDBC driver version 7.6. So I guess the exception comes from a statement where you didn't set the resultset type while creating it. Please check if all of the statements that you want to be scrollable have set the correct resultset type.
Regards,
Marco

Not able to create database even with a subscription. (The operation is not supported for your subscription offer type)

Hi,
I am trying to create a SQL server database, but are not able to. I get this message: The operation is not supported for your subscription offer type.
I have to azure accounts and this is only happening in one of them.
I have created a subscription, but I can see that I have 1250 NOK in credit that is expiring in 29 days.
Regards
Christian
ChristianLLoyd

Hi Christian,
The error you saw should only occur for a subscription used with a free trial offer type. Please use the below link to open a support ticket.
http://azure.microsoft.com/en-us/support/options/
You can check the following links for similar issues.
The operation is not supported for your subscription offer type
Could not submit the request to create database
DBNAME. The operation is not supported for your subscription offer type
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Why skype is not available for NOKIA ASHA 311

Why skype is not available for nokia asha 311? I had searched many sites and even in skype official site but cant download!!!! Not available even in NOKIA STORE. HOW TO DOWNLOAD SKYPE FOR NOKIA ASHA 311?
Solved!
Go to Solution.

palani6 wrote:
Why skype is not available for nokia asha 311? I had searched many sites and even in skype official site but cant download!!!! Not available even in NOKIA STORE. HOW TO DOWNLOAD SKYPE FOR NOKIA ASHA 311?
Skype has not published a native version of its messaging application for Nokia Series 40 devices. Therefore, it is not possible as of this moment.

Specified operator is not supported for 3- or higher-dimensional R-tree

hi all,
i am using oracle 10g. my data sets in 3 dimensional. i got this error and i dont know how to fix it. could you help me on this?
ORA-29902: error in executing ODCIIndexStart() routine
ORA-13243: specified operator is not supported for 3- or higher-dimensional R-tree
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 286
thanks.

Please run the following:
(you need change the order of your coordinate ranges)
drop table room;
CREATE TABLE ROOM (
ID NUMBER(6) PRIMARY KEY,
GEOMETRY MDSYS.SDO_GEOMETRY);
insert into ROOM(id, geometry) values(1,
                         MDSYS.SDO_GEOMETRY(3003, null,null,
                         MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,1),
                         MDSYS.sdo_ordinate_array(1,1,3, 2,1,3, 2,2,3, 1,2,3, 1,1,3
insert into ROOM(id, geometry) values(3,
                         MDSYS.SDO_GEOMETRY(3003, null,null,
                         MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,1),
                         MDSYS.sdo_ordinate_array(1,1,3, 2,1,3, 2,2,3, 1,1,3
-- **** create metadata****
delete from user_sdo_geom_metadata where table_name = 'ROOM';
INSERT INTO USER_SDO_GEOM_METADATA
(TABLE_NAME,
COLUMN_NAME,
DIMINFO,
SRID)
VALUES (
'ROOM',
'GEOMETRY',
MDSYS.SDO_DIM_ARRAY(
MDSYS.SDO_DIM_ELEMENT('X', -100000, 100000, 0.005),
MDSYS.SDO_DIM_ELEMENT('Y', -100000, 100000, 0.005),
MDSYS.SDO_DIM_ELEMENT('z', 50, 100, 0.005)
NULL
-- ****create index*****
drop index ROOM_IDX;
CREATE INDEX ROOM_IDX
ON ROOM(GEOMETRY)
INDEXTYPE IS MDSYS.SPATIAL_INDEX
parameters('sdo_indx_dims=3');
analyze table ROOM compute statistics;Thanks

Why Operating Unit not necessary for GL and FA ????

Similar Messages

Maybe you are looking for