Why Oracle Access Manger only works via Kerberos in IE/Mozilla?

Hi,
OAM is working only on Chrome/Safari, Why it is not working with IE/Mozilla. Why it is working only via Kerberos? Please help us in understanding this as we are very new to OAM.
Thanks,
Durga

Hi Durga,
could you be more specific? Please provide the version number of OAM and the platform.
I run OAM 10.1.4.3 and OAM 11.1.1.3 on Red Hat Linux 5. 64-bit with Firefox 3.x and IE 7 as front ends without any issues.
--olaf

Similar Messages

Nano only works via mains charger then freezes when unplugged....

Could use someones wise advice please!
My nano is just over 1yr old, worked fine until recently. I have tried the 5 r's, software is upto date, battery is fully charged, only works via mains charger but when i disconnect it, it freezes with a line through the screen. Connect it to charger, it is fine again.
Via pc usb, the apple logo comes on then it goes black then logo then black screen etc seems it almost boots up but just quite doesnt.
I have found if you hold ccentre button & left scroll button you access an engineers menu, been through all this and it seems fine. Any help would be cool

If the iPod functions normally while plugged into an external power source of some sort (either USB port on your PC or Mac OR while plugged into a wall adapter), but doesn't when running on battery power, it's likely that the iPod's battery is shot.
You can have Apple or a third party repair center replace the battery for a flat fee. Otherwise, it's time to start saving for a new iPod or replacement.
B-rock

Why Oracle 8i is not Working with JDK 1.3

Why Oracle 8i is not Working with JDK 1.3 by using JDBC.

try this
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:"somedsn","scott","tiger");
I am using this for Oracle, it is working for me.
Uma
Java Developer
http://www.globalleafs.com

Why is my airportxpr only working with Itunes and not with another music program

why is my airportxpr only working with Itunes and not with another music program??
I can not select/see other outputs in my sound selector.

You have not indicated which OS or which music program you have so I have listed a program called Airfoil to try for both Windows and Mac - it may work for you
for Windows - http://rogueamoeba.com/airfoil/windows/
for Mac - http://rogueamoeba.com/airfoil/mac/

After latest FP update, why does my website only work in Firefox.

I spent ages the other night trying to fix my website, as it suddenly stopped working in IE9. Tried all sorts of FP installs with no avail. Eventually went back to IE8, think 9 was the problem, and still my site won't work. Out of 4 browsers, IE8 (or 9), Opera, Safari and FF, only FF displays my site. If I understand correctly, FF doesn't use the same plugin as the rest. My question is, why does it only work in one browser, and not the others.
If I use my HTC Desire, the site works fine too.
Just to be clear though, this isn't just on one PC, it is on three. I have one running Win7 64-Bit, one running XP Pro, and one running Vista Business. None of them will display the site with IE8. Oh, and my WIn7 machine dual boots with XP Home, and that doesn't work either.
Even my Vista Business machine, which actually hosts the site, won't display it properly.
The site was created using SWF files built in Flash CS3, if that's relevant. One AS2 file, and 2 AS3 files on a page (usually)
You can check the site here www[DOT]digital[DASH]essence[DOT]co[DOT]uk
Sorry for the unfriendly address, I don't trust forums and website addresses.

It's the forums that make the image tiny, if you do a right-click > copy shortcut, you can then paste it into a new tab, which will let you see the full size image. It's a 3360x1050 image, maybe a bit big for the forums.
Basically though, the left image is IE, and that shows an error box. The centre image is Opera, and that shows an empty screen. The right image is FF, and that is how it should look.
If it's a machine specific error, then I can't work out why it is on several machines in my house... very odd.

Why does the sound only work for certain programs?

The sound is only working for certain programs on my iPad. Does anyone know why? Any help is appreciated.

It sounds like you have System Sounds muted. Either the switch on the side, or double tap the home button and swipe to the right, ICON will be on the far left. If the ICON is screen lock related, then it is the switch on the side.

Why does usb headset only work in one port?

I have a 2011 macbook pro 17" laptop with 3 USB ports. My headset only works in 1 of them (on the right side). Why is this? (In case it matters: I am using this headset with my computer as telephone using Google voice/chat.)

Hello kidquotes,
Thank you for using Apple Support Communities.
For more information, take a look at:
USB and FireWire Quick Assist
http://support.apple.com/kb/ht1151
Have a nice day,
Mario

HT204389 Why does talk text only work sometimes????? At times it works fine and then it will either show me the blue circles forever or just stop without converting anything I said.

Why does talking to Siri only work periodically???? Sometimes it does fine and other times it just keeps running and nothing happens! When I am tring to talk to text in messeges it does the same thing. Sometimes fine, other times the blue circles forever and then...nothing ! Does this happen to others??? Does anyone have a solution to this???

The trascription doesn't take place on your phone. The audio file is processed a little on the phone and then sent to Apple's servers for the bulk of the work, and the resulting text is sent back to your phone.
Sometimes there might be problems connecting to the internet to send the file. Sometimes there might be problems with Apple's servers in a specific region. In my case if I go outside my house a bit my phone will still be trying to connect to the wifi (there is just a little bit of a signal). There isn't enough wifi to handle sending the audio files to Apple, but enough that the phone keeps trying to use it.
Things that sometimes help. Turn off wifi if it is weak. Put your phone into airplane mode for a few seconds and then turn the radio back on.
If the problem is at Apple's end. Just wait a while.

HT1355 i need to know why my facetime will only work when im connected to wifi.

i need to know why facetime will only work when connected to wifi.

Facetime in cellular will only work on the iPhone 4S and iPhone 5, and only if the carrier supports it.

Sleep only working via Apple Menu?

Hi,
since today I have a very strange problem with my iMac: Sleep is only working through the apple menu. If I set up energy saver or press cmdshifteject, the computer won't sleep, only the display sleep will work (so the display switches off after the amount of time I set in energy saver, or if I press the keyboard shortcut the display turns off but the mac stays on)
Any ideas on this? It happens on all accounts, I already tried SMC and PRAM resets and disabled wake on lan and all sharings. I also trashed the PowerManagement.plist
It maybe helpful, that "pmset sleepnow" from terminal works fine. It seems that energy saver and the keyboard shortcut use another way to send the imac to sleep, which stopped working.
ideas?

Delete the following .plist files and restart:
-/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist-/Users/username/Library/Preferences/com.apple.systemuiserver.plist--
(username is your name or System Administrators name)
-/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
A restart is very important after deleting these plists. After a reboot your Mac will then generate new ones.
More on sleep, some of which you tried.......
This is for a Mac that won't sleep.
Here is Apple doc.#303698 with their tips.
Mine follow;
USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.
If you've set your Mac to receive faxes, it may not be able to sleep. It might also have a damaged preferences file.
If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Receive Faxes On This Computer box.
If that doesn't work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password).
If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
Some, in these forums, have had luck fixing sleep issues downloading the Combo update from this site (yours may be corrupt), not Software Update (10.6.4 Combo, etc.), disconnect all firewire + USB devices except keyboard + mouse,Repair Permissions, re-install update, Repair Permissions again + try.
You can install it right over what you have now.
Many here have reported no wake from sleep or failure to sleep, running 10.6.3 on MacBooks, using Parallels and VMware. No solution yet.
USER TIPS...
In System Preferences > Energy Saver is "Wake for network access" checked?
If so uncheck it and test.
Also, if you have an External Western Digital (WD) hard drive and have installed
WDDMService and WDSmartWareD on your Mac, it may not sleep. Fix is to un-install those....you don't need them to use the drive.
"I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
One provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB cards.
Also, here is Apple doc.#305262 about PCI cards and sleep.
After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute.
After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
One noticed this; "I have a Canon printer(shared) and my imac would not sleep. I opened up printer/fax in system prefs and noticed it said the printer was in use when it was off. Opened up the printer queue and noticed about 7 pending documents. Deleted them all and now it sleeps.
Check the printer queue!"
Good Luck!  DALE

Why would internal speakers only work for iTunes?, Why would internal speakers only work for iTunes?

Why would my internal speakers work for iTunes, but nothing else on the web?

Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen

Shutdown(block='false') only works via Admin Server, not managed servers

Hello,
We want to shut down all 10 managed servers in our domain gracefully, and in parallel. 5 of those managed servers are on the same OS/host as the AdminServer, the other 5 are on a separate OS/host (i.e. we have 5 x 2-node clusters).
I'm writing scripts to gracefully shut down all of our servers upon an OS reboot command. On the OS with the AdminServer (and 5 managed servers), I can simply do this:
connect(user, pwd, http://localhost:7001)
shutdown('myserver1', 'Server', block='false')
shutdown('myserver3', 'Server', block='false')
shutdown('myserver5', 'Server', block='false')
shutdown('myserver7', 'Server', block='false')
shutdown('myserver9', 'Server', block='false')
All 5 servers will be shutting down at the same time. If they each took 2 minutes to shut down, the whole shutdown process would take 2 minutes.
However, on the OS running the other managed servers, I cannot assume that the AdminServer [on the other OS] will be online. Hence, I would like to gracefully shut down each server locally like this:
connect(user, pwd, url='t3://localhost:8001')
shutdown(block='false')
disconnect()
connect(user, pwd, url='t3://localhost:9001')
shutdown(block='false')
disconnect()
connect(user, pwd, url='t3://localhost:10001')
shutdown(block='false')
disconnect()
connect(user, pwd, url='t3://localhost:11001')
shutdown(block='false')
disconnect()
connect(user, pwd, url='t3://localhost:12001')
shutdown(block='false')
disconnect()
NOTE that the ports are different (i.e. I connect via WLST to the managed servers themselves rather than to the AdminServer).
Unfortunately, in this scenario, the block='false' does not work. WLST waits until the managed server is shut down before proceeding to the next connect() command. So if each server took 2 minutes to shut down, the whole shutdown process now takes 10 minutes.
We don't want to use the nmKill() command on the local Node Manager because we want a graceful shutdown.
What options do we have to issue a graceful shutdown command either to a local Node Manager or to the managed servers themselves (since we can't expect the AdminServer to be online when our script runs)?
Best regards,
Michael

Hi Mike,
WLST will create it temp directory with /var/tmp/wlstTemp which is shared by all users. Since we cannot differentiated by different users which cause block on particular user at that time.
One solution is to grant write access to all users to the directory where the WLST temporary directory is created (e.g. on Solaris /var/tmp; you can verify the default on your system by executing java utils.getProperty and search for java.io.tmpdir).
If for whatever reason you cannot grant these access modes on the temporary directory, then you can create a directory somewhere on the file system where every user has the correct permissions.
Start the scripting tool with one the following options to redirect the cache files to the specified directory. Dependent on your environment one or the other will apply.
java -Djava.io.tmpdir=<path-to-tmpDir> weblogic.WLST
or
java -Dpython.cachedir=<path-to-tmpDir> weblogic.WLST
This will be useful to make shutdown of servers without any problem.
Note: block=false will always works it should not be the problem.
Regards,
Kal

Not grasping why the strcpy_s function only works once in this code

I don't understand why the below strcpy_s (BOLD, ITALASIZED) function shown below does not work. The one just above it does. I tried reading the HELP info, but just not grasping it. Can someone help in plain, simple english?? Thanks!
#include <iostream>
#include <cstring>
using namespace std;
class employee
   char name[80];                //private by default
   double wage;
public:
   void putname(char *n);    //these are public
   void getname(char *n);
   void putwage(double w);
   double getwage();
void employee::putname(char *n)
   strcpy_s(name, n);
void employee::getname(char *n)
   strcpy_s(n, name);
double employee::getwage()
   return wage;
int main()
   employee ted;
   char name[80];
   ted.putname("Ted Jones");
   ted.putwage(75000);
   ted.getname(name);
   cout << name << "makes $";
   cout << ted.getwage() << " per year.";
   return 0;

Bohica -- it is helpful to explain what "Doesn't work" means. In this case I assume you are referring to the fact that the line produces a compile error.
error C2660: 'strcpy_s' : function does not take 2 arguments
The basic strcpy_s function is defined as
errno_t strcpy_s (char *strDestination, size_t numberOfElements, const char *strSource);
Where the middle parameter is the size of the buffer that you are copying to. The middle parameter is important to ensure that you don't overwrite the end of your array (a very common bug when using C-style strings and one of the most common security
vulnerabilities out there).
Now, when using C++, there is a special super fancy templated version of strcpy_s that is willing to take two parameters, but ONLY if the function can figure out the size of the destination buffer at compile time. (The exact way it does this
will probably give you a headache based on the fact that you appear to be learning C++).
What this means, is that in employee::putname, you are copying the data to the class member name which the compiler can see has room to store 80 chars. Because the compiler can see this, it can call the two parameter version of strcpy_s.
However in employee::getname you are copying to the parameter n which is a pointer to storage for an unknown number of char's. Because the compiler cannot figure out the amount of storage you have in
n, it cannot use the two parameter version of strcpy_s.
Here is what you probably want to do:
void employee::getname(char *n, size_t sizeOfBuffer)
strcpy_s(n, sizeOfBuffer, name);

Why my iChat AV only work with Mac not PC

I've been use iChat to communicated with my parents for couple year. (I have a PowerMac G5 with external iSight. They have a PC and runnning AIM 5.9 version.) Everything works fine until recently I purchased a 15" MBP. I always got "User did not respond" whenever I try to connect with PC from the MBP. So, I did a test on Mac to Mac with my sister in-law. It works fine with her. What is worng with the new MBP? Now I always have to go back to my G5 when I need to talk with my parents. It really bothers me that my new computer isn't working. I am going to sell my G5 soon. I need the MBP work with them. Does anyone knows what can I do to make it work with PC and Mac both? (I have a Comcast Cable at home and I don't know anything about the modem..., small apartment with Airport Express. Both computer are pretty close to the Airport.)

HI Laggard,
As Rj says it will be useful to know your set up.
However we are likely to send you to this site at some stage
http://portforward.com/routers.htm
We use it for reference only in the first instance.
After you have found your device you can click on it in the list.
This choose iChat from the next page.
It will then show a page that will tell you the default IP and user ID and Password you will need to access it in a web browser.
When you get this far it can be a question of loking at all the pages.
You will certainly need to look at any Port Forwarding (Virtual Server/Pin Holes) pages and tell us if there is any setting.
Also look to see if you have UPnP as this is easier to set up.
2:10 PM Thursday; May 18, 2006

Profile in use, can't be accessed, FF only worked when I created a new profile, are bookmarks lost?

My computer crashed, when I restarted it and restarted FF (6.0.12.1739, with google, adobe and similar plugins), I got the "already running" message.
I use Windows 7.
When I learned to look for the parent lock file, not only was it not there, but my original profile folder to be empty.
So I created another profile folder, and now FF works, but I cannot access my old profile folder.
When I open the location where it should be, nothing's there. But if I go to profile manager, I see my original profile '' is'' still there (and apparently it's where it should be). I tried typing its location in Start, to no avail.
'''I tried making all folders visible,''' as some sites recommend for people who use Windows, but this did not make my old profile folder visible.
Are my bookmarks lost for good?
I have restarted the computer several times 'til now.

I forgot to mention that I can't access my old profile, because whenever I click on it, I continue to get the "already running" message. I know that I exit FF when I access profile manager.

Why Oracle Access Manger only works via Kerberos in IE/Mozilla?

Similar Messages

Maybe you are looking for