Why overdued pr is not deleted during DRP planning run in APO?
the PR information still contain external PR created in DRP planning mode and it was not deleted.
I am doubt about that the planning run in ROP planning mode cannot delete old PR before recalculating PR.
I found the root cause of this symptom and have a plan to fix them.
The root cause of it is that DRP planning run has not performed successfully.
1. Details.
For material: P174552
This material’s BOD hierarchy is
4860 (Reorder point based)
└ 6000 (Reorder point based)
└ 6080 (Period based)
For both 4860, 6000 Reorder point based planning mode, but for 6080 Period Based planning mode.
This 6080’s Period based is incorrect because this material’s ABC grade is ‘N’; it should be Reorder point based.
As you see it in below screen-shot, there is error log in DRP planning for this material.
I found that about 5% of materials has incorrect planning mode.
2. Fixing Plan:
This weekend I will recalculate all material’s planning mode again and
will Run DRP planning process chain in monthly job again.
Similar Messages
-
Why are my emails not deleting from all devices when deleted from one? I have iCloud mail set up and turned on. I have ipad2, iPhone 5 and a Mac desktop. What am I doing wrong? Thank you.
It depends on the type of email account you are using, not on iCloud. If you are using an IMAP or exchange account, when you delete from one device, it is deleted from all devices. If you are using a POP (POP3) account, it won't. (iCloud email, Gmail and Yahoo are all IMAP accounts.)
-
Why are my books not deleting?
Why are my books not deleting?
It depends on the type of email account you are using, not on iCloud. If you are using an IMAP or exchange account, when you delete from one device, it is deleted from all devices. If you are using a POP (POP3) account, it won't. (iCloud email, Gmail and Yahoo are all IMAP accounts.)
-
Why does Time machine not delete old backups
I dont understand Why time machine is not deleting old backups. As it worked first time with the same size backup drive as the drive its backing up, I assumed it would just delete the old backup as needed. Do I need a bigger backup drive?
Roglee wrote:
I just want it to delete the old backup & replace it so i just have a copy. I guess i could just re format the drive each time but that just seems a waste of my time when TM should do this for me!
If this is all you want to do, turn off Time Machine, download SuperDuper! and use it for free. This will clone whatever drive you want and the free trial will erase your back up drive each time. I can't remember if it will let you choose what to back up or if it wants the entire drive. Also, I'm not sure if the Scheduler works with the free trial. Below are some verbiage for SuperDuper!. Looks like if you want Scheduling you will have to purchase a license.
Download Now!
You can download SuperDuper! v2.7.1 right now and back up and clone your drives for free— forever!
Buy Now!
Buy now to unlock scheduling, Smart Update (which saves a lot of time), Sandboxes, scripting and more!
Time Machine will keep making back ups and when it determines it needs space, it will delete older back ups. But it doesn't delete older ones each time it backs up. -
Error occurred during CTM planning run
Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
<i> 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
<i> 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
<i> 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
<i> 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
<i> 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
<i> 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
<i> 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
<i> 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
<i> 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
<i> 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
<i> 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
<i> 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
<i> 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
<i> 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
<i> 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
<i> 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
<i> 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
<i> 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
<i> 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
<i> 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
<i> 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
<i> 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
<i> 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
<i> 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
<i> 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
<i> 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
<i> 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
<i> 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
<i> 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
<i> 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
<i> 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
<i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
<i> 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
<i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
<i> 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
<i> 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
<i> 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
<i> 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
<i> 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
<i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
<i> 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
<i> 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
<i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
<i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
<i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
<i> 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
<i> 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
<i> 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
<i> 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
<i> 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
<i> 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
<i> 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
<i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
<i> 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
<i> 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
<i> 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
<i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
<i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
<i> 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
<i> 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
<i> 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
<i> 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
<i> 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
<i> 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
<i> 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
<i> 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
<i> 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
<i> 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
<i> 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
KhadarHi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran. -
JSESSIONID not deleted during SSO logout
We have a ADF/Struts webapp on OracleAS 10.1.2.0.2 protected by SSO (mod_osso). When a user logs off from SSO, all a success mark is shown from each partner app where the user was logged in (including our application), but the remains logged in to the webapp nevertheless.
I have tracked the problem down to the JSESSIONID cookie, which causes the user to be logged in the application as long as the cookie is present. All the strictly SSO-related cookies are deleted during the logout except the JSESSIONID for the SSO partner webapp. The user is always correctly logged out from e.g. OIDDAS after logout.
After logout, if I go and destroy the cookie either by manually deleting it from my browser or by closing the web browser, mod_osso shows immediately the SSO login page. i hav also verified by tracing the HTTP traffic that it is the JSESSIONID cookie that causes this behaviour.
In Metalink article Note:258200.1, it is said that JSESSIONID cookie is not directly related to SSO so why is it a key factor when deciding whether a user actually is logged off from the application? Furthermore, the metalink article clearly states that the JSESSIONID cookie is deleted during logout (which is not the case).
As far as I remember, we have never been able to see it working in our setup.
Can mod_osso/SSO/whatever be configured do delete the JSESSIONID during the SSO log off or what would be the correct way to get the logoff working? Furthermore, shouldn't mod_osso actually ignore the JSESSIONID cookie and only care about the SSO-related cookies when deciding whether to allow the user in?
TIA,
MarkusWe solved the problem by implementing a Servlet filter that takes care of invalidating the user session if the user has logged out (either explicitly or through Global User Inactivity Timeout).
The solution follows the guidelines described in
Oracle Identity Management Application Developer's Guide section "9.4.1 Single Sign-Off and Application Logout" (http://download-uk.oracle.com/docs/cd/B14099_19/idmanage.1012/b14087/mod_osso.htm#BJFGAGIA)
IMHO, the solution is a bit overkill, but it solved the problem. We haven't yet tried the solutions proposed by Rodrigo. -
Why account assignment is not deleted when push "Order as Direct Material"?
Hi Gurus,
I have a problem with shopping carts (SC) of stock items:
1.- I add 5 items.
2.- I push "Order as Direct Material" button for 3 items only.
3.- I push "Hold" button to set SC with held status.
4.- I modify the SC and push "Order as Direct Material" button for 2 items missing.
5.- I order the SC.
One of the effects that it has the "Order as Direct Material" button is that it deletes the account assignment because the items will use to create a PO stock.
But for the last 2 items (number 4.-) the account assignment is not deleted.
This is causing that the PO's have error: "Invalid tax code".
Somebody can say to me why is not deleting the account assignment for items previously hold?
My systems are:
SRM 4.0 (SRM_SERVER 500) level 8
R/3 4.7 (SAP_APPL 470) level 24Juan Alonso Valenzuela Rodríguez wrote:
> Hi Gurus,
>
> I have a problem with shopping carts (SC) of stock items:
>
> 1.- I add 5 items. -- O.K - Assumed that you have 5 items added
> 2.- I push "Order as Direct Material" button for 3 items only.O.K.You selected as ORDER as direct only for 3 rd item
> 3.- I push "Hold" button to set SC with held status.- O.K. now HOLD the shopping cart
> 4.- I modify the SC and push "Order as Direct Material" button for 2 items missing.- Now you went to 2 nd items and ORDER as direct
> 5.- I order the SC.but this 2 nd item account data was not removed though you selected as ORDER as direct-
check item data what is stored here DP ? if account assignment not cleared it could be a bug. but you need to convince them to get a correction note.
>
> One of the effects that it has the "Order as Direct Material" button is that it deletes the account assignment because the items will use to create a PO stock.
>
> But for the last 2 items (number 4.-) the account assignment is not deleted.
>
> This is causing that the PO's have error: "Invalid tax code".
>
> Somebody can say to me why is not deleting the account assignment for items previously hold?
>
> My systems are:
> SRM 4.0 (SRM_SERVER 500) level 8
> R/3 4.7 (SAP_APPL 470) level 24 -
Scheduling Lines not deleted during Product Heuristic
Hi All
During Planning run in PPDS, Surlplus Schedule lines are not getting deleted. The Heuristic using is Planning of Standard lots in 3 horizons. Earlier these schedule line were created based on Dependant demand. Since the dependant demand is deleted, we were expecting that the surplus schedule lines gets deleted during Planning run. But it is not happening.
Please note that the surplus schedule lines are well with in the Horizons defind in the heuristic.
Interesting point here is, in RRP3 view, if we execute variable heuristic using heuristic Planning of standard lots, it is perfectly deleting Excess Schedule lines
whereas it is not with heuristics Planning of standard lots in 3 horizons
Am I missing any settings here?
Please let me know
regards
VijayHi Rohit
Thx
Let me implement and get back to you
Thank you very much again
regards
Vijay -
Can't download new 4. can not delete XUL.mfl - Program running it???
Tried to download version 4 and it said uninstall old firefox 1st but when I tried I had to delete everything under Mozilla but I could not delete the file "XUL.mfl" because it said a program was using this file. Nothing is running on this computer so i assume some spyware or something is accessing it ??? How do I find out or how can I still delete it so I can load Firefox 4?
It sounds like your programs are looking for info on the internet.. could be just looking for/checking for updates.. nothing wrong with that.
You say your on DSL, but when this happens are you connected to the network? If you are, I can't think of a reason why you would be prompted for a Bluetooth connection.
And the other posted is correct.. if you move your Ethernet/Dsl connection to the top of the list it should prompt you to do something with your DSL connection. -
Labview vi controls not appearing during Teststand Editor run time
Hi,
I'm running established sequences (TS3.5) and vi's (LV8.2) in Teststand 4.2 and Labview 2009.
During sequence execution in the Editor environment, vi's are called which display simple yes/no
user controls.
I am finding that when the Labview step is called the controls are only appearing briefly, if at all.
The execution appears to have entered Labview waiting for a control to be operated, but
the only way forward seems to be termination of the sequence.
On termination, the controls immediately appear allowing selection, but on doing so the sequence
does terminate normally.
There are 2 vi's, the 1st is called early and has only shown this problem rarely,
but the 2nd called later in the sequence always displays this problem.
Another vi which displays a progress bar, executes in a separate thread without problems.
We also notice that the additional task on the task bar does not appear as normal when
the vi's are called.
Any ideas why the controls are not displayed until sequence termination, please ?
thanks,
Gary.Make sure you are checking the "Show Front Panel" checkbox on the Module specification panel. Not having that checked is the most likely explanation.
Hope this helps,
-Doug -
Why are regional calls not in Five Cents plan, but instead are 21 cents/min.?
Why are "regional calls" not included in Five Cents/minute calling plan, but instead billed at 21 cents/minute !??!
"Local" calls are 9 cents/Call, everywhere else in the U.S. It is 5 cents/minute on the plan. So regional calls are much more expensive than calls to Hawaii!!
Also how do I find what is the "regional" area (for Manhattan, New York City), and what is the "local" area? Is there a link somewhere on the Verizon site to enable finding your own regional area versus local or long distance?Sorry you are having difficulty, an agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information to help you resolve your issue.Please remember to check your spam/junk folder if you do not hear from an agent.
-
Why does my nano shut off during pause when running?
I have 3 ipods. I have no issues with my classic nano but I purchased latest nano because of its size and easy to read buttons during a run. I use Nike plus to track all of my runs and especially need to log my runs as one. However, if I pause to take a short break during a long run (a minute to a minute and a half at the most), my ipod does not allow me to resume. After a short time I hear "your workout is complete". This is so frustrating because now I show split runs in the same day, can't record accurate information on Nike plus. I have only had it for a few weeks and have already reset it. Has anyone else had this problem.
We use nike+ also so we understand. The tracking is really nice as long as you're calibrated. It probs is a default in fitness mode to save power - we haven't had a need to pause yet. The battery must be really small compared to prev gen nanos. Our gen 4 lasts days and days before needing recharging.
The nano 6 is very pricey if you don't use the updated fitness mode and not nearly as popular as it once was. -
BTE 1830 not triggered during F110 proposal run
Hi,
I am implementing 1830 (PAYMENT PROGRAM: Edit Group) to trigger at the time of proposal run in F110. But it's not triggering at the proposal run in F110.
I have assigned 1830 custom function module to BTE 1830 FIBF > Setting > Process Modules > Of a Customer.
Let me know how to troubleshoot this issue.
Thanks,
Ron.I think you are on the right track.
I figured out the process myself.
In my case I assigned the custom FM to the BTE process 1830 like you did,
and tried to test it in a different Dev client.
But the assignment is stored in a Customizing transport which should be copied to the other Dev client by SCC1.
Long version short: did you check in your testing client if the assignment is visible in FIBF transaction?
Jeroen -
Plor not generated for components during Heuristic planning run
Hi experts,
i had run planning run PP_02 run in PPDS and i am able to see dependent requirment for componenets but my question is its not generating planned order for my components. Please let me know if i had missed any config.
Second point is i am planning to run 1. Infinit planning runa nd then finit planning run ( PP-02 and MRP_02).please suggest.
Third is when i run planning run (Product heuristic its giving me an error saying it space constrains.Please suugest me.
Thanks
RajHi,
With the heuristics SAP_MRP_002: Product planning (plan comp. immediately) , components that are defined as being planned automatically and immediately are planned using a simple lot-sizing heuristic.
SAP_PP_001 is for Changing orders manually. Better choice may be to use SAP_PP_002: Planning standard lots. We use this heuristic to create new receipt elements in order to cover product requirements
regards
Datta -
Note 1479040 - Header Condition not deleted during GOA distribution
Hi all
i do see condition at header level.
I know item wise condition for MATERIAL CONDITION
how header condition helps in the business . in what way.
MuthuGregory Mathews wrote:
Hi Gurus,
>
> I have an LIV with R block in the header level. The invoice contains a line item for planned delivery cost condition type FRB1 which was entered manually during PO creation.(no condition record exists for FRB1). But the condition type FRB1 is missing from the PO line item now and when trying to release the invoice block via MRBR, it gives the message that the 'list is incomplete'.
> The PO is not having any release strategy and the invoice number is available in the index table RBKP_BLOCKED.
>
> The condition type FRB1 got deleted from the PO on re-triggering the pricing. The business needs the pricing to be carried out on the shipment date from the vendors site. So when the vendor issues the goods, the same is updated in the pricing date field in PO line item and the pricing is re-triggered. So in this case the happenings were in the below sequence.
>
> 1. Buyer created PO with manually entered FRB1 condition type.
> 2. Invoice posted against the PO.
> 3. When vendor has shipped the goods, the ASN updates the pricing date in the PO and carries out re-pricing. The FRB1 got deleted from the PO on re-pricing as no condition record existed.
> 4. Goods receipt posted
> 5. Trying to release the invoice in MRBR, but the system gives the message that the list is incomplete.
>
> Please suggest how to go ahead with the resolution of the issue.
>
> Regards,
> Greg
Hi Greg,
Are there any a/c entries showing in GR a/c doc for this cond type? I think it could be a bug when you run the ASN Idoc. Try to un-check Delete indicator for FRB1 which would stop it getting deleted.
Regards
Shiva
Maybe you are looking for
-
Hi this thread i made earlier http://discussions.apple.com/thread.jspa?threadID=1662966&tstart=0 is now archived and i wanted to comment on it so i made this one 2. I think i may have a few years ago added a disk label and put in a dvd to burn it. is
-
The new Adobe Flash Player update don't work on my mac
The New Adobe Flash Player update doesn't work on my mac pro tower!!!! i've tried to reboot it and uninstall and restall it!!!!
-
Custom keyboard layout from standard layout
Hi, I'm trying to copy the Spanish-ISO keyboard layout in order to create a custom keyboard layout, and change somme attributes like icons, etc. I've seen that standard keyboard layouts are in: /System/Library/Keyboard\ Layouts/AppleKeyboardLayouts.b
-
Failure of starting process in Photoshop Elements 3 on MacOS 10.5.6
Hello, Up to today Ph.El.3 has been running an this computer. I experimented with gimp. And after that Ph.El 3 program ends "unexpectedly". I have deleted gimp and ph.El.3 and reinstalled ph.el.3 but nothing has changed. Can somebody help me? Thanks
-
My Adobe Application Manager won't load applications to install.
All that comes up is the loading blue squares and then a "dowload error." I think I might have accidentally ejected something on my Finder but the Creative Cloud Installer is still there under my external harddrive. Does anyone know the problem?