Why OWB Execution status report showing wrong status ?

Hi,
I created a process flow. It executed successfuly.
In that process flow I used 4 mappings. and the data is updated in 4 tables. In all the tables data updated successfully.
But the execution status is showing that , in one table the records inserted are 0.
I verified in the Runtime Assistant. There it shows correctly.
Why it is showing like that?
Any suggestions are welcome.
Thanks and regards
Gowtham Sen.

I've seen this often here. Check the log files on the OWB server and you may see that control center service was force restarted. I have an SR opened with Oracle on this.
The symptoms I've seen are:
1. The mapping reports success
2. Some or all of the levels of the mapping show "*" for the statistics
3. The mapping completion time shows the mapping start time.

Similar Messages

PCR "Status overview" showing wrong status

Hi,
We are implemeting Personnel Change Requests using Adobe forms. Our approval processes are working fine. But the status overview link in the "Personnel Change Request" tab shows wrong data. It shows the status as "Open/For Approval" for all PCR's submitted irrespective of the actual status. When i check in Started workflows from Txn:SBWP in R/3 i find that a few of these workflows have actually completed.
Is there any configuration that is to be done to display the correct status? Any inputs on this would be of great help.
Thanks,
Prasath N

Hi Raja,
Thanks a lot for your inputs. Finally i found the issue. I have not set the system status using the task TS50000049 and hence the system the notification remained in "Approval required" status. I was under the impression that this status is set automatically once the approval is completed. Initially when i started the development i had assumed that this task was also used to help in updating the data along with TS50000058. Since we are updating the data in background using certain function modules and BDC's i had removed this step in my custom WF.
I have solved the issue now but still there are some of the questions as given below. Please clarify these if you have any idea on this.
1. There are some hardcoded values like QN44, QN55, PMM4 that are passed to the business transaction. What are these values?
2. How is the system deciding the statuses on these values? Is there a place or table where these business transactions are linked to the Approval texts? 
3. I searched through table TJ01T and found list of business transactions for Notification but i just get an error (in WF log) if i try to use them!!!
Thanks,
Prasath N

Recovery Point Status Report Shows Only One Day

Hello. Our Recovery Point Status Report showed us the last five days until about a month ago and now it only shows us one day. Just happened over a week-end when there was nothing changed on the server. We appear to have recovery points that go back
a week and the recovery point status is set to a month. We are running System Center 2012 R2 DPM.
Any help is appreciated, thank you for your time.
g

Hi,
Check your status report granularity settings for each protection group and make sure it's set for 1 day instead of weekly.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

VM2.2 manager page shows wrong status "Shutting down" for VM Guest

Hi,
VM manager page shows wrong status "Shutting down" for VM guest, I can very much connect to console and see it is up and running.
It happened when trying to shutdown VM guest manually but in parallel VM server got rebooted automatically.
Any information on How to correct the status in VM manager page?
Thank you.

I found below this solution on http://download.oracle.com/docs/cd/E15458_01/doc.22/e15441/appendix_e.htm#BHBCIAJB
To solve this problem, change the status manually as follows:
1.Make sure that the virtual machine in the target server has been shut down. Use xm list or virsh list to check the virtual machine name and ID.
2.If the virtual machine is running, use xm shutdown vm_id or virsh shutdown vm_id to shut it down, where vm_id refers to the virtual machine name or ID.
3.Use xm list or virsh list to check if the virtual machine has been shut down. If it is still running, use xm destroy vm_id, or virsh destroy vm_id to shut it down.
4.Log in as oracle (or root first, then su - oracle) to the computer where Oracle VM Manager is installed, and run the following commands to change the virtual machine status to Powered off in the Oracle XE database:
export ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server'
export ORACLE_SID=XE
$ORACLE_HOME/bin/sqlplus / as sysdba
SQL> update ovs.ovs_vm_img t set t.status='Powered Off' where t.img_name like 'vm_name';
SQL> commit;
SQL> quit
vm_name refers to the virtual machine name.
5.Retry your operation, or delete the virtual machine directly.

"Invoice History Report "show wrong balance for supplier invoice with USD

Invoice History Report show wrong balance for supplier invoice with USD Currency
After I run this report i see in the last of this report there is difference between the supplier total
USD (Currency ) and the open Balance USD , it is decreased the open balance
for supplier with 2300 USD with out any reasons
bellow is some data copy of the report
======================================================
Supplier Site Total: SAR 34,700.00
Supplier Site Total: USD 39,000.00
Supplier Total: SAR 34,700.00
Supplier Total: USD 39,000.00
Open Balance: SAR 34,700.00
Open Balance: USD 36,700.00
*** End of Report ***
==============================================
please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
or it is bug in this report , becuase i compare this report with other report in account payable like
-supplier open balance letter
-invoice register report
-invoice aging report
all this report give me the amount for supplier USD =39000
BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
thanks

Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
Thanks

VA05 - Status is showing wrongly- instead of 'C" it is showing as "A"

Dear All,
This is regarding with VA05 List of Sales Orders:
In this report we have one field   "Status" where we got options such as
A = Not yet processed
B = Partially Processed
c = Completly Processed.
We got number of Sales Orders completed Invoiced
When we run VA05, all these Sales Orders Status must show as "C" as the Orders are completly processed but the status is showing as "A" thought the Orders are processed completly.
Can anyone suggest me the reason?
Best regards
Amjath

Dear,
         This is for coming that your sales order not deliver to billing.
        Please check there is any item pending for delivery in sales order.
Regards,
Sandip

Em showing wrong status

Hi,
RDBMS : 10.2
OS : Centos 5
I can successfully start and stop emctl service. emctl start/stop dbconsole is showing no error. But when I hit the em URL , it is showing db and listener status as down. But they are working :(
can you please tell how to correct this behavior ?

database is working perfectly. No error generated.
If on EM page, I may process to startup, it takes all the credentials and on next screen detect oracle database as up and running. When I click return, it takes me to the same screen showing everything status down.

Jsp shows wrong status in the browser

Hi,
 I am facing a problem in JSP. I am working on Weblogic 5.1 JSP's. The problem I am facing is that even after loading the whole jsp in the browser, the status bar on the browser still indicates that it is lookgin for something, It is not showing DONE status. User's of this page r getting misguided.
 please help me
 ram


Can you provide more information? Are you using the latest Service Pack? Do
 you use a proxy in front of WebLogic?
 Please be more detailed.
 Regards,
 Eric
 Which version of WebLogic?
 "Ram Perumalla" <[email protected]> wrote in message
 news:3bb87530$[email protected]..
 > Hi,
 > I am facing a problem in JSP. I am working on Weblogic 5.1 JSP's. The
 problem I am facing is that even after loading the whole jsp in the browser,
 the status bar on the browser still indicates that it is lookgin for
 something, It is not showing DONE status. User's of this page r getting
 misguided.
 >
 > please help me
 > ram

Report showing wrong data

Hi Gurus,
When we are generating report in the answers in one column it is showing wrong data from where i have to start for this issue.
Thanks,
Rafi

Pull that column alone,run report, compare the results with your manual query, and also compare the physical query.
if all are good then try to add other column from any other dim and then do the same as above
repeat till you know the cause.
Pls mark if helps

Snapshot report showing wrong instance on grid control!!!

Hi
On one of the cluster environments, Even though I run snapshot report on instance 2, report shows instance 1. This i happening on one set of cluster environment. Other cluster instances are working fine.
Let me know if you have seen such behavior and fix...
Thanks,

It does not matter how many instances you have running in a RAC cluster ... you have one and only one database.
Define your use of the term "snapshot." We have no idea to what you are referring.

Why does my iPad store show wrong id

In my settings, it shows the right Id. When I go into store to get items or updates, it shows wrong id. How do I fix this?

If you purchased apps with a different Apple ID, you will always have to use that ID in order to update the apps.
If that's not what is happening to you, I don't know what the device would be showing an ID that does not belong to you, unless somebody else used their ID on your iPad. Try swiping to the bottom of the app store featured tab and tap on the Apple ID that is showing in there. Sign out of that ID and sign into yours.

Showing wrong status in sales order

Hi Friends,
I have an issue with thrid party sales order processing
Step#1
My client runs the sales order for
      Material                     Qty
p-100                   10
p-101                10
p-102               10
step-2
Purchase requisition created and from vendor delivery happened
Step-3
My user created billing with reference of sales order for below material
Material          quantity
p-100          20
p-101                  10
p-102          20
step-4
user found mistake and he cancelled the invoice and created new billing document
for
material                     quantity
p-100                       10
p-102          10
again he found mistake and cancelled this billing document and create one more billing document with reference of sales order
material     quantity
p-100     10
p-101   10
p-102     10
now the issue is for p-100 and p-101 it showing being process and p-101 it showing status as completed
please suggest me

Hi,
Check the code written in the user exit if anythingis going wrong there.
First pull the data till PSA and try to check if correct data is coming till PSA.If that is the case try to debug the update from PSA to target and check the values of the field where xactly it is getting changed.
Do u have any transformation in the BI side?
Please feel free to get back...
Regards,
Abhsihek

PO showing wrong status

Hi : I have setup approval for PO. I have one PO in the worklist, it shows PO awaiting approval and whenni go and check detials in PO for the Approval view on the Header Data tab, it says No Approval Required. which is correct as per our setting. could you please tell me why I am getting different statuses and help me in resloving it.
Thanks
RK

Hi RK,
Please read this link.
Re: PO Status is Awaiting Approval when no Approval Required
thanks,
Raju

Adding new Updates makes Reports show compliance status as "Enforcement state unknown". Old updates are still installing though.

Hi, Just wondering if anyone has seen this before and resolved it?
Basically, 2012 Software Updates have been working fine for over a year. Last months Patch Tuesday updates were fine too.
However, this week I added a new update to a Software Update Group/deployment. This update did not deploy, and when I run a report, I get "Enforcement state unknown" for ALL clients in the collection. This happens to any deployment I amend. And
also if I create a new update group and new deployment - same thing - "enforcement status unknown".
However, updates previous to this week continue to download and install fine for all deployments. Deployments which I have not changed appear to continue to report correctly (unknown, compliant, pending system restart, etc).
In the SCCM console for Software Updates, the "required" and "installed" figures are still showing correctly.
Custom software packages continue to download and install too.
All servers have sufficient disk space. Most collections dont have maintenance windows, and the deadlines are correct.
Not sure what this could be, a problem with the Management Point? But I can see any errors in the "monitoring" view on the server. The client log files like "wuahandler.log" and "windowsUpdate.log" appear fine also, no obvious
errors.
I cant see any evidence of a group policy conflict. The WSUS entry is still correct in the local group policy (GPEDIT.MSC/admin template/windows comp/ windows update).
Any ideas here? Thanks

There were absolutely no errors in WUAhandler.log on existing machines - all looked normal, which baffled me. Machines with newly installed SCCM client only had machine and user policy update, so could not check for Software Updates.
However, I through web searches, I found a solution on another discussion here:
https://social.technet.microsoft.com/Forums/en-US/1cefa9e0-a7f9-48d1-83b9-34d2293bab64/sccm-2012-r2-problem-with-device-deployment-user-deployments-ok?forum=configmanagerapps
Basically the issue was described as a "corrupt PADBID in the database". A SQL query code detects if the issue is present, and another SQL code fixes the issue.
What lead me to this fix was searching for this error in "CCMEXEC.LOG" online: "System task 'PolicyEvaluator_Unlock' returned error code 0x8000ffff".

Finder status bar showing wrong available drive space

The status bar in finder windows is saying that I have more space availible than I actually do. This problem is not occuring on external drives. Everything from quick look to third party system monitoring apps all show the correct space availible, and the only thing that says otherwise is this finder status bar.

Having the same problem here - MacBook Pro (one week old) 10.8.2. Started up from the "repair disk" and ran disk utility - both repair and fix permissions. No correction.

Why OWB Execution status report showing wrong status ?

Similar Messages

Maybe you are looking for