Why page on the internet doesn't work????????

Hi guys
I have this domain http://www.regardit.eu forwarded to my .mac account. It is about photography from Luembourg.
Anyway. I have problems to visit the site. It is forwarded corectly. ISP helped me, but still people can not visit this site. any idea why?
Today I just updated the site and from my computer it works, but from other machines it doesn't
Can you confirm if you can see the page?

Hey! I know that really ***** with the website. People also complain that it is way slow.
I guess the problem could be that your ISP doesn't allow Cname to look up DNS A type.
You can try this.
It works on my site for now, but I need some time and feedback from people.
Solution:
Go to your domain setup and click Change DNS.
you should have there one or two entries.
change it like this
Let say my domain is regardit.eu
1 name TTL -1800 type A Value 17.250.248.34 -> this is IP web.mac.com
2 name TTL -1800 type CNAME Value regardit.eu
I'm not a PRO, but for now it works. Apple even ISP did not know where the problem is.
Let me know if it worked for you./
MIKE

Similar Messages

Ipad2 has wifi connection but the internet doesn't work

I use my ipad2 at home with the wifi. I have nothing changed but now the internet doesn't work. The ipad shows me the wifi connection but i cannot receive email and the safari doesen't work too.

This Apple doc may help:
iOS: Troubleshooting Wi-Fi networks and connections
...Found via this page:
http://www.apple.com/support/ipad/

My iPod 5th gen connects to wifi but the internet doesn't work.

So we were watching netflix on the ps4 and something happened and now my ipod will connect to the wifi but the internet doesn't work. everything else connects just fine to the internet just not my ipod. I've renew my lease, reset my settings and network, forgot my network and rejoined, turn my ipod completely off and back on, turned my wifi off then back open. The IP address is 192.xxx.x.xx
its the ipod 5th generation 16gb. With the latest update

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My MacBook isn't connecting to the Internet. When I try to connect, it shows the signal strength in the top right corner as if it was connected, but the Internet doesn't work. When I go to my network preferences, it says the ip is self-assigned.

My MacBook won't connect to the Internet, but it's connected to my router. When I go to network preferences, it says that it has a self assigned ip address, and can't connect to the Internet. How can I fix this? Please help!

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

My 3g internet doesn't work anywhere. I can get internet with wifi, but when I turn that off, the internet doesn't work at all. Any ideas?

I've already tried resetting the phone. Nothing seems to work. Occasionally the internet works fine, but most times, it doesn't work at all.

Contact your carrier to ensure data access with your carrier's cellular network is provisioned properly with your line/number/account.

Why in spanish the keyboard doesn´t work Q or A letter

That side doesn´t work sometimes in games, anybody that the same problem?

I get erratic loss of input capability into my Touch. On some days in the browser ,the W key doesn't work but the adjacent Q or E keys work just fine when I slide my finger back and forth. A few hours later, it works just fine. Last night I was entering a new location in the weather, the keyboard worked fine but after a search, it would not let me click on the new location to set it up. I could get a blue background but it would not click to complete the entry. Again, I tried it 20 min later and it worked just fine. Same thing on iTunes, there are occasions when the screen is unresponsive to my input and other times when it works just fine. I have one of those plastic covers sold at the Apple store to protect the screen and maybe that's the problem. However, recent rollerblade fall proved the worth of the protector as the cover was deeply scored but the screen was fine (was erratic before fall, not caused by fall). Touch is not jailbroken. Don't want to give up the protection film but I'm not sure whether there is a problem with my iTouch or just with my touch.

I updatet my iPhone 4 to ios 6.1 and now the internet doesn´t work..

what can I do?
Please help me :-)
Thank you
Julia

Please explain in detail the issue you are experiencing
Try this > http://support.apple.com/kb/ts1559
Don't thank me yet.
Mal

TS3196 i have installed windows 7 on my macbook pro with retina display but the internet won't work in Windows, please help!!

I have the latest 13" Macbook Pro with Retina Display. I just recently installed Windows 7 through Bootcamp assistant but when I am in Windows the internet doesn't work. How can I fix this??

I found where to download it in bootcamp, I just can't find my usb drive I will need to buy a new one and then give it a shot. I am sure I will be back to ask more questions... thanks for your help.

Why won't the internet work on my iPod?

On my iPod touch 4G, the internet has stopped working. Not just safari, but everything that requires an internet connection. I get the standard little message 'Safari cannot open the page because it is not connected to the internet.' Sure, I can open them but they won't work without the internet. It happened a few days ago and I'm completely stumped. I've rebooted, updated, rejoined my internet, reset my internet, reset my network settings, everything I can think of and whatever someone has told me. I've deleted recent apps, just in case they were intefering with the connection, but that doesn't do anything. This has happened once before, where a simple rooter reboot solved it and there was no more of it. However, nothing seems to be working this time. Any advice? My operating system is actually 4. 3. 5, but there's no option for this. I don't have a router or DNS code, but then again I'm not sure I ever did. There's also no URL in the HTTP proxy box. Is this a problem?

Is it this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
If you place the iPod next to the router does it see the network? If so that indicated a loose internal antenna
http://www.ifixit.com/Guide/iPod+Touch+4th+Generation+Wi-Fi+Antenna+Replacement/ 3640
Last try:
Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Files deleted from the Library and now internet doesn't work?

Hello,
I'm new here and this is probably going to sound dumb but... my father deleted some files from the Library by mistake and now internet doesn't work in his computer. Everything seems normal, but the webpages don't load (we tried lots of pages and 3 browsers). If you try to update any software it can't connect to the internet either.
He reinstalled the system (it's Mountain Lion, I think) but it didn't worked (it was a partial reinstallation, without losing the data). He also tried restarting and pressing CMD-R but nothing happened.
Any ideas on how to solve this problem? Thank you so much in advance! (and sorry for any typos, English is not my native language)

Hello Eleone, & a warm Welcome!
So what exactly isn't working or any messages you get?
Does Mail still work?
Might try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

Count(*) in the loop doesn't work and I really don't know why...

Hello,
I can't figure out why the following doesn't work. I cannot debug for I do not have privileges on this server.
The execution always fails on bolded line. If I substitute the variable with the table name itself it works. The variable is properly populated in each of the iterations as I can see it by using dbms_output package. The small but may be important detail may be I am connected as user A but the tables are in the schema B. However I can list the tables and their columns in all_tab_cols view and there are synonyms made in my schema which allow me to access the B tables without prefixing them.
I get the error:
Error report:
ORA-00900: invalid SQL statement
ORA-06512: at line 26
00900. 00000 - "invalid SQL statement"
*Cause:
*Action:
I ran out of ideas and I do not have access to any of the Oracle instance to be able to debug right now.
Variable type for v_tables is wrong? I do not have some magic privilege to use execute immediate with variable?
Oracle server has a bad day today?
The crap is 11.1.0.7 if it has anything to do with my problem.
Please help if you can.
Grzegorz
declare
v_number number := 646989;
v_current_table nvarchar2(50);
v_itemno number;
type t is table of nvarchar2(50);
v_tables t;
begin
dbms_output.put_line('Working...');
select table_name bulk collect into v_tables from all_tab_cols where column_name = 'ITEMNO' order by table_name;
for i in 1 .. v_tables.count loop
dbms_output.put_line('Number: ' || i);
v_current_table := v_tables(i);
<b>execute immediate 'select count(*) from ' || v_current_table || ' where itemno = :a' into v_itemno using v_number;</b>
if (v_itemno > 0) then
dbms_output.put_line('Current table contains specific ITEMNO: ' || v_current_table);
end if;
end loop;
end;

In SQL Plus run this and see what SQL is your code returning. Then execute the SQL individually.
set serveroutput on
declare
     v_number number := 646989;
     v_current_table nvarchar2(50);
     v_itemno number;
     type t is table of nvarchar2(50);
     v_tables t;
     lSqlString varchar2(20000);
begin
     select table_name
       bulk collect into v_tables
       from all_tab_cols
      where column_name = 'ITEMNO'
      order by table_name;
     for i in 1 .. v_tables.count loop
          v_current_table := v_tables(i);
          lSqlString := 'select count(*) from ' || v_current_table || ' where itemno = :a';
          dbms_output.put_line(lSqlString);
          --execute immediate lSqlString into v_itemno using v_number;
     end loop;
end;

Why the preloader doesn't work in IE 8 but works in FireFox?

Why the preloader doesn't work in IE 8 but works in FireFox?
Please see the attached files. Thanks in advance.

Why doesn't the preloader work in IE8?
What's "virtual sandbox"?

Why the wifi doesn't work after the upgrade to iOS 5?

The problem is that after the upgrade to iOS 5 the wifi doesn't work. I mean, iPad is connected to the wifi but not to the internet and also the connection on the other device doesn't work. So I had to turn off the router and then turn it on.

Try a hard reset first to see if that does any good. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If no luck with that, you'll need to manually connect your iPod to your iTUnes library in recovery mode using the instructions in the Apple support document below. Doing so will allow you to bypass the passcode and restore the iPod.
iOS: Unable to update or restore
B-rock

Why the imsg doesn't work without a sim card with iOS 7???

Why the imsg doesn't work without a sim card with iOS 7???

If it worked for you using iOS 6, then it appears iOS 7 has made some changes. Was it working before?

Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

Hi, KK93.
Sometimes a simple power cycle of the router and Mac can resolve the issue. However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
Troubleshooting Wi-Fi issues in OS X
http://support.apple.com/kb/HT4628
Also, see the article below to make sure the router setting have been optimized for performance.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Cheers,
Jason

Why page on the internet doesn't work????????

Similar Messages

Maybe you are looking for