Why partner function description cannot see in the billing item?

Hi Experts,
I have one doubt about partner function.
I have created a new partner function with description and assign this partner function to the billing partner function procedure.
When I create the billing document, in the item level, I can only see the partner function name, but description is missing.
What is the reason?
Does any one meet such kind of situation before?
Hope to give me some suggestion.
Thanks in advance.
Best regards,
Chris Gu

Hi Chris Gu;
In the SD module personal numbers addresses are determined to be
the address of the personal area.
If the personal number is assigned to a sales office or sales
organisation the system shows the address of the sales office and
if there is no sales office the address of the sales organisation.
If you have no sales office or sales organisation assigned and is
not assigned to a personal area, the system does not determine an
address.
Please maintain the assignment and the address should be displayed.
If you want the private address of the personal number to be displayed
you can use modification note 63258. Please consider that
this may conflict with data security.
Regards
Ruy Castro

Similar Messages

Need to determine which partner function level is pulling in the currency (

need to determine which partner function level is pulling in the currency (sold to, ship to , bill to or payer)on sales invoices
Also I my requirement is to have different currency based on different ship to party for same sold to..then how set up the same

Hi,
Yes, that is true. The field borders are not drawn when there is no data for that field.
Here's a workaround though. Create this formula and use this formula field instead of the original database field on the report
if isnull({database_field}) or not({database_field} > 0) or not({database_field} = "") then
space(1) else totext({database_field})
You can then apply borders on this field and you'll see that the field draws the border when there is no value.
If the field that is in the Subreport, then it needs to be done in the Subreport, otherwise in the Main Report.
-Abhilash

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos?

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos? I have all ready download Adobe Flash Player and installed it but it has not effect.

Get Flip4Mac (for Windows Media videos):
http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
And Perian for everything else:
http://perian.org/
You should be able to play most videos with QuickTime player once both are installed.

HT3529 When texting from my iphone 5, I was able to see when the text was delivered and when it was read. An Apple Genius reset my iphone, and now I cannot see when the text was delivered or read. Any suggestions?

When sending a text, I was able to see when the text was delivered and when it was read, then an Apple Genius reset my phone and now I cannot see when the text was delivered or read.
Any suggestions?

Look in settings - message.

TS3274 Somehow the information on my iPad is too large and i cannot see all the icons at once. How do I go back to the normal size? all the icons. How can I resize the infor on scren?

Somehow the information on my iPad is too large and i cannot see all the icons at once. How do I go back to the normal size?

Have you tried resetting your device? http://support.apple.com/kb/ht1430

Free form partner function field in Sales document header and item..

Hello Experts,
Is there anyway we can use the partner functions functionality in Sales document header and item level, so that we can enter a free form number in the Partner field? I mean is it possible to be able to enter a free form number WITHOUT getting validated against corresponding master data like Customer or Vendor master, Contact person, Personnel or User master records?

Hi,
It is not possible.
Because partner function will be determined in the sales document header and item as per the configuration you have done in the partner determination.
It is not possible to enter a number wihich is not created and assigned.
Regards,
Mullairaja

Why isnt there a none option for the billing options ?

Why isnt there a none option for the billing options ?
It use to be there...
Please solve this problem as i only download free apps...

There should such an option only if you try purchasing a free app within your iTunes on your computer.

Why are sent emails not stored in the Sent Items folder in iOS7

Why are sent emails not stored in the Sent Items folder?

Thanks, Matt.
I'm now starting to notice the emails that don't come in order are all posted from sites that use multiple platforms to send the same message; email, Facebook, Twitter, etc. so maybe that has something to do with it. I'm thinking the hold up is possibly at their end.

How do the billing item conditions hit accounting?

Hello,
I am picking up the billing item condition values from KWERT and the corresponding GL Account SAKN1 from the KONV tabke. KWERT gets stored with the sign. I need to know how this condition amount will hit accounting. Would it be a debit or a credit entry on the accounting side. How can I do this? I cannot use the debit/credit indicator BSEG-SHKZG as we have a summarization on the material and we are trying to re-determine in a custom code what amounts should have posted to BSEG by material. While I am getting the amounts correctly from KONV, I am not able to figure out how these amounts should be treated on the accoutning side - as a debit or a credit?
Example, on a regular invoice if the value is positive for a G/L account, on the accounting side the value is reverse in sign. However, this cannot be generalized as we can have many different types of invoices and different combinations.
Thanks,
Prayarna

Hi ,
if u are unable to use BSEG for credit or debit , then what u can do is , ask ur Functional ppl abt the condition types , which one will have -ve values in the pricing procedure..
i think is the only way to do in this case , finding which condition type is -ve.
regards
PP.

3 questions: 1) I am unable on my Mac Book Pro to enable iCloud Photo sharing in iPhoto preferences, why not? I cannot see my iCloud drive contents.Why not?

Having a Macbook Pro i have taken and loaded in 569 photos from my cameras and want to share using iCloud. But I simply cannot get iPhoto to enable iCloud photo sharing. What could be the cause? what should I try other than the instructions which I followed three times already as outlined in the FAQ section of the help function?

OT
Thanks for the suggestion . As soon as they hand me my laptop at the store in 45 minutes time I shall try the disable and then re boot as you suggest.
so far they sent me this; Disk has no problem.They may have more to say to me re the flash drive and results of storage diagnostics and ASDs ( what is this? ) when I see them .
The case repair is redundant to the problem I am having but if they give me a new one worth $399 i will not complain,eh.
Problem Description/Diagnosis
Issue: MacBook Pro is running extremely slow. Specifically IPhoto
Steps to Reproduce: Attempted to repair disk, no issues found.
Cosmetic Condition: Scratches to enclosure and clamshell.
Proposed Resolution: Tighten MagSafe board. Run storage diagnostics and ASDs if no trouble found with flash drive.
Estimated Turn Around Time: We'll call you in 3 - 5 days
Mac OS Version: 10.10.x
Hard Drive Size: 251 GB
Memory Size: 8 GB
iLife Version: Unknown
Employee 1178255246
Repair Estimate
Item Number
Description
Price
Amount Due
Customer KBB
661-8154
Housing, Top Case with Battery
$ 399.00
$ 0.00
S1490LL/A
Hardware Repair Labor
$ 39.00
$ 0.00
Tax
$ 0.00
Total
$ 438.00
$ 0.00

IVI_GetAttribute function panel: cannot see instr.spec. attribute

Hi,
I recall the function panel for a Ivi_GetAttribute function,
f.e. Ivi_GetAttributeViString. To select an attribute for the 'Attribute ID' a window pops up: 'Select Attribute Constant'.
In that window I cannot see attributes that are specific to the particular instrument (the ones that begin with PREFIX_ATTR_). However in the Control Help for 'Attribute ID' it says that also instrument specific attributes can be selected here.
I checked my .c and .h file and everything is ok and in order for my instrument specific attributes.
Am I doing something wrong or is it simply not possible to select instrument specific attributes
in function panels for the Ivi_GetAttribute functions?
If so, does that mean I need to manually type in the name of the instrument specific attribute in the source code?
Thanks for any help/hints,
best regards,
Marcus

From your post, I'm not sure I know if you're writing an instrument driver, or trying to use one to write a test application. If you are writing a test application, you should not be using the Ivi_SetAttribute and Ivi_GetAttribute functions. You should be using the Set- and GetAttribute functions that are part of the instrument driver you're using - in this case, norma5xx_SetAttribute<type> and norma5xx_GetAttribute<type>. These functions should be in the driver's function panel, and should include all of the driver specific attributes.
The functions defined in the ivi.lfp function panel are primarily meant to be used when writing an instrument driver. That function panel and associated sub file define all of the general attributes which all drivers are expected to support. However, there's no way for that function panel to know about the attributes that are specific to your particular driver. They will only show the inherent attributes, because that is all they know about. You can use those functions with other attribtute IDs when writing a driver, at which point you would have to enter the IDs yourself. If you want to still use the function panels to inject the function calls into your code, but need to use an identifier not in the supported list, you can press Ctrl-T to turn all of the ring, slide, and boolean controls on the function panel into text boxes where you can enter whatever identifiers you wish.

I cannot see all the data in target disk mode

I have an issue where my MacBook pro is not booting into the Yosemite. I see the progress bar hangs at about 45% on the startup screen. I called Apple support and they asked to use the target disk mode to connect to my mac and then copy data like that. I am using the same technique but I am not seeing all the data under users. My data under the folder users had another users data that I cannot see.
How can I see my data for all the other users? Help please!!!

Could be that the the data or directors on the HD are corrupted.
- Copy all data you can
- Try cloning the whole disk to another disk before you attempt recovery methods.
- Try repairing the HD via Disk Utility
- Try a data recovery program
http://data-recovery-software-review.toptenreviews.com/mac-recovery-software/

I cannot see who the sender is of emails

while working on my email, I hit something and now have cannot view who the sender of the email is

Are you saying that you are missing the FROM column in the Inbox view? If so there is a small icon at the far right end of the header that you click to select what columns to display.
If you have dragged the FROM column to the left and hid it and now only see 3 dots where that column should be, hover your mouse up where the divider for the FROM and SUBJECT columns are and when you see a double headed arrow appears click and drag to the right to reveal the column.

Adding a new partner function in va01 has to differ in item wise

Hi all
here by adding a new partner function by item level in va01
i hav a z partner table , that has some values , each values differ from item level
for eg : item 1 (posnr) 10 , has a new partner called buyers1
posnr 20 has buyers 2
what i am facing probs is , i cannot append into table xvbpa (using a program mv45afzz) & form save_docu_prepare.
xvbpa table item is not storing
partne rwill come default from the customization , but my partner will be add depends on item / material .
i have tested a scenario for eg . when i creating a orders , as soon as entered a dealer , the default parner will be setting , then i entered manually a new partner , then it is reflecting in a table with item
customization partner doesn't hve a item , where as while creating when i put manually it is reflecting in item level .
and 1 more things , when i try to append it also , its is reflecting to all item in orders
tel me how to refresh the new partner item wise , that also O.K

nO ANSWER FOR THE QUES. NEED TO RAISE MORE QUES. SO ONLY I AM CLOSING

Cannot See ITC Zapf Dingbat Item

I am converting all of my files from CS2 - CS3.3 MAC to PC CS3.3. I have a dingbat that I used to be able to see. But now every file I open for the first time in CS3.3 PC, I cannot see my dingbat. I have to type it in AGAIN to see the item.
I have tried bring to front, send the others to back, changing the color. I am able to retype in the letter that makes it the Star that I need, but I have to do that on ALL my artwork. But mainly it icks me off that it is doing this when it obviously recognizes the item as a ITC Zapf Dingbat, and since I have that font installed on my computer.
Attached is the Dingbat, not visible, but you can see that Illustrator recognizes it.

It is an Open Type.
And to try and prevent issues, I converted all of my MAC fonts to PC compatible fonts, especially since there were tons of fonts that I used for Graphics design work on the MAC that were not available on PC without spending $$$$$$ to get an Adobe font library.
I am just confused why AI seems to see it just dfine and recognize that it is Zapf Dingabat, it doesn;'t come up with some weird font info, and it gets the correct color of it. So if it can see all of the info related to the font I do not understand why as soon as I retype it, using the same converted font it comes out just fine. I am unfortunately one of those people that needs to know why, even though I know how to fix it.

Why partner function description cannot see in the billing item?

Similar Messages

Maybe you are looking for