Why PC Suite needs start everytime Windows starts?

Hi,
I would like to see an option somewhere where I switch Nokia PC Suite off so that if wont't start each time that laptop boots. I only need it time to time, so I doesn't need to start up each and every time I reboot my computer.
Petri
Solved!
Go to Solution.

You can disable PCsuite autostart by doing the following.
When in PCsuite, Click on "Invoke at startup" which is at the bottom of the pcsuite window and make sure it is not ticked.

Similar Messages

Why my mac needs password everytime that i do something on finder?

why??

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy – do not type – the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Why do I need to start up Screen Sharing twice to get it to work ?

I have an Intel Mac Mini connected to my TV, so I started using Screen Sharing from my MacBook Pro to be able to work on it when others were watching TV.
Both Macs used to have OSX 10.5 Leopard, and everything worked fine.
Now they both have OSX 10.6 Snow Leopard, and whenever I startup Screen Sharing, the connection-windows asking for my Name & Password comes up properly, but then it hangs... it stays in "Connecting..." for ever (litteraly).
I'm not able to quit or force-quit the connection-window by then, so it stays in view...
(Screen Sharing isn't even listed in the force-quit list as a running app)
but...
when I just try Screen Sharing again, I get connection immediately and it seems to work flawlessly...
...it's just that the connection-window is impossible to quit...
it stays in view an is really annoying...
this looks really crappy...
can anyone tell me why I do need to startup Screen Sharing twice to get it to work ?
Is this a bug ?
(If so : please apple fix this a.s.a.p.)
...or am I doing something wrong ?
(if so : what am I doing wrong ? and how can I get rid of this annoying screen ?)
Thank you for your kind reply.
Toon.B

it's October and this really annoying problem still exists !
the unnamed screensharing-loginwindow keeps "Connecting...", and I'm unable to shut it down...
...even after my screen sharing session is over
...even force-quitting is impossible (this 'app' just isn't showing up in the force-quit-window...)
please Apple - fix this ; under 10.5 it was working great !
Does anyone have any idea how to fix this ?
(besides restarting my Mac)
Thanks !
Toon.B

Why do we need to call start() to execute a thread.

hi,
Why do we need to call thread.start() to execute a thread. why not just calling run().
Vjoy

hi,
Why do we need to call thread.start() to execute a
thread. why not just calling run().
Because, start() does two things.
- start a new thread of execution and then
- call the run method....and calling run does NOT start a new thread of execution. It's just a plain old regular method.

To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD.---I am using a Dell and can't import the CD I need because the window doesn't automatically pop up. How do I fix this? Any thoughts?

"To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD."
I am using a Dell and can't import the CD I need because the window doesn't automatically pop up. How do I fix this? Any thoughts?

You could try my script ConvertFormat and see if you like the results. Would be easier than inserting the CDs and correcting the tag info again. Just be aware this is a one-way trip. Once you've thrown away some quality to shrink the files you can't get it back without going back to the source. You may better off investing in a bigger drive.
If you just want to squeeze more on the iPod you can use the built-in iTunes option to convert files to a lower bitrate as they are added to the device.
tt2

Why are the threads start and terminate randomly?

Hi there,
I got the program below. I am wondering why are the threads start and terminate randomly? Everytime, I run the program, it produces different results.
I know that these four threads have got same normal priority (should be 5), and under windows there is something called timeslice. Then these four threads rotate using this timeslice. How do we know what exactly the timeslice is in seconds? If the timeslice is fix, then why the results are ramdom?
Thanks in advance!
* To change this template, choose Tools | Templates
* and open the template in the editor.
package mythreadone;
* @author Administrator
public class MyThreadOne implements Runnable {
String tName;
Thread t;
MyThreadOne(String threadName) {
tName = threadName;
t = new Thread(this, tName);
t.start();
public void run() {
try {
System.out.println("Thread: " + tName);
Thread.sleep(2000);
} catch (InterruptedException e) {
System.out.println("Exception: Thread "
+ tName + " interrupted");
System.out.println("Terminating thread: " + tName);
public static void main(String args[]) {
// Why are the threads start and terminate randomly?
new MyThreadOne("1");
new MyThreadOne("2");
new MyThreadOne("3");
new MyThreadOne("4");
try {
Thread.sleep(10000);
// Thread.sleep(2000);
} catch (InterruptedException e) {
System.out.println(
"Exception: Thread main interrupted.");
System.out.println(
"Terminating thread: main thread.");
1. Firstly, I set in the main function:
Thread.sleep(10000);
and I run the program it gives:
Thread: 1
Thread: 4
Thread: 2
Thread: 3
Terminating thread: 1
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
Run it again, it gives:
Thread: 2
Thread: 4
Thread: 3
Thread: 1
Terminating thread: 2
Terminating thread: 1
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
And my question was why it outputs like this? It suppose to be:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 1
Terminating thread: 2
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
Why these four threads start and finish randomly each time I run the program? I use Windows, suppose there is a timeslice (i.e. 1 second), these threads have the same priority. Then the threads should start and finish in turn one by one. Am I right?
2. My second question is:
When I change the codes in the 'main' function into:
Thread.sleep(10000); -> Thread.sleep(2000);
it gives me the results like:
Thread: 1
Thread: 4
Thread: 3
Thread: 2
Terminating thread: main thread.
Terminating thread: 1
Terminating thread: 4
Terminating thread: 3
Terminating thread: 2
BUILD SUCCESSFUL (total time: 2 seconds)
Run it again:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: main thread.
Terminating thread: 4
Terminating thread: 2
Terminating thread: 1
BUILD SUCCESSFUL (total time: 2 seconds)
I tried several times. The main thread always terminates before or after the first child thread finished.
My question is why it doesn't output something like:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: main thread.
Terminating thread: 1
BUILD SUCCESSFUL (total time: 2 seconds)
or
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: 1
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 2 seconds)

user13476736 wrote:
Yes, my machine has multi-core. Then you mean that if I got a one core machine the result should always be:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 1
Terminating thread: 2
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
???No.
>
How to explain my second quesiton then? Why the main thread always terminates before some of the child threads end? Thanks a lot.

How to let SOA Suite automatically start Oracle Database services if necess

It occurs from time to time that I forget to start Oracle database services
before I start Soa Suite. Can I somehow let SOa Suite startup script check in advance
if Oracle database services need to be started (and start them automatically if necessary)?
Peter

Hi,
This is a familiar issue. I've come up with the following solutions.
1) On my linux machine, I start the database (EE) and soa suite at boot time using /etc/oratab.
2) On my windows machine, I start the database (XE) at boot time, as a service that automatically starts. The soa suite is started manually. I could start the suite automatically as a service also, but because it takes up so much memory and I do not always want to run the suite, I prefer to start manually. In any way, the database is started automatically before the soa suite.
Hope this will help you.
Kind regards,
H

Why rmiregistry & Server must start in the same directory.

I have 2 servers & one rmiregisty for both. I want to start this servers separetely from different directories.
But if I try to start server from the directory other than where I've already started rmiregistry the server doesn't bind.
Please, can anyone explain why rmiregisty & server must start from the same directory?

Are you sure the classpath when rmiregistry is started includes jar/directories where rmiregistry can find your server stubs ???
rmiregistry does not need your implementation, but it needs your stubs to be able to register your server objects ...

Any ideas why my iMac recently started to randomly restart? Could it be in its death throes?

Any ideas why my iMac recently started to randomly restart? Could it be in its death throes?

Hard for us to answer when you don't even tell us which model your have. If these are kernel panics you need to post a recent log: Mac OS X- How to log a kernel panic.

My mac has started sending yahoo emails out as if they were being sent from an old gmail account I haven't used in years. Why has this just started happening?

My mac has started sending yahoo emails out as if they were being sent from an old gmail account I haven't used in years. Why has this just started happening?

It is important to understand that Mail uses TWO servers, a Receiving Server and a Sending Server.
When you create a new mail message, or reply to a message, the Sender server is shown in the message composition window like this:
That drop-down window allows you to select which of the Sending Servers you previously set up should be used.
In general, once you choose a Sending server, its choice will "stick" for all future replies to messages from that Receiving mailbox.

Why has my iMac started to be slow logging on

Why has my iMac started to be slow when first logging on, is it anything to do with me upgrading to Mavericks from 10.7, and is there any way it can be rectified?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Why has mail suddenly started saying that my outgoing mail server is offline?

Why has mail suddenly started saying that my outgoing mail server is offline?
I can receive mail from my ISP using Apple Mail but as of this morning I can't send via my ISP.
When I check Mail preferences, they say that my ISP's outgoing mail server is "offline".
I haven't changed any settings, so what's gone wrong? I need a fix. At the moment I'm having to use Gmail.

If your email is hosted by Google then there are several known issues with Apple Mail under Mavericks accessing Gmail. Using a web browser is a good backup. In Apple Mail you can goto the menubar, choose Mailbox and choose take all accounts offline. Then bring them back online. Worst case you may need to delete and readd the account (usually if something was setup wrong) Menu bar - Mail > Accounts.
If you have turned on 2 step Google Authentication then you'll need to issue a specific email password for Apple Mail to use to bypass authentication. Google the steps.
Best of luck in getting your mail server online. Hopefully you can specify multiple servers in settings.

Why can't i start my program?

why can't I start my program?

I don't know. Why can't you?
(We need more information than a single line question!!)

Why dialog program should start with SAPMZ or Y...

hi Experts,
why there should name starting from SAPMZ or SAPMY in the Dialog programming..
please let me know details..
Thanks,
Regards ,
Viju

Hi,
any self-programmed programs should start with Z or Y. Otherwise it should be, that it will be overwritten if you have an sap update, new release, oss, .......
And you need a key from sap, if you want to create a program with an other beginning.
regards
Nicole

I have windows 7 and I can't sign into ITunes. Message says to turn off compatibility mode to use. How and why do I need to do this?

I have Windows 7. I was previously using Windows 98 when I set up ITunes and developed a library of music and movies. When I try to log in I keep getting a message stating that am using an older version of Windows and that I need to turn off "compatability mode to use ITunes. Where and why do I need to do this?

Hi there skinguru,
You may find the information in the article below helpful.
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/ts1489
-Griff W.

Why PC Suite needs start everytime Windows starts?

Similar Messages

Maybe you are looking for