Why photoshop CC doesn't let me create a 3D extrusion from selected layer

Check this image and please tell me that why it doesn't let me create a 3D extrusion from selected layer

Hi
Please follow the following link
Photoshop Help | 3D workflow | CC, CS6
or
http://tinyurl.com/7w9hrag
May be it will be helpful
Thanks

Similar Messages

Problem with "Create New Extrusion from Selected Layer" CC 2014

Hello, I'm experienced with Photoshop but am new to 3D text in Photoshop. I type in some text and convert to a shape. When I choose Create New Extrusion from Selected Layer I get dialog box I don't see in any tutorials. It says "You are about to create a 3D layer. Would you like to switch to the 3D workspace? Yes/No, Don't show again." Which should I use for 3D text?
If I choose Yes, all the panels go away and the content in the tool options bar (ribbon?) just under the menu bar go away. I have to restart Photoshop to get the tool options back. What could I be doing wrong?
Thanks - Dave

I just chose "No" and didn't look back. I like my workspace just as it is, and don't prefer Photoshop to change it for me under this particular case.
You can make the 3D panel visible yourself via Window - 3D. I find it's a good alternate for the Actions panel, as I don't have any actions at the moment that work in the 3D world.
The panels you'll want to see easily if you work on 3D are the 3D panel and the Properties panel, among a few others.
Regarding getting your workspace back the way you like it... Note the little selector near the upper-right corner of the Photoshop main window. That can be used to select a workspace. I suggest you experiment and get familiar with the concept of workspaces. You can define your own and save it with a name, and that truly can be helpful.
-Noel

Why new 3d extrusion from selected layer greyed out??

I have an HP6910P and it has 4GB ram AND an intel GPU card why is not working??

There was a bug at one time where really simple paths (like a triangle, for example) could cause that error.
Is your path really simple (I don't plan to go watch the video)? If so, have you installed the latest update for Photoshop? That bug may have been fixed already.
If it's not that, it's possible that if your path is really complex and simply exceeding Photoshop's capability.
-Noel

Photoshop wont allow me to create a 3d extrusion or mesh layer

Daniel Montgomery Jun 8, 2014 9:51 AM (in response to Daniel Montgomery)
Ok, I wasn't able to take a snip shot of the 3d drop down menu.... when i do select the 3d tab, new 3d extrusion and from selected layer and new mesh from layer are both highlighted in the drop down menu; however once i click on either one NOTHING happens! my video driver has been updated and i have the correct amount of memory to run 3d. what do i need to do? Also I'm still in the trial period of photoshop (day7) help me please!

Hi
Please follow the following link
Photoshop Help | 3D workflow | CC, CS6
or
http://tinyurl.com/7w9hrag
May be it will be helpful
Thanks

Create multi-page PDF from multi-layer AI file

This is an old question, I'm sure...
I have an .ai file with 33 layers. Each layer represents an individual page of a manual. I have CS4 ... Is there a way of quickly exporting or saving the document where it creates a PDF page from each layer? Or do I have to go through and individually save each layer as a PDF and then combine them? I'm not savvy with coding, so that route probably won't work without serious hand holding (Windows XP, just in case).
Thanks in advance,
Zack

Create additional artboards and distribute the pages across them.
Mylenium

Why can't I print WORD documents created on my MACBOOK from a PC?

Our daughter is unable to print documents created on her MACBOOK from a PC. She has been saving her documents as WORD files, but the PCs in the university computer lab still do not recognize the document, and consequently she cannot print them from the computer lab PC.
We have experienced the same difficulty when creating a document on the MACBOOK, saving as a WORD document, then sending it as an e-mail attachment. The friends who receive the document on a PC cannot open these documents.
Any suggestions?

Reset iCloud sync state
On Mac:
Close open applications
Open a Finder window
Choose “Go to Folder…” from the “Go” menu
Enter “~/Library/Application Support/”
Find the folder named “Ubiquity” and move it to the Trash
Restart your computer

Why photoshop CS6 doesn't send the print order with the Mitsubishi CK60DW?

The printer driver works because I am able to print on other applications, but that is not the case for Photoshop. Photoshop is able to print with any other printer but not with Mitsubishi's. There is no error message or anything, when I click the button for printing it works as if it would have already printed but nothing appears on the print queue list and nothing happens at all. Does anybody knows what could be the problem? The OS I'm using is Mac's Mavericks

About the only thing I can suggest is to click on "Print Settings" and see if anything looks off.
This is a screenshot taken from CS6 under Mavericks.

My iPod doesn't let me create contacts

All my contacts don't exist any more and i can't sync with iCloud or create new contact. Even after restoring it gives me the same problem . Help me please!!

Have you tried:
- Delete the iCloud account from the iPod. Go to Settings>iCloud and scroll to the bottom of the page and tap the Delete button. The account is not deleted from iCloud, just from the iPod
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Sign back into iCloud 0n the iPod Settings>iCloud

I am having issues on Snapfish, I got all my pictures uploaded, now it doesn't let me create a calendar?

The same thing happened to me on Walmart's Photo site back a couple weeks ago.

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

Why cisco c40 doesn't complete a call to a room from Polycom RMX system?

Dear All,
I am trying to complete a call to a virtual room at Polycom RMX system, but Cisco C40 cannot complete the call. The format required by Polycom is "<ip>##idroom##passroom" but it doesnt work.
I have tryed room@<ip> but it also doest work.
Does anybody know how to fix this problem?

The format "required by Polycom" doesn't comply with any standard what-so-ever.
Their proprietary "URI dialling" format is IP##Alias, which is only supported by them and LifeSize, however, RMX does support Annex O, Alias@domain (alternatively Alias@IP), which happens to be the standard.
First things first; what software version is the C40 running? If it's an earlier version than TC4.2 then URI dialling won't work unless the C40 is registered with a GK and/or VCS etc.
If you are running TC4.2 and later, contact the other party and get them to confirm their RMX has been configured to support Annex O.
You should, alternatively, be able to dial the IP address and then enter the Alias and, if required, PIN using DTMF.
There is yet another option, but you'll need at least a VCS for that, and it is a bit messy; https://supportforums.cisco.com/discussion/11407121/vcs-search-rules-and-polycom
/jens
Please rate replies and mark question(s) as "answered" if applicable.

Firefox doesn't let me install a dictionary toolbar from Collins. It says the toolbar "doesn't have a safe update system". But I want this toolbar so much! How can I install it?

I downloaded the toolbar from the Collins language site. I just searches and translates words based on the online content from Collins language website. Why is Firefox forbiding me from installing my toolbar?

You should contact Collins and ask them to update that Toolbar extension. It has been a few years now since Mozilla coded Firefox to reject extensions that have an '''updateURL''' that isn't on a secure '''HTTPS''' connection, for security purposes.
If you have that extension saved to your disk and it is in the '''XPI''' format, you could open that package with a "zip utility" program (like WinZip) and edit the '''''install.rdf''''' by removing the '''updateURL''' line of code. Also, look at the '''maxVersion''' line of code to see if it says '''3.6.*''' - if not you need to edit that line too. When you're done with the edits, repack the XPI file without using compression. You can then try to install that XPI package using File > Open File in Firefox and see if it works in Firefox. Chances are that it won't, as there were other changes to Firefox at the time the "update only from HTTPS" was introduced.

Firefox doesn't let me copy the web address from the address bar using the context menu with second button in mouse or trackpad

Hello!
I write to report a problem I have with the new update v35 and v35.0.1 Firefox on address bar
With the new version 35 of Firefox on Mac OSX Yosemite, clicking directly with the right mouse button in the address bar to copy the web address, context menu NOT allowed to copy the link, it shaded in gray, inactive ... you have to click on another browser free zone before returning to click a second time and be able to copy the link from the context menu
I mean, with the first right click in the address bar context menu that appears don't allow me to copy the link directly, you have to click on another area and then clicking again with the right mouse button in the address bar to copy the web address (happens to all pages)
I tried to open Firefox with inactive complements and plugins, and reset Firefox to first time use (like the first install) and the problem is here again... With or without complements and plugins the problem is here
This happens before and then when I format my computer
Here I put a screenshot that explains the problem better than my words
http://i.imgur.com/QxKd8P1.gif
I hope you can help me

''guigs2 [[#answer-685712|said]]''
<blockquote>
The icons that show up when you right click in that image do not look like the default version of Firefox, even with the Spanish Dictionary/Language pack.</blockquote>
Hello
The icons in the screenshot is from Linux OS, because I don't know how to capture screen, and somebody in Linux OS made it to show the problem that I was talking about
I don't have any icon addons only have 2 plugins, quicktime (integrated in OS) and adobe Flash, updated both
Before I format my Mac, I upgraded Firefox to v35 and here came this error
Then I format my Mac after days, by subjects of hard disk space, etc... when I install Firefox 35 (new install) the problem was here again
I tried to Open Firefox with disabled Add-ons, and Reset Firefox to an install version, but the problem is here always

Why does Adobe Manager crash when I create to download programs from the creative cloud?

I just signed on to Adobe Creative Cloud and trying to download apps to my desktop and Adobe Manager crashed everytime. I am running on OSX 10.9.4. Any suggestions?

I would click the download button from the apps page. The Adobe Apps Manager would launch then crash. I didn't know what else to do, so I noticed I didn't have the latest Adobe App Manager.
After I updated my AAM, the download worked fine. Thanks you for looking into it.

How to create a pdf file from selected pages of a pdf file?

I basically have an online college catalog that has a lot of information that I need to print out. I know that I can select pages from the main pdf file to print out, but I want to have a separate pdf file that I can look at any time without doing much scrolling.

Hi tanasiluv,
Please check the video: http://tv.adobe.com/watch/learn-acrobat-xi/extracting-pages/
to know how to extract pages from a pdf and create new pdf using Adobe Acrobat.
Regards,
Rave

Create a flat list from SELECTION-SCREEN

Hi,
I have a selection for date on in an report,
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : dat_rang FOR sy-datum.
SELECTION-SCREEN END OF BLOCK blk1.
I want to create a flat list of dates from this selection. This list should exclude the date(s), which are excluded in the selection.
Please give some starters on how to do this.
Thank you,
CD

Here is another example, adding the dates to an internal table.
REPORT zrich_0001.
TYPES: BEGIN OF t_datum,
        datum TYPE sy-datum,
       END OF t_datum.
DATA: lt_datum TYPE TABLE OF t_datum.
DATA: ls_datum LIKE LINE OF lt_datum.
DATA: lv_date TYPE sy-datum.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : dat_rang FOR sy-datum.
SELECTION-SCREEN END OF BLOCK blk1.
INITIALIZATION.
lv_date = '19000101'.
START-OF-SELECTION.
DO.
    IF lv_date IN dat_rang.
      ls_datum-datum = lv_date.
      APPEND ls_datum TO lt_datum.
    ENDIF.
    lv_date = lv_date + 1.
    IF lv_date = '20500101'.
      EXIT.
    ENDIF.
ENDDO.
LOOP AT lt_datum INTO ls_datum.
    WRITE:/ ls_datum-datum.
ENDLOOP.
Regards,
Rich Heilman

Why photoshop CC doesn't let me create a 3D extrusion from selected layer

Similar Messages

Maybe you are looking for