Why photoshop cs6 show my epson scanner in the dialog box. photoshop 7 did show it.
my cs6 does not show my epson scanner in the dialog box as photoshop 7 deid.
What operating system?
You might need to install the optional twain plugin for photoshop cs6:
http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html
(covers cs6 as well)
Similar Messages
-
I am running Lion 10.7.5, Adobe Photoshop CS6, scanning slides on my Epson V600 and can no longer use the scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?
In 10.7 there is not a twain that works with Photoshop for importing with all the options needed to scan transparencies. I noticed that when I was scanning in October 2012 I was still using CS6 so somehow I was managing to be able to use all the scan features.
They sell 2nd party software (VieScan and Silverscript)which I found to be just mimially OK and very hard to use.
I just want to scan like I used to.
Can I use time machine to go back to an earlier operating sysytem LEOPARD, and then do my scans and then save the photos and them go back to the LION system?
I spent 7 hours trying crazy solutions - downloading Windows CS2 Photoshop and then using a program so I could run it on the apple. Then I couldn't figure out how to put a plug in for the scanner in the stupid windows Photoshop program. Googgling the computer like a mad woman trying to ask questions. I am not giving up...
Please help if you can...
Thanks...I assume you've tried using Image Capture. Give VueScan a try.
http://www.hamrick.com -
How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1
How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1
I am not able to see the scanner in photoshop.Are you using a mac or windows? And what version?
-
How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?
How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?
I've tried updating with the USB cord, updating wirelessly, downloading the drivers manually, installing them manually and every concieveable combination of the above. This is getting extremely frustrating and i'm ready to toss this macbook into a wall.
TLDR;
This is my first experience with a macbook and so far i'm finding the whole experience extremely difficult and disapointing. I felt that because of the hype, that macs were top of the line but i'm seriously considering ditching the mac and heading back to pc if this issue can't be resolved. -
I have Photoshop Elements 10 and cant start my Epson Scanner in the profesjonell way only automatic.
I cant start my Photoshop Elements 10 to use my Epson Scanner in the profesjonell way only automatic.
Welcome to the forum.
Unfortunately, this is the Premiere Elements Forum (Video editing software).
I will Move your post to the very active Photoshop Elements Forum, where you will get quick assistance. Your link and any e-mail subscriptions will follow.
Good luck,
Hunt
[Move to Photoshop Elements Forum] -
How to use Epson scanner in the profesjonell way?
Why cant you help me to use the Epson scanner in the profesjonell way?
What do you mean by 'the professional way'? If you are asking about a TWAIN interface you need to look at http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred
Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?
Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh -
Why doesn't the repair box in Aperture show up? and if it does, once you choose repair does it give you an indication it is working?
Winterwren22 wrote:
Why doesn't the repair box in Aperture show up?
Without more information, speculation is a waste of time. At the least tell us what you do, what the results are, and how that result differs from your expectation. Then tell us what steps you have taken to resolve the issue, and what the results of taking those steps was.
once you choose repair does it give you an indication it is working?
Adjustments you make are shown live.
Instructions on the use of Repair Brush are here (ignore "Spot & Patch" -- it is superannuated). -
My adobe photoshop CS6 won't open it says: 'the preferences file is invalid'. HELP!
My adobe photoshop CS6 won't open it says: 'the preferences file is invalid'. HELP!
Please read this and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html -
Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.
Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh -
I dowloaded photoshop CS6 am unable to access for the exercises required of course
I downloaded photoshop CS6 am unable to access for the exercises required of course
And exactly what is it that you are trying to tell us? You're making no sense whatsoever. Clarify - preferrably in comprehensible English.
Mylenium -
I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS
It does ope when selecting PHOTOSHOP MANAGES COLOURS . This is first time in 7 year this has happened.
Any one with ideas/What is your screen resolution?
What operating system? -
when i first inst Photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch Photoshop it say " Photoshop detected graphic hardware is not officially supported if you experience problem please unchecked the use graphic processor check box in the performance panel of the preference dialog" Is this the cause? If so how to uncheck that box? Thanks
Your video card is underpowered for the task.
Go to Photoshop > Preferences > Performance and click on the tick mark next to the box labeled "Use Graphics Processor": -
My nef files used to open in camera raw 8.6. Now when I drag and drop they go straight to photoshop cs6. I don't have the option to edit them in the camera raw editor! Help!
Which operating system are you using?
What is your screen resolution set at?
Maybe you are looking for
-
DNG Profile Editor - Can it show L-a-b values for resulting colors?
Hello, When adjust colors I haven't found out yet how I can see the resulting L-a-b values of the new color. I see the values when I move the mouse over the picture but these are still the original values even after a change. How can I display the va
-
SAP ABAP HR, How to find out relationship in OM
Hi Gurus, in ABAP HR , how to find out relationships in organisation assianment please clarify my Query.
-
Why Creative site doesn't have Speaker setup console installer?
I mean they ship with install disc with Vista version and they expect it to work perfect with Windows 7 or upcoming Windows 8? I want Creative to post there thx console setup or speaker console setup standalone installer on there website. So it would
-
Log4j: Logging Errors(No appenders could be found for logger)
hi, i used logging in my java application. i placed log4j.jar and log4j.xml file paths given in classpath. i am getting 2 warning Messages. Those are as follows Log4j:WARN. No appenders could be found for logger (Myclass.class) Log4j:WARN. Use Log4j
-
"Message Sending Failed" after adding the country code number?
I changed a contact's number (in this case I simply added a country code to it) and now the messages aren't sending to the number I changed it to. How can I get the SMS library to redirect itself to the new number? When I delete the contact, the SMS