Why poor sound on movie?

I just purchased a movie, Robin Hood, Prince of Theves and the sound quality is poor.  Low volume and sonetimes no sound at all.  My IMAC just can't make the sound stable.  Any ideas?

This is at the very least a Windows issue if all plays when when you are in OS X. You might want to try posting in the Boot Camp forum. http://discussions.apple.com/category.jspa?categoryID=237

Similar Messages

  • Why is my  purchased movie sound low

    why is my purchased movie sound low

    It rather depends on the movie. Films with a lot of loud noises such as explosions are balanced with the speech level quite low, so that the loud noises really do sound loud. The result of this is that the dialogue sounds vastly quieter than a pop music recording, which is usually balanced to the highest possible level all the time. It's just a fact of life.

  • Why won't my Apple TV play sound on movies but Why won't my Apple TV play sound on movies but will my TV shows and music?will my TV shows and music?

    Why won't my Apple TV play sound on movies but will my TV shows and music?

    no chain is stronger then it's weakest link if you are downloading from a source which can't keep up it don't matter how fast your internet connection is

  • HT4799 Why I cannot watch movies from Love film on my apple tv? The app is on my iPad and when I switch the movie from iPad to AppleTv only sound is on my TV screen.

    Why I cannot watch movies from Love film on my apple tv? The app is on my iPad and when I switch the movie from iPad to AppleTv only sound is on my TV screen and no picture.

    Many online media providers block this - Sky and Amazon Prime do too I believe.
    I would have to assume that the app providers cannot offer video Airplay for contractual reasons with the movie studios though it may just be they don;t want to enable their apps to do so.
    It's not Apple preventing this, while you could see it would be in Apple's interest to push people to the iTunes store for media it could also drive people away.
    AC

  • Poor sound - FIX - well possibly

    Hi guys,
                 Don't know if this helps you but I was experiencing low sound volumes when playing dvds but all other sound levels were fine (ie windows beeps and system sounds etc.).
     Installed AC3 audio filter and went into the control panel for that and incresed the master gain. now my dvds play at an acceptable level.
    Start Menu -> Programs -> AC3Filter and run AC3Filter Confiig. Increase the Master at Gain, click Apply and OK. You will notice that the DVD movie volume has been increased.
     Sorry I don't know enough about sound to see why this works but it worked for me.
     Hope  this helps
    Now if only can sort out low mic volume issue
    Regards
    Rob
    System Information
    Manufacturer LENOVO Product 0769BRG Serial Number L3E9414
    Base Board Manufacturer LENOVO Product IEL10
    BIOS Vendor LENOVO Release Date 06/01/2007 BIOS Version String 68ET21WW ROM Size 1.00 MB

    dancecertified, 
    I did try to install sp40714.exe by following your instructions.  I tried twice.  Both times, I uninstalled the default IDT driver from Add/Remove programs, rebooted, then installed sp40714.exe.  Both times, after the installation, when I tried to connect any of my USB storage devices, or SD cards, it started asking me to install the drivers, which it could not find.
    This is the second time that I had to format and re-install XP from the recovery disk. 
    This is where I am right now.  I'm on the original sound drivers, vanilla XP install, but at least I can plug in all of my USB peripherals. 
    I've chatted with HP support twice, both times they told me to try to re-install the latest XP driver (sp42298.exe), which not only brought back the old poor sound quality, but didn't frix the USB storage recognition problem. 

  • Poor sound quality on airtunes and airport express

    I recently configured a new Airport Extreme base station and two airport expresses. I used the airport expresses to extend my network but the sound quality is very poor when I run itunes no my stero. can anyone tell me why and how to fix it. The sound is very scratchy and there is no volume.
    Rich

    Dear All,
    I'd like to follow up because I think that the answer to why I am getting poor sound quality my be in how I set up my wireless network. I'd like to get some feedback about this and some help about how to correct it.
    My wireless network has three components.
    1. "Base Station" which is a new Airport Extreme.
    2. Unit "Number 1" which is an Airport Express located in my living room and connected to my stereo. it is 30 feet away from the "Base Station."
    3. Unit "Number 2", also an Airport Express that is upstairs in a bedroom and connected to a ruby imac. via its ethernet port.
    Wireless strength is excellent in all locations and all other services are working well from a laptop, the ruby mac or the imac. My problem only seems readily apparent when playing itunes through the stereo's speakers.
    My wireless system is configured as follows:
    Base Station: Wireless mode is set to participate in wireless network and to allow this network to be extended. The WDS mode is main and is set to allow wireless clients. The two airport expresses are identified by ID number as remotes.
    Unit 1 and 2 are configured as WDS remotes and to allow wireless clients and identify the base station as WDS main.
    I recently configured a new Airport Extreme base
    station and two airport expresses. I used the
    airport expresses to extend my network but the sound
    quality is very poor when I run itunes no my stero.
    can anyone tell me why and how to fix it. The sound
    is very scratchy and there is no volume.
    Rich

  • Poor sound quality when using air play

    How do I fix poor sound quality when using air play with my Denon receiver?

    I am not too sure if this is affected by BT software stack or RF design...
    iPhone 3G with FW 2.x provides Cisco VPN as well as Email support for corporate usage. However, it's weird that business man wouldn't want to use BT headset and talk to people... We are not asking about new feature support, like A2DP, but reliable, stable BT connection ONLY!!
    I've read that lots folks spent a lot of money on purchasing many different BT headsets and tried to get it work with iPhone 3G. I myself tried: Plantronics 510/815/855, Sony HBH-DS970/980, Nokia BH-903. None of them can work fine with my iPhone 3G ever! And iPhone 3G even cause BH-903 and DS-980 hang up after pairing or finishing call!!
    That's why I don't believe it's just a "SPECIAL CASE". How could a product FOR BUSINESS purpose get this kind of basic function problem?
    I hope we will find this issue could be resolved completely with new F/W, like Safari crash problem before. Other than this BT IOT problem, iPhone 3G is really the phone/companion could provide complete solution fulfill my personal and business needs.

  • IPod Photo: Poor Sound Quality - Updates

    As most of us who have bought the iPod Photo already know, the sound quality IS FLAWED. The distorsion (or background crackling) of high frequency/high output sound (such as piano, high output electric guitar & some deep bass output - however the vocals seem to be fine) is there and something needs to be done about it. Some good examples of where this kind of problem occurs, from what I have found are: Radiohead (most of the OK Computer album), The Hives (the iPod Photo cannot seem to cope with their loud distorted guitar style & very high output), and Incubus (a lot of Morning View). Some people who are still using the tinny, lacklustre stock earbuds, or just don't listen to their music carefully enough, or listen niavely, may still not recognise this.
    I refuse to let this issue drop, as I have spent good money on what should be, a technically flawless sound player. I do like this player though (mine is 60GB). The features are good, the photo element is excellent, the 60GB storage is unrivalled, but the main function of the player, to play music, is not good for this one issue. It is so disappointing considering Apple have obviously overlooked this issue (or simply let it slip by thinking nobody would notice), for what is otherwise an excellent piece of equipment.
    I record all my music on iTunes, using the MP3 encoder. Some people think the MP3 encoder in iTunes is poor, but it is as good as most. It is all ripped at 224kbps VBR. I use Shure E2c earphones, which are also excellent, and by far the best value for money if you're looking for a warm tone & deep bass in your sound. The step up in price to the Shure E3c might be worth it if you prefer a more detailed, but possibly colder sound.
    All that considered, there is absolutely no reason why the sound should be poor on my iPod Photo (when it is fine on the iPod Mini, and using Audio software on my PC), apart from there being a hardware/software glitch. There simply must be. Either that, or something in the sound has been compromised to accomodate the photo elements or colour screen.
    I have sent an e-mail to Apple regarding all this, and will hopefully hear from them soon about what is going to be done to resolve this. I will keep this post updated as and when I hear news from them. I also have a case number in motion with their customer services department, and they cannot ignore this anymore.
    Something must be done! Redeem yourselves, Apple!

    yes i know what distortion and clipping are - i don't hear them.
    anyway perhaps this website:
    http://www.dapreview.net/content.php?article.133
    has a solution that will work for you, it's at least worth a try.
    here's a sample:
    "All mp3 files have a default volume tag of around 95 to 105dB (decibels - a unit of loudness). When the iPod plays at this output volume, distortion does not occur. When you boost the iPod's bass however, with the equalizer, you are increasing the volume of the lower frequencies past this value (in order to make them more prominent amongst the other frequencies of the sound), and this, in turn, causes clipping and distortion. Basically, the iPod's amp is trying to output a volume that is greater than its inbuilt volume limit - so it serves crackling. By using MP3Gain to reduce the volume tag of your mp3 files to around 89dB, we can leave some headroom to further boost some frequencies without overdriving the iPod's amplifier."
    "For example: if you boost the 60Hz frequency (low bass) by around 10dB, the iPod will output that frequency at 99dB (89 + 10). At 99dB, distortion does not occur. If you boost a song playing at 105dB by 10dB, however, we get a total of 115dB which, no doubt, has passed the threshold of distortion. From experience, 105dB is about the limit; we need to reduce the volume tag value of our mp3's significantly below 105dB to avoid distortion. 89dB is the value recommended by MP3Gain developers, and I concur, as this value has eliminated all distortion on my iPod that used to result from boosting frequencies via equalizer presets."
    the other "fix" that comes up time and time again involves using higher impedance headphones. I think the basic idea is to go no lower than the stock buds, stick to 32ohm+. a lot of people report problems with 16-25ohm 'phones.
    Along the same lines; you could use a pocket-dock (to get line-out) and a 3rd party amp, then use the headphones of your choice...

  • Why does sound not work on my Mac Air?

    Why does sound not work on my Mac Air --all setting seem okay. OSX 10.9.2 operating systyem.

    Open System Preferences > Sound > Output
    Make sure the coorect output devices is selected and the Mute button is not checked.

  • Poor sound quality in timeline and export; fine in Source?

    Hello all.
    Newbie to Pr but experienced pro in digital audio. I'm stumped and know I'm just missing something somewhere.
    I've made a music video for one of my songs. The graphics are all done (in AE), imported to Pr and eveything looks great. I import the final mix of the audio and it sounds very low quality when played from the timeline and in the final output, regardless of format (I've tried several presets and custom settings as well). I played around and noticed that the audio sounds fine when played from the Source window inside Premier.
    The Pr session is comrised of 18 video tracks (not all playing at once, of course) and one stereo audio track.
    I've tried re-exporting the audio from Logic at different bit depths, sample rates and file formats (mp3, wav, AAC, etc) but the results are the same every time: Source (Pr)sounds fine, Logic output sounds fine, rendered / timeline playback sounds like very low quality mp3 and final product sounds just as bad.
    I've tried everything I can think of. I hope one of you can show me what I'm missing.
    TIA!
    Mark
    Premier Pro CC
    Processor  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory  8 GB 800 MHz DDR2 FB-DIMM
    Graphics  ATI Radeon HD 2600 XT 256 MB
    Software  OS X 10.9.1 (13B42)

    Thank you for the reply!
    I was experiencing the same results no matter what export settings I used. Plus the poor sound quality was present in the timeline itself, without even exporting the project.
    I finally threw my hands up, started a completely new project, drug the same audio file in... sounded fine. Copied / Pasted the video clips from the original, broken project and boom, eveything is fixed. Yeah, corrupted Pr file it turns out. All I had to do was start a new project and import all the old components.
    I've had to do this in Logic a lot (increasingly, these days). I just wish I'd tried it 10 hours earlier! Ha.
    Anyway, problem solved, and thanks very much!

  • Why do I get movies on itune in German? How can I get them in English? I am registered as living in Zurich, but I don't speak German :-( Thanks in advance

    Why do I get movies on itune in German? How can I get them in English? I am registered as living in Zurich, but I don't speak German :-( Thanks in advance

    If you must. You can open a new iTunes Store account in the country you are from. In iTunes scroll down and change the country flag icon to your country and registry. If you don't have a credit card from your home country you can use gift cards instead.

  • When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

    When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
    If I use google it works. If I use Ichat, it works. If I use skype it works.

    This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
    Try turning down the speak volume (System Preferences->Sound->Output->Output Volume)  or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

  • Why are all my movies and tv shows now on my ipad with the icloud icon?  How can i get rid of them?

    Why are all my movies and tv shows from my library now on my ipad with the icloud icon?  I have turned off all icloud related services. I have never used it.  On top of that, my ipad now gets stuck on step 5 of the sync - waiting for changes to be applied and never finishes.
    Help

    Hi, go in Settings, under Videos turn off "Show all videos"  this will remove the purchased videos to be displayed in the Video app.  The same can be done with the music.
    As for Step 5, connect you iPad and on the summary Tab, uncheck
    "Sync only checked songs and videos".  Then wait, it takes a while but this made it work for me after many restore attempts.
    good luck

  • Why the menu to move from one page to another is not seen when the page is online?

    On my web, I have different pages like 'Homepage' or 'Contact' but when I publish my web I can not see the menu.
    why the menu to move from one page to another is not seen when the page is online?
    Thank you,
    Roger.

    Where are you publishing and how are you uploading the files?

  • Poor Sound 800w with BT3030

    I just got a BT3030 for listening to mp3s and streaming radio on my 800w.  The sound is tinny and 'digitally'.  I have tried this on another 800w and it sounds poor there too.  I then tried the BT3030 with my old 700wx and it sounds fine-- could be louder, but fine.
    Is this just a problem with the 800w or is this 6.1 or what?  No adapter for (real) headphones and now poor sound via BT?  Should I have purchased the Mogul?
    Any registry tweaks for this?  Anything?
    Thanks,
    Post relates to: Treo 800w (Sprint)

    Hey Failagain,
    Thanks for the question. The following article may help you to isolate this issue further. Based on the information you provided, the next best step may be to restore the iPod nano:
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Thanks,
    Matt M.

Maybe you are looking for

  • Using a breath controller in logic pro x

    HI has anyone ever configured logic pro x to work with a BC as to how to see the CC for the virtual instrument  the same as for the BC cos when i use the BC the volume of the VI goes down quite a lot thanks

  • Project Pro for Office 365 vs. Project Pro 2013

    Hello, As I already have Project Pro 2013 installed on my PC (which is able to connect to Project Online) I'm not sure if the MS Project I'm using is Project Pro for Office 365 vs. Project Pro 2013. Is there any difference in the interface of the 2 p

  • Why do videos ALWAYS freeze up when you just play them on itunes?

    So i just bought a new music video on itunes and when i play it on the computer the picture will stop but the song will continue to play. It ***** because I can't even finish the song. Advice?

  • How to create a menu for bootcamping at startup

    I boot camped my mac and so did the college I attend. They have a system that lets us choose what start-up disc you want to boot on without pressing any option key or setting the start-up disc from system preferences. Once restart it goes straight to

  • Cannot download anythng in my n8!

    ovi does open but it always gves error when i try to download anythng!