Why prereq check is removed from AD.I minipack

hi,
as far as i know, prereq check is removed from AD.I minipack..what is the use of removing....
since we know before this..if any patch we apply with adpatch, if it checks the prerequisite information..it will be good for us, so we will come to conclusion that, we missed some prerequiste patches...but why it is removed from AD.I minipack...
to know the prerequistes check, we have to issue the adpatch options=prereq externally from AD.I minipack....
eventhough, there is option like adpatch options=noprereq....it is also there in AD.I minipack...since we know, from AD.I minipack, if we apply any patch, it will not check the prequisites..but what is the use of options=noprereq????
anybody sched some light on this????

why oracle has removed that feature
Changes in Default AutoPatch Prerequisite Checking Behavior
Earlier versions of AutoPatch (adpatch) would automatically check whether the prerequisites for the current patch were installed properly. An important change to the AutoPatch defaults was made in the Applications DBA Minipack 11i.AD.I.2 release: automatic checks for prerequisite patches are now disabled by default.
When you run AutoPatch AD.I.2 and higher, sharp-eyed DBAs may notice the following warning:
Attention: AutoPatch no longer checks for unapplied pre-requisite patches. You must use OAM Patch Wizard for this feature. Alternatively, you can review the README for pre-requisite information.
As of AD.I.2 and higher, if you want prerequisites to be checked, you now must explicitly pass the parameter options=prereq to AutoPatch in addition to any other parameters that you may already be passing. For example:
$ adpatch options=prereq
This was a somewhat controversial decision within Development. Proponents for disabling prerequisite checks correctly note that certain patches won't apply even when their prerequisites have been applied as part of other combined patchsets.
The downside of this new default behavior is that you may end up applying a patch without knowing that the prerequisites are missing. This is a particularly tricky problem to debug when dealing with technology stack patches.
So, our standing recommendations are to check a patch's README carefully, or just add the options=prereq parameter manually when running AutoPatch.
Source: Steven Chan Blog
http://blogs.oracle.com/schan/discuss/msgReader$42

Similar Messages

  • Would like to know why I have twice removed from the account for $ 1

    Would like to know why I have twice removed from the account for $ 1

    Your post makes no sense in English. 

  • Why Annots:Tool:InkMenuItem removed from acrobat reader x(10.1.2) registry

    why Annots:Tool:InkMenuItem removed from acrobat reader x(10.1.2) registry

    The UI was changed a lot in Adobe Reader 10.x.  Several menu items went missing and were moved to the Panels on the right.

  • Why is blurred lines removed from itunes

    why is blurred lines removed from Robin Thicke's Album?

    Interesting, looks like some sort of weird glitch in the iTunes Store. Track 10 is showing up twice, and track 1 is not showing up at all. I would venture to guess that it would download correctly if someone actually purchased the album, but I won't be the one to test that theory. Hopefully they get it resolved soon.
    Here is what the OP is talking about:

  • Why has Easter been removed from the U. S. Holidays calendar? The last year it shows up is 2012.

    Why has Easter been removed from the U. S. Holidays calendar? The last year it shows up is 2012.

    some sort of bug - inexplicable - causing problems with iPad calendars.
    You will see many threads regarding March 2013 issues.
    this is one of them:
    https://discussions.apple.com/message/20524762#20524762

  • Why is MS-6167 removed from the archives?

    Why is the motherboard MS-6167 removed from the slot-a archives? It was there yesterday.

    some sort of bug - inexplicable - causing problems with iPad calendars.
    You will see many threads regarding March 2013 issues.
    this is one of them:
    https://discussions.apple.com/message/20524762#20524762

  • Why was some music removed from store?

    I saw the The Mighty Underdogs' CD's have been removed from the iTunes store.  Anybody have any clue why?  I was going to purchase yesterday and only two videos and a few singles were available.  Weird.

    I am not sure why you think it is weird.  Retailers, including iTunes, have stuff going on and off sale all the time. 
    I haven't seen any news particularly about Underdogs, but it could possibly relate to licensing, distribtuion strategy, pricing issues, or many other reasons.

  • HT5510 Why was app gifting removed from iOS6? It's almost Christmas and it's still not back...

    I mean, Google Maps was a stupid thing to remove but I can see there may be some strategic importance to getting Google out of the system, removal of the Japanese to English dictionary was a stupifyingly pointless move but it's unlikely to stop any revenue ecxept from non-JP speakers trying to buy apps they probably can't use, but I mean, come on, what?
    Why remove a one-click button that is simply a revenue stream from people's willingness to share? Have these people really lost the plot?

    Fixed this with apple care.  Had a unique situation.  Will share by email if interested.

  • Why where special caracters removed from the German keyboard in iOS 4.2?

    Hi,
    with iOS 3 you could access special caracters like è é etc by pressing the e key when using the standard german keyboard on the iPad or iPhone.
    This is gone with iOS 4.21 - the only additional caracter is the letter ė.
    As my first name contains the letter é this is very bothersome as I need to work with an additonal (french) keyboard layout to type my name.
    Why where most of the letters removed, when will they be back?

    This problem has been raised here a few times already. Nobody knows why Apple did this. You need to ask for a fix via this channel:
    http://www.apple.com/feedback/ipad.html

  • Transfer Orders visible in LRF1 -Why , can they be removed from there

    HI SAP Experts ,
    A Couple of Transfer Orders are Vsible in LRF1, some of them are in Open State .
    Some of them are in Comfirmed State
    Can we remove them in such a way that they won't be visible in any Queue
    couple of users have generated them
    Visible in everybody's id in LRF1
      Awarded Suitable Points
      Regards
      Adarsh

    Hi ,
    How can we Change the Layout so that the TO is NOt visible in any Queue
    Incidentally all the TO's which are visible are Unconfrimed , I could have suggested User to confrim by LT12 but issue is among all 10 items in TO , 9 items are deleted by LT15 , One item Remains to be  Processed hence it is visible in the Queue
    Also , overall Indicator is NOt selected in TO Item level
    Awarded Suitable POints for Answer
    Regards
    Adarsh

  • Why the URL gets removed from the WAS ?

    Hi,
    I deployed a WebDynpro and when I call the URL (for example: http://server:50000/webdynpro/dispatcher/local/WD11111/MyApp), I get that the application is not found.
    So I deploy it again and it works for few days and after I get the same error message.
    How can I solve the problem.
    Thanks in advance.

    Hi,
    fully qualified domain name
    Regards, Heidi
    PS: For Web Dynpro ABAP, see http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
    Message was edited by: Heidi von Geisau

  • Packages removed from DP's with machine account

    Hi,
    We have an incident wherein the packages are removed from the DP's with machine account.
    ISSUE: Packages removed from the DP’s.
    The package was successfully copied to all the DP’s on Friday however, today early morning the packages were missing from the DP’s.
    The logs mention the details of package being removed with the “Machine account”.
    SMS Distribution Manager successfully removed package "C00007C5" from distribution point "["Display=\\DP_NAME\"]MSWNET:["SMS_SITE=820"]\\DP_NAME\".
    The only distinguishing factor i could find in the distmgr log shows the below
    STATMSG: ID=2330 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AUDEMPSSSS01 SITE=806 PID=2232 TID=3872 GMTDATE=Mon Jan 06 01:52:42.099 2014 ISTR0="C00007C5" ISTR1="["Display=\\DP_NAME\"]MSWNET:["SMS_SITE=806"]\\DP_NAME\"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="C00007C5" AID1=404 AVAL1="["Display=\\DP_NAME\"]MSWNET:["SMS_SITE=806"]\\DP_NAME\"
    SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 3872 (0x0F20)
    Updating package info for package C00007C5 SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    Package C00007C5 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    Sent package server list to parent site R08 for package C00007C5 SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    StoredPkgVersion (2) of package C00007C5. StoredPkgVersion in database is 2. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    SourceVersion (3) of package C00007C5. SourceVersion in database is 3. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AUDEMPSSSS01 SITE=806 PID=2232 TID=5128 GMTDATE=Mon Jan 06 01:52:42.114 2014 ISTR0="Update Default User Account Picture" ISTR1="C00007C5"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="C00007C5" SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    Why was this package removed from DP??
    System Security analyst at CapG

    The Status message shows this way
    "SMS Distribution Manager successfully removed package "C00007C5" from distribution point "["Display=\\DP_NAME\"]MSWNET:["SMS_SITE=820"]\\DP_NAME\"."
    And under the distmgr log,
    Updating package info for package C00007C5 SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    Package C00007C5 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    Sent package server list to parent site R08 for package C00007C5 SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    StoredPkgVersion (2) of package C00007C5. StoredPkgVersion in database is 2. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    SourceVersion (3) of package C00007C5. SourceVersion in database is 3. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AUDEMPSSSS01 SITE=806 PID=2232 TID=5128 GMTDATE=Mon Jan 06 01:52:42.114 2014 ISTR0="Update Default User Account Picture" ISTR1="C00007C5" ISTR2="" ISTR3="" ISTR4="" ISTR5=""
    ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="C00007C5" SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    I can see the packages were removed with "Machine account"
    Why did the machine account delete the package from the DP's?
    Does the difference in DB version and Source version of the package make any difference???
    System Security analyst at CapG

  • Country removed from subscription list

    I was just wondering why Sierra Leone was removed from the subscription list. Sierra Leone is the only country that I call using skype, but there are cheaper ways to call if skype no longer provides that subscription. Skype's losing lots of business. Not just from me. From Peace corps families nation wide!

    I must not be explaining this very well, and I apologize for that.
    These are time sheets we're working with, so each user needs a certain set of people to approve and review his/her time sheets. The workflow we have running on each time sheet created reads which department the user is in, matches them with the row that
    contains the field "department" that matches their department, and gives permission to all of the users in the remaining fields TS Approvers and TS Reviewers. If I update these fields at all, the new users in these fields get permissions for that department's
    time sheets, but the people I removed from these fields do not stop getting permissions. It's as if there is a cached copy of the list which is being used by the workflow to assign permissions. This list will fluctuate, so it is not a viable solution to keep
    running powershell scripts to remove people from each of these items after they have been removed from the list.

  • Why when I removed smart playlists from my iPhone are they removed from iTunes?

    So I was trying to remove some playlists from my iPhone then reload them so the sort order would be correct.  But after I removed the playlists from my phone then synced with iTunes, the playlists were removed from iTunes.  Why?  Can they be recovered?  I had a few I really liked.

    Hi Makki28,
    I'm sorry to hear you are having this issue with your iPhone. If you are having issues with incomplete transfers of your purchases from your iPhone to iTunes on your Mac, you may want to double check that you are following the steps as outlined in the following article:
    Re-download or transfer your iTunes Store purchases from an iPhone, iPad or iPod to a computer - Apple Support
    If you are still having incomplete albums, you may also want to try directly redownloading the purchases from within iTunes, as noted in this article:
    Download past purchases - Apple Support
    Regards,
    - Brenden

  • Why i can't remove my credit card number from my account ?

    why i can't remove my credit card number from my account ?
    i always remove my credit card number after purchase apps , but i try at this morning it did't allow be to remove it anymore , can someone tell me why ?

    It happens on Mac App Store & iPhone App store as well.
    So clearly the problem is on my Apple ID..
    I've changed my credit card details on my Apple ID but it doesn't reflect onto my phone when I login after restarting the phone. Even if i sign out.
    When it reaches the part where I would need to verify my phone after entering my password. It just keeps requesting for my password and never shows me anything.
    If I click update apps it'll just disable my account. Even on my Mac App store same thing happening.

Maybe you are looking for