Why PSA is mandatory in BI 7.0

Hi Experts,
Why PSA is mandatory in BI 7.0 not in 3.x version.
Regards
Gotika Reddy

in continuation for more details
NW2004s Data flow
R/3---->PSA only (using Infopackage) for all the Loads -Mandatory
PSA -
>ODS/Cube -->load using DTP ,create transformation first
no Datamart architecture in NW2004s
so ODS -
>Cube load using DTP ,creating transformation first
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
Pre-requisite-
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
ODS to Cube -
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/dc87c1d711f846b34e0e42ede5ebb7/content.htm
Hope it Helps
Chetan
@CP..

Similar Messages

Why is my MANDATORY PIN constantly taken off my account? Who is doing this?

I set a mandatory -- MANDATORY -- pin on my account three times over the past two years. I HAVE BEENASKED for my pin for a few times afterward, which I have and was glad to be asked. It shows someone is doing his/her job.
But always ALWAYS this pin "gets taken off" and nobody knows why.
Once, one person said "oh the notes on here say to remove the pin"
I was livid.
Not from me.
Has anyone had this happen?
I have noted over the month of March, a lot of problems with my notebook.
It seems to me, a lot of stuff that only someone getting into my account coulddo. This is why IHAVE A MANDATORY PIN. THAT MEANS, ALWAYS, NOT JUST WHEN I FEEL LIKE IT.
I noted it to the lastest tech I spoke to today, and he put it back on, could not explain why it was taken off or when .
I am soooooooooooo tired of Verizon being like this.
I think I pay too much for what I get, I also deserve privacy and IF I PUT A PIN ON MY ACCOUNT, IT BLOODY WELL BETTER STAY THERE.
And when I come online, the tech said there is a "contact us" hyperlink on the page you should be able to send a complaint.. I told him I have been clicking that "contact us" link over and over nad over and the only think that happens is I get a big gray box that says,"changes to fios tv and something about my set top box"
I think the nasty chat person I had -(oh, life chat is now no longer available, gee) is doing this so I won't make a well deserved complaint.
I am paying too much money to 1) have my mandatory pin get taken off at the whim of someone who may or may not work here because Verizon is not affording me appropriate secuirty and 2) lousy service when you can't access a link it just goes in circles. I clicked on that fios gray box and it did not go away, it just routed me back. THIS IS DELIBERAT TO BLOCK PEOPLE.
So by now, I'm irate.
I put a mandatory pin for a **bleep** good reason. I had a burglary in Jan. 2012 and every bit of personal info was taken.
Off and on I've seen my account with changes -- someone in my sub account made it so you could log ina nd watchg tv
i could just scream
qand these people at verizon want more and more and more money and provide NO SECURITY ON THE ONE THING THAT IS SUPPOSED TO HELP KEEP ME SECURE.
I AM GOING TO WRITE THEM IN NEW YORK, AND DO WHATEVER ELSE I CAN BECAUSE I'VE HAD IT.
i ask everyone, put a pin on and see how long it lasts.
If you have had a mandatory pin taken off without your doing it? I'd love to know.

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Why PSA data show red status when opened but green on PSA page?

Run RSA1 -> click PSA to open PSA page, locate one infosource and find the PSA under it, find the status column shows it's green, but when opening it, find the 1st column shows red for each row. How does the inconsitance occur?
BTW, if we open the infopackage monitor for the above one, find a weird thing is that each request get two consecutive processes running with a circle of red ball and green ball in the left frame. Double click one of them, in the right frame and click the monitor Status tab, the msg window is as following (in between two dashed lines below):
Incorrect data records - error requests (total status GREEN)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target and can be used in reporting.
The incorrect records were not written to the data target, but were posted retractively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors, and post the error requests.
Sounds like the data failed to uploaded to data target due to error in PSA, but why the status show green in somewhere? And if clicking the Details tab, all show green! Weird!
Thanks

Hi Kevin,
In your InfoPackage Update tab, click the Error Handling button. It seems that the Valid records update, request green option is chosen. This is why you see the green request and some error records.
This means that the corect reocrds were loaded and are available for reporting, but the incorrect ones were left behind. This is used to check the erro records separatelt so that they do not disrupt the entire data load.
Hope this helps...

Why PSA

The source data wil be stored in psa after running the ip.
1) It can be used to reconstruct , if we delete the data in the cube
2)we can manipulate the data in the psa as per the requirement and then send to cube.
Is there any other use why we need to go fro PSA?
Thanks for all the replies

Hi,
Used for Staging purpose.
The requested data is saved, unchanged from the source system
The data format remains unchanged, meaning that no summarization or transformations take place
The temporary storage facility in the PSA also allows you to check and change the data before the update into data targets.
The PSA delivers the backup status for the ODS (until the total staging process is confirmed).
If you set the PSA when you are extracting data, you get improved performance if you use TRFCs for loading the data.
Regards,
Vishnu.

Why Price is mandatory in PR even when set as Optional

Hi All,
We have a material for which we did not maintain the price in material master and in the purchase requistion we maintained in the screen layout we have maintained the price and price unit as optional.
While creating the Purchase requistion we are getting error " saying enter the price".
Why we are getting this error.
Thanks,
Vengal Rao.
Edited by: vengalrao jalgam on Sep 16, 2011 5:59 PM

It is possible not to enter the material valuation price in the Purchsae requisition in case the material price is not known at the time of the Purchase requisition creation. The material valuation will flow from the material master data if the material value is entered in the material accounting view.
In case the field is put on the display then the material price is not required to be maintained at the purchase requisition level.
Change the enjoy transaction settings in the system:
SPRO - Materials Management - Purchasing- Purchase Requisition- Define Screen Layout at Document Level
In this select the enjoy transaction ME51N and change the indicator for the Price from Quantity and Price.
hope it helps

Why does the mandatory field indicator (*) not aligned in Firefox 4.0?

[http://i56.tinypic.com/24ng1vt.png Asterisk not aligned in Firefox 4.0]

Who makes your mouse? Is it a Logitech? If so, please see this post: http://forums.mozillazine.org/viewtopic.php?f=38&t=206293

Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

Why do we need UPA for rehydrating users in Sharepoint provider hosted app scenario?

Our on prem. SPS 2013 environment is configged to authenticate through ADFS against a third party IDP. We know nothing about these users, the returned SAML contains a role and based on this role we authorize user in SPS. This works great.
No we are investigating high-trust provider hosted apps (on prem, no azure acs). We have created a simple MVC, and configged it to use ADFS. Now if users are authenticated from SPS they can call the MVC and the ADFS token is reused. Works perfect. Only thing
is that whenever we need to call Sharepoint code through the client objectmodel, we get a 401 and the ULS shows that SPS is not able to map the incoming user to a user in User Profile DB. Off course it can't because the user is not in UPA and cannot be in
UPA beacuse the users are stored outside our domain and there is no way to sync these to our SPS environment. I read a couple of blogs about this issue and the all say that we ned to sync with the user repository to fill upa; but again that cannot be (suppose
on of our IDP's was facebook...?)
The construction works if we use apponly security, but now we lose our SPS security. So my real question is, can we some how workaround User Profile service in the scenario, or at least without needing to sync these users.
Any help/guidance is much appreciated!
Sander

Hi John,
No we were not able to find a solution. The provider hosted app-model of SPS 2013 just does not take into account that in some cases useraccounts are not available. We could not find a way around user rehydration. Off course you can all ways use another
security model like app-only policies, but that was not sufficient for us. It was also kind of disappointing there was no way to handle this; th emost problematic for me personal is that I cannot think of a reason why the rehydration can not be skipped in
some way. If you configure it to run within SPS itself, rehydration is not necessary, so why it seams mandatory in provider hosted app beats me ;-)
We went back to good old farm-solutions with webparts.
Sorry
Sander

Aggregating measures in Fact mandatory

Hi All,
Am new to obiee.. just wanted to know, why is it mandatory to apply aggregation on fact table columns??
Thanks in adv..

Hi friend,
when you apply aggregation on fact table you are creating measures to evaluate the performance of the business. It makes no sense to create a BI application without build measures. That measures provide information to users for decision making.
I hope this resolve your doubt.
Regards.

How to load data from r3 to PSA

hellow gurus
m new in BI 7.0
i m workin in Standard cube 0rt_c05
wid data source 2lis_02_scl..
i have replicated the datasource from r3 to BW
now i wanaa know . how to push data from R3 to BW . till PSA level and then to Cube,..,
thanking you
points will be assigned as my gesture for efforts
Regards
Rahul

hi,
data loading in BI 7.0 from fla file extraction.
fisrt create one Cube or DSO with the same structure which you have in flatfile..
and activate it..
->now comes to Datasource tab> create one Datasource here you need to select type of data for example.. select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab --> and load preview data Activate it..
now select your datasource and create info package and schedule it.. now your data will loded in to PSA level...
> and now comes to info provider select your cube.. and right clcik it.. and create transformations.,. and activate it..
> and create DTP -- Activate it.. and Execute it..
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> (DTP)-->Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation. Here's how the DTP data load works:
1) Load InfoPackage
2) Data gets loaded into PSA (hence why PSA only is selected)
3) DTP gets "executed"
4) Data gets loaded from PSA into the data target once the DTP has executed
Ramesh

Upload data from Excel to BI

Hi 2 all,
Can anyone please send me the complete steps for uploading of data from excel to BI??
Also tell me that when we use DSO or when we use infocube? and if we design query in query designer then we use info cube fields or DSO fields??
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi,
there is no separate Tcode for 3.5 environment... but in RSA1 itself they give 3.X functionality also.. So, if you want to follow the 3.5 procedure you can go thru that... in the Infosource tab--> select your info area -->and right clcik it.. ->in that create INFOSOURCE 3.X.. for that just right clcik ur CUBE or DSO and --> Additional functions --> Update Rules.. and like that you can follow the same procedure which you done in 3.5..
and for data loading in BI 7.0 from fla file means
fisrt create one Cube or DSO with the same structure which you have in flatfile..
and activate it..
->now comes to Datasource tab> create one Datasource here you need to select type of data for example.. select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab --> and load preview data Activate it..
now select your datasource and create info package and schedule it.. now your data will loded in to PSA level...
> and now comes to info provider select your cube.. and right clcik it.. and create transformations.,. and activate it..
> and create DTP -- Activate it.. and Execute it..
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> (DTP)-->Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation. Here's how the DTP data load works:
1) Load InfoPackage
2) Data gets loaded into PSA (hence why PSA only is selected)
3) DTP gets "executed"
4) Data gets loaded from PSA into the data target once the DTP has executed
1) Create a data source
RSA1->Source Systems->FILE(File)->PC_FILE(Filesourcesystem)->Create Application Component(optional)-Create Data source
2) Create the data provider
3) Create Transformation
Right click on the data provider, choose 'create transformation' and choose your data source (give relevant data source and its type)
Just connect the relavant fields between your data source and data provider.
4) Create DTP
Then Double click on the DTP node created under yous transformations. choose the extraction mode
5) Load the data: there are 2 ways:
you can run the infopackage and DTP separately or create a process chain consisting of these infopackage and DTP and run.
Also check /people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option for hex option
Thanks,
Sankar M

MDM catalog integration with SRM 7.0

Hi all,
We will be upgrading from SRM 5.0 to SRM 7.0
We currently have CCM .....Few questins on catalog enablement for us with SRM 7:
1.With SRM 7,0,can we use CCM oor MDM is the only option???
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
5.What are additional features in SRM MDM 3.0 catalog in contrast to CCM??
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
9. Where can I find some sample catalog files for test upload?
10.What are the lastest SP for MDM available for integration with SRM 7.0??
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
I have gone through the help links but wud like ansers to above ques based on experiences of the forum members...Please provide inputs to my above queries if anybody has worked on MDM catalog integration with SRM 7.0....
Thanks for your time.

HI,
1.With SRM 7,0,can we use CCM oor MDM is the only option???
   You can use any catalogs which support SAP OCI interface.
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
   MDM Server(contents) and AS Java(for UI) are required. Please check the installation guide.
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
   Same as SRM 5.0. Define External Web Services.
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
Yes. You can use Import Manager. No issues.
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
MDM Extractor is available.
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
Mainly for contents mapping.
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
Any. Even for DB interface is also supported. You see all options when you run import manager.
9. Where can I find some sample catalog files for test upload?
Sample repository definition is delivered. You can manually create 1 entry by Data Manager.
10.What are the lastest SP for MDM available for integration with SRM 7.0??
You can find it SAP Service Marketplace. http://service.sap.com/swdc
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
You can use contract and contract items are transfered to Catalog.
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
Yes. Catalog is just Catalog.
Regards,
Masa

Flat File BI 7.0

Dear All,
I am doing flat file upload in BI 7.0 for the first time. I have to upload master data through flat file. Anyone with documents or links helping me on the same? Kindly do send me.
Regards,
Jack Silverz
jacksilverz07 at gmail.com

hi,
data loading in BI 7.0 from fla file extraction.
fisrt create one Cube or DSO with the same structure which you have in flatfile..
and activate it..
->now comes to Datasource tab> create one Datasource here you need to select type of data for example.. select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab --> and load preview data Activate it..
now select your datasource and create info package and schedule it.. now your data will loded in to PSA level...
> and now comes to info provider select your cube.. and right clcik it.. and create transformations.,. and activate it..
> and create DTP -- Activate it.. and Execute it..
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> (DTP)-->Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation. Here's how the DTP data load works:
1) Load InfoPackage
2) Data gets loaded into PSA (hence why PSA only is selected)
3) DTP gets "executed"
4) Data gets loaded from PSA into the data target once the DTP has executed
Ramesh

Apache2.x and Tomcat5.0.x & Session' data

hi everyone,
i was just wondering how i can pass user's session data from Apache to Tomcat and visversa:
an examples
im restricting access to a directory secret/* with Apache Authentication on Mysql (AAOM)
Inside that directory ther is a link to one of my servlets
what i want is to pass the user's data already collected after the log in against AAOM (username, etc ...) to that servlet
ill be glade for any ideas how i can perform this
ps im using mod_jk which mean im using tomcat only as a servlet container behind apache since the most data iam serving is a static data
Thanks in Advance
YEL

Hi,
I believe that this must have been discussed somewhere but as you are saying that you could not get clear answers, please find the answers.
In 3.x, we had Infopackages loading the data to infoproviders. In the infopackage itself, there was an option which asked you the way to update. i.e. Only to PSA, To PSA and subsequently to infoproviders, To infoproviders only. Thus, PSA was optional.
In 7.x, PSA are mandatory and Infopackages can load the data only to PSA. DTP loads the data from PSA to infoproviders.
DTP also provides many new options to us in BI. e.g. You can carry out delta load from PSA to infoprovider.
Edited by: Rahul K Rai on Sep 6, 2010 3:56 PM

PSE 7 RAW to JPEG

I seem to remember in the past I could convert pictures in the RAW format to the JPEG format using PSE 7. Now all I can do is convert the RAW to a JPEG 2000 format. I have XP. Windows Media player won't open a JPEG 2000 file. Any ideas why PSA 7 doesn't have a RAW to jpeg converte?

Thank you for your recent email. My inbox is protected by ChoiceMail One, the leader in anti-spam technology. ChoiceMail is holding the message you sent because your email address is not on my list of approved senders.
Please click on the link below. This will take you to a sender verification page. Sender verification is a one-time process which takes only a few seconds. This will let me add you to my list of approved senders and receive your original email.
ChoiceMail sender verification: http://cm.digiportal.com/php/CR/cmregister.php?data=56UqYN5Y34CQ7UDGRIDCJuEyJN7V28Eva9LBcy HeRib%2FBBBjA1cWQWbYdjlabUSV0yc%2F78Mi%2B4D3OaauUmZRTADd6CYAs6WvE0WQJVTrvcXTs9XalorKGg%3D% 3D
Please be aware that if you do not complete sender verification within 4 days, ChoiceMail will automatically delete your original message.
To find out how ChoiceMail can make you spam free, please visit http://www.digiportal.com

Why PSA is mandatory in BI 7.0

Similar Messages

Maybe you are looking for