Why QUAN_PO_E field in BBP_PDIGP tabl is not reset when PO item is deleted?
Hi Gurus,
For some reason, after an item is deleted at PO, its corresponding QUAN_PO_E field in BBP_PDIGP table of SC has the same quantity ( for example, 3 pieces ).
When the buyer access the SOCO, the item is not displayed because previously the system make a validation: if quantity is equal to quan_po_e ( the difference is zero ), eliminates the item to display and reset the SOURCE_REL_IND to space.
Somebody knows the reason for which the field QUAN_PO_E is not updated with the value of zero after deleting the items of the purchase order?
How can I update the QUAN_PO_E field on safe way maintaining the data consistency?
I have posted new message in order to try separately from thread Re: SOURCE_REL_IND : shopping cart not appearing in the sourcing cockpit
Hi,
Could you please check if note 1326380 is implemented ?
The implementation of this note will not affect the older SC which
didn't return to sourcing after PO deletion. But the issue should not
happen for the POs that are deleted after the implementation of the
note.
Please, check if field QUAN_PO_E (table BBP_PDIGP) was not cleared after
PO deletion.
If not, you can clear this field for the SC item (for which the PO has
been deleted), then clean_reqreq_up should send the SC to sourcing.
So a work around would be to manually delete this field, and run
clean_reqreq_up again.
Summer
Similar Messages
-
In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED
In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED. I don't know if an option of configuration adjustment exists in Dreamweaver that corrects the problem. It is Dreamweaver CS4 - Version 10.0 build 4117.
I have traced the problem to a corrupted profile. When I captured the images in question, I also used Color Cherckr to create a profile for processing. When I apply that profile to the adjustments I make, I can no longer "Edit In". If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue. Something seems to have corrupted the new profile. I will re-create the profile and see if the issue is resolved.
-
HT4528 why did it say my phone was "Not Trusted" when i updated it
why did it say my phone was "Not Trusted" when i updated it
Is your phone jailbroken?
-
Why are some apps that I bought not on my purchased items on my itunes account?
Why are some apps that I bought not on my purchased items on my itunes account? I bought 4 apps, then had to reset my iPad, later when trying to download them back onto the iPad, they were not listed under by Purchased apps in my account in iTunes. Thanks for any help!
Plug in your iPhone to iTunes on your Computer, let it sync the games onto the Computer, then plug in your iPad and go to Apps in iTunes and select the apps then apply and it will download them to the iPad :)
If you have trouble when in Apps in iTunes on your Computer, it will say iPhone and iPod touch Apps. Hope this helps!! -
I seem to have a double iCloud sync going as I have two of everything in my Notes. When I try to delete one copy, they both disappear. Any suggestions would be gratefully received. Thanks
Hi Winston
Further to the above I have now discovered that I have two iCloud accounts in my notes so there are two icloud folders !!
If I delete one, then all the notes are deleted from the other one. If I move all the notes from one into the other then the empty one is populated with two of everything !!
Dont want to uncheck Notes in iCloud as there is a drop down box that advises that all notes will be removed from my Mac if I take that action
Not sure what to do now !! -
Help!! Why is there a black part in the X when I try to delete my app? It's covering up the supposed to be white space around the X button
Try:
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since they all line up on the left site that could be a hardware problem or maybe a software glitch. I have never seen that problem posterd here before -
SIGILL 4 (*) illegal instruction (not reset when caught)
I'm getting the follwoing exception when running the java program in Unix machine. Does anyone have any solution for this problem.
SIGILL 4 (*) illegal instruction (not reset when caught)
si_signo [4]: SIGILL: (*) illegal instruction (not reset when caught)
si_errno [0]: Error 0
si_code [30]: ILL_ILLOPC [addr: 0x34F2A1F8]
Thanks!!!Appreciate your help on this.What exactly do you expect the readers of this forum to do for you? You think we all have debug VMs with Sun and IBM sources, hours of free time, and a copy of your application to debug this for you? You have given so few details that the mind boggles. Not even the OS you're running on. From the "circumstantial evidence", I'm assuming it's AIX.
("Help - my <something> is crashing. Please do something!" (wring hands) (silence) "Do something, guys!" (wring hands, weep) (silence!))
If you have a VM crash issue (as you seem to), your only real recourse is to contact IBM support and pay what they ask for their help. Or take blind stabs at the problem, using reasonable steps like:
* Install the latest VM and software updates (and gosh, you're running an ancient JDK with an ancient WebSphere - at least make sure you install all the APARs that IBM recommends (for AIX, the JDK and WebSphere).
* Try to narrow down the call that causes it to bomb, and do "something different".
And finally, if nothing else works,
* Pay IBM to solve the problem for you. -
Custom fields in migo table control not updating
hi ,
This is to have your valuable suggestion , wrt , following issue..
In transaction MIGO , i have to add two fields uebto and untto in table control .
I am able to add them in table control, but some how not able to pick data for these fields .
error coming is :
" System error: Incorrect Customizing for field
ZZUEBTO".
if any face such type of issue , answer me .
Thanx,
jeetHi,
Thanks for your reply. I have added the custom fields in the item detail. But the customer wants the custom fields in the table view also.
Is there any screen exit available to modify the table control of MIGO?
Thanks. -
Delete L.H.S spaces from field in database table but not for Report
Dear Experts
I m facing a problem...actaually i have replaced 999 by blank in a field of database table record.
Like : 999 abcde
999999 hjklmn
9999 klplmj
99999 hjsfhh
I have replaced 9 by blank. and using CONDENSE statement i have avoid the left hand side spaces of 9 in the database table.
Means the data is updated in database table following below using Condense.
Like: abcde
hjklmn
klplmj
hjsfhh
Now, the problem is that these spaces is showing in the Report. The left hand side spaces is not deleting from the Report. But these spaces is not showing in the databse table.
Plz tell me wat is the reason and wat is the solution to avoid these space from the Report.
Note: That field is Character Field. KNA1-STRAS
Thanks and Regards,
SwapnikaHello
Try to use
SHIFT c LEFT DELETING LEADING SPACE.
instead of
CONDENSE... -
Field in the table but not in the datasource
I have a datasource 0co_pc_act_05 based on mbew table . I need a field from that table , which is not present in the datasource , what should i do .?
How can i get the field from the table into the datasource?
Thankshi Mike,
try following steps
- in r/3 transaction rsa6 choose the datasource, click enhance strucutre, then append structure, system will propose z..., confirm it, in the next screen, type in the field name e.g abcd
- activate the append structure
- back to rsa6 choose the datasource, click edit, remove mark in column 'hidden' field for that field, save the datasource.
- in this case you no need to do user exit since that field exist in the origin table where the data extracted.
- recheck with rsa3
later in bw side
- create new infoobject, then right click the datasource and 'replicate datasource', change transfer rules, move the new field from right side to left (to be included in transfer structure), then assign the field by type in the new created infoobject name, activate the transfer rules. include also this new object in infocube etc.
hope this helps. -
Field catalog & internal table are not mutually convertible
Hi friends,
please help me for this problem, actually i m trying to display three alv reports from the three buttond i have given on my first basic report. its working fine till first & getting the data into the internal table for the second also. but when coming to the field catalog for the second report its giving syntax error as my "field catalog and internal table are not mutually convertible'".i have tried by giving different fieldcatalog also but its giving the same problem.please help for this & try to give an example if u can. Thanks a lot.
Regards
PankajThis is my code :
TABLES: PLAF,
MARA,
MAKT,
AFPO,
T023T,
VSAUFK,
T006A,
MBEW,
ZCDR_D.
Type Pools for ALV *************************
TYPE-POOLS: SLIS,
ABAP.
KKBLO.
DATA DECLARATION. ****************************
DATA: FLAG TYPE I,
FLAG1 TYPE I,
FLAG2 TYPE I,
FLAG3 TYPE I,
FLAG4 TYPE I,
FLAG5 TYPE I.
********Declaration for field catalog
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV,
WA_SUBT LIKE SLIS_EV_SUBTOTAL_TEXT,
IT_EVENTS TYPE TABLE OF slis_alv_event WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
LAYOUT1 TYPE SLIS_LAYOUT_ALV,
IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV,
WA_SUBT LIKE SLIS_EV_SUBTOTAL_TEXT,
IT_EVENTS TYPE TABLE OF slis_alv_event WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
WA_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV,
LAYOUT2 TYPE SLIS_LAYOUT_ALV,
IT_FIELDCAT2 TYPE SLIS_T_FIELDCAT_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV,
WA_SUBT LIKE SLIS_EV_SUBTOTAL_TEXT,
IT_EVENTS TYPE TABLE OF slis_alv_event WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
WA_FIELDCAT2 TYPE SLIS_FIELDCAT_ALV,
LAYOUT3 TYPE SLIS_LAYOUT_ALV,
IT_FIELDCAT3 TYPE SLIS_T_FIELDCAT_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV,
WA_SUBT LIKE SLIS_EV_SUBTOTAL_TEXT,
IT_EVENTS TYPE TABLE OF slis_alv_event WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
WA_FIELDCAT3 TYPE SLIS_FIELDCAT_ALV.
TYPES DECLARATION. ****************************
TYPES: BEGIN OF TY_MARA,
MATNR LIKE MARA-MATNR, " Material Number
MATKL LIKE MARA-MATKL, " Material Group
END OF TY_MARA.
TYPES: BEGIN OF TY_PLAF,
PERTR LIKE PLAF-PERTR, " Date
PLNUM LIKE PLAF-PLNUM, " Planned Order Number
MATNR LIKE PLAF-MATNR, " Material number
PLWRK LIKE PLAF-PLWRK, " Plant
KDAUF LIKE PLAF-KDAUF, " Sales Order Number
KDPOS LIKE PLAF-KDPOS, " SO Line Item
END OF TY_PLAF.
TYPES: BEGIN OF TY_MAKT,
MATNR LIKE PLAF-MATNR, " Material Number
MAKTX LIKE MAKT-MAKTX, " Material Description
END OF TY_MAKT.
TYPES: BEGIN OF TY_AFPO,
PLNUM LIKE AFPO-PLNUM, " Planned Order Number
MATNR LIKE AFPO-MATNR, " Material Number
KDAUF LIKE AFPO-KDAUF, " Sales Order Number
KDPOS LIKE AFPO-KDPOS, " SO Line Item
AUFNR LIKE AFPO-AUFNR, " Production Order
STRMP LIKE AFPO-STRMP,
DWERK LIKE AFPO-DWERK,
END OF TY_AFPO.
TYPES: BEGIN OF TY_ZCDR_D,
MANDT LIKE ZCDR_D-MANDT, " Client
CBNO LIKE ZCDR_D-CBNO, " Customs Book Number
PLNUM LIKE ZCDR_D-PLNUM, " Planned Order Number
MATNR LIKE ZCDR_D-MATNR, " Material Number
MAKTX LIKE ZCDR_D-MAKTX, " Material Description
KDAUF like ZCDR_D-KDAUF, " Sales Order Number
KDPOS like ZCDR_D-KDPOS, " SO Line Item
AUFNR LIKE ZCDR_D-AUFNR, " Production Order
END OF TY_ZCDR_D.
TYPES: BEGIN OF TY_VSAUFK,
INACT LIKE VSAUFK-INACT, " Status Indicator
END OF TY_VSAUFK.
TYPES: BEGIN OF TY_PLAF_MAKT,
CBNO LIKE ZCDR_D-CBNO, " Customs Book Number
PLNUM LIKE PLAF-PLNUM, " Planned Order Number
CHK TYPE C, " Check Box
MATNR LIKE PLAF-MATNR, " Material Number
MAKTX LIKE MAKT-MAKTX, " Material Description
KDAUF LIKE PLAF-KDAUF, " Sales Order Number
KDPOS LIKE PLAF-KDPOS, " SO Line Item
AUFNR LIKE AFPO-AUFNR, " Production Order
END OF TY_PLAF_MAKT.
TYPES: BEGIN OF TY_HELP_ITEM,
CBNO TYPE ZCDR_D-CBNO, " Customs Book Number
PLNUM LIKE ZCDR_D-PLNUM, " Planned Order Number
MATNR LIKE ZCDR_D-MATNR, " Material Number
MAKTX LIKE ZCDR_D-MAKTX, " Material Description
KDAUF LIKE ZCDR_D-KDAUF, " Sales Order Number
KDPOS LIKE ZCDR_D-KDPOS, " SO Line Item
AUFNR LIKE ZCDR_D-AUFNR, " Production Order
END OF TY_HELP_ITEM.
WORK AREA ******************************
DATA: WA_MARA TYPE TY_MARA,
WA_PLAF TYPE TY_PLAF,
WA_MAKT TYPE TY_MAKT,
WA_AFPO TYPE TY_AFPO,
WA_ZCDR_D TYPE TY_ZCDR_D,
WA_VSAUFK TYPE TY_VSAUFK,
WA_PLAF_MAKT TYPE TY_PLAF_MAKT,
WA_HELP_ITEM TYPE TY_HELP_ITEM.
INTERNAL TABLES ****************************
DATA: IT_MARA TYPE TABLE OF TY_MARA,
IT_PLAF TYPE TABLE OF TY_PLAF,
IT_MAKT TYPE TABLE OF TY_MAKT,
IT_AFPO TYPE TABLE OF TY_AFPO,
IT_ZCDR_D TYPE TABLE OF TY_ZCDR_D,
IT_VSAUFK TYPE TABLE OF TY_VSAUFK,
IT_PLAF_MAKT TYPE TABLE OF TY_PLAF_MAKT,
IT_HELP_ITEM TYPE TABLE OF TY_HELP_ITEM.
*it_events TYPE TABLE OF slis_alv_event WITH NON-UNIQUE DEFAULT KEY
*WITH HEADER LINE INITIAL SIZE 0.
TYPES: BEGIN OF TY_BOM,
MATMK LIKE STPOX-MATMK,
MTNRV LIKE ZCDR_D-MATNR,
IDNRK LIKE STPOX-IDNRK,
MNGLG LIKE STPOX-MNGLG,
MMEIN LIKE STPOX-MMEIN,
VPRSV LIKE STPOX-VPRSV,
UPRICE LIKE MBEW-STPRS,
TPRICE LIKE MBEW-STPRS,
END OF TY_BOM,
BEGIN OF TY_QUAN,
MATMK LIKE STPOX-MATMK,
MTNRV LIKE ZCDR_D-MATNR,
IDNRK LIKE STPOX-IDNRK,
MNGLG LIKE STPOX-MNGLG,
MMEIN LIKE STPOX-MMEIN,
UPRICE LIKE MBEW-STPRS,
TPRICE LIKE MBEW-STPRS,
END OF TY_QUAN,
BEGIN OF TY_T023T,
MATKL LIKE T023T-MATKL,
WGBEZ LIKE T023T-WGBEZ,
END OF TY_T023T,
BEGIN OF TY_T006A,
MMEIN LIKE T006A-MSEHI,
MSEHT LIKE T006A-MSEHT,
END OF TY_T006A,
BEGIN OF TY_IMP_FINAL,
SNO TYPE SY-INDEX,
HSCODE LIKE ZHSCODE-HSCODE,
WGBEZ TYPE T023T-WGBEZ,
SPEC(20) TYPE C,
MNGLG LIKE STPOX-MNGLG,
MSEHT LIKE T006A-MSEHT,
CNTRY(13) TYPE C,
UPRICE TYPE P LENGTH 16 DECIMALS 2,
TPRICE TYPE P LENGTH 16 DECIMALS 2,
CURRCODE TYPE C LENGTH 5,
END OF TY_IMP_FINAL,
BEGIN OF TY_MBEW,
MATNR LIKE MBEW-MATNR,
VPRSV LIKE MBEW-VPRSV,
STPRS LIKE MBEW-STPRS,
VERPR LIKE MBEW-VERPR,
END OF TY_MBEW.
DATA: WA_BOM TYPE TY_BOM,
WA_QUAN TYPE TY_QUAN,
WA_IMP_FINAL TYPE TY_IMP_FINAL,
WA_T023T TYPE TY_T023T,
WA_T006A TYPE TY_T006A,
WA_MBEW TYPE TY_MBEW.
DATA: IT_BOM TYPE TABLE OF TY_BOM,
IT_QUAN TYPE TABLE OF TY_QUAN,
IT_IMP_FINAL TYPE TABLE OF TY_IMP_FINAL,
IT_MBEW TYPE TABLE OF TY_MBEW.
SELECTION-SCREEN **************************
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE TEXT-001.
PARAMETERS : PR_CBNO LIKE ZCDR_D-CBNO OBLIGATORY. "Customs Book number
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION **************************
INITIALIZATION.
**PERFORM CLEAR_DATA.
**CLEAR: wa_layout.
*PERFORM set_events USING it_events[].
SELECT OPTION ****************************************
SELECTION-SCREEN : BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-002.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS:
SO_PERTR for PLAF-PERTR, "----
Date
SO_MATNR for MARA-MATNR, "----
Material
SO_MATKL for MARA-MATKL, "----
Material Group
SO_PLWRK for PLAF-PLWRK OBLIGATORY, "----
Plant
SO_KDAUF for PLAF-KDAUF. "----
Sales Order
SELECTION-SCREEN : END OF BLOCK BLK.
SELECTION SCREEN F4 HELP *********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PR_CBNO.
DATA: DYNFIELDS TYPE TABLE OF DYNPREAD WITH HEADER LINE.
DYNFIELDS-FIELDNAME = PR_CBNO.
APPEND DYNFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
REQUEST = ' '
PERFORM_CONVERSION_EXITS = ' '
PERFORM_INPUT_CONVERSION = ' '
DETERMINE_LOOP_INDEX = ' '
START_SEARCH_IN_CURRENT_SCREEN = ' '
START_SEARCH_IN_MAIN_SCREEN = ' '
START_SEARCH_IN_STACKED_SCREEN = ' '
START_SEARCH_ON_SCR_STACKPOS = ' '
SEARCH_OWN_SUBSCREENS_FIRST = ' '
SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
DYNPFIELDS = DYNFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
INVALID_PARAMETER = 7
UNDEFIND_ERROR = 8
DOUBLE_CONVERSION = 9
STEPL_NOT_FOUND = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE DYNFIELDS WITH KEY FIELDNAME = 'CBNO'.
PR_CBNO = DYNFIELDS-FIELDVALUE.
SELECT
CBNO
PLNUM
MATNR
MAKTX
KDAUF
KDPOS
AUFNR
FROM ZCDR_D
INTO TABLE IT_HELP_ITEM .
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'CBNO'
PVALKEY = ' '
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'PR_CBNO'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_HELP_ITEM
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
***********************SELECTION SCREEN VALIDATION.*******************
AT SELECTION-SCREEN ON PR_CBNO.
SELECT SINGLE *
FROM ZCDR_D
WHERE CBNO = PR_CBNO.
IF SY-SUBRC EQ 0.
MESSAGE E000(ZCBR) WITH PR_CBNO.
ENDIF.
AT SELECTION-SCREEN ON SO_PERTR.
IF SO_PERTR IS NOT INITIAL.
SELECT SINGLE *
FROM PLAF
WHERE PERTR IN SO_PERTR.
IF SY-SUBRC NE 0.
MESSAGE W001(ZCBR) WITH SO_PERTR-LOW.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON SO_MATNR.
IF SO_MATNR IS NOT INITIAL.
SELECT SINGLE *
FROM MARA
WHERE MATNR IN SO_MATNR.
IF SY-SUBRC NE 0.
MESSAGE W002(ZCBR) WITH SO_MATNR-LOW.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON SO_MATKL.
IF SO_MATKL IS NOT INITIAL.
SELECT SINGLE *
FROM MARA
WHERE MATKL IN SO_MATKL.
IF SY-SUBRC NE 0.
MESSAGE W003(ZCBR) WITH SO_MATKL-LOW.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON SO_PLWRK.
IF SO_PLWRK IS NOT INITIAL.
SELECT SINGLE * FROM PLAF
WHERE PLWRK IN SO_PLWRK.
IF SY-SUBRC NE 0.
MESSAGE W004(ZCBR) WITH SO_PLWRK-LOW.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON SO_KDAUF.
IF SO_KDAUF IS NOT INITIAL.
SELECT SINGLE * FROM PLAF
WHERE KDAUF IN SO_KDAUF.
IF SY-SUBRC NE 0.
MESSAGE W005(ZCBR) WITH SO_KDAUF-LOW.
ENDIF.
ENDIF.
*********************START-OF-SELECTION.*****************************
START-OF-SELECTION.
IF so_pertr IS NOT INITIAL.
FLAG = 1.
ENDIF.
IF SO_MATNR IS NOT INITIAL.
FLAG1 = 1.
ENDIF.
IF so_matkl IS NOT INITIAL.
FLAG2 = 1.
ENDIF.
IF so_plwrk IS NOT INITIAL.
FLAG3 = 1.
ENDIF.
IF so_kdauf IS NOT INITIAL.
FLAG4 = 1.
ENDIF.
Select data into its internal table from different database tables
SELECT
MATNR
MATKL
MTART
INTO CORRESPONDING FIELDS OF TABLE IT_MARA
FROM MARA
WHERE MTART = 'ZFGS'.
IF FLAG2 NE 0.
DELETE IT_MARA WHERE
NOT ( MATKL IN SO_MATKL )
ENDIF.
IF FLAG1 NE 0.
DELETE IT_MARA WHERE
NOT ( MATNR IN SO_MATNR )
ENDIF.
SELECT
PERTR
PLNUM
MATNR
PLWRK
KDAUF
KDPOS
FROM PLAF
INTO CORRESPONDING FIELDS OF TABLE IT_PLAF
FOR ALL ENTRIES IN IT_MARA
WHERE PLWRK IN SO_PLWRK
AND MATNR = IT_MARA-MATNR.
SELECT
MATNR
PLNUM
AUFNR
KDAUF
KDPOS
STRMP
DWERK
INACT
FROM AFPO
INTO CORRESPONDING FIELDS OF TABLE IT_AFPO
FOR ALL ENTRIES IN IT_MARA
WHERE DWERK IN SO_PLWRK
AND MATNR = IT_MARA-MATNR.
WHERE MATNR = IT_MARA-MATNR
AND STRMP = IT_PLAF-PERTR
AND KDAUF = IT_PLAF-KDAUF
AND DWERK = IT_PLAF-PLWRK.
End of Data selection
Keep only those records which the user wants from his selection screen
IF FLAG NE 0.
DELETE IT_PLAF WHERE
NOT ( PERTR IN SO_PERTR )
DELETE IT_AFPO WHERE
NOT ( STRMP IN SO_PERTR )
ENDIF.
IF FLAG3 NE 0.
DELETE IT_PLAF WHERE
NOT ( PLWRK IN SO_PLWRK )
DELETE IT_AFPO WHERE
NOT ( DWERK IN SO_PLWRK )
ENDIF.
IF FLAG4 NE 0.
DELETE IT_PLAF WHERE
NOT ( KDAUF IN SO_KDAUF )
DELETE IT_AFPO WHERE
NOT ( KDAUF IN SO_KDAUF )
ENDIF.
SELECT
MATNR
MAKTX
FROM MAKT
INTO CORRESPONDING FIELDS OF TABLE IT_MAKT
FOR ALL ENTRIES IN IT_PLAF
WHERE MATNR = IT_PLAF-MATNR
AND SPRAS = 'EN'.
SELECT
FROM ZCDR_D
INTO TABLE IT_ZCDR_D.
Put data into final internal table from different internal tables
LOOP AT IT_MARA INTO WA_MARA.
LOOP AT IT_PLAF INTO WA_PLAF WHERE MATNR = WA_MARA-MATNR.
READ TABLE IT_ZCDR_D
INTO WA_ZCDR_D
WITH KEY PLNUM = WA_PLAF-PLNUM.
IF SY-SUBRC <> 0.
MOVE WA_PLAF-PLNUM TO WA_PLAF_MAKT-PLNUM.
MOVE WA_PLAF-MATNR TO WA_PLAF_MAKT-MATNR.
MOVE WA_PLAF-KDAUF TO WA_PLAF_MAKT-KDAUF.
MOVE WA_PLAF-KDPOS TO WA_PLAF_MAKT-KDPOS.
READ TABLE IT_AFPO INTO WA_AFPO WITH KEY PLNUM = WA_PLAF-PLNUM.
MOVE WA_AFPO-AUFNR TO WA_PLAF_MAKT-AUFNR.
SELECT
SINGLE * FROM VSAUFK
INTO TABLE IT_VSAUFK
WHERE AUFNR = WA_AFPO-AUFNR
AND STAT = 'I0012'.
IF SY-SUBRC <> 0.
MOVE WA_AFPO-AUFNR TO IT_PLAF_MAKT-AUFNR.
ELSE.
CHECK IT_VSAUFK-INACT = 'X'.
MOVE WA_AFPO-AUFNR TO IT_PLAF_MAKT-AUFNR.
ENDIF.
ENDLOOP.
READ TABLE IT_MAKT
INTO WA_MAKT
WITH KEY MATNR = WA_MARA-MATNR.
MOVE WA_MAKT-MAKTX TO WA_PLAF_MAKT-MAKTX.
APPEND WA_PLAF_MAKT TO IT_PLAF_MAKT.
CLEAR WA_PLAF_MAKT.
ENDIF.
ENDLOOP.
ENDLOOP.
LOOP AT IT_PLAF_MAKT .
LOOP AT IT_MARA INTO WA_MARA.
LOOP AT IT_PLAF INTO WA_PLAF WHERE MATNR = WA_MARA-MATNR.
LOOP AT IT_AFPO INTO WA_AFPO WHERE MATNR = WA_MARA-MATNR.
READ TABLE IT_ZCDR_D
INTO WA_ZCDR_D
WITH KEY PLNUM = WA_AFPO-PLNUM.
IF SY-SUBRC <> 0.
LOOP AT IT_AFPO INTO WA_AFPO.
WHERE MATNR IN SO_MATNR
AND STRMP = SO_PERTR
AND PLNUM IN SO_PLNUM
AND KDAUF IN SO_-KDAUF
AND MATKL IN SO_MATKL.
SELECT
SINGLE INACT FROM VSAUFK
INTO WA_VSAUFK
WHERE AUFNR = WA_AFPO-AUFNR
AND STAT = 'I0012'.
IF SY-SUBRC <> 0.
WA_PLAF_MAKT-PLNUM = WA_AFPO-PLNUM.
WA_PLAF_MAKT-KDAUF = WA_AFPO-KDAUF.
WA_PLAF_MAKT-KDPOS = WA_AFPO-KDPOS.
WA_PLAF_MAKT-MATNR = WA_AFPO-MATNR.
WA_PLAF_MAKT-AUFNR = WA_AFPO-AUFNR.
READ TABLE IT_MAKT INTO WA_MAKT WITH KEY MATNR = WA_AFPO-MATNR.
WA_PLAF_MAKT-MAKTX = WA_MAKT-MAKTX.
APPEND WA_PLAF_MAKT TO IT_PLAF_MAKT .
APPEND WA_AFPO TO IT_PLAF_MAKT.
MOVE WA_AFPO-AUFNR TO IT_PLAF_MAKT-AUFNR.
ELSE.
CHECK WA_VSAUFK-INACT = 'X'.
WA_PLAF_MAKT-PLNUM = WA_AFPO-PLNUM.
WA_PLAF_MAKT-KDAUF = WA_AFPO-KDAUF.
WA_PLAF_MAKT-KDPOS = WA_AFPO-KDPOS.
WA_PLAF_MAKT-MATNR = WA_AFPO-MATNR.
WA_PLAF_MAKT-AUFNR = WA_AFPO-AUFNR.
READ TABLE IT_MAKT INTO WA_MAKT WITH KEY MATNR = WA_AFPO-MATNR.
WA_PLAF_MAKT-MAKTX = WA_MAKT-MAKTX.
APPEND WA_PLAF_MAKT TO IT_PLAF_MAKT .
APPEND WA_AFPO TO IT_PLAF_MAKT.
MOVE WA_AFPO-AUFNR TO IT_PLAF_MAKT-AUFNR.
ENDIF.
ENDIF.
ENDLOOP.
EXIT.
ENDIF.
ENDLOOP.
ENDLOOP.
LOOP AT IT_PLAF_MAKT INTO WA_PLAF_MAKT.
WA_PLAF_MAKT-CBNO = PR_CBNO.
MODIFY IT_PLAF_MAKT FROM WA_PLAF_MAKT TRANSPORTING CBNO.
ENDLOOP.
ENDLOOP.
PERFORM CHANGE_CATALOG.
PERFORM ALV_DISPLAY.
*& Form CHANGE_CATALOG
text
FORM CHANGE_CATALOG.
LAYOUT-ZEBRA = 'X'.
DATA: L_POS TYPE I.
L_POS = L_POS + 1.
WA_FIELDCAT-col_pos = L_POS.
WA_FIELDCAT-SELTEXT_M = 'Planned Order Nos.'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'PLNUM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-INPUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'Check Box'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-CHECKBOX = 'X'.
WA_FIELDCAT-EDIT = abap_true.
WA_FIELDCAT-FIELDNAME = 'CHK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-OUTPUTLEN = '12'.
WA_FIELDCAT-SELTEXT_M = 'Material'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-OUTPUTLEN = '35'.
WA_FIELDCAT-SELTEXT_M = 'Material Description'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'MAKTX'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-SELTEXT_M = 'Sales Order Number'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'KDAUF'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-SELTEXT_M = 'S O Line Item'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'KDPOS'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-OUTPUTLEN = '13'.
WA_FIELDCAT-SELTEXT_M = 'Production Order'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'AUFNR'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
*GS_LAYOUT-TOTALS_BEFORE_ITEMS = 'X'.
*data : text like slis_ev_subtotal_text value 'total'.
*gs_layout-subtotals_text = text.
*gs_layout-totals_only = 'X'.
gs_layout-subtotals_text = 'total'.
endform. " CHANGE_CATALOG
*********************event*************************************
*& Form ALV_DISPLAY
text
FORM ALV_DISPLAY.
*data: LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = 'PLANNED ORDERS'
I_GRID_SETTINGS = LC_GLAY
IS_LAYOUT = LAYOUT
IT_FIELDCAT = IT_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'X'
IS_VARIANT =
IT_EVENTS = IT_EVENTS[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_IT_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_PLAF_MAKT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_FIELDCAT[].
ENDFORM. "ALV_DISPLAY
*& Form USER_COMMAND
text
-->UCOMM text
-->SELFIELD text
FORM USER_COMMAND
USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
Data: REF1 TYPE REF TO CL_GUI_ALV_GRID.
DATA WA LIKE LINE OF IT_PLAF_MAKT.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF1.
CALL METHOD REF1->CHECK_CHANGED_DATA.
CASE UCOMM.
WHEN '&BACK'.
LEAVE TO SCREEN 0.
WHEN '&EXIT'.
LEAVE TO SCREEN 0.
WHEN '&CANC'.
LEAVE TO SCREEN 0.
WHEN '&SAVE'.
CLEAR IT_ZCDR_D[].
LOOP AT IT_PLAF_MAKT INTO WA_PLAF_MAKT WHERE CHK = 'X'.
CLEAR WA_ZCDR_D.
WA_ZCDR_D-MANDT = SY-MANDT.
WA_ZCDR_D-CBNO = WA_PLAF_MAKT-CBNO.
WA_ZCDR_D-plnum = WA_PLAF_MAKT-PLNUM.
WA_ZCDR_D-MATNR = WA_PLAF_MAKT-MATNR.
WA_ZCDR_D-MAKTX = WA_PLAF_MAKT-MAKTX.
WA_ZCDR_D-KDAUF = WA_PLAF_MAKT-KDAUF.
WA_ZCDR_D-KDPOS = WA_PLAF_MAKT-KDPOS.
WA_ZCDR_D-AUFNR = WA_PLAF_MAKT-AUFNR.
APPEND WA_ZCDR_D to IT_ZCDR_D.
ENDLOOP.
LOOP AT IT_ZCDR_D INTO WA_ZCDR_D.
INSERT ZCDR_D FROM WA_ZCDR_D.
CLEAR WA_ZCDR_D.
ENDLOOP.
IF SY-SUBRC EQ 0.
MESSAGE S021(ZCBR) WITH PR_CBNO.
ENDIF.
IF IT_ZCDR_D IS INITIAL.
MESSAGE 'Select Atleast one Check Box' TYPE 'E' .
ENDIF.
WHEN 'IMPORT_INF'.
PERFORM IMPORT_REPORT.
WHEN 'EXPORT_INF'.
PERFORM EXPORT_REPORT.
WHEN 'UNIT_CONSU'.
PERFORM UNIT_CONSUMPTION.
ENDCASE.
ENDFORM. "USER_COMMAND
FORM set_events USING it_events TYPE slis_t_event.
DATA: x_event TYPE slis_alv_event.
clear x_event.
x_event-name = 'USER_COMMAND'.
x_event-form = 'USER_COMMAND'.
append x_event to it_events.
CLEAR x_event.
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = IT_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table it_events into x_event with key name = slis_ev_user_command.
if sy-subrc = 0.
x_event-form = 'USER_COMMAND'.
modify it_events from x_event index sy-tabix transporting form .
endif.
ENDFORM.
*& Form set_pf_status
text
-->RT_EXTAB text
FORM SET_PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z_PFSTAT'.
ENDFORM. " set_pf_status
FORM IMPORT_REPORT.
TYPES: BEGIN OF TY_BOM,
MATMK LIKE STPOX-MATMK,
MTNRV LIKE ZCDR_D-MATNR,
IDNRK LIKE STPOX-IDNRK,
MNGLG LIKE STPOX-MNGLG,
MMEIN LIKE STPOX-MMEIN,
VPRSV LIKE STPOX-VPRSV,
UPRICE LIKE MBEW-STPRS,
TPRICE LIKE MBEW-STPRS,
END OF TY_BOM,
BEGIN OF TY_QUAN,
MATMK LIKE STPOX-MATMK,
MTNRV LIKE ZCDR_D-MATNR,
IDNRK LIKE STPOX-IDNRK,
MNGLG LIKE STPOX-MNGLG,
MMEIN LIKE STPOX-MMEIN,
UPRICE LIKE MBEW-STPRS,
TPRICE LIKE MBEW-STPRS,
END OF TY_QUAN,
BEGIN OF TY_T023T,
MATKL LIKE T023T-MATKL,
WGBEZ LIKE T023T-WGBEZ,
END OF TY_T023T,
BEGIN OF TY_T006A,
MMEIN LIKE T006A-MSEHI,
MSEHT LIKE T006A-MSEHT,
END OF TY_T006A,
BEGIN OF TY_IMP_FINAL,
SNO TYPE SY-INDEX,
HSCODE LIKE ZHSCODE-HSCODE,
WGBEZ TYPE T023T-WGBEZ,
SPEC(20) TYPE C,
MNGLG LIKE STPOX-MNGLG,
MSEHT LIKE T006A-MSEHT,
CNTRY(13) TYPE C,
UPRICE TYPE P LENGTH 16 DECIMALS 2,
TPRICE TYPE P LENGTH 16 DECIMALS 2,
CURRCODE TYPE C LENGTH 5,
END OF TY_IMP_FINAL,
BEGIN OF TY_MBEW,
MATNR LIKE MBEW-MATNR,
VPRSV LIKE MBEW-VPRSV,
STPRS LIKE MBEW-STPRS,
VERPR LIKE MBEW-VERPR,
END OF TY_MBEW.
DATA: WA_BOM TYPE TY_BOM,
WA_QUAN TYPE TY_QUAN,
WA_IMP_FINAL TYPE TY_IMP_FINAL,
WA_T023T TYPE TY_T023T,
WA_T006A TYPE TY_T006A,
WA_MBEW TYPE TY_MBEW.
DATA: IT_BOM TYPE TABLE OF TY_BOM,
IT_QUAN TYPE TABLE OF TY_QUAN,
IT_IMP_FINAL TYPE TABLE OF TY_IMP_FINAL,
IT_MBEW TYPE TABLE OF TY_MBEW.
DATA: IT_STPO TYPE STANDARD TABLE OF STPOX,
WA_STPO TYPE STPOX.
SELECT
MATNR
VPRSV
STPRS
VERPR
FROM MBEW
INTO CORRESPONDING FIELDS OF TABLE IT_MBEW.
WHERE MATNR EQ IT_MARA-MATNR. "MBEW
*I_STPO2 TYPE STANDARD TABLE OF STPOX.
LOOP AT IT_PLAF_MAKT INTO WA_PLAF_MAKT WHERE CHK = 'X'.
LOOP AT IT_ZCDR_D INTO WA_ZCDR_D .
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2' -
Why is this table trigger not firing when insert/update from servlet?
Hi!
I have this servlet that parses XML and stores values into Oracle tables. I have created a table trigger so that when one table is updated, a trigger is fired and the current system date is store in another table's field.
I have tested the trigger in Toad and it works, that is, if I update the table that the trigger is set to, the SYSDATE is stored as intended.
Here is the trigger's code:
DECLARE
tmpVar NUMBER;
NAME: transaction_time
PURPOSE:
REVISIONS:
Ver Date Author Description
1.0 9/14/2007 1. Created this trigger.
NOTES:
Automatically available Auto Replace Keywords:
Object Name: transaction_time
Sysdate: 9/14/2007
Date and Time: 9/14/2007, 8:00:42 AM, and 9/14/2007 8:00:42 AM
Username: (set in TOAD Options, Proc Templates)
Table Name: MS_RESLIMITS (set in the "New PL/SQL Object" dialog)
Trigger Options: (set in the "New PL/SQL Object" dialog)
BEGIN
tmpVar := 0;
UPDATE MS_Misc SET mi_lastrun = SYSDATE;
EXCEPTION
WHEN OTHERS THEN
-- Consider logging the error and then re-raise
RAISE;
END transaction_time;
Now, when the table is updated by the servlet, the trigger does not fire. And here is the code from the servlet:
--- <start of code> ---
boolean recordExists =
this.isRecordPresent("MS_ResLimits", "rl_compcode",
compCode, url);
Connection rlConn = null;
try {
Class.forName("oracle.jdbc.driver.OracleDriver");
rlConn = DriverManager.getConnection(url, dbUser,
dbPwd);
Statement stmt = rlConn.createStatement();
PreparedStatement xmlUpdate = null;
if (recordExists) {
xmlUpdate =
rlConn.prepareStatement("UPDATE MS_ResLimits SET rl_compcode = ?, rl_maxreslimit= ? WHERE rl_compcode =?");
xmlUpdate.setString(1, compCode);
xmlUpdate.setString(2, maximumReservationDate);
xmlUpdate.setString(3, compCode);
} else {
xmlUpdate =
rlConn.prepareStatement("INSERT INTO MS_ResLimits VALUES(?,?)");
xmlUpdate.setString(1, compCode);
xmlUpdate.setString(2, maximumReservationDate);
} //end-if-else
int n = xmlUpdate.executeUpdate();
rlConn.commit();
} catch (Exception ex) {
out.println(ex.toString() +
"-> error inserting Max Reservation Date<br>");
} finally {
if (rlConn != null) {
rlConn.close();
} //end-try-catch-finally
--- <end of code> ---
What causes the trigger to fire? the commit? My understanding is that executeUpdates are in autocommit mode by default, or am I mistaken? Do I have to programmatically send something to the DB so that the trigger fires?
BTW, I'm using JDeveloper 10.1.3.3.0. The project is being compiled with Java 1.5.0_06. The servlet is running in OCJ4 standalone. DB is 10g (don't know the release version).
...and, for some reason this message is not keeping format from my edit window to the post...
Thx!
Message was edited by:
delphosbean
Message was edited by:
delphosbean
Message was edited by:
delphosbeanYou are supposed to be able to preserve you formatting using the <pre></pre> tags but I can't get this to work either<br>
<br>
Patrick. -
Tables do not import when importing from 10gR2 to 9iR2
Hello forum members
I take full database dump from 10g database as below:
C:\Documents and Settings\Vugar>exp
Export: Release 9.2.0.1.0 - Production on Thu Aug 6 19:05:47 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: sys/sys_pass@prod as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Enter array fetch buffer size: 4096 >
Export file: EXPDAT.DMP > c:\full6.dmp
(1)E(ntire database), (2)U(sers), or (3)T(ables): (2)U > E
Export grants (yes/no): yes >
Export table data (yes/no): yes >
Compress extents (yes/no): yes >
And import the dump file in 9i database as below:
C:\Documents and Settings\Vugar>imp
Import: Release 9.2.0.1.0 - Production on Thu Aug 6 19:08:18 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: sys/sys_pass as sysdba
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Import file: EXPDAT.DMP > c:\full6.dmp
Enter insert buffer size (minimum is 8192) 30720>
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
List contents of import file only (yes/no): no >
Ignore create error due to object existence (yes/no): no >
Import grants (yes/no): yes >
Import table data (yes/no): yes >
Import entire export file (yes/no): no > Y
Everything goes alright, all of the users and their grants created in the target database. But the tables and other objects of users do not create. After the full import I import every user with the from user to user clause. After that all of the objects create under each user. Can anyone tell me the reason of that, why the objects of users do not create when perfomin full import?? What is my mistake in full importing?
Thanks.Shafi Rasulov wrote:
Thanks for reply
Virendra, I exported from 10g with 9i exp utility, so 9i exp utility doesn't export incompatible objects from 10g, so it is possible full export import from 10g to 9i.
Anand, as you say, I exported/imported with 9i utility from 10g. In tha documentation and another tutorials I haven't seen any notification about missing table and another objects in the export/import.
Pavan, as you say there is several ways for migrating from 10g to 9i but I'm interested in why full export/import doesn't create tables and another objects when I do.
I say again, after I full import, I import each user with the FROM USER TO USER statement and all of the objects are created under relevant user. I want to learn the reason why the tables and another objects are not created in full import??I don't have 9i database with me to check what is happening but there should not be any error if you have used proper binary of the right version to do the export. What are those "incompatible objects" that you are talking about which are not exported/imported? You don't need to use from user/to user, if you are going to mention a 10g schema and Full=y , your import would work properly.
HTH
Aman.... -
'table does not exist' when creating generic datasource
I went to SBIW->Business Content DataSources->Transfer Business Content DataSources-chose "content delta". it said 'comparison bct <-> cust version ' then it counted thru several objects for a few minutes and finished with no warnings.
then I selected each datasource under co-om-cca and activated those with no problems.
problem: now when i try to create came generic datasource using co-om-cca application component i get mssg when saving 'the specified table does not exist'...so now it isn't even letting me create a datasource at all using a standard application component either.
I have been having many problems with creating datasources and using application components and this is why I did the first paragraph because I don't know what else to try.
Please help, thanks.I have answered my own question. I wasn't entering the view/table and it was my own complete oversight.
-
Swing problem: table is not refreshed when i open it from jdialog
Hi , my situation is this one :
1. i have a swing form.
2. i have created a panel form where i have a drop down list and a table. wich are depndend with each other. When i choose an item to the drop down list the value in the table is changed.
3. i invoke this panel into the form with drag and drop, with invoke jDialog from button option.
4. First time i run the form and open the panel from button the drop down list and the table are working correctly.
5. i close the panel and open it again: And at this time when i choose an item from drop down list the table is not refreshed anymore. I have to run the form again if i want that this panel to work correctly.
Am i doing smth wrong? I dont have too much experience in swing , and the documentation for adf-swign are really poor .
Ps: Maybe i should explain the way i have created the drop down list and table in the panel . i am not using smth like execute with parameters for the view in the table. I have created a link between the view in the drop down list and the view in the table. It seems they work correcly if i run the panel for the first time.
Thanks in advance !To answer your question, Restore the iPhone with current iTunes on your computer. If fixed, it was software. If still problem, most likely hardware, and then make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.
Maybe you are looking for
-
Mail takes a long time to connect to outgoing server
This has been touched upon in a number of threads but I'll post my own particular version in case anyone can throw any light on it. When sending emails (Mail 3.6, OS10.5.8) it can take up to 1 minute for Mail to connect to the outgoing server. In the
-
I have an apple ID but should I set her up with a unique ID as well? And if so how do I link her to our iTunes library? Thanks
-
Authorized computer not showing-up in Managed Accounts in Itunes
I have just bought a macbook pro and want to see all my photos, music, apps etc from my other devises through icloud. It says i have 4 authorised devises (the macbook pro being the 4th) but, in managed devises it says i have 3. Any thoughts on how
-
I am running QuickTime 6.5.3 on OS 10.2.8. How can I upgrade to QuickTime Pro 6 without upgrading my operating system?
-
Please help!: adding second IP to NIC in windows to access remote DB
We have an old database server that has one last remaining connection to another database, and we need to get this connection working on our new server. There is an IP exception on the target database to allow connections from the IP of our old serve