Why quick drop don't pop out with CONTROL SPACE in Labview 2010

I get can quick drop out from the menu, but not from CONTROL + SPACE. 
What gives? Is there any setting to activate? Did you encounter this issue before?
I use Labview 2010, Windows 7, Acer laptop.  

The setting is at Ctrl+. But it's not working.
I change it to Ctrl+', and typing Ctrl and ' works. 
Well at least now I know how it works 

Similar Messages

  • Why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

    why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I've used firefox for a month now but recently if I type on facebook the quick find search bar pops out. Even if I press Esc, when i type on facebook again the quick find bar pops out again. pls help..

    I've used firefox for a month now but recently if I type on facebook the quick find search bar pops out. Even if I press Esc, when i type on facebook again the quick find bar pops out again. pls help..
    even when i click the register on the top right of mozilla it wont allow me to.

    I've used firefox for a month now but recently if I type on facebook the quick find search bar pops out. Even if I press Esc, when i type on facebook again the quick find bar pops out again. pls help..
    even when i click the register on the top right of mozilla it wont allow me to.

  • Why is my phone number greyed out with no check mark in Messages under Settings?

    Why is my phone number greyed out with no check mark in Messages under Settings?

    The number for the iPhone is grayed out but if no check mark under you can be reached by iMessage at, can you select the number below start new conversations from?

  • I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

    I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

    You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
    Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

  • Why does my tv screen black out with atv2?

    Does anyone know how to cure the screen on my tv blacking out with atv2? It occurs whether watching a movie from iTunes or Netflix, flicking through my iTunes library or when the photographs scroll when listening to music. I have latest software, tried resettting the atv and also changed the hdmi cable. Any help would be appreciated.

    I bought ATV last night and have the same issue.  Mine screen is up for no more than 60 seconds at a time so it really is useless.  I'm going to try different things today to see if I can figure it out, but no answers yet.

  • Why does my iPhone 6 pop up with this message?

    Hey so I got my new iPhone 6 in the mail yesturday and i'm having trouble actually getting the phone started. Whenever I try signing in to activate my phone it comes up with this message after i enter my billing zip code and my SSN. Verizon Wireless was unable to verify your identity using the information you entered. I do everything right but it won't let me activate my iPhone. I am using the same phone number as my previous phone. I've called apple and they hooked me up with a senior advisor then they hooked me up to verizon and they didn't help me at all. The SIM card is in the iPhone and my phone on verizon is already linked I just need to get the iPhone activated. Did anyone else have this similar problem? 

    Hi there J0SHH3SS,
    You may find the troubleshooting steps for activation issues in the article below helpful.
    Get help activating your iPhone 
    -Griff W. 

  • It seems that NI dropped the Activex Events from the Control Panel in LabVIEW 7.0. Why???

    I have Labview 6.0/6.1 Activex vi's that no longer work in LabView 7.0 There are no longer ActiveX Events vi's in the Communications->ActiveX control set. What is the deal with that??? Pretty much makes my $2400 upgrade investment worth nothing as far as I can see.

    kup,
    Are you sure that your VIs no longer work? They should. The support VIs are located in "vi.lib\Platform\ax-events.llb". The functionality was not taken away, the VIs were simply removed from the function palette. Also, ActiveX Events may now also be handled using calback VIs. This is much better, IMO. Seach the examples for "ActiveX" and "callback".
    -Jim

  • Why would firefox release version 29.0.1. It is terrible! I had to find a plugin to change the tabs back. Bad decision. Why was this done?

    Why would firefox release version 29.0.1. It is terrible! I had to find a plugin to change the tabs back. Bad decision. Why was this done?
    Not happy with version 29.0.1 - Are there any plans to roll this back?

    On my Windows 8 machine Firefox 29 (puke) no longer remembers my "Customize" icon settings ~ every time I close down Firefox and restart they all have disappeared. POS.
    Whomever approved this radical of a change on the user experience without a nary of warning should be TERMINATED. This will go down in software history's top ten "Hall-Of-Shame"!!!

  • Right arrow and number 9 keys popped out and inside plastic broken

    Hi,
    I own a HP Pavilion dv6 VX067AV laptop which is still under Accidental damage warranty.
    right arrow and number 9 keys popped out with broken plastic inside.
    Please suggest what i need to do to get it replaced. Thanks.
    -Buzzi

    What little there is in this topic: 9.0 iTunes played Football Podcast frame by frame both forward and backwards for detailed viewing. When they upgraded to 10.0 the keyboard freatured was changed and not replaced. the arrow keys now move you to the next video or the previous video. Command (open Appple) moves you ..like 3 to 4 frames ahead. This is stupid and I have to play my podcast videos in Realplayer to use their arrow keys. This is just one more level for playerts to scrfew up on when viewing themselves. THE Can someone actually ask Apple to put it back as a key board feature. It can not even be scripted, but I'm game to hear your advice.

  • IPhoto scrolls out of control

    I'm really getting #$%&* off at iPhoto. I'm organizing a semi large library of just over 1000 images in approximately 120 rolls. Here's the problem: when I drag and drop images from one roll to another, at some point which I can't exactly determine, iPhoto kicks into overdrive and scrolls so fast that I can't see the rolls. If I try to reverse (inevitable as it's impossible to stop where you want when iPhoto is in Warp speed), all the while still holding down the click button on my mouse, iPhoto goes in reverse just as fast. It's impossible to stop and drop the image where I want. What usually happens is I just drop it somewhere and then have to re drag and drop to the correct roll.
    Is there anyway of controlling the speed iPhoto scrolls at? When I first start dragging an image, iPhoto scrolls at an appropriate speed and slowly accelerates. Then, all of a sudden, like I said, it kicks in the afterburners and essentially becomes useless.
    Any help?

    TD.
    Thanks, that's a useful article. I'll check out the USB overdrive and see if it has some functions I'd like.
    But again, for me it's not a mouse issue. Unlike the article, I never have this problem outside of the library in iPhoto.
    It happened again yesterday, so let my try to describe it more carefully.
    I had just uploaded some pictures from a camera card into iPhoto. They were put in a new roll (as always). I wanted to move them up to an existing roll with pictures from the same card. I selected the new roll. Then I began to drag them up to the roll where I wanted them. I had perfect control with the mouse as I moved the drag image up the screen. But the target roll was above it, off screen. When I moved to the top where iPhoto begins to scroll the rolls downward, it was fine at first. I even am very careful to just let it scroll a little at a time, to keep it from accelerating (Notice that the mouse dosn't move much here, it's iPhoto moving the rolls to put them on screen.) I had no trouble getting my target roll onscreen, highlighting the roll name, and dropping in the first set of imports.
    But when I uploaded more pictures on another new roll and tried to move them, iPhoto freaked out. Again I selected the new roll and dragged it up to the top of the window. With the mouse just inside the top of the window, where it activates iPhoto to move the rolls down, I could see the open target roll approaching as rows of thumbnails lowered on the screen. BUT, when it got to where the roll name should have been, iPhoto moved into warp speed and skipped a whole screenful of rolls in a flash. The target roll was now off screen below the window. So I had to move the mouse down and let iPhoto begin scrolling the rolls up. Nice and slow, a few rolls at a time (I keep the rolls I'm not using closed.) Then JUMP - iPhoto goes into hyperspeed again and scrolls the rolls up so that the target roll is again off screen above the window. Again, I moved up to the top so iPhoto would scroll the rolls down. Back and forth, up and down, it kept flying past my target roll. With the target roll open, I could get the rows of thumbnails on screen nice and slow. But I have to reach that roll name, or my photos won't drop into the roll. It's the roll NAME that keeps getting flown past. (As if iPhoto is rejecting more changes to that roll.) If I close the target roll, I can't come within 2 or 3 rolls from it before iPhoto goes warp. Eventually I managed to get the target roll on screen while the mouse was at the top and iPhoto was scrolling down. It scrolled very quickly, but I managed to catch it before it moved off the bottom of the screen. Then I moved my mouse slowly down toward the target roll, one roll at a time (dragging all the while, never releasing) and was finally lucky enough to have the roll name of my target roll stay put and become highlighted. I dropped in the new roll, and it was correctly added to the target roll.
    The third time I uploaded and tried to move was even more difficult. It took even longer to catch the target roll on screen. Lots more up and down. All of my imports yesterday (3 newly created rolls) were placed into the same roll.
    Jailer Joe, is this what happens to you?
    Has anyone else seen or heard of this? Any thoughts as to why iPhoto's roll scrolling goes out of control?

  • Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tell me that the file is being used even when  it is not. How can I fix this issue?

    Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when  iall other programs are closed. How can I fix this issue?

    Thanks Jeff, I was not aware that a template could be multi-page.  (All the existing templates were 1 page)
    But it worked, saving me some steps.  When I was finished I renamed the document, and locked it.
    Then tried to save it but  could not because it was locked.  I closed it, went to my Spread Sheet Folder ,
    to find it, it was not there.  The Finder could not find it either.
    So I start over again.
    I opened up Numbers and it showed my personal Numbers template folder, it contained both my new 
    original 4 page template and the vanished saved document!
    I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again.  I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
    The secret is: Click on the document title in the menu bar, and it opens up  "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving.  Once done that, you can then lock the document in the same pull down menu, and then close it.
    I also found later that I can delete a template from its folder, by letting Numbers open the templates,
    clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
    and from there the selected template can then be thrown into the Trash from there.
    It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

  • Does anyone know why there would be slight latency using a digital out (Toslink w/adaptor) to my amp, where I don't have latency with an analogue cable? Is it the amp that is causing the latency?

    Recenty used a Macbook Pro with analogue out to my amp and there was no latency at all. Bought a new iMac and got a Toslink cable with adaptor and connected to same amp. There is slight latency using the digital out! Can anyone explain why? I don't really want to go back to using the digital cable because I have the surround sound setup that works well with the optical cable.

    error: I don't really want to go back to using the ANALOGUE cable....

  • Why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

    why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

    Disasble the computer's security software during the download and update.

  • HT4993 When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time.  Thanks for your help, Ellen

    When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time.  Thanks for your help, Ellen

    1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
    If you've done something different then provide some more details about what is where and I should be able to help.
    2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
    3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
    4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
    tt2

Maybe you are looking for