Why RAC services doesn't start automatically?

Hi All,
I have 2-node 10gR2 RAC installed on RHEL4. Whenever i restart the server, the services related to RAC are not starting automatically except VIP related services. Manually i have to start the services using crs_stop and crs_start commands. then, everything will be fine and working. There was no problems or error occurred while installation.
Whenever i restart my node VIP addresses which are in DNS takes about 10-15 mins to resolve, means to show up in ifconfig -a output. Is this related to service not starting automatically?
Can anybody tell me what might be the problem?
Thanks,
Praveen.

when a failure occurs, the cluster will put things back to the state they were in at the time of failure. So if your database is running and the node crashes or is rebooted, then the services should start because the target state is ONLINE. If you do a srvctl stop database, then this is a assumed a planned shutdown so we stop the database and the services (dependent resource as Erik says). If after you have successfully stopped the database, the target state of the service is OFFLINE. If you reboot at this point, then the database and service should not start.
All databases should work the same if they were created the same. There is not enough information in your post to know why they did not start. If it continues to be a problem, contact Oracle Support and they can help figure out the differences.

Similar Messages

SUP 2.0 Why the sybase Messageing Service doesn't start?

Hellow experts,
SUP 2.0 Why the sybase Messageing Service doesn't start?
When I start the service, it starts and ends indicating "if they are not in use by other services or programs; it will end automatically"
What should I do for this?
Thanks
Prabakar

sometimes you only have to restart your pc. STOP SUP SERVICE ( AS ADMINISTRATOR ) and START SERVICE ( AS ADMINISTRATOR AGAIN ) ...
That happens to me very often!

Db instance doesn't start automatically

Hello,
I have a problem with a db instance that doesn't start automatically when the system restarts. I have searched in the forum, and I have found similar questions, but their answers don't fix my problem.
I have Windows Server 2003 and Oracle10g. More information:
Services:
OracleOraDb10g_home1TNSListener service is started (and its startup type is automatic)
OracleServiceLAB service is started (and its startup type is automatic)
Registries in Windows:
ORA_LAB_AUTOSTART=true
ORA_LAB_SHUTDOWN=true
ORACLE_SID=LAB
System variable:
oracle_sid=LAB
When the system restarts, the services are started but the instance is down I get "ORA-01034: oracle not available". In the oradim.log file I see this error: ORA-12560: TNS protocol adapter error occurred.
I suppose that it can be a problem with the connection service name, but I don't know which one and why, because I have defined the oracle_sid system variable (it's true that without it the problem was the same).
Can anybody help me? Thanks in advance.
Best regards,
Arantza

ok , it seems there are some notes on metalink about diagnosing this error.
ORA-01034: oracle not available".
see below:
Oracle indicates the following possible causes:
The SGA requires more space than was allocated for it. Can you check how much SGA you have and memory
The operating system variable pointing to the instance is improperly defined.
And ORACLE recommends the following remedial action: Refer to accompanying messages for possible causes and correct the problem mentioned in the other messages. Retry after ORACLE has been initialised. If ORACLE has been initialised, verify that ORACLE was linked correctly. Also, refer to the installation or user's guide for additional information about this error.
After exhausting all other options, a simple reboot has been observed to resolve this error.
Regards

Windows listener service will not start automatically

I just installed 11.2.0.3 Standard Edition One and when I reboot the server, the listener service is not started. The service is set to start Automatically. I have to login, open services and then push start.
The oraceServiceSId does start automatically,
The listerner service does not start automatically,
The dbconsole service does not start automatically,
The processManger1 service (from middleware) does not start automatically
This is Windows 7 64 bit.
Any ideas?
Edited by: brian.mcginity on Dec 10, 2011 11:25 AM

I found where the services logs are recorded in the event viewer. Funny thing just happened, I was just about to do another reboot so I could check the logs when I noticed there were window updates in q.
So after running the updates, the os requested to reboot . For the first time, the services started automatically.
These are the updates which fixes the probem:
Security Update for Windows 7 for x64-based Systems (KB2639417)
Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2618444)
Security Update for Windows 7 for x64-based Systems (KB2620712)
Cumulative Security Update for ActiveX Killbits for Windows 7 for x64-based Systems (KB2618451)
Edited by: brian.mcginity on Dec 13, 2011 9:52 PM
Edited by: brian.mcginity on Dec 13, 2011 9:53 PM

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

How do I make it so that itunes doesn't start automatically when windows starts?

How do I make it so that itunes doesn't start automatically when windows starts?

http://support.apple.com/kb/HT5449
http://support.apple.com/kb/PH11443
http://support.apple.com/kb/PH11428

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

After Upgrade, Windows Service will not start automaticly

I just upgraded from 10.2 to 10.4. When I did the Windows File Service, will not start automaticly. I can start it manually, after a reboot. Any idea on how to fix this?

I am having the same problem on a clean install of Server 10.4.10, AFP & Web starts automatically on restart, but not Windows Service. This is the first time I have run into this, it starts fine on all other servers I administer. Then entry in /etc/hostconfig for SMBSERVER is set to "-YES-", there is no errors or messages of any kind in the console or system log, it just won't start.
This complicated with the problem I am having on the same server where I cannot connect via ARD after reboot without someone there physically plugging a monitor into the video port first (another open post I have - http://discussions.apple.com/message.jspa?messageID=5850246#5850246 ). So, doing maintenance at off-hours is almost unworkable.

SunONE CS 5.1.1 HTTP Service will Not Start Automatically

Hello,
I have just upgraded from iPlanet Calendar Server 5.1 to SunOne Calendar Server 5.1.1. (great improvement). However, the HTTP service will not start automatically on boot anymore. But after the boot sequence, I can start in manually. There are no errors posted to the Event Log so I am not sure what exactly is happening here. Maybe an ICS.CONF setting? I am doing this on Windows NT Server 4.0, SP6a. Any help would be great - thanks.

This is due to the fact that the directory server was not ready when the calendar needed it. I assume the directory server is running on the same machine as the calendar server.
What you have todo is the following :
you must create a dependancy between the http NT service and the LDAP NT service
- run regedt32.exe
- goto HKEY_LOCAL_MACHINE
- goto \system\currentcontrolset\services\iplanetcalendarhttpservice5
- you will see that this entry has alread an attribute with the name DependOnService
- click on it, and it will open
- add below tcpip the name of the service of the ldap. This service name can be found in the same
\system\currentcontrolset\services\
tree and begins with slapd-<instance-name>
when you reboot now, the http will wait until the LDAP has succesfully started before starting HTTP.

FIM Synchronization Service doesn't start

Hi,
Recently we have migreated FIM database from the local SQL server to an SQL 2012 Cluster. I used the following guide to configure DB related settings. Things worked fine.
http://social.technet.microsoft.com/wiki/contents/articles/5465.fimilm-how-to-move-the-backend-sql-server-synchronization-service-database.aspx
However after I uninstalled local SQL and rebooted the server FIM service doesn't start. The error message is:
The Forefront Identity Manager Sychronization Service depends the following service: MSSQLSERVER. This service might not be installed. (Event ID 7003).
How to fix this problem?
Thank you for your help.

I assume that you have uninstalled MS SQL Server, right? If so, please try the following:
Remove MSSQLServer from the DependOnService Value Name, a REG_MULTI_SZ data type
at HKLM\System\CurrentControlSet\Services\<ServiceKey>
Run as admin - it would remove dependency from FIMSynchronizationService.
Keep trying If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Update 11.0.1 doesn't show iphone or ipad and doesn't start automatically

iTunes looks different. All it shows is banner menu, nothing down the left side like it did before and it shows nothing about iphone or ipad and doesn't start automatic backup and my iPhone won't charge plugged into my computer. Frustrating, help, is it me or Apple?????

The view > Show sidebar is the way to go to make the app appear more familiar
This article covers Ipods not showing up and syncing
http://appducate.com/2012/12/troubleshoot-an-ios-device-that-wont-sync-in-itunes /

OracleOraHome92ManagementServer service is not starting automatically

Hi all,
OracleOraHome92ManagementServer service is not starting automatically, though we have set it to start automatically. We get the following error message when we tried to start manually.
"Could not start the OracleOraHome92ManagementServer service on Local computer.
The service did not return an error. This could be an internal winodws error or an internal service error."
If we restart the entire server , then OracleOraHome92ManagementServer service is getting started automatically.
Kindly assist me in resolving the issue.
On analysing we find the error messages below is the error message.
VXA-2028 :
Unable to connect to OMS repository.
at oracle.sysman.vxa.VxaAppServer.startServices(VxaAppServer.java:1596)
at oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:3144)
Error starting Oracle Management Server.
VXA-2028 :
Unable to connect to OMS repository."Could not start management server. Initialization failure"
OEMCTL for Windows NT: Version 9.2.0.1.0 Production
Copyright (c) 1998, 2002, Oracle Corporation. All rights reserved.
Starting the Oracle Management Server... [main][2012-1-4:9:14:7:67] VdbSession.processError: errorCode >12505<
[main][2012-1-4:9:14:7:67] VdbSession.processError: errorMsg >ORA-12505: TNS:listener could not resolve SID given in connect descriptor
<
[main][2012-1-4:9:14:7:67] VdbSession.processError: invalid connect string
[main][2012-1-4:9:14:17:129] VdbSession.processError: errorCode >12505<
[main][2012-1-4:9:14:17:129] VdbSession.processError: errorMsg >ORA-12505: TNS:listener could not resolve SID

If you check internet most times it is about adding the ip address and hostname (+ FQDN ) in C:\WINNT\System32\Drivers\Etc\Hosts file. Do you have that in your hosts file?
Eric

Apple TV3 doesn't start automatically when i select airplay from my iMac and Ipad 3. i have to manually turn it on then it works fine after that! what is wrong with which setting.

Apple TV3 doesn't start automatically when I select airplay from my iMac (Yosemite) and Ipad 3( iOS 8.1.3) i have to manually turn it on then it works fine after that! what is wrong with which setting.

You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry

When Starting OC4J, why the report server doesn't start automatically? !!

Dear All,
I have DS 10g on my system and I start the OC4J when I have to run either forms or reports.
But when I attend to start the do the following command from the form:
WEB.SHOWDOCUMENT(..../getjobid<jobid>?server=<servername>...), I have an error: FRM-41213: Unable to connect to the report server <servername>.
I noticed that if I run the following URL:http://<server>:.../reports/rwservlet, it gives me a list of command, but the server still not running..But if I add any command to the above URL like for example "getserverinfo" or "showjobs" then the server is started. Now, and after the command, if we return back and we run the report from the form, the report will run successfully.
The question WHY??
Regards,
Joe
Message was edited by: Joe
Joe Farah

Hello,
That's the way it works ...
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm
2.1.3.1 Starting the In-process Server (Windows and UNIX)
If you are using Reports Server as an in-process server (the default configuration), sending a run report request starts the in-process server; however, if you are sending a request through a command line, the servlet must be invoked first using either the run report URL or the Web command URL. When you have successfully started the servlet, this also means you have successfully started the in-process server.
If you use "Oracle Application Server", the "in-process" reports server will be started automatically by opmn ...
Regards

"Reporting services" service does not start automatically

I have installed reporting services from SQL Express SP1 package. OS is Windows 2000 SP4. Just after installation "Reporting services" service has StartMode=Automatic and LogOnAS=LocalSystem as shown in SQL Server Configuration Manager. When system is rebooted reporting services state is Stopped and there is 2 errors in System log:
1. Timeout (30000 milliseconds) waiting for the SQL Server Reporting Services (REPS) service to connect.
2. The SQL Server Reporting Services (REPS) service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
If i select "start" from service's context menu then it starting normally and it's state becomes Running.
What can i do to make reporting services starting automatically on system load?

i have the same problem here in one of our servers ,, it was working and suddenly it stopped i don't know why
when i reviewed the Event Viewer :
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 8/22/2010
Time: 12:05:26 PM
User: N/A
Computer: SERVICE-CENTER
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information. ---> System.UnauthorizedAccessException:
Access to the path 'C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer\RSReportServer.config' is denied.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at Microsoft.ReportingServices.Diagnostics.Globals.SafeOpenXmlDocumentFile(XmlDocument doc, String pathToXmlFile)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.LoadDocument()
   at Microsoft.ReportingServices.Diagnostics.R...
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any body can help with this ,, because i didn't find anything helpful till now !!!
dear all
i installed SQL Server 2005 SP2 and it solved my problem
wish you all luck

Why RAC services doesn't start automatically?

Similar Messages

Maybe you are looking for