Why RAW converter 6.5 not uploading in my PSE 9?

Hi,
I have a camera Canon T3i and am using PSE 9 to work on my photo's. Recently I bought an iMac and uploaded my PSE 9 and the CR2  (RAW) files are not able to be read. It right away makes my photo's JPEG's. I uploaded the RAW converter 6.5 for PSE 9 as suggested by the Adobe page. When I look at where my 6.5 download went to, its sitting in a "downloads" folder in my hard drive...do I need to move this to another location for it to upload into PSE 9? 
When I look for upgrades in my PSE 9 program itself it tries to upload the 6.5, but it says there was an error in downloading the update. I have tried to uninstall PSE 9 and re-install it twice now, and the RAW converter version is still 6.1 in my PSE 9.
Help please?? I have been working on this literally for days..without much luck.
Thanks in advance.
Anita

Next time you have an installer you can right click on it and select Open and that bypasses the security settings set in the System Preferences.
For example, in your screenshot, right click on the AdobePatchInstaller.App, select Open and the next dialog click Open.
(you can also Control click on the installer to do the same thing)
http://support.apple.com/kb/ph14370
You can get the updates for pse 9 from here:
Adobe - Photoshop Elements : For Macintosh

Similar Messages

  • Sharing photos from iphoto 11, why does the photo information not upload when I click with share via email?  How can I make sure the photo information and location are shared when the photo (s) are shared.

    When I go to share photos in iPhoto 11, The photos transfer to the email I'm sending but the photo information and location don't.  The older version of iPhoto did it, why not this version?  What am I missing in the process of sharing via email?, Thank You.

    When you share to email do you get the following dialogue:

  • HT3412 why will my iphoto book not upload? I have previously uploaded to books without any problems.

    I am unable to upload my iphoto book for printing. I have previously uploaded two books without problems. It gets through the assembly step and the blue bar fills up the Upload bar except for a "hair" at the end, then I get the message that upload has failed. Cancel order or try again.

    Preview yout book using this method - http://support.apple.com/kb/HT1040
    If it is good boot into safe mode, preview again and after checking again order while in safe mode
    LN

  • Why does my library randomly not upload to my iphone anymore?

    I began to delete a few songs off of my itunes library today and added a few, then I began to sync my iphone with the new library and only 3 songs show up on my iphone, how can i fix this?

    Sometimes that is a business decision, sometimes technology driven.  Operating systems and software get to a point where hardware is not capbable of using the software effectively so it is not supported.  This has happened a few times in the life of various Mac OS versions.
    It's frustrating but not much we individual users can really do about it.

  • Has a RAW converter for the Canon 7G MarkII been added yet?

    Im trying to find out whether the Canon 7G Mark II has been added to the Adobe Photoshop and Lightroom Raw Converter

    >This is not how a customer service oriented company should operate.
    Indeed Canon should work with third party raw conversion providers (Apple, Adobe, DxO, PhaseOne) to provide raw support from the day they release the camera by giving access to prerelease cameras or by using an open raw format. Canon (like Nikon) is not a customer-oriented company as they don't seem to understand that very few photographers use their dinky software and that the overwhelming majority prefer third party raw converters. Instead they expect Apple, Adobe, PhaseOne, etc. to go out to the store when a new hot camera comes out, buy a few copies and profile the new camera (quite a laborious process) and reverse engineer the raw file format and push out an update to their raw converter when it is added before their customers get raw support. These companies don't get these cameras any quicker than you or I do. To the contrary Canon or Nikon could have Apple, Adobe, etc. provide support for their cameras from day one by sharing some info, or by simply using an open raw format such as dng. Other camera makers do this and their cameras' raw files are usually supported right away.
    The big two are not going to get this until they hear that we refuse to buy their cameras without third-party raw support. Some like Thom Hogan have actually already claimed that slow initial sales of many new Nikon and Canon cameras was caused by this. Apparently people are wisely waiting for third party raw converters to have support for new cameras before buying. I know I do this as Lightroom ACR, and Aperture are my main raw tools.

  • Premier Elements not uploading in HD?

    Why does my Premier Elements not upload to Facebook or Youtube in HD? It gives you the options to upload in HD or SD but both options seem to be the same. I physically have to go to Facebook and click the HD button in the bottom of the video, which I suppose is fine for me, but it not when friends or family don't think of pressing the button. It pays back in HD through Elements but no where else.

    Sazzx636r
    What version of Premiere Elements are you using and on what computer operating system is it running?
    What is your project preset? (Edit Menu/Project Settings/General)
    And what are the properties of your source media on the Timeline? Are you or the program setting the project preset to match the properties of the source media? What is the estimated file size and duration of the upload as shown in the export area dialog?
    If you set for a HD upload to YouTube or Facebook from within Premiere Elements upload to these programs, then that is what you
    are uploading. What happens to your upload afterward is at the hands of the YouTube and Facebook conversion processing.
    Have you seen the YouTube document on Advanced Encoding Settings?
    Are you getting hung up on the Quality Settings at YouTube - 1080p ------144p, Auto. Those are automatically set by YouTube and have nothing to do with Premiere Elements directive or misdirective.
    Please supply details of your issue, and we will be glad to work through the issue with you.
    Thanks.
    ATR

  • PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

    PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

    Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
    Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
    Anyway thanks again

  • Using old raw converter - why?

    Aperture 3.2.3 has started importing images and processing them with an old raw converter for some reason.  When I look at the image the first brick of the Adjustments tab contains a warning that the raw file was convertered using an old raw converter and giving me the option to update the processing.   This has just happened all of a sudden, and I can't find any preferences to change the processing engine to the proper converter.   Any ideas?  Thanks.

    I just noticed that there's an update to 3.2.4 anf to the raw converter.  I applied those updates and the problem has gone away.  Not sure why it happened in the first place 'though.  One of those things...

  • Why some photos in my Photos library did not upload to my iCloud photo library. Isn't supposed to be automatic?

    Why some photos in my Photos library did not upload to my iCloud photo library. Isn't supposed to be automatic?

    Is there something special about the file formats? iCloud Photo Library supports:
    JPEG, RAW, PNG, GIF, TIFF, and MP4.
    And no JPEG must be larger than 16GB.
    The photos will not upload, if the original image file is missing. Can you edit or export the photos, that did not upload?

  • Elements 9 w/ RAW converter 6.5 will not convert files from Canon S100.

    Elements 9 with upgraded RAW converter 6.5 will not download (or convert) files from my Canon S100.

    Thank you for the reply.  I have struggled with this problem for about 6 weeks.  Got bum information from both Canon and Adobe.  Grew discouraged.
    As a “test” after reading the discussion, I downloaded the trial version of Elements 10.  It contained RC 6.6, which would not do the S100.  I “updated”
    to 6.7 which finally did the job.  I’m really curious as to why the download of Elements 10 doesn’t “ship” with the latest RC?  I guess just to maintain
    confusion for as long as possible.
    Thanks again.  Only your reply enabled a final solution.
    Graden Harger
    Houston

  • FTP as remote destination not uploading - why?

    Problem:
    I can't get the Remote FTP destination to work in Compressor 3.1 - anyone able to help?
    Details...
    If I submit a job with a FTP destination, the job creates the compressed file but does not upload to the FTP location. Each and every time when I view the Batch Monitor it shows 'error' and tells me...
    Status: Failed - Failed to upload to ftp://users:••••••@mydomain.com/home/mydomain/public_html/downloads/-29-10-2007. m4v, encoded file is in: /var/tmp/1E668CBD-50D2-4019-AAD1-1CB58C3CE0A7-local--29-10-2007.m4v
    I have tried entering the 'standard' path (usual root address) for the remote destination e.g. /downloads and also the full server path e.g. /home/mydomain/public_html/downloads and it doesn't work with either.
    I use the same settings in an FTP program and it works fine. Not with Compressor. *Anyone know why?*

    Yes, I have checked it. Its ok.
    And if I run this program in foreground it is working fine and posting a file in the FTP remote server.
    I would like to explain the logic which I have used here.
    I pick the data from my program logic and place the data in the application server.
    Now I will pick this file and send it to the remote FTP server.
    This process is working when i do it in foreground.
    But failing in background job.
    My file till application server is ok.
    Regards
    Sunil

  • Why does my Photoshop Cs6 not let me view my Nikon D7100 photos in Camera Raw and photoshop when it does my Nikon D700?

    Why does my Photoshop CS6 not allow me to download my Nikon D7100 photos into camera raw and photoshop when it does my NIkon d700?

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    D700 first supported in Adobe Camera Raw (ACR) 5.1 (CS6 ships with ACR 7.0)
    D7100 first supported in ACR 7.4
    You probably just need to update Camera Raw in CS6 via Help > Updates.
    Confirm which ACR version you have installed via Help (Win) or Photoshop (Mac) > About Plug-In > Camera Raw.

  • Can anyone tell me where I can aquire a Photoshop CS6 Raw converter(nef,not DNG) for my Nikon D600 Camera

    Can anyone please tell me where I can aquire a Photoshop CS6 Raw Converter(nef, not dng) for my Nikon D600.
    I would also be grateful if you could assist me in telling me how you install the "pluggin" into the suite software?
    Any assistance would be most appreciated.
    Regards
    Mark Silk

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    The Nikon D600 is supported by Camera Raw 7.3 and later which is compatible with CS6.
    In CS6, click Help > Updates and your Camera Raw should be updated.
    Check the exact version of Camera Raw which you have installed via Help > About Plug-ins > Camera Raw

  • How do I replace beta raw converter 8.5 with 8.3 for CS6 not a CC user

    I did not see that 8.5 was a beta and always will show a beta box to click each time I use it... how do I go back to Raw 8.3 that I had before
    Restore did not do it
    installing 8.3 , said it was install but still have 8.5Beta
    any way out of this mess??
    I could not find the Raw converter plugin to erase it ..??
    Don
    CS6 user not a CC user...tnx

    In a help system, you likely have bookmarks and such, other wise printing to a new PDF with expanding to fit would be a simple approach. Actually it is probably best to go back to the original and change paper size, making a new PDF.
    Other options include using the crop tool to change the paper size. Unfortunately, the body does not generally expand to match the text. It may be that just printing to a new PDF would be the simple root to go since you are talking about a print version, not a linked version. Be sure to select the paper in the printer properties and then select print to printer margins. This will give a large print version. If you want to keep the smaller printer size, you really need to go back and deal with the original and make a new PDF. If you just make a copy of the original, you would have both versions available.

  • PSE8 raw converter not opening.

    When I open a raw file (CR2) PSE goes directly to the full edit menu without opening the raw converter. It used to work, then started doing this. I have been using PSE since version 3, so I know the advantages of the raw converter and want to use them.
    Anybody have any idea what I am doing wrong?

    Not intentionally, but I have been having some issues with several prog
    rams not fitting the screen correctly since about the same time this issue started. Obviously you may be on to something.
    Can you assist in correcting?

Maybe you are looking for

  • Looking for a program or app

    just coming from windows,i dont know if you call them apps or programs? im looking for something that will keep track of customers,money they owe,and money they pay.would be nice if it worked with the calendar and phone book but not necessary.thanks

  • UK Payroll tax code 1000L

    Hello Friends:   In UK Payroll new tax code 1000L I have updated in Constant table V_T511K effective April 06th 2014 but this code is not going to Ceridian interface(PU12).   Any help is appreciated. Thanks in Advance

  • Dynamically  filename is required in CC but not reuired in Target field

    HI, my requirement is to create filename dynamically(UDF) in Receiver communication channel but I dont want the name should be populated in the target field as target field is not provided by business. I received the below UDF from SDN    String date

  • Got a new 6 and i tunes login says "you are not an administrator of the group"??

    My daughter just received a new 6 and is trying to login to i tunes and is receiving message "you are not a member of the administrator group". What does this mean? She and I originally shared an apple Id as she is a minor but my husband thinks he cr

  • Xcopy Command From Sql

    Dear Guru's, I have Script of my all the procedure. After all procedure gets execute, As a output it create .csv files. This .csv files i manually copy past on one of my directory. For avoiding this manual copy past i want to use xcopy command from s