Why RD Connection brocker redirect on wrong RDSH server?
I have 3 RDSH and 1 RDCB servers. I installed Acrobat Pro on one of RDSH server and create rdp file. When i try to run rdp file RDCB server (load balancing) redirect my session on worng RDSH server wich not have installed acrobat pro. What i can configure
to redirect all acrobat sessions on one server?
Hi,
All RDSH servers that are part of the same farm name are expected to have the
same applications installed on them so that the RDCB can balance the load as needed. If you need a specific application to only be installed on one (or more) servers then those servers need to be part of a different farm name or not be joined to
the farm at all.
For example, if all 3 RDSH servers are configured in RD Session Host Configuration for farm name Farm1, then all 3 RDSH servers need to have the same applications installed on them.
-TP
Similar Messages
-
I am connected to my iMac to recharge iPad but it is saying "Not charging" ! Why and what have I done wrong?
If you already updated to 8.0 you're doing nothing wrong. It's one of the lovely issues created by the update. I just tested mine, same problem.
-
Error message: X11 connection rejected because of wrong authentication
Until recently I was able to ssh from the Mac in my office -- runing
MacOS 10.6.4, to a Sun Solaris server -- running Solaris 10 10/09
(update 8) and all available patches installed, and run X11 programs
displaying on my Mac.
I installed these patches recently:
142900-15 SunOS 5.10: kernel patch
124867-15 Sun Studio 12: Patch for C 5.9 compiler
122212-42 GNOME 2.6.0: GNOME Desktop Patch
138764-02 SunOS 5.10: acc driver patch
120199-16 SunOS 5.10: sysidtool Patch
119252-29 SunOS 5.10: System Administration Applications Patch
124630-44 SunOS 5.10: System Administration Applications, Network, and Core Libraries Patch
124628-10 SunOS 5.10: CD-ROM Install Boot Image Patch
118777-17 SunOS 5.10: Sun GigaSwift Ethernet 1.0 driver patch
121118-17 SunOS 5.10: Update Connection System Client 1.0.17
144759-02 SunOS 5.10: mount patch
145019-01 SunOS 5.10: ifconfig patch
119313-38 SunOS 5.10: WBEM Patch
124393-10 CDE 1.6: Dtlogin smf patch
119278-37 CDE 1.6: dtlogin patch
121734-13 SunOS 5.10: patch to support addition of new UTF-8 locales
119254-75 SunOS 5.10: Install and Patch Utilities Patch
118666-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25)
118667-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25), 64bit
121430-53 SunOS 5.8 5.9 5.10: Live Upgrade Patch
119246-38 SunOS 5.10: Manual Page updates for Solaris 10
121308-22 SunOS 5.10: Solaris Management Console Patch
119315-21 SunOS 5.10: Solaris Management Applications Patch
118712-24 SunOS 5.10: Sun XVR-100 Graphics Accelerator Patch
144325-02 SunOS 5.10: Resource Management User Interface Patch
145074-01 SunOS 5.10: Trusted JDS Help rebranding patch
124457-03 X11 6.6.2: xdm patch
and now when I try to run certain programs, namely Symantec NetBackup
Server (NBS) administrator interface, jnbSA, when I run the program I see:
X11 connection rejected because of wrong authentication.
and jnbSA fails. I removed these patches:
118666-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25)
118667-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25), 64bit
124457-03 X11 6.6.2: xdm patch
with no change. I have made NO updates to NBS, and what's
even more weird, regular X11 programs such as x{eyes,biff,emacs}
work fine.
I've tried tinkering with the contents of ~/sshconfig and /etc/ssh_config
to no avail.
Is anyone else seeing this problem?
Any suggestions?
Thanks!I'm confused why you posted on the Tarantella/SGD Forum then?
Yes, you can use SGD to have your Mac client display back a Solaris/Linux/Windows/Mainframe, etc application remotely.
http://www.oracle.com/us/technologies/virtualization/oraclevm/061996.html -
Error: "X11 connection rejected because of wrong authentication"
I am not sure this is the correct forum to post this
question, if it is not, I'd appreciate it if someone would
tell me a more appropriate place.
I have an occasional problem when I use either ssh -X or ssh -Y
to a Oracle (nee Sun) Solaris host. I can run most
X11 programs but when I run one particular program, the
program will display this error message and fail:
X11 connection rejected because of wrong authentication.
The program which occasionally fails is the Symantec Netbackup
Server Administrator interface: jnbSA. Like I said other X11
programs run fine (xeyes, xbiff, xclock, etc.) It's just this
one application which fails intermittently. When it fails
it will display these messages:
DISPLAY environment variable is set to: p2:10.0
Console was started on:
SunOS p2 5.10 Generic_142900-15 sun4u sparc SUNW,Sun-Fire-V250
Command line options were:
/opt/openv/netbackup/bin/jnbSA
Starting administration console version 6.5.
LANG=iso88591
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LCALL=iso_88591
java version "1.5.0_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_17-b04)
Java HotSpot(TM) Server VM (build 1.5.0_17-b04, mixed mode)
Warning: Cannot convert string "-monotype-arial-regular-r-normal---140-*-*-p--iso8859-1" to type FontStruct
X connection to p2:10.0 host broken (explicit kill or server shutdown)
Like I said, I can start, say xclock, immediately after
the above termination, and it would run fine.
It is maddening because jnbSA works sometimes, and
fails with the above errors at other times.
I have tried to follow this on the X11 forums, but
most suggest making a change to /etc/sshd_config and
while I tried changing that, it still does not correct
this problem.
Suggestions?I'm confused why you posted on the Tarantella/SGD Forum then?
Yes, you can use SGD to have your Mac client display back a Solaris/Linux/Windows/Mainframe, etc application remotely.
http://www.oracle.com/us/technologies/virtualization/oraclevm/061996.html -
I am running Windows Vista on my desktop. I also have Firefox 5.0 downloaded on my pc.
Whenever i try to download a software update or any type of file the Firefox Download box doesn't activate anymore like it once did.
Why? What am i doing wrong?'''''Options > General''''', be sure "Show the downloads window when downloading a file" is selected. See [https://support.mozilla.com/en-US/kb/Options%20window%20-%20General%20panel Options window - General panel]<br />
To remember download history in the download window, '''''Options > Privacy''''', "Remember download history" must be selected. See [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window - Privacy panel]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Why is Firefox continually redirecting me away from the site I'm looking for?
When I go to a site, I get redirected to an advertising site. When I backspace twice I get returned to the Google search page and then I can go directly to the site I'm punching in. But why am I getting redirected all the time?
Search redirect malware.
Install, update, and run these programs in this order. They are listed in order of efficacy.<br />'''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' <br />These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
SuperAntispyware - [http://www.superantispyware.com/] <br />
AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]<br />
Also, if you have a search engine re-direct problem, see this:<br />
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: <br />
[http://www.spywarewarrior.com/index.php] <br />
[http://forum.aumha.org/] <br />
[http://www.spywareinfoforum.com/] <br />
[http://bleepingcomputer.com] -
Enable USB redirection on 2012 RDSH running on ESXi for thin client
What I have configured right now is Windows Server 2012 RDSH server installed on a ESXi 5.1 host.
I am going to be purchasing thin client machines that will need to use USB headphone/mic combo units. I need to make sure that the USB redirection will work from the thin client to the RDSH RDP session. I will NOT be using virtual machines
on the server, only a terminal session. Please help me with the following points.
1. Is windows 8 embeded my only option?
2. Does RemoteFX support USB redirection on server 2012 RDSH?
3. I have not been able to find an applicable guide to help me with what I am doing.
Thank youHi,
After referring your post, I can understand that you are looking for RemoteFX USB redirection on server 2012. Yes, server 2012 support RemoteFX USB redirection and can able to use the benefit of server. Here providing you the related article for configuration,
please go through beneath article.
1. RemoteFX USB Redirection in Windows Server 2012 and Windows 8
2. Configuring USB Device Redirection with Microsoft RemoteFX Step-by-Step Guide
3. Introducing Microsoft RemoteFX USB Redirection: Part 1
Hope it helps!
Thanks,
Dharmesh -
What would be the reason why when i try to connect my iphone to a wifi server; it doesn't work? It also doesn't pick up any wifi connections.
go to settings>general> reset network connections and then try again
-
Why do i get redirected to **** sites
why do i get redirected to **** sites
Is that a euphemism for 'adult' sites?
Redirection can happen if you have installed Safari (or whatever browser) extensions. Turn them all off & retest.
You may also have malware or adware installed…
Apple have this guide for removing manually…
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
Or look at …
http://www.thesafemac.com/arg/
and the removal tool Adware medic.
http://www.adwaremedic.com/index.php -
I can't seem to connect to the iPhone software update server, why would that be?
I can't seem to connect to the iPhone software update server, why would this be?
In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
Why is the Apple Weather App wrong for low temps in Albuquerque, NM?
Low temp is always displays about 10 degrees too low.The reason for the problematic weather prediction in Apple is simple and disturbing at the same time.
1. Traditionally Apple gets its weather data from Yahoo! they do so regardless to the fact that Yahoo is not a weather company, this arrangement has historical reasons (and it has nothing to do with the accuracy or quality of service you as a user are getting from Apple weather).
2. Yahoo! (not a weather company) gets its weather data from the Weather Channel.
3. Weather Channel CEO (David Kenny) also serves as Yahoo board member. So good luck changing the Weather Channel Yahoo agreement.
4. The iPhone build in weather app is one of the world most popular apps, The Weather Channel has no incentive to make the Apple weather app as accurate as The Weather Channel own app.
The result is – easy to use inaccurate weather app -
HT4623 Why does connecting to S/W download fails whether from the computer or iPad?
Why does connecting to S/W download fails whether from the computer or iPad?
Where are you trying to download? My App Store app is working just fine.
First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
Why 9 connections are automatically created per one jms topic?
Why 9 connections are automatically created per one jms topic?
Is it possible for one topic to have one connection, rather nine connecions?
If so, any drag concerning having one connection of one topic?
Let me know asap, it would be really appreciated.
<code>
public void connectJMS() {
try {
if (RTConst.getInstance().getConnectMode() != RTConst.NOTCONNECT) {
targetTCF = ServerDelegate.getTopicFactoryComm();
targetT = ServerDelegate.getTopicNameComm();
connection = targetTCF.createTopicConnection();
session = connection.createTopicSession(false, Session.AUTO_ACKNOWLEDGE);
topicSubscriber = session.createSubscriber(targetT);
topicSubscriber.setMessageListener(this);
connection.start();
System.out.println("[CommJMSReceiver] Common Topic Connection successed");
} catch (Exception ex) {
System.out.println("[CommJMSReceiver] Common Topic Connection failed");
ex.printStackTrace();
</code>
Message was edited by:
PaulSheldonII_ScreenWhy 9 connections are automatically created per one jms topic?
Is it possible for one topic to have one connection, rather nine connecions?
If so, any drag concerning having one connection of one topic?
Let me know asap, it would be really appreciated.
<code>
public void connectJMS() {
try {
if (RTConst.getInstance().getConnectMode() != RTConst.NOTCONNECT) {
targetTCF = ServerDelegate.getTopicFactoryComm();
targetT = ServerDelegate.getTopicNameComm();
connection = targetTCF.createTopicConnection();
session = connection.createTopicSession(false, Session.AUTO_ACKNOWLEDGE);
topicSubscriber = session.createSubscriber(targetT);
topicSubscriber.setMessageListener(this);
connection.start();
System.out.println("[CommJMSReceiver] Common Topic Connection successed");
} catch (Exception ex) {
System.out.println("[CommJMSReceiver] Common Topic Connection failed");
ex.printStackTrace();
</code>
Message was edited by:
PaulSheldonII_Screen -
X11 connection rejected because of wrong authentication- Opera not starting
Hi,
I tried X11 forwarding on a remote machine by giving the command
ssh -X user@remote-host-name
And I successfully logged into that remote machine and X11 is working properly. Even I started mozilla, firefox etc - working properly.
But, when I tried to start opera, I got the below error message.
-bash-3.00# opera
opera: $HOME set to /root. Use -personaldir if you do not want to use /root/.opera/
X11 connection rejected because of wrong authentication.
opera: Fatal IO error: client killed
I appreciate your efforts and guidelines.
Thanks & Regards,
Paras.I have no idea but the Opera support Forums are usually active and competent.
alan -
Issue with re-connecting a Client Computer to the Server Essentials R2 2012
I have an issue re-connecting a Client Computer to Server Essentials R2 2012. The Client Computer in question was connected to the Sever originally. I started getting Error Messages indicating that I was running out of storage room. I
had been wanting to re-configure this Server with additional Hard Drives for some time, but something else always came up first. Now, I was forced to address the problem. I shut down the Server and added additional Hard Drives and while I was at
it I replaced the original Hard Drive that the Server Operating System was on with a much smaller Hard Drive, and reinstalled Server Essentials on that Drive. Everything was working fine and the Server Back-up went fine to an external Hard Drive.
I was ready to re-install my Client Computers. I started with my primary Production Computer first. The Connector Software seemed to install fine, but as I moved through the Connection Wizard I received the following Error Message: "Cannot
connect this computer to the network. This computer is already connected to another Windows Server Network. Before connecting this computer to the Windows Server Essentials network, you must remove this computer from the current network.
To resolve this issue, contact the person responsible for your network". I am the Administrator. I removed the Connector Software following the instructions in the "Troubleshooting connecting computers to the Server", but I continue
to get the Error Message whenever I attempt to re-connect the Client Computer. I have not attempted to connect any of the other three Client Computers yet as I need to resolve this issue first on my primary production machine. Where am I going
wrong? Does anyone have any suggestions?Hi PARADOX-RED,
Based on the error messages that you provided, please remove the connector software from Control Panel completely. Then, in the problematic computer, please locate
to: Control Panel-> System-> select Change settings. And select the Computer Name tab in the System Properties dialog box, click
change button. Then in the Computer Name/Domain Changes dialog box, please take the computer out of the domain as a workgroup, and rejoin in new domain.
Please check if this issue can be solved. If it still exists, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Maybe you are looking for
-
"How do you build a filter based on the conditions of two columns?"
Hi all, line desc Period Amount1 Amount2 jan feb 0 10 jan mar 0 20 jan jan 0 30 jan apr 0 40 I have a report like this with four columns Line Descr is from one table and period from other table and amounts 1 and amounts 2 are respective a
-
I have a mac book pro and I use Hp photosmart plus printer/scanner. Earlier today a pop up came up asking if I want to set Adobe as the default. I clicked yes. Since then my documents come up as a black screen. I think that I have go back to the orig
-
Issue when accessing standard LM transactions via ITS
Hi, We are implementing WM using ITS Mobile. We have developed certain custom screens and also used standard transactions such as LM02 and LM04.We have created a internet service for transaction LM01 and published all our custom and standard screens
-
Not showing tables today...again.
im using the dreamweaver toolbox and cs3 and i can only sporadically find my tables. it frustrated the hell out me but now its just not working at all. i can upload and download form my server but i can never access my tables "no tables found" i thin
-
ICloud: i can't subscribe to shared calendar or memorandum
When someone invite me to share calendar or memorandum, i can't subscribe.!?