Why Recovery Catalog
Why I cant use control file to make repeated TSPITR unless use recovery catalog ?
If I use recovery catalog, can I use backups of tablespace before created recovery time ?
Best Regards
1 Because of mandatory open resetlogs after TSPITR. This creates a new 'incarnation' of the database, invalidating the previous incarnation.
2 Yes
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
Why SYS cannot be the owner of the recovery catalog
my question is why? i know SYS cannot be the owner of the recovery catalog as per oracle documentations and books.
why SYS cannot be the owner of the recovery catalog?Hi
SYS is like root/system admin for the database. It has to distribute jobs according to specific purpose. SYS could have been the owner of RMAN catalog but it does not make sense to keep it with SYS objects as it is easier to find all related catalog tables in a separate schema rather than combing with any other sys/system schema. The choice is logical.
Regards -
What's the recommended guideline on backing up a recovery catalog?
while I understand "Benefits of Using the Recovery Catalog as the RMAN Repository" as stated in
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmquick.htm#442214
as well as things to take note if using control file as the sole rman repository,
as stated in "Monitoring the Overwriting of Control File Records" in http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmrepos.htm#446924
I do not understand why in Backup and Recovery Advanced User's Guide
http://download.oracle.com/docs/cd/B14117_01/server.101/b10734/rcmrepos.htm
"Back Up the Recovery Catalog Often"
Even if you have to restore the recovery catalog database using a control file autobackup, you can then use the full record of backups in your restored recovery catalog database to restore the target database without using a control file autobackup for the target database.
=>probably implies that we can use another recovery catalog let's call it backupbackup to restore the recovery catalog
"Choosing the Appropriate Method for Physical Backups"
Follow these guidelines when developing an RMAN backup strategy for the recovery catalog database:
* Run the recovery catalog database in ARCHIVELOG mode so that you can do point-in-time recovery if needed.
* Set the retention policy to a REDUNDANCY value greater than 1.
* Back up the database onto two separate media (for example, disk and tape).
* Run BACKUP DATABASE PLUS ARCHIVELOG at regular intervals, to a media manager if available, or just to disk.
* Do not use another recovery catalog as the repository for the backups.=> this contradicts the previous statement
* Configure the control file autobackup feature to ON.
so may I know what's the recommended guideline on backing up a recovery catalog? should we use another recovery catalog to keep the rman repositories of the the main primary catalog or just use a control file autobackup feature?
thanksI understand the question and the confusion.
Please note, however, that this forum is for discussing problems and errors with the documentation in general. Your question is related to a specific product and is, as far as I can tell, not a note about a documentation error or a correction.
The appropriate place to discuss this is the Database (General) forum or - perhaps surprisingly - the RMAN forum. These can both be found by
1) Clicking on the 'Forum Home' link at the top of this page;
2) Scrolling down to the category 'Database' (a category is identified by a special row format that does not list the number of topics)
3) Expanding the category by clicking on the 'More ...' link.
4) Scrolling down to the "Database - General" or "Recovery Manager" forum and clicking on it's link.
Note that forums have a search function that may be used to find answers if someone has already asked a similar question. -
How to enable RECOVERY CATALOG
Hello, Please kindly give me the steps to use recovery catalog for backup and recovery. We are using right now control files. We need to use recovery catalog. Help me please.
Habfat,
Quoting bullet 1 from the Forums Etiquette post
- When asking a question, provide all the details that someone would need to answer it. Consulting documentation first is highly recommended.
Most questions have 4-digit version specific answers, you didn't provide a version.
And what you really should have done instead of asking this question
is go to http://tahiti.oracle.com type ' RECOVERY CATALOG' in the search box and get your answer.
Why bother this forum with Yet Another Doc Question, when you can look it up yourself and get your answer sooner.
Apart from that, I have been monitoring you, and it appears ALL of your questions are doc questions.
So yes, this is abuse, as everyone here is a volunteer, and you shouldn't burden them with looking up something you can lookup yourself!!!!
Sybrand Bakker
Senior Oracle DBA -
Implicit resync of recovery catalog failed
Hi,
Our RMAN delete script is failing with below error
============================
RMAN> set echo on
2> sql 'alter session set optimizer_mode=rule';
3> run
4> {
5> delete obsolete recovery window of 2 days device type DISK;
6> }
7> exit;
echo set on
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of sql command at 05/24/2010 07:15:06
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of partial resync command on default channel at 05/24/2010 07:15:06
ORA-00904: : invalid identifier
=========================================
Please suggest
Regardswhich version of Oracle are you using and why are you setting the optimizer to RULE ?
Coskan Gundogar
Blog: http://coskan.wordpress.com
Twitter: http://www.twitter.com/coskan
Linkedin: http://uk.linkedin.com/in/coskan
--------- -
Hi,
Can anyone let me to know, what should be the minimum space required to configure Recovery Catalog? Where can I find the document for this? can anyone throw light on this?
With Regards;
BooHi,
In automatic configuration there is a setting available like
configure channel device type disk format '%U%;
when I issue
configure channel device type disk maxpiecesize 2G;
the above setting is gets replaced with the later one. Is anything wrong with my config? or will it happen? If it happen please let me know the reason why ?
one more question is,
Imagine if we had set parallelism to 3
and we configure channel as
configure channel device type disk format '%U';
instead of configuring the below one.
How rman will process at this moment?
configure channel 1 device type disk format '%U';
configure channel 2 device type disk format '%U';
configure channel 3 device type disk format '%U';
With Regards
Boo -
RMAN-06428 recovery catalog is not installed
RDBMS Version: 8.1.6
Operating System and Version: sun sparc 5.8
Error : RMAN-06428 RMAN-06428 recovery catalog is not installed
Product (i.e. SQL*Loader, Import, etc.): RMAN
Product Version: 8.1.6
Hi,
I hv a database running in unix box 1 (say 'FAST')
and Im trying to install a recovery catalog database in unix box
2
(Rcat)
1) in unixbox2..I hv created a new database, and I hv created a
tablespace rcvcat and user rman .granted catalog_recovery_owner
to rman.
also I hv created a catalogue using this command
create catalogue tablespace rcvcat;
(no error logs generated)
2)now when I try to connect to the catalogue I am getting an
error
what I did is, I tried connecting to rman of target database
(FAST database)
% rman target /catalog rman/rman@rcat
Recovery Manager: Release 8.1.6.0.0 - Production
RMAN-06005: connected to target database: FAST (DBID=3819569154)
RMAN-06008: connected to recovery catalog database
RMAN-06428: recovery catalog is not installed
also I tried like this,
% rman target system/manager@fast catalog rman/rman@rcat
Recovery Manager: Release 8.1.6.0.0 - Production
RMAN-06005: connected to target database: FAST (DBID=3819569154)
RMAN-06008: connected to recovery catalog database
RMAN-06428: recovery catalog is not installed
I dont understand why it says recovery catalog not installed ,
when I hv created one in rcat database.
Can anyone help me how to connect to catalog and register my
database (I mean from which machine I need to run the commands)
Thanks
VenkatYou do have a problem. It seems your "Shift" key is stuck.
Anyway, please read: [ID 188682.1],
Have a nice day. -
10g recovery catalog db dont support 11g db
Wondering 9i and 10g recovery catalogs dont support 11g db? and if i make 11g as recovery catalog it will support 9i and 10g right?
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of register command on default channel at 10/19/2010 12:19:5
8
RMAN-10015: error compiling PL/SQL program
RMAN-10033: error during compilation of job step 1: ORA-04023: Object RCAT.DBMS_
RCVCAT could not be validated or authorized
i'm having the issue below after upgrading 10.1.0 catalog database to 11g by running upgrade catalog twice....
but hitting the above error. Any idea why? -
Recovery Catalog showing wrong Archive Destination
Hi All,
I am using Oracle 10g on Solaris 10.
The problem I am facing is this, while taking backup using recover catalog..............
Starting backup at 27-JUL-11
current log archived
released channel: ch00
released channel: ch01
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 07/27/2011 11:16:47
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /u01/oracle/product/10.2.0/db_1/dbs/arch1_56_757089402.dbf
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
This is because of the following reason
RMAN> list archivelog all;
List of Archived Log Copies
Key Thrd Seq S Low Time Name
39401 1 1567 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1567_756523261.dbf
39402 1 1568 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1568_756523261.dbf
39403 1 1569 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1569_756523261.dbf
39404 1 1570 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1570_756523261.dbf
39405 1 1571 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1571_756523261.dbf
39406 1 1572 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1572_756523261.dbf
39407 1 1573 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1573_756523261.dbf
39408 1 1574 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1574_756523261.dbf
39409 1 1575 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1575_756523261.dbf
39410 1 1576 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1576_756523261.dbf
39411 1 1577 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1577_756523261.dbf
39412 1 1578 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1578_756523261.dbf
39413 1 1579 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1579_756523261.dbf
39414 1 1580 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1580_756523261.dbf
39415 1 1581 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1581_756523261.dbf
39416 1 1582 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1582_756523261.dbf
39417 1 1583 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1583_756523261.dbf
39418 1 1584 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1584_756523261.dbf
39419 1 1585 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1585_756523261.dbf
39420 1 1586 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1586_756523261.dbf
39421 1 1587 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1587_756523261.dbf
39422 1 1588 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1588_756523261.dbf
39423 1 1589 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1589_756523261.dbf
39424 1 1590 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1590_756523261.dbf
39425 1 1591 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1591_756523261.dbf
39426 1 1592 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1592_756523261.dbf
39427 1 1593 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1593_756523261.dbf
39428 1 1594 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1594_756523261.dbf
39429 1 1595 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1595_756523261.dbf
39430 1 1596 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1596_756523261.dbf
39431 1 1597 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1597_756523261.dbf
39432 1 1598 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1598_756523261.dbf
39433 1 1599 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1599_756523261.dbf
39434 1 1600 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1600_756523261.dbf
39435 1 1601 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1601_756523261.dbf
39436 1 1602 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1602_756523261.dbf
39437 1 1603 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1603_756523261.dbf
39438 1 1604 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1604_756523261.dbf
39439 1 1605 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1605_756523261.dbf
39440 1 1606 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1606_756523261.dbf
39441 1 1607 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1607_756523261.dbf
39442 1 1608 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1608_756523261.dbf
39443 1 1609 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1609_756523261.dbf
39444 1 1610 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1610_756523261.dbf
39445 1 1611 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1611_756523261.dbf
39446 1 1612 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1612_756523261.dbf
39447 1 1613 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1613_756523261.dbf
39448 1 1614 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1614_756523261.dbf
39449 1 1615 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1615_756523261.dbf
39450 1 1616 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1616_756523261.dbf
39451 1 1617 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1617_756523261.dbf
39452 1 1618 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1618_756523261.dbf
39453 1 1619 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1619_756523261.dbf
39454 1 1620 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1620_756523261.dbf
39455 1 1621 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1621_756523261.dbf
39456 1 1622 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1622_756523261.dbf
39457 1 1623 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1623_756523261.dbf
39458 1 1624 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1624_756523261.dbf
39459 1 1625 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1625_756523261.dbf
39460 1 1626 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1626_756523261.dbf
39461 1 1627 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1627_756523261.dbf
39462 1 1628 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1628_756523261.dbf
39463 1 1629 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1629_756523261.dbf
39464 1 1630 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1630_756523261.dbf
39465 1 1631 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1631_756523261.dbf
39466 1 1632 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1632_756523261.dbf
39467 1 1633 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1633_756523261.dbf
39468 1 1634 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1634_756523261.dbf
39469 1 1635 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1635_756523261.dbf
39470 1 1636 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1636_756523261.dbf
39471 1 1637 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1637_756523261.dbf
39682 1 1638 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1638_756523261.dbf
39689 1 1639 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1639_756523261.dbf
40642 1 1640 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1640_756523261.dbf
40643 1 1641 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1641_756523261.dbf
40644 1 1642 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1642_756523261.dbf
40645 1 1643 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1643_756523261.dbf
40646 1 1644 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1644_756523261.dbf
40647 1 1645 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1645_756523261.dbf
40648 1 1646 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1646_756523261.dbf
41310 1 1647 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1647_756523261.dbf
41317 1 1648 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1648_756523261.dbf
41373 1 1649 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1649_756523261.dbf
41374 1 1650 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1650_756523261.dbf
41375 1 1651 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1651_756523261.dbf
41383 1 1652 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1652_756523261.dbf
*38725 1 56 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_56_757089402.dbf*
*38946 1 57 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_57_757089402.dbf*
*39000 1 58 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_58_757089402.dbf*
*39022 1 59 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_59_757089402.dbf*
*39243 1 60 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_60_757089402.dbf*
*39297 1 61 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_61_757089402.dbf*
*39703 1 62 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_62_757089402.dbf*
*39704 1 63 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_63_757089402.dbf*
*39705 1 64 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_64_757089402.dbf*
*39933 1 65 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_65_757089402.dbf*
*39991 1 66 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_66_757089402.dbf*
*40023 1 67 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_67_757089402.dbf*
*40024 1 68 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_68_757089402.dbf*
*40025 1 69 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_69_757089402.dbf*
*40254 1 70 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_70_757089402.dbf*
*40308 1 71 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_71_757089402.dbf*
*40345 1 72 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_72_757089402.dbf*
*40570 1 73 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_73_757089402.dbf*
*41329 1 74 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_74_757089402.dbf*
I dont know from where recovery catalog is getting the information in bold.
I have crosschecked and deleted archives and resynced the catalog several times. Immediatly after doing that the backup works fine, but the other day its the same thing all over again.
Can some one tell me from where the catalog is getting this wrong infomation about archivelogs???
By the way here is some more info about my target Database:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oradb2/Archive/HCSPRD91
Oldest online log sequence 1651
Next log sequence to archive 1653
Current log sequence 1653
NAME TYPE VALUE
archive_lag_target integer 0
log_archive_config string
log_archive_dest string
log_archive_dest_1 string LOCATION=/oradb2/Archive/HCSPR
D91
log_archive_dest_10 string
log_archive_dest_2 string
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
NAME TYPE VALUE
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string enable
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string enable
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
NAME TYPE VALUE
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string %t_%s_%r.dbf
log_archive_local_first boolean TRUE
log_archive_max_processes integer 2
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
remote_archive_enable string true
standby_archive_dest string ?/dbs/arch
Regards .....Do you have any other DBs with the same DBID as the one you are backing up? Are they connect to the same RMAN catalog?
Iordan Iotzov
http://iiotzov.wordpress.com/ -
Good Morning All,
One of our RMAN backups is failing with the following error message. Any suggestions would be greatly appreciated.
==================================================================================================
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Edited by: ORA_UMAIR on Dec 31, 2008 7:51 AMThis Oracle Database is 9.2.0.6.0. Here is the complete log file. The RMAN script that I am using ran successfully many times before.
====================================================================================================
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to recovery catalog database
RMAN>
connected to target database: CUSTPR (DBID=525071053)
RMAN>
RMAN> #########################################################################
2> # LEVEL 0 BACKUP #
3> #########################################################################
4>
5> # Configure backups to be written to disk.
6> CONFIGURE DEFAULT DEVICE TYPE TO DISK;
old RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Set the retention policy to a recovery window of 7 days. This ensures that
2> # RMAN retains all backups needed to recover the database to any point in time
3> # in the last 7 days. You can use the DELETE OBSOLETE command to delete
4> # backups that are no longer required by the retention policy. To exclude a
5> # backup from consideration by the policy, you can use KEEP option with the
6> # BACKUP command.
7> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to use two disk channels for backup, restore, recovery, and
2> # maintenance operations.
3> CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write disk backups to the /backup directory.
2> # The format specifier %t is replaced with a 4-byte timestamp, %s with the
3> # backup set number, and %p with the backup piece number.
4> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to back up the control file after each backup.
2> CONFIGURE CONTROLFILE AUTOBACKUP ON;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write controlfile autobackups to the /backup directory.
2> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Enable the backup optimization feature introduced in 9i to make sure that
2> # RMAN won't backup an archivelog or datafile if there already exists a backup
3> # of that file. The FORCE option can be used to override optimization on a
4> # specific BACKUP command.
5> CONFIGURE BACKUP OPTIMIZATION ON;
old RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Use the SHOW ALL command to see the current configuration settings.
2> SHOW ALL ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '%d_bkp_cf%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1;
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' FORMAT '%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/orahome2/custprdb/9.2.0/dbs/snapcf_custpr.f'; # default
RMAN>
RMAN> # The following commands are run each day to start the backup cycle.
2> # The steps are:
3> # - Take an incremental level 0 backup of the database. A level 0 backup is
4> # a complete backup of the entire file which can be used as the basis
5> # for a subsequent incremental backup.
6> # - Backup all archivelogs that have not already been backed up.
7> # - Delete on-disk archivelogs older than seven days.
8>
9> BACKUP INCREMENTAL LEVEL 0 FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p'
10> DATABASE maxsetsize 33G
11> PLUS ARCHIVELOG FORMAT '/backups/admin/custpr/%d_bkp_al%t_Set%s_Piece%p'
12> delete all input;
Starting backup at 12/30/2008 22:01:40
current log archived
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=8008 recid=7910 stamp=674638862
input archive log thread=1 sequence=8009 recid=7911 stamp=674671207
input archive log thread=1 sequence=8010 recid=7912 stamp=674697380
input archive log thread=1 sequence=8011 recid=7913 stamp=674780433
input archive log thread=1 sequence=8012 recid=7914 stamp=674784211
input archive log thread=1 sequence=8013 recid=7915 stamp=674863288
input archive log thread=1 sequence=8014 recid=7916 stamp=674863300
channel ORA_DISK_1: starting piece 1 at 12/30/2008 22:01:41
channel ORA_DISK_1: finished piece 1 at 12/30/2008 22:03:47
piece handle=/backups/admin/custpr/CUSTPR_bkp_al674863300_Set3083_Piece1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:02:07
channel ORA_DISK_1: deleting archive log(s)
archive log filename=/custpr/arch/arch_custpr_8008.log recid=7910 stamp=674638862
archive log filename=/custpr/arch/arch_custpr_8009.log recid=7911 stamp=674671207
archive log filename=/custpr/arch/arch_custpr_8010.log recid=7912 stamp=674697380
archive log filename=/custpr/arch/arch_custpr_8011.log recid=7913 stamp=674780433
archive log filename=/custpr/arch/arch_custpr_8012.log recid=7914 stamp=674784211
archive log filename=/custpr/arch/arch_custpr_8013.log recid=7915 stamp=674863288
archive log filename=/custpr/arch/arch_custpr_8014.log recid=7916 stamp=674863300
Finished backup at 12/30/2008 22:03:47
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Recovery Manager complete. -
How to install the Recovery Catalog
Hi:
How to install the recovery catalog? I used the following commands from the menu and it didn't work:
connect rman/rman
@?/rdbms/admin/catrman
There is no catrman.sql exists.
Thank you very much.If you are using Oracle8i, make sure your compatibility is set to at least 8.1.0 and you are connected to the catalog database. Then type create catalog; at the RMAN command line.
-
Oracle 10g express edition recovery catalog
whether oracle 10g express edition spoort recovery catalog?
Yes you can; the answer is in the manual.
>
In general, the rules of RMAN compatibility are as follows:
<li>You can create 8.X or 9.X RMAN catalog schema in any Oracle database release 8.1.X (or higher) and Release 10g RMAN catalog schema in any Oracle database release 9.0.1 (or higher).</li>
<li>The recovery catalog schema version must be greater than or equal to the RMAN client version.</li>
<li>Ideally, the versions of the RMAN client and the target database should be the same (although there are other legal combinations, listed in Table B-1).</li>
<li>While backing up a Release 10g database using the 9.X RMAN client, you cannot include a controlfile that was created using compatible=10.0.0 in a datafile backupset. The workaround is to turn controlfile autobackup ON.</li>
>
http://download.oracle.com/docs/cd/B12037_01/server.101/b10770/compat.htm
http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/backrest.htm#i1004902
XE questions are best answered here {forum:id=251}
Regards,
Phiri
Edited by: phiri on 02-Apr-2010 01:36 -
Oracle 10.2.0.4 RMAN Duplicate without a Recovery Catalog
Production Backups are Tuesday - Sunday at 22:00:
RUN {
ALLOCATE CHANNEL c1 DEVICE TYPE DISK;
CROSSCHECK ARCHIVELOG ALL;
CROSSCHECK BACKUP;
DELETE NOPROMPT COPY OF ARCHIVELOG ALL COMPLETED BEFORE 'SYSDATE-2';
DELETE NOPROMPT BACKUP;
BACKUP DATABASE PLUS ARCHIVELOG;
CROSSCHECK BACKUP;
RELEASE CHANNEL c1;
LIST BACKUPSET;
EOF
I have these files sent over to the development server on Wednesday, RMANbackup (log), backupset and the controlfile:
rcp -rp /backup/$1/flash_recovery/$2/RMANbackup/* kacdb4:/backup/common/flash_recovery/$2/RMANbackup
rcp -rp /backup/$1/flash_recovery/$2/backupset/* kacdb4:/backup/common/flash_recovery/$2/backupset
rcp -rp /backup/$1/flash_recovery/$2/controlfile/* kacdb4:/backup/common/flash_recovery/$2/controlfile
I run the RMAN Duplicate and the database gets created with no problems!
The question is: If I wait unit Thursday, to run the duplicate script, I get the traditional RMAN errors: RMAN-03002, RMAN-03015, RMAN-06026, RMAN-06023:
Starting restore at 20-SEP-12
released channel: aux1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/20/2012 10:05:36
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Recovery Manager complete.
Is this because of the 'SYSDATE-2' in the RMAN runlist? Does RMAN connect back to the target and it does not find the logs, because they've been deleted, it aborts the duplicate? I've shipped over the backupset and controlfile of the scn I'm using in the duplicate runlist all is there? If I'm trying to cleanup the archive area, would'nt 'delete expired archivelog all' in my runlist, be better than using the 'SYSDATE-2'?
Or is it because of this database parameter:
control_file_record_keep_time= 7, should I set this to say 14?
Is it one of these RMAN configurations:
Retention Policy to Redundancy 1, should I set this to say 7?
Datafile Backup Copies for Device Type Disk to 1, to say 3, this takes up disk space which is precious
Archivelog Backup Copies for Device Type Disk to 1, to say 3, this takes up disk space too
Archive deletion policy to none change this to the other option?
I've tested this a few times now, and always fails if the dupicate is not done the next day.
If I have to create a development database on a Friday from Tuesday's copy FROM TAPE, I will get the error, because the files are no longer on disk.
What can I do to ensure that I can create an RMAN duplicate any day of the week from Tuesday to Sunday?
Look forward to your answer.
Please let me know if I left any details out that you may need.
Sincerely,
Elizabeth BurnsHi Valentin,
Here is the good duplicate log from Monday 9/24:
oracle:dupdb@kacdb4:/u01/app/oracle/KAC_SCRIPTS/dupdb/logs-> more clone_database_from_common_20120924.log
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Sep 24 18:07:32 2012
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected.
SQL> spool /u01/app/oracle/KAC_SCRIPTS/dupdb/logs/DBShutdown.log
SQL> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> spool off
SQL> exit;
Disconnected from Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Sep 24 18:07:41 2012
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
File created.
ORACLE instance started.
Total System Global Area 134217728 bytes
Fixed Size 2054448 bytes
Variable Size 79693520 bytes
Database Buffers 50331648 bytes
Redo Buffers 2138112 bytes
Disconnected from Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
Recovery Manager: Release 10.2.0.4.0 - Production on Mon Sep 24 18:07:43 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: KEDSP (DBID=3370721566)
connected to auxiliary database: DUPDB (not mounted)
RMAN> RUN
2> {
3> ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
4>
5> set until scn 211054288;
6> DUPLICATE TARGET DATABASE TO dupdb
7> PFILE=/u01/app/oracle/product/10.2.0/db_1/dbs/initdupdb.ora
8> DB_FILE_NAME_CONVERT=('/usr/local/OLlinks/kedsp/system/','/usr/local/OLlinks/dupdb/system/','/usr/local/OLlinks/kedsp/temp/','/us
r/local/OLlinks/dupdb/temp/','/usr/local/OLlinks/kedsp/data01/','/usr/local/OLlinks/dupdb/data01/','/usr/local/OLlinks/kedsp/index01
/','/usr/
9> local/OLlinks/dupdb/index01/')
10> LOGFILE
11> GROUP 1 (
12> '/usr/local/OLlinks/dupdb/redo01/redo0101.log',
13> '/usr/local/OLlinks/dupdb/redo02/redo0102.log',
14> '/usr/local/OLlinks/dupdb/redo03/redo0103.log'
15> ) SIZE 50M,
16> GROUP 2 (
17> '/usr/local/OLlinks/dupdb/redo01/redo0201.log',
18> '/usr/local/OLlinks/dupdb/redo02/redo0202.log',
19> '/usr/local/OLlinks/dupdb/redo03/redo0203.log'
20> ) SIZE 50M,
21> GROUP 3 (
22> '/usr/local/OLlinks/dupdb/redo01/redo0301.log',
23> '/usr/local/OLlinks/dupdb/redo02/redo0302.log',
24> '/usr/local/OLlinks/dupdb/redo03/redo0303.log'
25> ) SIZE 50M,
26> GROUP 4 (
27> '/usr/local/OLlinks/dupdb/redo01/redo0401.log',
28> '/usr/local/OLlinks/dupdb/redo02/redo0402.log',
29> '/usr/local/OLlinks/dupdb/redo03/redo0403.log'
30> ) SIZE 50M,
31> GROUP 5 (
32> '/usr/local/OLlinks/dupdb/redo01/redo0501.log',
33> '/usr/local/OLlinks/dupdb/redo02/redo0502.log',
34> '/usr/local/OLlinks/dupdb/redo03/redo0503.log'
35> ) SIZE 50M,
36> GROUP 6 (
37> '/usr/local/OLlinks/dupdb/redo01/redo0601.log',
38> '/usr/local/OLlinks/dupdb/redo02/redo0602.log',
39> '/usr/local/OLlinks/dupdb/redo03/redo0603.log'
40> ) SIZE 50M,
41> GROUP 7 (
42> '/usr/local/OLlinks/dupdb/redo01/redo0701.log',
43> '/usr/local/OLlinks/dupdb/redo02/redo0702.log',
44> '/usr/local/OLlinks/dupdb/redo03/redo0703.log'
45> ) SIZE 50M,
46> GROUP 8 (
47> '/usr/local/OLlinks/dupdb/redo01/redo0801.log',
48> '/usr/local/OLlinks/dupdb/redo02/redo0802.log',
49> '/usr/local/OLlinks/dupdb/redo03/redo0803.log'
50> ) SIZE 50M,
51> GROUP 9 (
52> '/usr/local/OLlinks/dupdb/redo01/redo0901.log',
53> '/usr/local/OLlinks/dupdb/redo02/redo0902.log',
54> '/usr/local/OLlinks/dupdb/redo03/redo0903.log'
55> ) SIZE 50M,
56> GROUP 10 (
57> '/usr/local/OLlinks/dupdb/redo01/redo1001.log',
58> '/usr/local/OLlinks/dupdb/redo02/redo1002.log',
59> '/usr/local/OLlinks/dupdb/redo03/redo1003.log'
60> ) SIZE 50M
61> ;
62> }
63>
using target database control file instead of recovery catalog
allocated channel: aux1
channel aux1: sid=242 devtype=DISK
executing command: SET until clause
Starting Duplicate Db at 24-SEP-12
contents of Memory Script:
set until scn 211054288;
set newname for datafile 1 to
"/usr/local/OLlinks/dupdb/system/system01.dbf";
set newname for datafile 2 to
"/usr/local/OLlinks/dupdb/system/undotbs01.dbf";
set newname for datafile 3 to
"/usr/local/OLlinks/dupdb/system/sysaux01.dbf";
set newname for datafile 4 to
"/usr/local/OLlinks/dupdb/system/users01.dbf";
set newname for datafile 5 to
"/usr/local/OLlinks/dupdb/data01/data1.dbf";
set newname for datafile 6 to
"/usr/local/OLlinks/dupdb/index01/index1.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 24-SEP-12
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /usr/local/OLlinks/dupdb/system/system01.dbf
restoring datafile 00002 to /usr/local/OLlinks/dupdb/system/undotbs01.dbf
restoring datafile 00003 to /usr/local/OLlinks/dupdb/system/sysaux01.dbf
restoring datafile 00004 to /usr/local/OLlinks/dupdb/system/users01.dbf
restoring datafile 00005 to /usr/local/OLlinks/dupdb/data01/data1.dbf
restoring datafile 00006 to /usr/local/OLlinks/dupdb/index01/index1.dbf
channel aux1: reading from backup piece /usr/local/OLlinks/kedsp/flash_recovery/KEDSP/backupset/2012_09_24/o1_mf_nnndf_TAG20120924T1
01837_860txxs8_.bkp
channel aux1: restored backup piece 1
piece handle=/usr/local/OLlinks/kedsp/flash_recovery/KEDSP/backupset/2012_09_24/o1_mf_nnndf_TAG20120924T101837_860txxs8_.bkp tag=TAG
20120924T101837
channel aux1: restore complete, elapsed time: 00:00:47
Finished restore at 24-SEP-12
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "DUPDB" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 584
LOGFILE
GROUP 1 ( '/usr/local/OLlinks/dupdb/redo01/redo0101.log', '/usr/local/OLlinks/dupdb/redo02/redo0102.log', '/usr/local/OLlinks/dup
db/redo03/redo0103.log' ) SIZE 50 M ,
GROUP 2 ( '/usr/local/OLlinks/dupdb/redo01/redo0201.log', '/usr/local/OLlinks/dupdb/redo02/redo0202.log', '/usr/local/OLlinks/dup
db/redo03/redo0203.log' ) SIZE 50 M ,
GROUP 3 ( '/usr/local/OLlinks/dupdb/redo01/redo0301.log', '/usr/local/OLlinks/dupdb/redo02/redo0302.log', '/usr/local/OLlinks/dup
db/redo03/redo0303.log' ) SIZE 50 M ,
GROUP 4 ( '/usr/local/OLlinks/dupdb/redo01/redo0401.log', '/usr/local/OLlinks/dupdb/redo02/redo0402.log', '/usr/local/OLlinks/dup
db/redo03/redo0403.log' ) SIZE 50 M ,
GROUP 5 ( '/usr/local/OLlinks/dupdb/redo01/redo0501.log', '/usr/local/OLlinks/dupdb/redo02/redo0502.log', '/usr/local/OLlinks/dup
db/redo03/redo0503.log' ) SIZE 50 M ,
GROUP 6 ( '/usr/local/OLlinks/dupdb/redo01/redo0601.log', '/usr/local/OLlinks/dupdb/redo02/redo0602.log', '/usr/local/OLlinks/dup
db/redo03/redo0603.log' ) SIZE 50 M ,
GROUP 7 ( '/usr/local/OLlinks/dupdb/redo01/redo0701.log', '/usr/local/OLlinks/dupdb/redo02/redo0702.log', '/usr/local/OLlinks/dup
db/redo03/redo0703.log' ) SIZE 50 M ,
GROUP 8 ( '/usr/local/OLlinks/dupdb/redo01/redo0801.log', '/usr/local/OLlinks/dupdb/redo02/redo0802.log', '/usr/local/OLlinks/dup
db/redo03/redo0803.log' ) SIZE 50 M ,
GROUP 9 ( '/usr/local/OLlinks/dupdb/redo01/redo0901.log', '/usr/local/OLlinks/dupdb/redo02/redo0902.log', '/usr/local/OLlinks/dup
db/redo03/redo0903.log' ) SIZE 50 M ,
GROUP 10 ( '/usr/local/OLlinks/dupdb/redo01/redo1001.log', '/usr/local/OLlinks/dupdb/redo02/redo1002.log', '/usr/local/OLlinks/dup
db/redo03/redo1003.log' ) SIZE 50 M
DATAFILE
'/usr/local/OLlinks/dupdb/system/system01.dbf'
CHARACTER SET WE8ISO8859P1
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=794858918 filename=/usr/local/OLlinks/dupdb/system/undotbs01.dbf
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=794858918 filename=/usr/local/OLlinks/dupdb/system/sysaux01.dbf
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=794858918 filename=/usr/local/OLlinks/dupdb/system/users01.dbf
datafile 5 switched to datafile copy
input datafile copy recid=4 stamp=794858918 filename=/usr/local/OLlinks/dupdb/data01/data1.dbf
datafile 6 switched to datafile copy
input datafile copy recid=5 stamp=794858918 filename=/usr/local/OLlinks/dupdb/index01/index1.dbf
contents of Memory Script:
set until scn 211054288;
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 24-SEP-12
starting media recovery
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=1403
channel aux1: reading from backup piece /usr/local/OLlinks/kedsp/flash_recovery/KEDSP/backupset/2012_09_24/o1_mf_annnn_TAG20120924T1
01923_860tzfd7_.bkp
channel aux1: restored backup piece 1
piece handle=/usr/local/OLlinks/kedsp/flash_recovery/KEDSP/backupset/2012_09_24/o1_mf_annnn_TAG20120924T101923_860tzfd7_.bkp tag=TAG
20120924T101923
channel aux1: restore complete, elapsed time: 00:00:05
archive log filename=/usr/local/OLlinks/dupdb/flash_recovery/DUPDB/archivelog/2012_09_24/o1_mf_1_1403_861phcc3_.arc thread=1 sequenc
e=1403
channel clone_default: deleting archive log(s)
archive log filename=/usr/local/OLlinks/dupdb/flash_recovery/DUPDB/archivelog/2012_09_24/o1_mf_1_1403_861phcc3_.arc recid=1 stamp=79
4858923
media recovery complete, elapsed time: 00:00:02
Finished recover at 24-SEP-12
contents of Memory Script:
shutdown clone;
startup clone nomount pfile= '/u01/app/oracle/product/10.2.0/db_1/dbs/initdupdb.ora';
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 134217728 bytes
Fixed Size 2054448 bytes
Variable Size 79693520 bytes
Database Buffers 50331648 bytes
Redo Buffers 2138112 bytes
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "DUPDB" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 584
LOGFILE
GROUP 1 ( '/usr/local/OLlinks/dupdb/redo01/redo0101.log', '/usr/local/OLlinks/dupdb/redo02/redo0102.log', '/usr/local/OLlinks/dup
db/redo03/redo0103.log' ) SIZE 50 M ,
GROUP 2 ( '/usr/local/OLlinks/dupdb/redo01/redo0201.log', '/usr/local/OLlinks/dupdb/redo02/redo0202.log', '/usr/local/OLlinks/dup
db/redo03/redo0203.log' ) SIZE 50 M ,
GROUP 3 ( '/usr/local/OLlinks/dupdb/redo01/redo0301.log', '/usr/local/OLlinks/dupdb/redo02/redo0302.log', '/usr/local/OLlinks/dup
db/redo03/redo0303.log' ) SIZE 50 M ,
GROUP 4 ( '/usr/local/OLlinks/dupdb/redo01/redo0401.log', '/usr/local/OLlinks/dupdb/redo02/redo0402.log', '/usr/local/OLlinks/dup
db/redo03/redo0403.log' ) SIZE 50 M ,
GROUP 5 ( '/usr/local/OLlinks/dupdb/redo01/redo0501.log', '/usr/local/OLlinks/dupdb/redo02/redo0502.log', '/usr/local/OLlinks/dup
db/redo03/redo0503.log' ) SIZE 50 M ,
GROUP 6 ( '/usr/local/OLlinks/dupdb/redo01/redo0601.log', '/usr/local/OLlinks/dupdb/redo02/redo0602.log', '/usr/local/OLlinks/dup
db/redo03/redo0603.log' ) SIZE 50 M ,
GROUP 7 ( '/usr/local/OLlinks/dupdb/redo01/redo0701.log', '/usr/local/OLlinks/dupdb/redo02/redo0702.log', '/usr/local/OLlinks/dup
db/redo03/redo0703.log' ) SIZE 50 M ,
GROUP 8 ( '/usr/local/OLlinks/dupdb/redo01/redo0801.log', '/usr/local/OLlinks/dupdb/redo02/redo0802.log', '/usr/local/OLlinks/dup
db/redo03/redo0803.log' ) SIZE 50 M ,
GROUP 9 ( '/usr/local/OLlinks/dupdb/redo01/redo0901.log', '/usr/local/OLlinks/dupdb/redo02/redo0902.log', '/usr/local/OLlinks/dup
db/redo03/redo0903.log' ) SIZE 50 M ,
GROUP 10 ( '/usr/local/OLlinks/dupdb/redo01/redo1001.log', '/usr/local/OLlinks/dupdb/redo02/redo1002.log', '/usr/local/OLlinks/dup
db/redo03/redo1003.log' ) SIZE 50 M
DATAFILE
'/usr/local/OLlinks/dupdb/system/system01.dbf'
CHARACTER SET WE8ISO8859P1
contents of Memory Script:
set newname for tempfile 1 to
"/usr/local/OLlinks/dupdb/temp/temp01.dbf";
switch clone tempfile all;
catalog clone datafilecopy "/usr/local/OLlinks/dupdb/system/undotbs01.dbf";
catalog clone datafilecopy "/usr/local/OLlinks/dupdb/system/sysaux01.dbf";
catalog clone datafilecopy "/usr/local/OLlinks/dupdb/system/users01.dbf";
catalog clone datafilecopy "/usr/local/OLlinks/dupdb/data01/data1.dbf";
catalog clone datafilecopy "/usr/local/OLlinks/dupdb/index01/index1.dbf";
switch clone datafile all;
executing Memory Script
executing command: SET NEWNAME
renamed temporary file 1 to /usr/local/OLlinks/dupdb/temp/temp01.dbf in control file
cataloged datafile copy
datafile copy filename=/usr/local/OLlinks/dupdb/system/undotbs01.dbf recid=1 stamp=794858932
cataloged datafile copy
datafile copy filename=/usr/local/OLlinks/dupdb/system/sysaux01.dbf recid=2 stamp=794858932
cataloged datafile copy
datafile copy filename=/usr/local/OLlinks/dupdb/system/users01.dbf recid=3 stamp=794858932
cataloged datafile copy
datafile copy filename=/usr/local/OLlinks/dupdb/data01/data1.dbf recid=4 stamp=794858932
cataloged datafile copy
datafile copy filename=/usr/local/OLlinks/dupdb/index01/index1.dbf recid=5 stamp=794858932
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=794858932 filename=/usr/local/OLlinks/dupdb/system/undotbs01.dbf
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=794858932 filename=/usr/local/OLlinks/dupdb/system/sysaux01.dbf
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=794858932 filename=/usr/local/OLlinks/dupdb/system/users01.dbf
datafile 5 switched to datafile copy
input datafile copy recid=4 stamp=794858932 filename=/usr/local/OLlinks/dupdb/data01/data1.dbf
datafile 6 switched to datafile copy
input datafile copy recid=5 stamp=794858932 filename=/usr/local/OLlinks/dupdb/index01/index1.dbf
contents of Memory Script:
Alter clone database open resetlogs;
executing Memory Script
database opened
Finished Duplicate Db at 24-SEP-12
Recovery Manager complete.
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Sep 24 18:09:39 2012
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected.
User altered.
User altered.
User altered.
User altered.
Database closed.
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 134217728 bytes
Fixed Size 2054448 bytes
Variable Size 79693520 bytes
Database Buffers 50331648 bytes
Redo Buffers 2138112 bytes
Database mounted.
Database altered.
Database altered.
Disconnected from Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
oracle:dupdb@kacdb4:/u01/app/oracle/KAC_SCRIPTS/dupdb/logs->
Here is the duplicate log from this morning:
oracle:dupdb@kacdb4:/u01/app/oracle/KAC_SCRIPTS/dupdb/logs-> more clone_database_from_common_20120926.log
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 26 08:28:31 2012
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected.
SQL> spool /u01/app/oracle/KAC_SCRIPTS/dupdb/logs/DBShutdown.log
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> spool off
SQL> exit;
Disconnected from Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 26 08:28:42 2012
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
File created.
ORACLE instance started.
Total System Global Area 134217728 bytes
Fixed Size 2054448 bytes
Variable Size 79693520 bytes
Database Buffers 50331648 bytes
Redo Buffers 2138112 bytes
Disconnected from Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
Recovery Manager: Release 10.2.0.4.0 - Production on Wed Sep 26 08:28:45 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: KEDSP (DBID=3370721566)
connected to auxiliary database: DUPDB (not mounted)
RMAN> RUN
2> {
3> ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
4>
5> set until scn 211054288;
6> DUPLICATE TARGET DATABASE TO dupdb
7> PFILE=/u01/app/oracle/product/10.2.0/db_1/dbs/initdupdb.ora
8> DB_FILE_NAME_CONVERT=('/usr/local/OLlinks/kedsp/system/','/usr/local/OLlinks/dupdb/system/','/usr/local/OLlinks/kedsp/temp/','/us
r/local/OLlinks/dupdb/temp/','/usr/local/OLlinks/kedsp/data01/','/usr/local/OLlinks/dupdb/data01/','/usr/local/OLlinks/kedsp/index01
/','/usr/
9> local/OLlinks/dupdb/index01/')
10> LOGFILE
11> GROUP 1 (
12> '/usr/local/OLlinks/dupdb/redo01/redo0101.log',
13> '/usr/local/OLlinks/dupdb/redo02/redo0102.log',
14> '/usr/local/OLlinks/dupdb/redo03/redo0103.log'
15> ) SIZE 50M,
16> GROUP 2 (
17> '/usr/local/OLlinks/dupdb/redo01/redo0201.log',
18> '/usr/local/OLlinks/dupdb/redo02/redo0202.log',
19> '/usr/local/OLlinks/dupdb/redo03/redo0203.log'
20> ) SIZE 50M,
21> GROUP 3 (
22> '/usr/local/OLlinks/dupdb/redo01/redo0301.log',
23> '/usr/local/OLlinks/dupdb/redo02/redo0302.log',
24> '/usr/local/OLlinks/dupdb/redo03/redo0303.log'
25> ) SIZE 50M,
26> GROUP 4 (
27> '/usr/local/OLlinks/dupdb/redo01/redo0401.log',
28> '/usr/local/OLlinks/dupdb/redo02/redo0402.log',
29> '/usr/local/OLlinks/dupdb/redo03/redo0403.log'
30> ) SIZE 50M,
31> GROUP 5 (
32> '/usr/local/OLlinks/dupdb/redo01/redo0501.log',
33> '/usr/local/OLlinks/dupdb/redo02/redo0502.log',
34> '/usr/local/OLlinks/dupdb/redo03/redo0503.log'
35> ) SIZE 50M,
36> GROUP 6 (
37> '/usr/local/OLlinks/dupdb/redo01/redo0601.log',
38> '/usr/local/OLlinks/dupdb/redo02/redo0602.log',
39> '/usr/local/OLlinks/dupdb/redo03/redo0603.log'
40> ) SIZE 50M,
41> GROUP 7 (
42> '/usr/local/OLlinks/dupdb/redo01/redo0701.log',
43> '/usr/local/OLlinks/dupdb/redo02/redo0702.log',
44> '/usr/local/OLlinks/dupdb/redo03/redo0703.log'
45> ) SIZE 50M,
46> GROUP 8 (
47> '/usr/local/OLlinks/dupdb/redo01/redo0801.log',
48> '/usr/local/OLlinks/dupdb/redo02/redo0802.log',
49> '/usr/local/OLlinks/dupdb/redo03/redo0803.log'
50> ) SIZE 50M,
51> GROUP 9 (
52> '/usr/local/OLlinks/dupdb/redo01/redo0901.log',
53> '/usr/local/OLlinks/dupdb/redo02/redo0902.log',
54> '/usr/local/OLlinks/dupdb/redo03/redo0903.log'
55> ) SIZE 50M,
56> GROUP 10 (
57> '/usr/local/OLlinks/dupdb/redo01/redo1001.log',
58> '/usr/local/OLlinks/dupdb/redo02/redo1002.log',
59> '/usr/local/OLlinks/dupdb/redo03/redo1003.log'
60> ) SIZE 50M
61> ;
62> }
63>
using target database control file instead of recovery catalog
allocated channel: aux1
channel aux1: sid=242 devtype=DISK
executing command: SET until clause
Starting Duplicate Db at 26-SEP-12
contents of Memory Script:
set until scn 211054288;
set newname for datafile 1 to
"/usr/local/OLlinks/dupdb/system/system01.dbf";
set newname for datafile 2 to
"/usr/local/OLlinks/dupdb/system/undotbs01.dbf";
set newname for datafile 3 to
"/usr/local/OLlinks/dupdb/system/sysaux01.dbf";
set newname for datafile 4 to
"/usr/local/OLlinks/dupdb/system/users01.dbf";
set newname for datafile 5 to
"/usr/local/OLlinks/dupdb/data01/data1.dbf";
set newname for datafile 6 to
"/usr/local/OLlinks/dupdb/index01/index1.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 26-SEP-12
released channel: aux1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/26/2012 08:28:53
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Recovery Manager complete.
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 26 08:28:53 2012
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected.
alter user sys identified by "Sco_tch!1"
ERROR at line 1:
ORA-01109: database not open
alter user system identified by "Sco_tch!1"
ERROR at line 1:
ORA-01109: database not open
alter user dbsnmp identified by "Sco_tch!1"
ERROR at line 1:
ORA-01109: database not open
alter user sysman identified by "Sco_tch!1"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 134217728 bytes
Fixed Size 2054448 bytes
Variable Size 79693520 bytes
Database Buffers 50331648 bytes
Redo Buffers 2138112 bytes
ORA-00205: error in identifying control file, check alert log for more info
alter database noarchivelog
ERROR at line 1:
ORA-01507: database not mounted
alter database open
ERROR at line 1:
ORA-01507: database not mounted
Disconnected from Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
oracle:dupdb@kacdb4:/u01/app/oracle/KAC_SCRIPTS/dupdb/logs->
Please let me know if you need anything else.
Sincerely,
Elizabeth -
Oracle RMAN recovery catalog database in a Primary and Standby mode
Hello All,
The customer wants the RMAN recovery catalog database to be highly available so that none of the RMAN database backup jobs are impacted at the time of taking the database backups. There are are 200+ databases running on OEL, RHEL and Windows. So we planned to host the recovery catalog database on Oracle Active DataGuard 11.2.0.1 Enterprise Edition on RedHat EL 5.8 version on two physical servers. The Primary Instance will be in one server in the Primary DC and the Standby Instance will be on another server in another DC. Also all the database datafiles are hosted in ASM Diskgroups on SAN (DATA, FRA, REDO, ARCH diskgroups).
Are there any specific RPM/patch/OS user custom/specific settings or configurations needed..?
Thanks in advance..
Regards,
Abhijit"The customer wants the RMAN recovery catalog database to be highly available so that none of the RMAN database backup jobs are impacted at the time of taking the database backups"
Hi,
i think you can achieve HA for the catalog DB. (Rac and Asm should work fine)
There's no way (afaik) to use TAF with the rman backup. If you have a failure during a backup it simply fails.
There is no TAF in this situation.
Hope this helps.
Regs,
Drew -
Backup policy on Grid, using RMAN and Recovery Catalog.
Hello Gurus,
I'm trying to move ahead the new features of Oracle 10g in my company. So I've already created Grid Control and will deploy Agents/Targets during the next week. I also want to switch the backup process from the archaic exp/imp to RMAN with the Recovery Catalog.
My question is such: could anybody suggest the best book or text with solutions and descriptions of backup policy, using the Grid, RMAN and Catalog? What I want to do is to create eventually the powerful and centralized storage of every database in a company and do all daily routine from there. But as long as I'm only in the very beginning I want to gain some knowledge before the bad experience, like crashed recovery catalog and no backups for all databases :-)))
Definitely I'll keep existing imp/exp and hotbackup for a long time. I'm not going to substitute all our backup strategy with one catalog. I just want to understand what will be the best practice in the backup perspective.
And at all, I wonder if you please could give me very brief answer to this question: Let's say I have a huge monster with 5 disks by 500Gb RAD0+1. Is it a bad idea to store all of them in one physical machine before they will tape to backup or it could make sense? For me it sounds a bit scary, but probably if all made with the brain it's not a bad idea?
Please, send me to some valuable and good source (like Tom Kyte or Don Burleson) Unfortunately, I didn't find anything regard the backups itself. Only pretty much general thought.
Thanks a lot in advance.
M.great!
thanks a lot!
this is definitely valuable info and I'll read right away. but as far as understand they suggest to use Data Guard, Standby and RAC which are the best ways to prevent your environment from crash. But in reality (I mean in my company) nobody is going to move to RAC at this point and I'm not sure, that they will have a chance to do in the next year. they just aren't up to it.
what I'm looking for is probably some tips and hints about backups in more or less big environment, but not as big as Oracle itself :-) unfortunately, i'm the only DBA in my surrounding. i mean, i have no friends or mentors DBAs that could seat with me in a pub and pass theirs knowledge from generation to generation :-)))
but anyway, I'll devote this week-end to this link.
thanks a lot!
Maybe you are looking for
-
Zenprise software and exchange active sync is no longer working with my work email
Has anyone resolved this issue yet? I use Zenprise to allow my email to communicate with my work server. The account and set up is correctly and I reenrolled to ping the server. I discussed this with my company's support center. However, my compan
-
How can I switch one contact from SMS back to iMessage?
My mom has an iPhone. I recently tried to send her an iMessage, but it wouldn't go through and asked if I wanted to send as SMS. I clicked yes. Now, weeks later, I can't change it back to iMessage. I've deleted the history and tried to start over
-
How to auto save output with date added to file name, and email the results?
Hi, We found a script to capture disk space usage, that automatically places the results into an Excel file. We would like the script to autosave this file to a specific directroy with the date ran as part of teh file name. We would then like these r
-
Pages export to ePub and retaining italics
Is there a method to retain italics when exporting to ePub? Thanks
-
Standard Macro and Functional Module in HR -Programming.
Hi friends, Could i know the difference between a standard macro and a function module in hr programming. how do we have to use that and what are the different std macro's and functional modules used in HR-Programming... Thanks in Advance.. Regards S