Why register up-to-date has not been iwork
<Personal Information Edited By Host>
It can take a couple of days for them to process the request.
Similar Messages
-
Hello,
I am facing following issue regarding web analytic service for specific date 2014-08-18:
Verified following services which are running and status was success on that specific date 2014-08-18 :
Web Analytics Service
Microsoft Usage Data Import
Microsoft SharePoint Foundation Usage Data Processing
Observed latest Web Analytics Setting as below :
LastAggregationDateId
20140817 - The date id of the last successfully completed data aggregation
LastAggregationTime
2014-08-18T00:00:13.210 - The time of the last successfully completed data aggregation
LastBestBetSuggestionAggregationDateId
20140818 - The date id of the last successfully completed best bet suggestion data aggregation. This date id should not be reset to an earlier date manually.
LastDataCopyTime
2014-08-17T23:59:09.693 - The last time the data were copied from the staging databases to this reporting database for aggregation
Above settings says that Data has not copied from Staging DB to Reporting DB on Date 2014-08-18
In order to verify the same I have checked as follow:
SELECT COUNT (*) FROM [dbo].[WATrafficAggregationByDate] WITH (NOLOCK)
WHERE [DateId] = 20140818
Above SQL Query has returned ZERO value.
Can anyone please let me know Why data has not been copied from staging DB to Reporting DB even timer job status is success ?
Your help will be much appreciated.
Thanks and Regards,
Dipti ChhatrapatiThe image itself has the answer
The user requests a page, and the action gets picked up by the Web Analytics service that runs on SharePoint.
The Web Analytics service logs this in the “.usage” files.
A Timer job called “Microsoft SharePoint Foundation Usage Data Import” by default runs every 30 minutes. It imports the logs into the staging database.
Each night the “Microsoft SharePoint Foundation Usage Data Processing” Timer job runs and transforms the data into the reporting database.
The last run time of the import from staging and the aggregation is logged in the Settings table in the Reporting database.
Usage and Health Data Collection Service Application collects Data about Usage and Health of your farm.
This information is used for Health Monitoring and this is also required for running the Web Analytics Service. If you do not have a Usage and Health Data Collection Service Application or your
Usage and Health Data Collection Proxy is stopped, you will not see any data in the Web Analytics Report
Regards Chen V [MCTS SharePoint 2010] -
Similar to another post, I was trying to run this query in SQL Server Management Studio 2008 R2 (64 Bit) running on Surface Pro3 Windows 8.1
SELECT * FROM OPENROWSET('Microsoft.ACE.OLEDB.15.0','Excel 15.0;Database=C:\Users\File.xlsx', 'SELECT * FROM [Sheet1$]');
I got this Error:
Msg 7403, Level 16, State 1, Line 2
The OLE DB provider "Microsoft.ACE.OLEDB.15.0" has not been registered.
I realised I had 32 bit version of MS office 365 2013 installed, so un installed and re installed 64 bit and I get the same error.
How can I resolve this error or what should I check next? Thank you.Hi Dixone,
In addtion to Olaf's, the below links can help to shoot the troubles when loading excel using T-SQL.
SQL Server – Import Data from Excel using T-SQL
Questions About Using TSQL to Import Excel Data
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support -
Hello,
On the MDW Disk Usage Collection Set report, I get the following error when I click on a database hyperlink.
A data source has not been supplied for the data source DS_TraceEvents
SQL profiler shows the following SQL statements are executed (I've replaced the database name with databaseX)
1. exec sp_executesql N'SELECT
dtb.name AS [Name]
FROM
master.sys.databases AS dtb
WHERE
(dtb.name=@_msparam_0)',N'@_msparam_0 nvarchar(4000)',@_msparam_0=N'databaseX'
this returns zero rows as databaseX does not exist on my MDW central server, but is a database on a target server (i.e. one that is being monitored and uploaded into the MDW central server).
2. USE [datatbaseX]
this produces the following error:
Msg 911, Level 16, State 1, Line 1
Database 'databaseX' does not exist. Make sure that the name is entered correctly.
why is the report looking for the database on my server?
thanks
Jag
Environment: MDW (Management Data Warehouse) on SQL 2008 R2Hi Jag,
Based on my test, while this database is offline, we will encounter this issue. This is because that while we click the certain database in “Disk Usage Collection
Set” report, it will query some information with that certain database. If this database is offline, we will not access this database to acquire related information and generates this error.
Therefore I recommend that you check the status of this database by using this system view:
sys.databases. If it is not online, please execute
the following statements in a new window to make this database to be online:
USE master
GO
ALTER DATABASE <database name> SET ONLINE
GO
If anything is unclear, please let me know.
Regards,
Tom Li -
ODBC: This Datasource has not been Registered, Please register first!
Hi,
I just installed Oracle BI 10.1.3.4, and am going to demo the new interactive dashboard to my seniors. First I need to have a database to connect to, so I go to the ODBC client to define a data source. Now I'm stuck here: Under File -> Open DataBase and get the following values to fill out:
DSN:
User:
Password:
Database:
I'm trying to connect to an Oracle database, so under DSN I choose 'ODBC data sources', but get this message everytime: ODBC: This Datasource has not been Registered, Please register first!
It doesn't matter whether I fill out the other fields or not. What's the issue?
All help apprecitated.
Thanks!First and foremost: "BI 10.2.x"? BI EE hasn't reached beyond 10.1.3.4.0 yet.
Secondly: if you want to access an Oracle data source it's easiest to go over a TNSNAMES entry. Just install an Oracle client locally.
Alternatively, if you want to create an ODBC connection...that's got nothing to do with OBI, that's an OS topic. Assuming you're on a Windows box, it's the "odbccp32.cpl" which normally resides in C:\Windows\system32 that you're looking for (as you say you can't find it in your start menu).
Easy way: windows key + "R" (or Start --> Run...) --> odbccp32.cpl
Hth,
C. -
Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem? It works on the iPhone.
It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.
-
I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?
If you never bought the product then you cannot get the serial number.
-
Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.
AMDS for Windows
http://support.apple.com/kb/TS1567 -
ISE 1.2 Guest Portal - This device has not been registered.
I have setup and SSID on my WLC. I got the redirecting to my ISE guestportal working.
However when I sign in I get a Device regitration Page
"This device has not been registered"
Unable to obtain the user information needed for network access.
The device ID is grayed out and blank.
Any assistance in this matter would be greatly appreciatedThanks Johnston,
P.S for those who needs the path ISE 1.2 Administration -> Web Portal Management -> Settings -> Multi-Portal Configurations -> DefaultGuestPortal -> Operations.
On another note
When I login - I get my acceptable usage policy.
Accept
Then get a Device registration Portal where I can add the MAC address.
Now I have two quistions.
When I add my test mac address the url redirects to myservername:8443/guestportal/AfterDevReg.action - unable to connect <- that's the one issue.
The other is - Can't I by pass the MAC? ie once the user is signed on to get access.
Curretly I have the following settings enabled.
Enable Mobile Portal
Allow guest users to change password
Guest users should be allowed to do device registration <- if I disable that after signon the page just flash back to the guest portal. -
Almost every day when I open my computer I get this message:
An error occurred while reconnecting P: to \ \ JSERVER\data Microsoft Windows Network: The network path was not found. This connection has not been restored.
We then have to go through the process of resetting everything from start to finish just so I can connect to the server. There is no reason that we can find that causes this other than maybe windows updating every night. Any suggestions as to how to
fix this?it sounds like you have a network drive you are trying to map even though you are not logged in maybe in a script or task instead of backing up to :P backup to the share, make sure you have security set properly to run the task when not logged on.
I assume you are running a backup of some sort as this is the backup forum.. -
I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?
Restore iPhone with current iTunes on computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution. Of if easier for you, take receipt and iPhone, box and everything and return to where you bought it.
-
the podcast app is not fixed still wont download,did not find any solutions with anyones comments,they all have the same problem with this app.So how can you say the problem is fixed,get someone who knows how to really do something so it is not a recurring topic of frustration!!!!!
You might get more replies to this (but not from Apple, who you will recall, do not monitor these discussions) if you had posted in the Podcasts for iOS discussions, but never mind. At least in this post you've mentioned that your problem is with the Podcast App, something you didn't mention in your previous post. Consequently, my comments were based on "problems downloading Podcasts", not "problems with the new Podcast App".
(I don't use the new Podcast App, since I cannot install iOS 5 on my Touch. So I stick with the older method of listening to Podcasts on my iPod.) That said however...
It cannot have escaped Apple's attention that the new Podcast App has not been well received. Although these discussions tend to focus on what's wrong rather than what's right, it does appear that the App hasn't been well thought out.
In particular, the Auto Play feature, which - once an episode has finished playing, the "next most recent unplayed episode" will begin. Now, maybe I'm wrong but to me that means that it plays the Podcasts in reverse date order, so episode 19 will play after episode 20 and episode 18 after ep.19! That is how the iPod Classic plays Podcasts by default and the Classic forum is littered with posts from people who think this is barmy. (I think it's barmy too!)
I use an iPod Touch as well. Although not perfect, playing Podcasts on the Touch is far easier than on a Classic.
You are unlikely to find any "solutions" to the issues with the Podcast App, because the "solution" is for Apple to redesign it.
If you are assuming that the update of 25th july is a claim that it's fixed... oh dear! I notice that the App views, shown in the Store, still include that "tortoise and hare" screen with what appears to be the transport mechanism for a reel-to-reel tape deck. That alone tells me there is no real improvement to the App. It really is the worst graphic Apple have ever produced! I'll be surprised if anyone under 35 recognises that graphic as a reel-to-reel tape deck.
Actually, I have a question for you.
If you have the Podcast App installed on your Touch, does that mean that the previous method of listening to Podcasts has been removed from your iPod, or can you still access them in the Music App? If you can, abandon the Podcast App and use the old method. If not, please warn me in order that I don't purchase a new iPod Touch until Apple fix this!
Sorry I can't be the bearer of more positive news. -
RTC-5230 - Location DEV_LOC has not been registered by the current user
All,
We have recently migrated our dev environment to new hardware and I need to change the OWB Location details to reflect this - I am now attempting to unregister the locations in the Control Center but am getting the following error:
RTC-5230: Location DEV_LOC has not been registered by the current user
Is there a view I can use to find out which user registered the Location?Look at this thread (steps for unregsitering location)
Re: Unable to connect control center and start runtime service
Regards,
Oleg
PS. Before using unregister_location.sql script unregister this location in Warehouse Builder Browser (Locations Report section).
This prevent from displaying error "Location ... is registered in this repository" during execution this script -
I purchased some items from ITune store since February 3rd 2013 since then it has not been downloaded on my system.. Why?
Simple process. If an iPhone go to the Apple Store and not Verizon
the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
good luck -
I wonder why that has not been deducted the amount from my bank account
I wonder why that has not been deducted the amount from my bank account
Hello Iria,
Most unusual. I think you will need to wait a few days in case it is a bank problem.
If this situation continues you should contact Apple, after all, you don't want to be thought of as taking advantage, I'm sure. That's why you raised it in the first place.
Do keep us updated.
Thank you for the star.
Maybe you are looking for
-
getting error message "cannot prepare project for publishing (-50)" and, subsequently, it won't publish the bloody thing. I have publsihed many videos previous to this one so I have no idea waht is going on. So, my question is -- WHAT IS GOING ON?!!
-
Problem with back button with myfaces/jsf
Hi guys i have very strange kind of problem , i have a page where i am shwing tabular data with data scroller , thats work fine , in this tabbular data we are shing user infomration , and a link on user name ti see his details , this link works fine
-
Disable editable field in ALV grid using OOPS
I have following requirements, Displaying ALV grid output with most of the fields editable. Validations on data entered for each fields,for error messages Query : I want to make all the fields except the field in ERROR in display only mode similar to
-
Why system collapses, when Application is quiting from Dell Notebook PC
I implemented an stand-alone GUI application of customizing the workflow template, in which there are JDBC connetion and URLHttpConnection. All it works in PC and Ancer Notebook PC are normal , including quitting the system. But in Dell notebook PC ,
-
HT4461 iphoto won't upgrade after yosemite install
updated from snow leopard to Yosemite at suggestion of genius bar person in order to better sync with 4th gen ipad. After which iphoto needed upgrade and won't run , says wrong apple id. only have one id. loaded iphoto from ilife disk when imac was n