Why report section is appearing twice in the output of report designer

Hi Gurus,
I have created a report in the report designer and my report contains 5 sections.
each report section is one query view.
i inserted all the query views and done some formatting .
but when i executed the report , one of the report section is appearing twice in the output.
ex: i need the output like this
section1
section2
section3
section4
section5
But the output i am getting is as follows.
section1
section2
section3
section3
section4
section5
report designer experts can please let me know why this problem is coming and also please provide possible solution for this.
Thanks in advance.
Raj.

Similar Messages

GL account is appearing twice in the report

Hi Xperts,
We have a report in that particular report we can see the Balances of TOTAL COST OF SALES,Total wages & salaries,Total other staff costs,Total designing & merchantiging, Total selling, Total Depriciation,Total Distribution & TOTAL SUNDRY & GENERAL .
It is a customised report.
I am new to reports.
In the above report one GL account is appearing twice (The acct name SMALL DIFFERENCES ACCT) in the section of TOTAL COST OF SALES & TOTAL SUNDRY & GENERAL
Why it is appearing twice?
Pls. help me.
Thanks in Advance

You have not mention that which report like Z report or standard one.
However, if it is Z report, the GL may be grouped twice in the report. and ask your ABAP team to find from where it is getting value. So that, it is easy to track why it is appearing twice in the report.
If it is standard report, check your FSV for the correct grouping.
Rgds
Satheesh Vallepu

Why do my events appear twice on my ipad calendar

Why do my events appear twice in my ipad calendar

Are you syncing with itunes on the computer? If you have both sync with itunes and use icloud, that would produce duplicates.

A Characteristci appears twice under the Rows Column on the left hand side.

Hi All,
According to the requirement , there are 2 Material Numbers ,1 of them is used for Compounding,which is not required in the Report,but as it is used for Compounding ,we need to place that in the rows.
We have put tat in "NO DISPLAY" mode,but Material Number appears twice under the Rows column, on the left hand side of the screen, in the Portal when we execute the Report.How Can we have to display only 1 Material Number on the left hand side of the screen?
Thanks in Advance,
Sravani

the left hand side of the screen is reakky vague....you should be more specific...
Probably you need to filter out the compounding characteristics in the global filter area.
Thanks...
Shambhu

Loops appear twice in the loop browser. Huh?

I just installed iLife '06 and have been "messing around" with the various programmes. One thing I noticed was that exactly the same loops appear twice in the loop browser. Not all loops are doubled, which is obviously what is confusing me. Is this normal (not my confusion!!)?
I've checked the folder in the library and each loop is only available once, but GarageBand insists on having two of quite a number of loops. Any tips would be greatly appreciated, as I haven't found any way to delete just one of the loops (deleting the file obviously deletes both . . .)
Thanks in advance,
Steve
G5 Dual 2.3, G4 Powerbook Mac OS X (10.4.3)

Do you really have only one copy of each? Do a Finder/Spotlight search. There are several places where the loops could show up:
- the general Library/Audio folder
- the user Library/Audio folder
- the general Library/Application Support folder
- the User Library/Application Support folder
Did you install over an old version of GB? That might explain the duplicate loops. And the "single" loops that were either part of your old installation and not of GB3 or vice versa.
In order to repair that, you should trash the duplicate loops and the content of the Loops Index folder and then drag the remaining loops into the loop browser.

How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?

How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?
All I need is ONE INBOX (like Windows Mail used to do) ...
I can see in the 'Account' column of each message which email account it's using.
Then, I either junk or read the message, followed by delete or file to one of my created folders.
As it is, half my page is depth is taken up by 12 lines of Account names !!!

That still leaves SIX lines of Account names down the side. All I want is ONE INBOX ... (I can see which account each message belongs to in the 'Account' column...)

OutputLabes, values in selectOneChoice are appearing twice in the jspx page

Hi All,
In a Jspx Page, there are two menu tabs. Each Tab has a PanelForm and each panelform has certain components.
By default the first panelform in the first tab will be shown on page load and while clicking on second tab, the second panelform will be shown.
The first panelform has three selectonechoices and three command buttons.
If i click on reset button, these 3 selectonechoices are set to null by backing bean.
Here comes the problem, after clicking on reset, if you click on second tab where the second panel form available, certain components like outputLabel and the values in selectOnechoice, are appearing twice on the page.
Can anyone suggest me how to get rid of this problem..
Here is my Jspx Page..
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
doctype-system="http://www.w3.org/TR/html4/loose.dtd"
doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:loadBundle basename="GeneralAdmin" var="gadmin"/>
<f:loadBundle basename="HoldCapabilites" var="holdc"/>
<f:view>
<afh:html>
<afh:head title="editManualProfileAttributes">
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252"/>
<script type="text/javascript">
function cancel() {
var flag = false;
flag=window.confirm('You want to discard the entered data');
return flag;
</script>
</afh:head>
<afh:body>
<af:messages/>
<h:form>
<afh:tableLayout>
<afh:rowLayout width="100%">
<jsp:include page="/jsps/webutils/template/header.jsp"/>
</afh:rowLayout>
<afh:rowLayout>
<afh:rowLayout width="100%">
<af:menuPath>
<af:commandMenuItem text="#{gadmin.admin}" action="adminHome"/>
<af:commandMenuItem text="#{gadmin.epaAttr}" selected="true"/>
</af:menuPath>
</afh:rowLayout>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="20"/>
</afh:rowLayout>
<afh:rowLayout halign="center" valign="bottom">
<afh:cellFormat width="20%" height="20px" valign="bottom">
<af:menuTabs>
<af:commandMenuItem text="#{gadmin.epAttr}"
action="#{EditManualProfileAttributes.firstTab}"
binding="#{EditManualProfileAttributes.commandMenuItem2}"
id="commandMenuItem2"/>
<af:commandMenuItem text="#{gadmin.auditHistory}"
action="#{EditManualProfileAttributes.secondTab}"
binding="#{EditManualProfileAttributes.commandMenuItem1}"
id="commandMenuItem1"/>
</af:menuTabs>
</afh:cellFormat>
<afh:cellFormat styleClass="bottomLine" width="80%"
height="20px" valign="bottom">
<af:objectSpacer height="1" width="1"/>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="100%" height="10"/>
</afh:rowLayout>
<af:panelForm id="panelForm1" width="100%"
binding="#{EditManualProfileAttributes.panelForm1}">
<afh:rowLayout width="100%">
<afh:cellFormat width="15%">
<af:outputText value="#{gadmin.mpAttr}"
inlineStyle="font-family:Arial; font-size:9.0pt; font-weight:bold;"/>
</afh:cellFormat>
<afh:cellFormat width="85%">
<f:verbatim>
<hr align="left"
style="border-width:2.0px; color:rgb(219,238,243);"/>
</f:verbatim>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="20"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="5%"/>
<afh:cellFormat width="15%">
<af:outputText value="#{gadmin.refName}"
styleClass="outputText"/>
<af:outputText value=" * "
inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
</afh:cellFormat>
<afh:cellFormat width="80%">
<af:selectOneChoice id="navList1" autoSubmit="true" partialTriggers="commandButton2"
valuePassThru="true" unselectedLabel="Select"
binding="#{EditManualProfileAttributes.navList1}"
valueChangeListener="#{EditManualProfileAttributes.getDetails}">
<af:forEach var="li"
items="#{bindings.GetRefNamesVO1.rangeSet}">
<af:selectItem label="#{li.ReferenceName}"
value="#{li.Id}"/>
</af:forEach>
</af:selectOneChoice>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="10"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="5%"/>
<afh:cellFormat width="15%">
<af:outputText value="#{gadmin.refId}"
styleClass="outputText"/>
<af:outputText value=" * "
inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
</afh:cellFormat>
<afh:cellFormat width="15%">
<af:selectOneChoice id="navList2" autoSubmit="true"
partialTriggers="navList1 commandButton2"
binding="#{EditManualProfileAttributes.navList2}"
valueChangeListener="#{EditManualProfileAttributes.getColumns}">
<af:forEach var="li"
items="#{bindings.LookupRefTableVO1.rangeSet}">
<af:selectItem label="#{li.LookupDesc}"
value="#{li.LookupId}"/>
</af:forEach>
</af:selectOneChoice>
</afh:cellFormat>
<afh:cellFormat width="15%">
<af:selectOneChoice id="navList3"
binding="#{EditManualProfileAttributes.navList3}"
partialTriggers="navList1 navList2 commandButton2">
<af:forEach var="li"
items="#{bindings.EditRefColumnVO1.rangeSet}">
<af:selectItem label="#{li.DetailDesc}"
value="#{li.DetailsId}"/>
</af:forEach>
</af:selectOneChoice>
</afh:cellFormat>
<afh:cellFormat width="50%"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="10"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="5%"/>
<afh:cellFormat width="6%">
<af:outputText value="#{gadmin.stDt}"
styleClass="outputText" id="outputText1"
binding="#{EditManualProfileAttributes.outputText1}"/>
</afh:cellFormat>
<afh:cellFormat halign="left">
<af:outputText value=" * " id="outputText2"
binding="#{EditManualProfileAttributes.outputText2}"
inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
</afh:cellFormat>
<afh:cellFormat width="4%"/>
<afh:cellFormat width="80%">
<af:selectInputDate id="startDate"
binding="#{EditManualProfileAttributes.startDate}"
partialTriggers="navList1 commandButton1 commandButton2">
<af:convertDateTime pattern="dd/MMM/yy"/>
</af:selectInputDate>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="10"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="5%"/>
<afh:cellFormat width="15%">
<af:outputText value="#{gadmin.edDt}"
styleClass="outputText" id="outputText3"
binding="#{EditManualProfileAttributes.outputText3}"/>
</afh:cellFormat>
<afh:cellFormat width="80%">
<af:selectInputDate id="endDate"
binding="#{EditManualProfileAttributes.endDate}"
partialTriggers="navList1 commandButton1 commandButton2">
<af:convertDateTime pattern="dd/MMM/yy"/>
</af:selectInputDate>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="10"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="20%"/>
<afh:cellFormat width="7%">
<af:commandButton text="#{gadmin.save}"
action="#{EditManualProfileAttributes.save}"
id="commandButton1"
binding="#{EditManualProfileAttributes.commandButton1}"/>
</afh:cellFormat>
<afh:cellFormat width="7%">
<af:commandButton text="#{gadmin.reset}"
action="#{EditManualProfileAttributes.reset}"
id="commandButton2"
binding="#{EditManualProfileAttributes.commandButton2}"/>
</afh:cellFormat>
<afh:cellFormat width="7%">
<af:commandButton text="#{gadmin.cancel}"
id="commandButton3"
binding="#{EditManualProfileAttributes.commandButton3}"
action="adminHome"
onclick="return cancel()"/>
</afh:cellFormat>
<afh:cellFormat width="59%"/>
</afh:rowLayout>
</af:panelForm>
<af:panelForm id="panelForm2" rendered="false" width="100%"
binding="#{EditManualProfileAttributes.panelForm2}">
<afh:rowLayout width="100%">
<afh:cellFormat width="15%">
<af:outputLabel value="#{holdc.mpaAttr}" id="abc"
inlineStyle="font-family:Arial; font-size:9.0pt; font-weight:bold;"/>
</afh:cellFormat>
<afh:cellFormat width="85%">
<f:verbatim>
<hr align="left"
style="border-width:2.0px; color:rgb(219,238,243);"/>
</f:verbatim>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="20"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="15%">
<af:outputLabel value="#{holdc.refeName}"
styleClass="outputText"/>
<af:outputLabel value=" * "
inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
</afh:cellFormat>
<afh:cellFormat width="85%">
<af:selectOneChoice id="navList4" autoSubmit="true"
unselectedLabel="Select"
valuePassThru="true"
binding="#{EditManualProfileAttributes.navList4}"
valueChangeListener="#{EditManualProfileAttributes.getVersions}">
<af:forEach var="li"
items="#{bindings.AuditRefNamesVO1.rangeSet}">
<af:selectItem label="#{li.ReferenceName}"
value="#{li.Id}"/>
</af:forEach>
</af:selectOneChoice>
</afh:cellFormat>
</afh:rowLayout>
</af:panelForm>
</afh:tableLayout>
</h:form>
</afh:body>
</afh:html>
</f:view>
</jsp:root>

Hi Puthanampatti,
Thanks a lot for your reply, but i am using JDev 10.1.3.3. There is no panelFormLayout component and i am not using that component.
Even i am strange this duplicating of components and values in selectoneChoice occuring from past 2 days in the old file. I am wondering whether my file got corrupted by any sort.
Regards,
R N V Prasad

(No notification) word appears twice on the notification center of my iPhone 6 plus

(No notification) word appears twice on the notification center of my iPhone 6 plus

Try a reset.
Hold the on/off and home buttons together for about 10 seconds until the Apple logo appears.

Why my money were taken twice for the same program why my money were taken twice for the same program

why my money were taken twice for the same program?

contact expresslane via email or chat, they will refund you as long as this is the first time

Pacifictime format PST required in the output of report

I want to display the pacific time format i.e. PST in the output of Report.
Can you please let me know.....if any function module or else....
I am using the followin lines of code but it was not showing correct time...please correct me if I am wrong.
REPORT ZTIMEZONE.
DATA: time_stamp type timestamp,
      dat TYPE d,
      tim TYPE t,
      tz TYPE ttzz-tzone.
Data : text(4) type c,
       text1(4) type c,
       text2(4) type c,
       text3(20) type c.
data : temp(15) type c.
*tz = 'BRAZIL'.
tz = 'PST'.
dat = sy-datum.
tim = sy-UZEIT.
CONVERT DATE dat TIME tim
        INTO TIME STAMP time_stamp TIME ZONE tz.
WRITE: / time_stamp.
temp = time_stamp.
concatenate temp8(2) ':' temp10(2) ':' temp+12(2) into text3.
write : / text3.

It considers your time as the GST and than calculates the time for you as per the PST's rule.
Try like this:
DATA: time_stamp type timestamp,
dat TYPE d,
tim TYPE t,
tz TYPE ttzz-tzone.
tz = 'PST'.
* Get the time in the time stamp
get time stamp field time_Stamp.
CONVERT TIME STAMP time_stamp TIME ZONE tz
        INTO DATE dat TIME tim.
WRITE: /(10) dat, (8) tim.
Regards,
Naimesh Patel

How to make the field in the output ALV report editable ?

Hi,
I have a requirement to make fields like MATNR,WERKS in the output ALV report editable . Could any of you help me with this ?.
Thank you.
Moderator Message: Search.
Edited by: kishan P on Sep 6, 2010 6:35 PM

Hi
Please for available information on SCN. There are a lot of information on SCN about ALV wit hEDIT functionality.
Regards
Abhii

One of my email accounts appears twice in the Folders pane. No idea why.

I have several accounts in Thunderbird. One of them appears twice - I know it's an exact copy becasue if I rename one folder, both accounts have the new name. The other accounts show only once. Mystified.

@christ1 Yes, using the same logic windows limit is something like 16 extbytes. Reality is 4Gb pulls it up.
There has been recent work on the messageid that will be in the next release, might even have made it into a recent security and stability release. But until that happens Thunderbird has 4Gb limited messageid numbers. I am still not convinced a non IMAP folder can be successful in the 4Gb plus range. Only time will convince me all the ugly realities have been fixed.

Why do exported JPGs appear darker than the processed RAW in the LR3 Development module?

I have scoured the forums with this question, and I have seen plenty of suggestions about color space and monitor calibration. However, I never seem to find that the issue gets resolved in the forums.
I am using Lightroom 3, and I am exporting to JPG using sRGB. I have noticed that the JPGs appear darker and the prints are also darker. I am using the same monitor to process in LR and to view the exported JPG. Why don't the images look the same, or at least similar? The difference is pretty huge.

rasu wrote:
… What do you mean by export in an mp4 wrapper? Do you mean export it as an mp4 format instead of H264?? …
no, exactly I did NOT meant that.
that's why I phrased 'wrapper':
a bit confusing, but there's mpeg4, the codec, and there's mp4 the wrapper or media-container:
• use your .mov you have already exported, which has the right colors.
• download/install the free tool Mpeg Streamclip
• open your mov, go straight to 'save as' and choose from drop down mp4
• save and upload that mp4 for comparison to Vimeo
• (tell us, wether you notice any difference, as said, just an assumption)
What will that do?
your h264 encoded material is actually in a .mov-wrapper
Streamclip unwraps that, and puts it into a .mp4-wrapper
this does NOT encode/transcode/affect your h264 material!
it just changes the box, not the chocolate!
What's NOT working is changing the suffix in a Finder operation - that does NOT affect the 'atoms' of the wrapper = a re-named mp4 will be 'noticed' by many programs/players as a mov anyhow! You HAVE to go the 'long' way with Streamclip - due to the simple re-packing operation, that process needs only seconds
I'm using this process to 'convert' my FCPX/iMovie .mov-exports to a readable format for my son's Playstation3 ... mov is a nogo, re-named suffix is a nogo. only re-wrapping to .mp4 works. excellent.
... but, as mentioned, I do care very little about gamma and luma as an hobbyist, my 'products' are under-exposured and veeery colorful anyhow

Favorite themes appear twice in the Themes window

Whenever I save a theme as a favorite, it appears twice in my Themes window. When I click on each duplicate instance of any given theme in the Themes window, it seems to produce the same result, so operationally it's not a problem. Still, it's a nuisance to have to scroll through twice as much stuff to find what I want, and it doesn't seem right that each favorite should appear twice.
I've searched my drive for two instances of each .favorite file, but I can only find one instance, located in *~/Library/Application Support/iDVD/Favorites*.
I tried trashing the preferences file, but when I re-opened iDVD, I got the following prompt:
+*Project Duration*+
+Your project exceeds the maximum content duration. To burn this project, remove some content.+
That's nonsense. I had already "burned" (saved) the project to a disk image, and it burned just fine. Besides, the project is shorter than other projects I've burned with no problem. The upside of having replaced the preferences file is that the double instances of my favorite themes were gone.
I had saved the old preferences file, so I restored that and trashed the new one. That got rid of the bogus Project Duration message, but now I'm back to double instances of my favorite themes again. There is definitely something screwy going on with iDVD.
Can anyone help?
Thanks!

Never mind...I solved it. When you trash the preferences file and iDVD creates a new one, it automatically selects "Best Performance", which naturally increases the filesize of the disk image file. It's sufficient to just acknowledge the Project Duration message and then go into Preferences:Projects and change the Encoding to "Best Quality". That fixes project duration problem.
Actually, there's a far more serious problem with "missing themes", but that will be the subject of another thread if the complete reinstall of iDVD I'm doing now doesn't solve it. Grrrrr......

Why does same artist appears twice on iPod Mini?

Even though I change the "get info" to show just the artist's name and not the "...feat ___" the songs continue to show up separately in my iPod. How can I get all the songs to appear under the artist name?

what do you mean by in a row? I have the same exact problem, but there different albums that's why there doubles, triples, and quadruples of the same artists, but how do you fix it so that the album is only under one artist?
PLEASE HELP ME!
Dell Precision 420 Windows XP

Why report section is appearing twice in the output of report designer

Similar Messages

Maybe you are looking for