Why responsibility is not show for my user?

Hi experts,
Recently i need to enable one responsibility(named as R below) for my user. As i examined, R is already assigned to the user but
it's expired, so i set the end date as null. Further more, i found that R itself has an expiration date and it has arrived, so i set it as null too.
Till now, i re-login my user and expect R shown on the left tree of home page. But it doesn't exist, really.
I guess there should be a concurrent request need be run but i can't figure this out. Appreciate your help.
Thanks,
ted

If you are on R12, please see (Concurrent Processing - Concurrent Program "Sync Responsibility Role Data Into The WF Table" errors: Cannot Find File affurg02.sql [ID 727534.1]).
R12 is the EBS version i am using. From the note 727534.1, this concurrent program is obsolete and replaced by "Workflow Directory Services User/Role Validation".
Please post the contents of the concurrent request log file here.Log for "Synchronize WF LOCAL tables"
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFLSC module: Synchronize WF LOCAL tables
Current system time is 09-SEP-2012 03:35:33
**Starts**09-SEP-2012 03:35:33
**Ends**09-SEP-2012 03:37:49
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PRINT -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 09-SEP-2012 03:37:51
Log for "Workflow Directory Services User/Role Validation"
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFDSURV module: Workflow Directory Services User/Role Validation
Current system time is 09-SEP-2012 03:36:03
**Starts**09-SEP-2012 03:36:04
**Ends**09-SEP-2012 03:36:31
ORA-08103: object no longer exists
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 09-SEP-2012 03:36:31
Thanks,
Ted

Similar Messages

UWL Subview does not show for one user

Hi All - We have a UWL Subview. It is working fine except for one user. He cannot see the entire Subview drop down box at all. It is as if it does not exist. I've verified he has the tasks for the Subview to appear. Can anyone give some ideas as to what other possibilities this can happen? I've tried several things. Verified with security no roles exist for functionality within the UWL. The user have tried going to our QA system and logged in as a test user id - Subview visible. His ID is valid and active in ECC. If you don't have a direct answer, maybe you know of tools on how to debug or trace the UWL. I've seen two threads exactly like my situation and they receive no responses. Hopefully, there is something new to my request.
Thanks in advance.

The issue is resolved. In the Portal UWL Admin screen, the user showed personalization settings for the Subview. We decided to delete all entries. He can now see the Subview drop down. It is weird because on his own his access to his own personalization settings is empty.

Special characters in SBWP dynamic columns are not showing for some users

Hi experts,
We have set up a dynamic columns for business workplace. One of the field displays the comments entered by the user. Some users are able to see the values entered perfectly. But for some users, if we enter special characters like @gopal, it is not displaying the value in dynamic column.
Are there any workflow/user settings need to be changed.
Thanks
Gopal

I had the same issue, you should check the link between AD and CRM, so you could make a new user in AD and connect your CRM account with it, then you should return the old AD account back. It worked for me, try it :)

SCSM - Service Request Area list - modifications not showing for all users

Hi All
As you cant edit the Service Request Area list, i've settled on changing the default display names to better reflect the categories we want for our SR's. The changes i've made are visible in SCSM on my computer (where i made the changes from), however if
i fire up another instance on a different computer - i can only see the defaults. Anyone seen that before? Typically when i make any sort of change to a list item it is visible for all users.
I'm aware that there is a custom MP out there to allow you to have your own SR Area List, however i was not able to get it to work in our environment (link: http://gallery.technet.microsoft.com/Custom-Service-Request-e4d40738/view/Discussions#content)
Any help would be appreciated.
Thanks

Have you made sure that the selected language in both consoles (the one you are editing from and the one you are testing in) are the same?
When editing lists you will only be asked to save changes (be that changing existing values or adding new ones) if they are stored in a sealed MP - which they should be according to best practice.
If you are not asked which MP to save to then you have already "commited yourself" to a specific MP. You could delete this MP (if there is nothing but the list values in it) or delete them one by one using the console. Then when back to square one the console
will once more ask you which MP to save changes to.
http://codebeaver.blogspot.dk/

Tables, views, packages, etc. not showing for most users

11.1.0.7
trying sqldeveloper 2.1.1 & 3.0.02 (64 bit)
jre 1.6
Started getting blanks this morning when expanding the nodes of most of my local users (cleared filters). Seeing no tables, views, packages. However, if I login sqlplus as that user and select * from tabs, I CAN see all tables are there.
I can use sqldeveloper to view all the SYSTEM user objects and one recent user that I imported (impdp) from a 10g database. However, every other user appears empty in sqldeveloper.
I grant connect, resource to all users since this is just a development database. Also tried granting CREATE SESSION and even ALL PRIVILEGES, no luck. All tried restarting.

self is also facing the same issue. workstation is install WINDOWS 7 Pro and 10g client is not available as of now for Windows 7 Pro so oracle client 11.2.0.1.0 installed. Database pertains to one datacenter is serving as desired but databases lying with remote data center, none of objects are shown even not as SYS also where as sqlplus is showing all objects. tried with TNS option and without TNS as well but objects not listed. don't understand the behavior of SQLDeveloper 2.1.1.64 Build-Main 64.45. for information all DBs are of 10.2.0.4 with mix flavour of non windows o/s.
Edited by: 824691 on Dec 30, 2010 10:33 PM

Thunderbird Mission Control Desktop/AutoConfig not working for some users

I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

2013 Custom Web Parts in Page Layouts not showing for users

Custom Web Parts in Page Layouts not showing for users
I have created a master page in the root site collection for a subsite I am developing. I created content types and custom page layouts for the pages within the subsite.
I used the snippet tool in the design manager to create web parts and page field markup which I copied into the custom layout HTML pages in the root site collection. For instance I have an image viewer web part that I place there to serve as a section title.
The problem is that I can see all these customer layout page parts no problem but my users cannot. This leads me to believe its permissions, I am site owner of both the subsite and root site collection.
The users that cannot see the web parts are site members of the site and restricted read users on the root site collection (where the layouts are stored).
What gives I'm finding it hard to understand why a snipet generated web part wouldn't show in all pages created from that layout page.
Any help would be appreciated, Havent found anything on this issue online. weird.

It is a permission issue indeed. Fix is simple, make sure you check out the page layout page, then check it back in as published version.
John Architect

Account Number In Bank Account Transfer CM It Show For My User Only and Not

Hi,
Cash Management / Bank Account Transfers
when make transfer From Bank Account Transfer and Enter Of All The Required Data
And Search Bank Account Number It Show For My User Only And Not Show For Some Other Users
With The Knowledge That The same responsibility For My User and All Users In Cash Resp.
How to solve this problem ??
Thanks,
Mohamed Gamal
Edited by: Mohamed Gamal on May 12, 2011 11:12 AM

I bought MLB.tv premium through Apple TV however I was not provided with a user ID and password to be able to log in on to the computer to watch as I would if I bought directly from MLB.tv. Is this a scam? Anyone else have this issue.

SharePoint 2010 List View Web Part not showing for read-only users?

Hello all,
I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
Is this intended by Microsoft or is it a bug?
Thank you!

Hi,
According to your post, my understanding is that the read only user could not see the list view web part.
Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
1. Check whether the user can access the list.
2. Check whether the user can view all the items instead of partial items in the list.
3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
If that is the case, make sure the user can access the lookup list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning.

There are a few tv shows that played this week that are not available on itunes from tnt. Why are they not available for download.

There are a few tv shows that played this week that are not available on itunes from tnt. Why are they not available for download. We watch these each week, and I have checked to be sure that there was actually an episode this week, and there was.

Under other "sync-able" players, there's usually the "Sync only checked items" radio button. Not for the 2.0 Apple TV. There's no option, but acts as though that option ("sync only, etc...") has been selected. Figured it out after an hour of walking back and forth from my Mac to the TV. Argh.
Try it. De-select the shows, sync the AppleTV and look under the "TV Shows" and the one's you've unchecked will not be there.
R,
the wedge

My iphone problem is network bar not show for searching why how can resolved my iphone

my iphone problem is network bar not show for searching why how can resolved my iphone
my iphone model is MD239B/A
my iphone serial no: DQ******TD2
<Edited by Host>

Hi mirza_ali,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
iOS: Understanding cellular data networks
iPhone: Wireless carrier support and features
I hope this information helps ....
Have a great day!
- Judy

Linked Recon event does not show up in user's provisioned resources

I am totally new at this Orcale OIM stuff and I have looked through this forum and have not found an answer. I have configured the connector and and (I think) successfully ran the EBS_TR_User task limiting it to one specific user. It runs and I do not see any errors. It did create an entry in the Recon Event Manager in the design console and the event indicates that the EBS user is "linked" to the expected OIM user. The recon event also shows the responsibility that is in EBS for the user. However, what I do not understand is that when I look at the user in OIM and select to display the resource profile for the user, the responsibility does not show in OIM.
Why does it not show in OIM? Is there something I am missing to cause it not to appear? Or is there another step I need to complete to make it appear? Or does it just not ever appear? Does anyone know what to do after the EBS_TR_User scheduled task runs or where I can find information on this? Any insight or direction is greatly appreciated !!

Well take care of Martin's Suggestion to first of all identify that its Trusted Source or Target Resource model of reconciliation you are running. This is how you can identify that:
- Check it against the Connector Documentation Or
- Go to the Resource Object against which you are running this reconciliation. Check the Trusted check box. If this is checked then you are running Trusted Mode and in this case you won't be able to see those Responsibilities in the Resource Profile of Users.
Now if the above condition is not true and the mode is not Trusted then make sure you have the following rule condition defined.
One Entity Match Found -> Establish Link
One Process Match Found -> Establish Link *(For Later on identification of same Account)*
Thanks
Sunny

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

Street and house number not showing for few customers in search xd03

Hi All,
While trying to search for a customer number in XD03 using "Address Attributes", i get the list of customers which is fine. However for few of those customers, system does not show the street name or the house number in the initial search result screen. When i go to check those customers, i see that those are maintained.
Can you tell me why is it not showing in search screen although they are maintained properly.
Regards,
Indraveer

You may need to check how those customer masters are created.
Also check whether those master records are set with deletion indicator or blocked.
Before posting my first response, I too searched OSS notes, but in vain.
The below OSS notes is not exactly providing solution for your issue, but you can have a look at those.
Note 1040733 - Search Help DEBIX: no result found as it should be
Note 408456 - F4 help selections not transferred for customer/vendor
Note 713677 - CUSTOMER_SEARCH/VENDOR_SEARCH fails if the address is shared
Regards

Why responsibility is not show for my user?

Similar Messages

Maybe you are looking for