Why RW2 & DNG versions of the same RAW picture look much different?

Dears!
RAW format for my camera is RW2. I used conversion of RW2 files into DNG to process it in Ps.
When previewing pictures in IRFAN VIEW I noticed that RW2 and DNG versions of the same picture (before any processing) are quite different. RW2 one is much sharper and with better collors than DNG.
Does anybody know why it is like that and if its better to use an external soft to work on RW2 files directly instead of converting them into DNG to process in Ps Camera Raw? Thanks for help!
Marek

IrfanView is showing you camera-processed image (embedded in the raw file by the camera), whereas ACR is showing you, well, ACR-processed image. You need to learn how to set up defaults and edit to please...
Edit: IrfanView is also showing you an embedded preview of the DNG, but it's the default rendering of ACR instead of camera.
All experienced ACR users can accomplish superior results than camera-jpeg. However, initial rendering needs some help, and also there is a psychological factor: you're used to the way the camera renders things, and so it seems more right...

Similar Messages

Why RW2 & DNG versions of the same picture look much different?

Dears!
RAW format for my camera is RW2. I used conversion of RW2 files into DNG to process it in Ps.
When previewing pictures in IRFAN VIEW I noticed that RW2 and DNG versions of the same picture (before any processing) are quite different. RW2 one is much sharper and with better collors than DNG.
Does anybody know why it is like that and if its better to use an external soft to work on RW2 files directly instead of converting them into DNG to process in Ps Camera Raw? Thanks for help!
Marek

MarkJan77 wrote:
The forum is about DNG files so I belive my topic fits in the acceptable range of subjects. If not it would probably be removed…
Hehehe… You have an amusing misconception regarding the monitoring and/or moderation of these user to user forums, especially the DNG forum with its minimal traffic.
Posts can go unanswered here for months or forever. Adobe does not monitor the forums.
You had not mentioned you saw the issue in Ps as well, you only referenced IrfanView, and that was what I addressed.

Multiple versions of the same RAW image

Hi All,
It's posible to have multiple versions of the same RAW file. Let's say I work my RAW file and make some changes, can those changes become an independent file? I want to be able to go back to the original RAW file without loosing any other version already created.
Best regards,
Jose

Hi Kim,
May be you can try this and see if this works for you. I am not 100% sure if it will work for you, but worth a try I guess. Create a Test WebDynpro project and try the following steps on this project. If they work out correctly and serve the purpose for you only then try them on your actual Web Dynpro project.
1. Create a test Web Dynpro project say "TestWDProject" with Component say "Comp1" and the default views and windows etc.
Also create some working application our of this component and Windows using the Context.
2. Right click the "Comp1" and select Copy.
3. Right click 'Components" node in the project structure and select "Paste"
4.This step will try to paste the copy of Comp1 as a new Component.
5. You can change the Name and Package of the Component.
6.Similarly you'll get the prompts for views,windows etc.
7.Once you have copied everything, Just check if everything looks good.
8.Now you can create a new Application using this new component and the Component Interface View and Deploy it.
9.Test whether the Application created out of this copy works same as the original component.
You can also try to create another Web Dynpro project and paste the Comp1 in the Components node of that new project and perform the same steps.
Again, try with these Test Projects and see if this serves your purpose before applying the steps on actual projects.
Regards,
Ajay

Why would two copies of Lightroom 5 create DNG files with different sizes from the same RAW file? (size is dramatically different, on the order of doubled in size.)

I have a copy of LIghtroom 5 on my office computer and a personal copy on my home computer. I convert my RAW files to DNG with Lightroom when I import them. Files I shoot for work also get imported on my home workstation. I noticed today that the resulting DNG files for the same RAW image are widely different in size. The ones at home are roughly twice as big as the ones from the office.
To the best of my knowledge, things are set up the same on both workstations. Any idea what setting might be causing this variation?

I don't think it's possible to apply lossy compression when importing directly into Lightroom. I know you can do it with the DNG converter and on export but I don't think this is the case here.
In which case we need to determine which set-up producing is the "correctly" sized files. What's the camera and what are the respective file sizes from work and home?

I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, when I want to know how much memory can not store in the same way in either computer.

I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, the way to see how much memory I have in my iMac is diferent than MacBookPro. And where I can see the memory of the disc I've got in my iMac? Than you very much.

If you want everything the same on both computers you need to be running the same OS X version. You can't because your iMac is a PPC machine, not Intel.
But to see information about your hard drive is the same for both. Simply select the drive icon on the Desktop. Press COMMAND-I to open the Get Info window. Disk information is in the upper panel.

Why is my mac syncing multiple version of the same song?

I wonder if anyone could help with this:
My sync takes so long sometimes and it often syncs 2 or 3 versions of the same song on loads of albums.
I have to go through manually one by one and delete them off my phone, and sometimes i only stumble across duplicates by accident.
Its very frustrating.
Im on OSX 10.9.2 with an iPhone 5s running the latest version of iOS.
Thanks.

eek that sounds unpleasant. Are the songs different in any way?
Are these albums using playlists to sync?
If so…check that the the playlists on the Mac don't have the duplicate copies - in this case the same file will be reused (not using extra space on the device).
Do they show as multiple files in iOS's Albums view? You may need to tap 'More…' and then 'Edit' to add the 'albums tab' to the bottom menu. Save and check for duplicates.
I'd reboot everything, backup the device to iTunes, disable music syncing to empty the device and resync to see if that helps, if it fails consider resetting the iPhone. http://support.apple.com/kb/HT1414
Try another sync. If that is OK restore the backup & see if it comes back.

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

Can I run Release Candidate (19.02), Beta, Nightly, Aurora and ESR versions on the same computer?

I know I can run the Beta and Nightly together on the same computer because they are installed in different directories. What I do then is that I have a Profile for each version. What I do is I run FireFox.exe -ProfileManager when I start either the Beta and Nightly builds.
My Question is can I also install the Aurora, Release Candidate and ESR versions on the same computer like I do with the Beta and Nightly? If so, how do I go about installing them in different directories? I will create new profiles for each version. What I then do is, copy everything in my original Profile to the newly create profiles so I can keep all my plugin/addons, themes, bookmarks, etc. the same.
Next question, (I think I know the answer but I just want to make sure) now can I sync my bookmarks from each of the different profiles that I created?
Secondly, I now I can do the ABOUT:CONFIG in the address bar of Firefox, does anyone have any idea where I can read up on what each entry means? Also, are there any other secrets in Firefox, similar to the ABOUT:CONFIG trick? I know of one app where you can do ABOUT:ME, but that's all I know.
I know this has been asked billions of times, but I also have to ask. Is there any chance at all that Firefox, Thunderbird, and/or Seamonkey will be ever release for the iOS from Apple? I know that it's impossible, but maybe someone MIGHT have some positive thoughts on this?
Lastly, I know this is off topic, but I'll give it a shot. I'm using Outlook 2013, does anyone know if Outlook can handle Newsgroups? The reason why I ask is because I've just learned that there are a ton of newsgroups for Firefox, ThunderBird, and SeaMonkey. I would like to, somehow, get those Newsgroups in Outlook 2013. I already get allot of the feeds for other things, so that's not a problem.
I would appreciate it very much if anyone could help me with these issues.
Thank You.

You can consider to use Firefox Sync to sync all the profiles.
You can do a custom install of each version and install each version in its own program folder.<br />
Safest is to modify the desktop shortcut and add -P "profile name" to the command line to start each version with its own profile.<br />
Be careful with clicking a file in Windows Explorer to open the default browser, so make sure to select the correct profile in the profile manager and check the don't ask setting.
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

Can iTunes handle multiple versions of the same app?

Now that iTunes, iOS, and iDevices have been around long enough for users to have multiple devices on multiple iOS versions, is Apple doing anything to allow users to run multiple versions of the same app through iTunes?
Case in point I have an older iPhone running iOS-5 with a few apps that are now running exclusively on iOS-7, my new iPhone is on iOS-7. Once I sync my new phone with the updated versions of the app, iTunes usually dumps the old version into the trash bin. But what if I need that older version to continue running it on my iOS-5 iPhone?
Is there a workaround for this? I've considered using an old PC as my base computer for sycning the new iPhone, but I still fear that the new app updates will go to all devices running on my iTunes account through iCloud.
If Apple doesn't address this problem at some point then as the years go by certain iDevices will eventually become completely useless even if they are a fully functional piece of electronics.
(spare me the "that's their plan, corporate greed" replies).
Thanks in advance!

Yes, the apps SHOULD be developed to work with the new stuff, No, not all apps keep their old versions in the App Store, BUT, finally Apple has ALLOWED developers to have multiple versions of an App in the store.
The problem isn't about retarding development, it's about Apple trying to force users to buy new things that they don't need because the old thing, though it works just fine & has the apps that you need, is unable to be used because the apps have been updated in iTunes. Why can't you allow me to keep Facebook 5.0.1 for my old iPhone 3G that is used as an iPod, Facebook 6.7.2 for my iPod Touch & Facebook 19.6.4 for my new iPhone 8? As of now I can download the old version on the old device, but when I sync it it always tries to 'Update' it & then says 'Can't be updated because this version is incompatible with this device' making the sync take 3x as long & meaning that if my device crashes for some reason or I choose to restore it becasue of problems I have to go find the old version, hoping that I saved it, delete the new version, drag in the old version, THEN sync & then move the old version back before updating from my other device (Having done this with the 3G & iTouch 4 for years I learned that when the sync transfers purchases from the phone it 'replaces' the file instead of moving the old 1 to the trash).
Some of these apps I have purchased, & by forcing the update to remove the old version Apple is essentially taking something I have purchased & saying I am no longer allowed to use it.
Just in the what 3 months since the new iOS came out I have noticed that now over half of the apps can't be run on my iPod Touch 4G.
It's simple, iTunes should either:
Keep a record of the devices that have synced (I know, it already does) & keep the newest version for the lated iOS in iTunes
Let users have multiple versions of the same app in iTunes & allow us to disable update checks for certain apps
Allow users to choose to download from iTunes the different versions of the apps available from the developer
OR
Allow users to edit the info on Apps, unlinking them from their original & updates & allowing users to keep an old version & still download a new 1

When attempting to set up Mac OS to open a specific app (version), and selecting 'Change All' on Get Info, it reverts to most latest app version of the same. Any clues?

When attempting to set up Mac OS to open files with a specific app (version), through 'Change All' on Get Info, it reverts to most latest version of the same app. Any reason why it does not allow my other version of same app to be the default one?

I have Acrobat Pro 10.1.13 and Adobe Reader 10.1.13.
If I use the Finder to get all PDFS to open with Reader instead of Pro, they do. And vice versa, using the Change All.

How does one remove duplicate versions of the same songs on an iPhone5?

How does one remove duplicate versions of the same songs on an iPhone5?

Yes, I use Live Bookmarks.
This is the RSS http://www.ctech.com/forum/rss.php
Each of those entries at the RSS site show up in my Firefox RSS folder twice. The content of each entry when I go to it is exactly the same. It's not that one is the reply to the original post or anything like that. For instance, see the attached image of the list of items that show up. The highlighted yellow on top is an example. Both of those links display exactly the same original post and replies. Why is that? Is is possible that somehow I'm subscribed twice? Does that make sense? How can I delete the duplicates, or for that matter, clear all those items that show on the list? I just want to see the new ones. Thanks.

How to import nef and psd versions of the same file ?

Hi, I am new to this so please forgive any daftness. I am trying to import from a folder with nef and psd versions of the same file. Lightroom does not seem to recognise the nef if a psd exists. In fact if I specifically try to import the nef later, I get the message that says lightroom will not import the file because it already exists. The import is set to keep the originals in the existing location and the database is new. This is the first import I have done and noticed that the file count did not match.
I need to do this because I need to create alternative psd files from the same raw file but I do not see how.
The psd were created via the bridge to photoshop route.
Please what am I doing wrong ?
Many thanks

Hi thanks for the quick reply. For a "database" application that seems a bit scary. Also I have found that it will import psd and tif and jpg versions of the same file which makes it even odder.
Do you know if there is a way to tell it to favour nef rather than psd ?
thanks,

Can I have two versions of the same original live in separate projects?

I am not an Aperature or photography expert.
I scanned in a ton of old family photos with multiple snaphots on a page and in a single file. Then I imported into Aperature, created new versions, one for each snapshot, then cropped each snapshot, so each snapshot is seperate in Aperature. (I could have learned Spanish with all the time that this took.)
Then, I tried to organize the ton of photos into projects and it won't let multiple versions of the same original photo be in separate projects. I found a way to change the filenames through Batch Change, but that didn't fix the problem.
I would like to organize the ton of files, but from what I can tell my only option would be to go back to the scanned files, make copies from Finder as needed, once for each snapshot, reimport into Aperature and recrop each individual snapshot.
Oh my, I have kids and a job and a husband and I like to sleep at night. Is there any easier way to organize the photos?
Thank you for your time.
Carol

Carol,
William Lloyd said it all, but perhaps Kirby Krieger's User Tip will explain a bit more the different uses of albums and projects:
The Well-Trod Path: a Beginner's Guide to how Aperture's major parts inter-relate
Then I imported into Aperature, created new versions, one for each snapshot, then cropped each snapshot, so each snapshot is seperate in Aperature.
You want to find each snapshot separately in Aperture? Perhaps you could explain more, how you want to organize your photos. William pointed out albums to group versions of an image. You could also assign keywords to mark special occasions like birthdays, weddings, etc. You could assign faces to find photos of persons by name. You can use the search field in the browser to search for photos by face, date, keyword, etc. Aperture is really great for accessing images in many different ways. There must be a way to access the images in your Aperture library just like you want to.
Then, I tried to organize the ton of photos into projects and it won't let multiple versions of the same original photo be in separate projects.
That is, how Aperture works. All versions of an image need to be in the same project, because they are sharing the same imported original image file. Aperture tries to save your disk space, by by not creating image files for the edited versions. Versions are just a set of instructions how to produce the rendered image, when you want to edit it or to export it. Unless you are working with the version, it will live in limbo and it will not exist as an image file. So all versions are kept together in the same project with the original image file that is necessary to render them as an image.
Léonie

How can I ensure newer versions of the same page are opened every time I visit

I am advised by my Uni IT screen to ensure that firefox is set to check for 'newer versions of the same page with every visit to the page'. This is to ensure proper functioning inside the University's internal tutorial program.

# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.cache.check_doc_frequency''', double-click on it and change its value to '''1'''
http://kb.mozillazine.org/Browser.cache.check_doc_frequency

Multiple versions of the same Web Dynpro application on the same SAP Portal

I have a single application (local development) and deploy directly to a SAP Portal(NW 7.0) from NWDS Version: 7.0.15
No problems there, works like a charm.
But I want to have multiple versions of the same application on one portal. Eg. ill build a version 1.0 for test and deploy this. Then continue to work on version 1.1 deploying this directly on the portal. The two versions should now co-existing under different names and/or packages.
Please help.

Hi Kim,
May be you can try this and see if this works for you. I am not 100% sure if it will work for you, but worth a try I guess. Create a Test WebDynpro project and try the following steps on this project. If they work out correctly and serve the purpose for you only then try them on your actual Web Dynpro project.
1. Create a test Web Dynpro project say "TestWDProject" with Component say "Comp1" and the default views and windows etc.
Also create some working application our of this component and Windows using the Context.
2. Right click the "Comp1" and select Copy.
3. Right click 'Components" node in the project structure and select "Paste"
4.This step will try to paste the copy of Comp1 as a new Component.
5. You can change the Name and Package of the Component.
6.Similarly you'll get the prompts for views,windows etc.
7.Once you have copied everything, Just check if everything looks good.
8.Now you can create a new Application using this new component and the Component Interface View and Deploy it.
9.Test whether the Application created out of this copy works same as the original component.
You can also try to create another Web Dynpro project and paste the Comp1 in the Components node of that new project and perform the same steps.
Again, try with these Test Projects and see if this serves your purpose before applying the steps on actual projects.
Regards,
Ajay

Why RW2 & DNG versions of the same RAW picture look much different?

Similar Messages

Maybe you are looking for