Why SAP Standard Program Can full screen in different screen resolution ,but my own program can't?

How to make my program can display full screen in the different screen resolution ? can you tell me ,
Thanks everyone! eg. T-code: SOST

It appears that the full-screen display will only work on the display that has the menu bar.
You can switch the menu bar to your external display by going to Solid Apple -> System Preferences -> Displays, then Arrangement.
Grab the menu bar and drop it on the icon representing your external display.
When you full screen an app it should then full screen on the Cinema display.
I wish it would just full screen on the display the window is on, but that is evidently not the way it was designed to work.

Similar Messages

What are the SAP standard programs?

Hi PM Guys,
I have a question that is as below:-
We have the following Master Data:
1) Functional Location
2) Equipment
3) Equipment BOM
4) Counter
5) Catalog Profiles
6) Task List
a) General Task List
b) Equipment Task List
7) Maintenance Plans
a) Time Based
b) Performance Based
Can you tell me the SAP standard programs available for the above master data which can be used for data migration of the above master data from the flat files into SAP system.
Thanks in Advance,
Vijaya Krishna

HI
you can find the standard program while executing the T code LSMW itself.
type LSMW ,specify the description in the next screen select the Standard batch or direct input under the heading you can find the in the field object use F4 to find all the standard programs in SAP
0400 Equipment
0410 Message (IH)
0420 Confirmation (IH)
0425 Measuring point
0430 Measurement Documen
0440 Functional location
0450 Object link
0460 Maintenance plan
0470 Equipment task list
0480 FnctnlLoc.TaskList
0490 Gen.task list
regards
thyagarjan

How to fnd SAP STANDARD program of Database table

Hi to all,
Please can anybody tell me , how to find out SAP standard program of database Tables S070 (Breakdown Statistics).
As this table contain two filelds Time To Repair and Time Between Repair , i want to knew how the standard program for the table have calculate them.
i shall be thankfull to you for this.
Regards
Pavneet Rana

Hi,
Program for table is generated dynamically for each user ID, when ever you change the selection screen in SE16 or when you are executing the table entries for first time. Usually it starts with /1BCDWB/DB followed by table name. In your case it would be /1BCDWB/DBS070.
Go to Se16, enter your table name and click enter. Once you are in selection screen, goto Menu=>system=>Status. Here you can see the program name.
Thanks,
Vinod.

Do we any SAP Standard program to Send IDOC of Type CODCMT01

Do we any SAP Standard program for outbound processing for IDOC Type CODCMT01
Message was edited by: Vipin Nagpal

- If it is for test purpose only, you could use transaction WE19 (Test Tool).
- As well you could write your own program and user MASTER_IDOC_DISTRIBUTE function module... but in this case you need to fill yourself the fields of the IDOC
- as well you can have a look at function group KALE...
E.g. function module K_DOCUMENT_SEND

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

Syntax error in SAP-standard program

Hi experts,
i am facing syntax error in sap standard program.how i can solve that error .
Error in include LFKPZTOP and errro is at line 70.
please help me ASAP.
Thanx & Rgds
Zeba

Hello Zeba,
go to include LFKPZTOP and check in line 70.
if you are not able to solve that.
post the same line, so that we can understand what is error.
as of my checking the error is "iban is already defined in the include structure bus0bk ,
but i think it dosn't effect your programing.
Regards!
Edited by: Prasanth M on Feb 10, 2009 5:04 PM

Addition of my code in sap standard program

hi gurus,
              can i add my code in the sap enhancement below in sap standard program
i want add the logic below.
ENHANCEMENT-POINT MATERIALFINDUNG_10 SPOTS ES_SAPFV45P.
$$-Start: MATERIALFINDUNG_10----
$$
ENHANCEMENT 153 OI0_COMMON_SAPFV45P.    "active version
IF NOT G_OIK_SUBMAT IS INITIAL.                         "SOTK000026 DN
     TVAK-KALSU = G_OIK_KALSU.                           "SOTK000026 DN
     CLEAR PRODUCT_SELECTION_REKURSIV.                   "SOTK000026 DN
ENDIF.                                                  "SOTK000026 DN
ENDENHANCEMENT.
when i click on enhance button(shift+F4) it does not give me any place to write.
but if i click on the enhancement name i am able create one implementation. is that ok.should i add my code there.

Hi Kiran,
That is not the solution I am looking at. Also the link provided within the link you provided does not work which is:
http://www.synactive.net/site/index.htm
Do let me know if you have a solution to change the standard GUI status(Not by copying nor by using the access key) either by any menu exit or something of that sort.
Regards,
Deepak.

How and where does SAP standard programs update the master tables...

Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh B

Hello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh

Modification in SAP standard programs.

Hi All
I am trying to make modification in SAP standard program by using a copy of code from the original program to my program..but facing many errors like the statement BEgin of block syntax is wrong..
i am trying to mdify the foloowing program--RFSSLD00...
Please help me and guide to make changes to this prog..
Also tell me that do we need to again create all the functiongroup and global data declarartion part.
thank u.

hi,
Please note that when you copy a standard Sap Program ,make sure all the objects are copied following your compays naming conventions.
Now RFSSLD00 can be copied without any difficuly.after that compare the new copied program with the standard program. going to version mngmt->remote comparison . doing this you can get the differences
check all the includes.. and type pool declartaion and gui status etc....by going to se80
regards,
Safel

Runtime Error In copy Of SAP Standard Program

How do people,
I have copied a SAP standard program H99CWTR0 because I need to add an extra
column output in the report. I have made a few chnages regarding the INCLUDES
When I run the program I am getting the following runtime error:
" The structure of the COMMON PART "DRIVER_DATA_EXCHANGE"
in program "%_T01050" is different from the calling program .....
My question is that it says the error in program "%_T01050" !!
But when I enter this in SE38 it says it doesn't exist !
Any ideas???
Andy

Thanks mate for replying.
I'll have a look at what you suggest
Andy

SAP standard program to delimits infotypes

Hi folks,
 Is there any SAP standard program to delimits the records in HR? I mean for PA/PD infotype. Or I need to write one? I have to delimits some of the IT`s Like 194 and 185...
I found the following program to delimit
RPU204M0 IT 204: delimit report for FA customers
RPU510J1 Utility program to delimit P0008 after pay sclae re-creation
Thanks

Hi Saquib
There is one standard report called RHGRENZ2 which will delimt PD infotypes...
The report only delimits infotypes with time constraint 2 and 3. Infotypes with time constraint 0 and 1 must be delimited using the report Delimit Objects (RHGRENZ0).
Hi I don't see any Standard SAP program to delimit the infotypes that were specified in your message. I believe you may need to write small BDC program to delimit....
Thanks
Thanks
Suresh B Mannem
Message was edited by: Suresh Babu Mannem

How to Debug SAP standard Program SAPMM07I

Hi All
Please tell how to debug an SAP Standard Program for MI07 T-code.
In this Transaction I would like to change the Unit of Measure filed to Alternate Unit.
Please, Help me out .. how to debug this program and how to change this field.
Thank you
Prasead K

Hi Myline
Thanks for your reply. My Issue is that I would like to Diplay "Difference Qty" VM07I-DIFMG and Base Unit
of Measure (ISEG-MEINS) in MI07 Tcode as Unit of Issue (MARM-AUSME) which is defined on Material Master Plant Data View.
Till Now, I did is I copied MI07 Standard Program SAPMM07I to ZSAPMM07I. And Assigned this Z program to MI07 in SE93. Now, I need to make modifcation in this Zprogram such that I display: Unit of Issue and Difference Qty fields on MI07 instead of Base unit of Measure.
Here, Base unit of measure is EA and Unit of Issue in ICS (Imperial Cases). IN MI04 we enter in ICS(unit of Issue.. which is converted to EA. and MI01 its in EA. (Base unit of Measure).
Please if this not clear.. please let me know.
Waiting for your reply.
Thanks once again.. !
Prasead K
Edited by: Prasead K on Feb 19, 2008 9:15 AM

Full screen resolution in win7

I have a brand new MacBook Pro 15", and a 4 year old 30" Cinema display.
In Mac OSX, the Cinema display shows full 2560x1600 resolution. However, when using windows 7 (64) via Bootcamp, the Cinema display only shows 1280x800 at full screen. When I set the resolution to 2560x1600, the visible screen shrinks to the middle of the Cinema screen, with a broad black border all around.
I have updated my software with the Mac updater, and have installed the drivers in Bootcamp while the Cinema display is attached to the MacBook.
How do I get the Cinema display to show full 2560x1600 on it's entire screen in Win7?
Any help would be really appreciated. Thanks.

Thanks for comments.
I tried to run some old Win95/98 games. Some of them can be set to run in Windows mode (like Sanitarium), but some can't (like Neverhood).
I'm just wondering in PC world normally we can set stretch mode in BIOS. for example:
Stretch to full screen
Stretch but keep aspect ratio
No stretch (in native resolution)
But I guess there is no such BIOS thing for iMac. I had done some search, and found some people have the same question as mine. Some said can be done by changing setting of display adapter driver (for Nvidia one). My iMac has ATI, and I had installed ATI control panel, but can't find any setting about it.

Bridge - How to view image in full screen resolution

In Bridge - How to view an image in full screen resolution and not as a Preview (Space bar), like in Lightroom (F), Photoshop or ViewNX 2 ?

The size of the Bridge Preview window will always be the absolute limit of the image display in Bridge. Maybe I am not following you. Sorry

My trackpad will swipe left between full-screen apps, but it will not swipe right

My Trackpad on my imac will swipe left between full-screen apps, but it will not swipe right. How do I fix this?
-m

Hi there!
I am searching this forum to find somebody that has noticed this weird behaviour. The closest I came so far is your post.
So let me explain a little easier... The problem I think you mean is:
When switching bewtween applications using CMD+TAB it does switch to the space an app is open BUT the app switched to is behind all the other windows on that space. Is that correct?
This problem is also bugging me alot because I am used to to switch fastly between apps and this just renders the whole process useless. The best workaround I found so far is to stop using spaces (or Mission Control) and keep all the apps in one space to prevent this from happening.
I really hope Apple aknowledges this bug very soon because this LION deal is a complete mess. Tons of bugs. No fixes.

Why SAP Standard Program Can full screen in different screen resolution ,but my own program can't?

Similar Messages

Maybe you are looking for