Why should we load header data first and then we load item level data?

Hi BW guru`s,
I have small confusion about the data loading.
Why should we load header data first and then we load item level data?
Is there any particular reason?
Scenario: 1st I have uploaded 2LIS_11_VAHDR sales document header data from R/3 to BW by using LO-Cockpit extraction. Then I loaded 2LIS_11_VAITM.This is the norma procedure which we use to follow.
I have a question. If I load 2LIS_11_VAITM data 1st from R/3 to BW and then I will load 2LIS_11_VAHDR by using LO-Cockpit extraction. what will happen?
Regards,
Venkat
Edited by: VENKAT BOORUGADDA on Aug 12, 2008 11:51 AM

There is no difference in doing it the other way.
The load sequence will come into play only during activation where if you map the same fields from the two datasources, you might want to have the previous value overwritten by data from the next datasource.
That is when you should care about loading one datasource before the other.
To your question it is not arule that header data should come first.

Similar Messages

I haven't used my laptop in two months and now when I turn it on it goes to ye white screen with the apple loads for a bit and then stops loading. All I have now is a white screen with an apple

I haven't used my eleven month old Mac book pro in two months and when I turned it back on it gets stuck at the silver wheel with the wheel of death spinning it has been like this for two hours

Could you specify the model of MacBook and the OS X it's running, please? Some of the advice or references vary along with the system, so this could be helpful to formulate a reply. I've never used a Guest User selection, but do have more than one User.
If the computer does not have an optical drive, you may be able to boot it into a recovery disk mode or something; in an attempt to see what is wrong and maybe fix it.
Good luck & happy computing!

Upload transaction data first BW report don't have master data description

Hi All Expert,
Im newbie to BW.
When i do my task, i upload the transaction data first and then upload the master data (customer, vendor) secondly.
When i viewing my BW report, it didn't show up the Name of customer and vendor.
Izzit because the order of upload transaction data and master data is wrong so i got this problem?
How can i solve this problem? (because i try to reupload the master data again, the name field still blank)
Hope someone can advice or help me.
Thank you very much.

Check in the master data infoobject whether the texts are loaded or not. If not, load the master data texts from your source system.
Just right click on the master data infoobject and click on "Active master data".
If still it doesn't activate, go to Menu --> Tools --> Attribute change run.

How to print header in first and last page only in SAPSCRIPT

Hi!
How to print header in first and last page only in SAPSCRIPT,
in between pages, I need to print all line items in MAIN window only .
Thanks in anticipation!
Aki.

Hi All,
Thanks for your early update...but my requirement here is
I have two pages (FIRST , NEXT ) First is having Header, Main and Footer
NEXT is having Main and Footer ..I am printing PO here..let us think that my PO is having 20lines items , let us assume that it takes five pages...
Now how application is printing is ..first set of data is printing in FIRST page and remainiang data distributed to 4 pages printing in NEXT page ..but what my requirement is , I need fifth page print on FIRST page, instead of NEXT page... Ultimately I need last set of data always print in FIRST ie out of 5 pages 1st print on FIRST 2nd 3rd 4th print on NEXT and 5th print again on FIRST .
hope you this will clear you.
Thanks!

I want to reload original software in IMAC G4 - i have original disks, can i install OSX first and then load "software restore 1 to 6" and not load OS9

I just purchased a used IMAC G4, cpu G4(1.1), powermac 4,2, 800MHz 15 inch FP and 55 Gig hard drive. I now have 750 k memory and it is working fine. i want to reload the original software. i have all original disks -CDs. These include OSX Install; OS9 Install; Software Restore 1 to 6 CDs; Imac applications.
Question, please, is which CD do i load first? Also i hope it is not necessary to load OS9. I would think OSX install first and then the software restore disks and then the imac applications?
Thanks.
Robert.

Boot from the disc labeled Disc One. Follow instructions and when you get to the part to select a Destination/Target drive click once on the drive then click on the Options button. Select the option for Erase and Install then click on the OK button and proceed.
You do not have to install OS 9. If you don't then you simply cannot use the OS X Classic emulator.
I believe there is a separate installer on Disc One for restoring pre-bundled software.

HT1338 I have a Mac pro i believe 2008 and my software is 10.5 i think.. should i upgarde tp 10.6 first and then to OS X Lion?

I have a Mac Pro, i believe from 2008 and my software is 10.5 i think.. should i upgarde to 10.6 first and then to OS X Lion?

You'll need to call the online Apple store, which in the US is at 800-MY-APPLE to buy OS X 10.6 Snow Leopard. Install OS X 10.6, do Software Updates and you'll be at OS X 10.6.8.
Then call the online Apple store again (or when you call them to order 10.6) and purchase a code to download OS X Lion (you can't see it in the App store anymore). In a couple of days, you'll get an email with the code that you can then use to download it from the App store. You need to be at OS X 10.6.6 or better to access the App store.
You'll need 2GB memory minimum for Lion and 4GB is recommended.

What is Header level data and item level data? Please elaborate.

What is Header level data and item level data? Please elaborate.
Details:
EKKO is Purchasing Document Header; what is purchasing Document Header? who,what and where can i look for this data.
EKPO is Purchasing Document Item; what is Purchasing document item means?
what is item level data means?
When you take the Senario of SRM and ECC; where the purchase data is maintained primarily in SRM or ECC?
Thanks in advance. I will assign the points only to the valuable information.
York.

Hi York,
You are right in stating EKKO as header and EKPO as line item data. They are maintained in ECC.
Now for the details about the data:
In SAP every transaction is referred to as a document. In this case you are talking about a purchase document. Now what does purchaing document contain? I will contain information like: Who is the vendor? When was the transaction done? what was bought? What is the quantity of each item bought?
Whatever is applicable across the document is called header data... and what is applicable for each item is called line item data. In this case
1. Header data would be the vendor, date of transaction, purchaing organization ... etc.
2. Line item data would be the item details, the quantity of the item, the unit price of each item ...etc.
Hope this helps.
Best regards,
Kazmi

IPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

iPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

Create a new account (systempreferences -> accounts or Users & Groups on 10.7) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

This is a user to user technical support forum. It is not our responsibility to convince you of anything.
Do you actually have a technical support question? If not, post your question on a blog or somewhere more appropriate.
Best,
GDG

I have been having problems downloading apps with my cellular data. I try installing apps from the app store and when it starts loading it just stays loading for a while but all of a sudden it loads all the way and then it restarts It goes back to waiting

I have been having problems downloading apps with my cellular data. I try installing apps from the app store and when it starts loading it just stays loading for a while but all of a sudden it loads all the way and then it restarts. It goes back to waiting

https://discussions.apple.com/message/19584729#19584729

ALV - Layout for header and item level data

Experts,
A program extracts complete sales order details (including item level data) in ALV format. Now, during display, if anyone changes the layout to have only header level fields, I would like the duplicate records created by item data to go away. Would you know how to accomplish this?
Any help would be rewarded with points.
UV

Hello,
You can do it instead of adding a button on the ALV, on the selection screen add a radiobutton asking what information is required.
Header Information
Detailed Information
Or something like that
Bye
Gabriel P

Why do most pages not load without stopping it and then reloading?

most pages will not load. I have to click on the "stop loading this page" button and then click on the reload this page button to get it to work. This has to be done on most pages but a few work fine like www.google.com . I have tried it in the safe mode and have the same results so it is not an add on. I am currently running 23.0.1 I have not had this problem until i updated to this new version.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

KNA1 is a header level data or item level data ?

How should we treat KNA1 ?
As a header data table or
Item Data table ?

Hi,
KNA1 is master data table stores information about customers.it will update thru XD01/XD02 tcodes or FD01/FD02..etc.
Master data will be used to create transactional data.
Once we created master data means,normally we dont change.like employees creation,vendor creation..etc
When it comes transactional data we have concept of header and item level.
suppose sales order is transactional data.conatins VBAK as header level, VBAP as item level data.
Header data contains main information to all the items like shipto party sales order creation date ,who created sales order,sales order type..etc.
Item level contains what material,order qty..etc.
we can call Transactional data as frequently changing data.Like when ever customer needs some item from company means we create sales order for that item.so we call transactional data as daily basis change data.
Please reward if useful.
Thanks
Sivaparvathi
Message was edited by:
Siva Parvathi

Could not load iCloud preference pane and could not load internet accounts preference pane

after a recent not so succesful time machine restore, and after turning internal hard drive and ssd on my macbook pro late 2008 into a fusion drive, I get these error messages in the system preference : could not load iCloud preference pane and could not load internet accounts preference pane. I noted that Mail, Calendar, notes etc all sync to my various device, but on my mac, I can't access the accounts feature. Can anyone help me resolve this issue ? I searched all over the net with no success...
cheers !

iMac (Processor 3.2GHz, 8GB 1600MHz DDR3, 3TB HD) Running Mavericks (10.9.4), I have the exact same problem. Local Apple Store unable to help. Turned to my AppleCare Program. They say their techs have never come across this issue this was what was done:
Have downloaded & new copy of OS X = same issue.
Deleted OS X Reinstalled OS X on blank drive - restored all my data from backup = now have no MS Office, no Adobe Photoshop Elements, no iWeb, no Parallels, no VMWare, no iPhoto in fact, nothing of "my" machine. (but problem is still there)
Advised to do an "Internet Restore" from good Backup (over 24 hours to complete); when complete, machine restarts = a circle with a cross diagonally through it and the spinning wheel. (It goes no further no matter how many times you reboot)
Now on my own, booted using "Command + R" to start in Recovery mode. Changed all permissions in Disk Utility. Rebooted. = my machine is back - all data intact and all programs there & working BUT problem persists.
I have now turned to Communities. Followed everything people said worked for them but in my case, after a reboot, I still cannot load iCloud OR Internet Accounts Preferences panes!!
If I add a calendar item on my iMac it will not sync with either my iPad or iPhone. If I add a calendar item on either my iPhone or my iPad that item will sync with the other device but will not sync to my iMac. The same is true for Contacts as well. Extremely annoying to have to type it in all the time. This is Apple for heavens sake and therefore it should work!!

When opening in filled PDF form, the data flashes and then blanks. Adobe Reader XI

When opening in filled PDF form, the data flashes and then blanks. Adobe Reader XI
I filled in this form with important data. And saved it. I have since opened it and printed it again. Now when I open it the fields become blank I can see them for a split second as it clears them.
I believe I have updated to Reader XI since I filled it in.

Hi Pat,
Are you using Adobe Reader XI? And not Acrobat. It does not ask me to save the form if there are unsaved changes.
I have used previous versions of reader for saving this form data and it did allow me to save it with ctrl+s. And those versions did prompt me to save the changes before closing.
I guess I should not have updated the reader.

Why should we load header data first and then we load item level data?

Similar Messages

Maybe you are looking for