Why silver light will not install under FF, ver# 8.0.1?

64bit hardware, ran before same machine, before restored to factory due to corruptions, vista 64 restored from IMAGE on factory portion on drive D. loads under INTERNET EXPLORER
I hate that program. (and it runs).
error message: your operating system does not support 64bit version of silver-light
w/o booting and starting IE. it installed and loads and runs
there fore it is NOT the OS
Why?

I selected FF 8.0.1. thinking it was 64bit Browser is it not?
been using FF w/o any trouble, and prefer 64.
I loaded it on my new q/core 64 OS went to FF site downloaded 8.0.1
and silverlight works just fine
so where is the differences?
both machines HP 64 bits.
1)HP DV5 NOT WORKING with Vista
dual core 2mhz AMD
2) HP DV9 WORKING with win7
quad core 2.5mhz. I7

Similar Messages

HT5022 Airport Utility 5.6 will not install under Mountain Lion

I have older Base Station Extreme and Airport Express models that need to be looked after; however, the fix to install Airport Utility 5.6 under Lion will not work under Mountain Lion. The installer complains that "the version of Mac OS X on this volume is not supported". So...suggestions?

That is correct. AirPort Utility 5.6 for OS X Lion will NOT install under OS X Mountain Lion. If you had it already installed, and then upgraded, it would have worked just fine.
One option, is to use Pacifist to extract the utility directly from the .dmg file.

Frame 7.2 will not install under Windows 7 Ultimate

HELP: FrameMake2 7.2 does not install under Windows 7. Almost at the end of the install it crashes with an empty dialogbox and a warning. Nothing else.
Any one seen this,
Keep smiling
Thomas

For more info on running things in compatibility mode, these links should help:
http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-o f-Windows
http://www.sevenforums.com/tutorials/316-compatibility-mode.html
There's also a free "XP" add-on that runs apps in a virtual mode with Win7. See:
http://www.microsoft.com/windows/virtual-pc/download.aspx
There's also another freebie virtual-machine that will allow you to run most older apps available at:
http://www.virtualbox.org/

YOU SHOULD BE ASHAMED OF YOURSELVES - FLASH WILL NOT INSTALL UNDER ANY CIRCUMSTANCES

Does anyone from Adobe support read this forum??? Adobe Flash will NOT install on a Mac. It hangs at either 95% or 97% depending on which download link is followed. IT WILL NOT FINISH THE INSTALL. I have uninstalled and tried SIX installs - back to back - and it stalls. IT WILL NOT COMPLETE THE INSTALL. You have been aware of this problem for months and have not fixed the installer. I BOUGHT A MAC, NOT ADOBE FLASH, but I am forced to use it. SO FIX IT!!!!!!

Does anyone from Adobe support read this forum??? Adobe Flash will NOT install on a Mac. It hangs at either 95% or 97% depending on which download link is followed. IT WILL NOT FINISH THE INSTALL. I have uninstalled and tried SIX installs - back to back - and it stalls. IT WILL NOT COMPLETE THE INSTALL. You have been aware of this problem for months and have not fixed the installer. I BOUGHT A MAC, NOT ADOBE FLASH, but I am forced to use it. SO FIX IT!!!!!!

Windows will not install under Mavericks

I am trying to install W7, again, under Mavericks and I cannot do so. Every thing seem to be installed but at start, I get a message that "BOOTMGR is missing, press ctl+alt+delete to restart", but the keyboard (wired and working) will not function so I can do nothing. I have tried more than once. I am trying to install W7 Home Premium and it is a legit disc. I installed the same disc under SN and all was fine.

Are you using Boot Camp, if so then please re-post in the Boot Camp forum. If you are using a virtualization app (Parallels, Fusion, etc) please post in that forum.
These are the best methods for installed Windows, this is a general iMac forum while there are a few people that post here that know MS Windows most are OS X oriented.
Good luck.

Software and drivers for photosmart c309g will not install under windows 7

hi
im trying to reinstall the photosmart c309g all in one printer, after i fitted a new HD im now running windows 7 32 bit, i downloaded both the basic and advanced instillation files, they both extract then disappear.
i have tried to do a level3 uninstall, but that does not seen to work properly with the printer model or os.
i have also cleaned out the system 32 /local/spool files (but it would not let me do all of them)
ive also searched this forum for solutions.......what is going on
thanks
leslie

Hi @leslie60 ,
I see that you are having issues installing the printer. After extracting the downloaded drivers, they disappear. I will certainly do my best to help you.
Something is preventing the setup program from recognizing files from this download.
I will provide you with some steps for editing the registry to resolve this issue in a Private Message.
In the forum beside your handle name just click on the envelope to view it.
Before doing any of the steps, back up the registry first. Back up the registry.
Please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Juniper networks VPN: Network Connect will not install under Snow Leopard

Created different thread based on the topics from http://discussions.apple.com/thread.jspa?threadID=2130935.
With new install of Snow Leopard i get the following when trying to log into SSL VPN "Could not launch. Please restart the web browser and try again"
can not do the workarounds from the above thread since none of the directories exist. Has anyone found a fix for this?

I ran into this too (made matters worse by cleaning out the old juniper install). What I understand clearly now, which other discussions with all the happiness from people saying they fixed it seem to miss completely: Juniper only works if you installed it prior to upgrading 10.6. If you did not, you are possibly hosed.
Now, I was hosed, but I found a workaround. Find a stand-alone installer .dmg out there. As of a couple days ago it was there. I'm sure it still is. Google it. NetworkConnect.dmg.
It is version 6.0.0. It installs correctly. My company runs 6.4.0, which means the first time you open NetworkConnect after installing it prompts you to upgrade. The upgrade worked fine, so long as I was running as root.
Which brings me to my original problem which I've not seen anyone else complain about, which has me worried: after installing, NC only actually connects and functions when I run as root. I'm not talking about su - root or using sudo, I mean having to graphically switch users and log into the computer as the root user (after enabling it...using the scenableroot I think, something like that).
Has anyone else seen this behavior? I can launch Network Connect as my real user but it immediately fails with a software error. 'ncproxyd.error: Failed to gain root privileges'. Driving me batty.

Oracle 8i Enterprise will not install under w2k sp3

Hi!
My problem is, that the setup-programm from cd does not start when opend.
My pc is an p4 m, 1gb RAM with w2k sp3.
Do you have any hints?
Regards
Heiko

No, not realy!
I have found some info about trouble with installtion on a p4-machine.
The work around is discribed as
- copy your cd to harddrive
- search vor symcjit.dll and rename it
- start installation
It worked, but there are some failures. When i tried to deinstall, i had the same problem again. But this time the workaround won't work.
Regards
Heiko

Creative Zen 8GB-Software from CD will not install under vi

DemoShield Player has stopped working is the message that I get when I try to install the spoftware that I got wioth my Creative zen 8GB. The OS is windows Vista. Any idea. Creatve Autorun utility kick off fine but the next screen I get is that it cannot install the software!

Did you try the downloadab;e version instead,
http://us.creative.com/support/downl...ype=0&x=20&y=2

HT5022 What works with Mountain Lion? AirPort Utility 5.6 will not install on Mountain Lion.

What gives? The AirPort Utility 5.6 wil not load on a computer running Mountain Lion. Attempted both on an iMac and Macbook.

That is correct, the 5.6 version of the AirPort Utility will not install under Mountain Lion ... but it will run on it once installed. One option is to use a utility, like Pacifist, to extract and "install" the utility into the Utilities folder.

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

Hi, I'm helping StringSinger2 with this problem.
The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
SO...
When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
Many Thanks!

Why do i get an unknown publisher for 10.5 download? will not install on XP

why do i get an unknown publisher for 10.5 download? will not install on XP

Hi
Are you using a wireless router to connect to the internet? if so disconnect the wireless router and connect through LAN. Ensure you disconnect all your wirless devices including a wirless dongle if you are using one. Once connected through LAN download again. This worked for me today.

Why is it that directory server and IAS will not install through a remote Terminal Services session??

Hi,
I think this can be done in Unix, using telnet, you may log into the
system and install it.
Regards
Raj
Mozkill Williams wrote:
why is it that directory server and IAS will not install through a
remote Terminal Services session??
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

CS6 Suite will not install in disk insertion, why?

CS6 Suite will not install on disk inseertion, why not?

Open the disk manually and run the setup.exe/install.app
Mylenium

Error "itunes has an invalid signature". Will not install. Why?

Every time I try to update iTunes on my desktop computer I keep getting the same error message "iTunes has an invalid signature. Will not install. Why am I getting this message? and how can I fix it.
ITunes came with the new HP I purchased in 12/2013. I have had a problem only with updates. I thought about uninstalling on my desktop but do not want to lose my songs. Was hoping to find a better solution than uninstalling and then re-installing.
Any how would be appreciated.

The error suggests some sort of corruption with the file you downloaded. Clear your browser's cache and download a fresh copy of the iTunes setup file.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
tt2

Why silver light will not install under FF, ver# 8.0.1?

Similar Messages

Maybe you are looking for