Why Solaris 10 could not remember my new configured IP?

Hello, All,
My problem/question is that:
Solaris 10 on T2000 server seems not remembering IP configuration,
I searched the past posts, there are some topics related, but after all that
suggestions/solutions I've tried, it still doesn't work.
What I wanted to do:
1. Add a logic IP address on ipge0,
e.x.
ifconfig ipge0:1 plumb 10.1.200.69 netmask 255.255.0.0 up
check with ifconfig -a
it is up running
2. Add a new NIC,
e.x.
ifconfig ipge3 plumb 192.168.1.11 netmask 255.255.255.0 up
After reboot, it is back to all the original configuration which ipge0 only has original address,
and No ipge3 configuration AT ALL!
BTW. I have configured /etc/inet/ipnodes files
/etc/inet/hosts
/etc/nsswitch.conf
/etc/netmasks
/etc/resolv.conf
Please suggest what i missed here?
Thanks
---wangk

Hi, Paul,
Thanks for the reply, yes, I did create those files, and you are right, I missed "hostname.ipge3" file
hostname.ipge0:1
hostname.ipge3
defaultrouter
Now, some how, the virtual NIC ipge0:1 always gets the wrong Netmask, and BOTH ipge0:1 and ipge3 have to be manually brought up after reboot, here is a copy/paste after system reboot, you can see a different Netmask and "No up" status, please ANY Idea?
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ipge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.1.200.68 netmask ffff0000 broadcast 10.1.255.255
ether 0:14:4f:7e:4e:d0
ipge0:1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.1.200.69 netmask ff000000 broadcast 10.255.255.255
ipge3: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 192.168.1.11 netmask ffffff00 broadcast 192.168.1.255
ether 0:14:4f:7e:4e:d3
Thanks alot
----wangk

Similar Messages

HT204686 I bought an iPhone 4 from a youngster who had put his own Apple ID on it but could not remember the password. I backed it up yesterday and restored to my new iPhone and it copied the Apple ID across too. Now I have 2 phones with it on. Anything I

I bought an iPhone 4 from a youngster who had put his own Apple ID on it but could not remember the password. I backed it up yesterday and restored to my new iPhone and it copied the Apple ID across too. Now I have 2 phones with it on. Anything I do?

that must be really annoying !!
so this is what you call
FIND MY IPHONE ACTIVATION LOCK Find My iPhone Activation Lock - Apple Support
when you start using iCloud on any iOS device and enable find my iPhone, this prevents a new user from using it, and also prevents anyone from using the phone
as it is locked to previous owners account ,this is also the case if when a phone is lost or stolen.
the only way around this is to have the previous owner reset their apple id by going to @ applied.apple.com
if they are unable to do this, then the only other way around this is to have the previous owner get a copy of their original receipt and call apple support who can then lift this lock if they get a copy of the receipt
unfortunately there is no quick fix -> the below link explains what you should do before you sell or give away an iPhone
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

I could not remember my apple ID password so I made a request for a new one. When I received the email with the link on resetting my password it was addressed to John Ohare. My name is not John Ohare. Does this mean someone is hacked my iCloud account?

I could not remember my apple ID password so I made a request for a new one. When I received the email with the link on resetting my password it was addressed to John Ohare. My name is not John Ohare. Does this mean someone has hacked my iCloud account?

Hello Corinne Craven,
Thank you for using Apple Support Communities!
You can update the name on your Apple ID here:
Appleid.apple.com
If you suspect unauthorized access to your apple ID I would normally recommend resetting your password, but you have already done this.
Here is some information about 2 step verification which is another level of security for your account.
Apple ID: Frequently asked questions about two-step verification for Apple ID
http://support.apple.com/kb/HT5570
Be sure to read all the information in the article if you choose to use two-step verification.
Take care,
Sterling

Firefox could not open 300 new tab with content loading

Dear All,
Thanks for good support in web browser world.Directly i come to the question.I have excel sheet where it has 300 hyperlinks as given below(example links 3)My Excel macro is written in such a way that this will open all the link in firefox "new tab " one by one.It was perfect and page was loading in previous versions(i could not remember the exact version but i could say an year before when i used firefox it worked well).Now i am having issues opening 300 new tabs with links.It gets started loading the page but before one page loading gets completed too many new links are opening but the page is not fully loaded at all.When i click the tab for each link and see in the browser the green clour processing round sysmbol keeps on rotating.Can you please look into this issue.
If you want i can be contacted through email or if the information is not clear i am ready to connect through web sharing or to have a call.If you want spreadsheet for testing this issue i will send it.
Link Used in Excel sheet example : 300 links in same site with differrent page:
http://chartink.com/stocks/RECLTD.html
http://chartink.com/stocks/bpcl.html
http://chartink.com/stocks/itc.html
Expecting your positive reply at the earliest.Thank you!
Regards,
Marx
<sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

Hi Marx,
With this kind of data testing it is helpful to provide context to the issue you are trying to document. This technical information is very useful to the engineers working on the performance of Firefox and I am sure this is the kind of information they would love to see.
Therefore I would like to put you in touch with this team to see what they can do with this information. Talk to the #perf channel in irc and they should be able to put you in the right direction. I am asking currently and see what I can find. Or in the meantime check out the current tab bugs in the Performance component of bugzilla provided in the search below: [https://bugzilla.mozilla.org/buglist.cgi?quicksearch=tab%20performance&list_id=9361049]

Could not complete the new 3D extrusion from selected layer command because the path is too complex.

I was trying to do a photo of mine like in this video but its not working help needed. thanks.
http://www.youtube.com/watch?v=egyLY78H7nE
When I tried the 3D I got an error message that said (could not complete the new 3D extrusion from selected layer command because the path is too complex.) what does this mean and how can i fix it?

There was a bug at one time where really simple paths (like a triangle, for example) could cause that error.
Is your path really simple (I don't plan to go watch the video)? If so, have you installed the latest update for Photoshop? That bug may have been fixed already.
If it's not that, it's possible that if your path is really complex and simply exceeding Photoshop's capability.
-Noel

Acrobat Standard (9.4.6) - Issue: "Acrobat could not create a new PDF form"

I have Adobe Acrobat Standard (version 9.4.6). I am trying to create a form but when I start the form wizard, locate the document to convert and click next, I get an error message "Acrobat could not create a new PDF form." What's wrong? (I've used this feature before in Adobe Pro so I am familiar with the process but I am using Standard now). It's not letting me upload my document (an MS Word 2003 document). Please, someone, anyone, help! I think I got a bad batch of software here. Any suggestions? If it's hopeless, who do I call for a replacement if that's the case? Is this software under warranty?

Hello Michael,
Thank you for your email. The file I am trying to convert to PDF and create a form with is a MS Office Word 2003 file. It isn't any specific file; the issue happens every time. I type my text in the Word doc and then proceed to open Adobe Acrobat Standard and use the wizard to create a form from an existing file. I tried to repairing the software but it does not help. Any other suggestions? Is this version of software defective? I really need this feature. I look forward to your reply. Thanks.
Angela

I need to transfer information through firewire cable and could not remember how it works, please, help

Please help, I need urgently to transfer information through firewire cable and I could not remember how it was that I do it. I've connected the computers and restarted one of them by pushing T on startup but it did not work.

Shut down both Macs. Connect them via FW cable.
On the Mac you want to copy FROM. Start up but make sure you are holding down the T key as soon as you press the power button. And keep holding down the T key until the FireWire emblem appears on the screen - that's the indicator that the Mac is in Target Disk Mode (TDM). Note: if you release the T key too soon the Mac won't go into Target Disk Mode.
Start up the second Mac. The first Mac will appear in the Finder as a disk. You can use the Finder to copy whatever you want from the Mac that's in TDM.
When you're done, shut down both Macs. The Mac that's in Target Disk Mode can be shut down by holding down the power button until it turns off.

I recently updated to the OSX 10.8.3 Operating Sistem. I am writing a book and now cannot open any word document I've created. Could not find a newer version of the Microsoft Word Processing Program. Is Pages the next thing? Can I recover my documents?

I recently updated to the OSX 10.8.3 Operating Sistem. I am writing a book and now cannot open any word document I've created with the old system. Could not find a newer version of the Microsoft Word Processing Program. Is Pages the next thing? Can I recover my documents? How?

I'm in the same boat: new to OS X and Mac, and in the middle of a book. I switched because I heard about the the ease of using Mac, but so far, for me, it's been a nightmare. I bought 2011 Office Mac and hate everything about it, the most recent being the inability to open or cut or paste any of my original word files. I understand that this could have easily been done with earlier versions, but not Mountain Lion (which I learned is what OSX is.) Since I work with language, I am amazed at the assumptions of the Apple community. It helps to use common language and explain even the basics.
So all the helpful hints to use the latest version of Office Mac are to no avail. Now what?

HT201442 why my iphone could not be restored ? and what is the meaning "this device isn't eligible for the requested build"

why my iphone could not be restored ? and what is the meaning "this device isn't eligible for the requested build"

Covered in this support article:
http://support.apple.com/kb/ts4451
Which, you used to get here. You need to read the article & go through the troubleshooting steps.

Terminal: could not open a new pseudo-tty

Since I upgraded to Leopard my Terminal started to misbehave. Many times when i open it or a new window or just a new tab, all it displays it the message:
Could not open a new pseudo-tty.
An I cannot type in it or anything. Even if I quit Terminal and try again the error persists.
Funny that this is not happening every day, maybe it's being cause by another app like HamachiX or something.
Does it log the actual error that caused the tty to not open in some log file? Has anybody seen this? I couldn't find any mentions even in google

One more thing, this problem only occurs on my account. When logged in on the guest account, I experience no issues. Just to test this, I also created another administrator account, and I also have not run into this problem.
Thanks Again

HT1923 I could not update the new version of itunes. I uninstalled the previous version, but I cannot get the new version to update on my windows 7 i5 pc..any solutions? thanks

I could not update the new version of itunes 11.1.4.
It told me to uninstall the old version, but I cannot install the new version.
Any help?/ solutions?
Thank you

Hello jasopz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best of luck,
Mario

Glom – Could not create the new database

I would like to try Glom, but always get the this error
"Glom could not create the new database. Maybe you do not have the necessary access rights. Please contact your system administrator."
This happens with both local and extern server configuration. Any ideas on how to fix this?
Regards,
Renke

It would also help, if you install the application and just tell me, if you get the same error, when trying to create a database. Maybe it's just a problem on my side.
Regards,
Renke

Could not make a new layer from the selection because the selected area is empty

I have Photoshop CS5 and I'm trying to do a selection on a new layer and when I copy it this message appears: "could not make a new layer from the selection because the selected area is empty"..
The new layer is selected, no other layer is selected. What the hell am I doing wrong???....Yes I'm a beginner.. ....please help?

Hi There,
So just to clarify you have made a new blank layer, made a selection on that layer and then done a Layer > New > Layer via Copy (or cmd J).
The reason that you would get this error message is you have made a selection on a blank layer (effectively selecting nothing) and tried to duplicate it and Photoshop won't let you do that.
When doing New Layer via Copy or New Layer via cut you selection needs to include some painted (coloured) pixels.
Regards
Paul
PS. Maybe you could explain what you are trying to achieve by copying the layer and I could help a little more.

I could not sync my new phone contacts with my laptop, and when i connect my phone with my laptop it delet my new contects, plz guide me?

i could not sync my new phone contacts with my laptop, and when i connect my phone with my laptop it delet my new contects, plz guide me?

Reinstall iTunes. I had the same problem.

I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/macBuild/../view/umenu.MacOS.mm.line 1351

I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/MacBuild/../view/umenu.MacOS.mm.line 1351

I'd search or post here:
http://www.macosxaudio.com/forums/viewforum.php?f=26

Why Solaris 10 could not remember my new configured IP?

Similar Messages

Maybe you are looking for