Why some files from my Dropbox can't be opened?

Why some files from my Dropbox can't be opened?
I have this problem for some time now. I don't have these issues in my other devices, my MacBook Pro and my Samsung Galaxy Note 1.

> LR2.2 and ACR5.2 aren't out yet, though, so you will have to wait a bit.
Don't let ACR5.x availability confuse you. IE, you won't be able to use any version of ACR other than 3.x with CS2. You will have to use the Lr2.x update when it's available, or use the DNG 5.2 converter if CS2 ACR3.x is your preference.

Similar Messages

  • Can't copy some files from Windows 7 to Mac OSX over network

    Hi,
    I'm running the latest version of Max OSX v10.8.4 on a brand new Macbook Pro.
    I have followed the setup instructions at http://www.7tutorials.com/how-change-workgroup-mac-os-x-easy-networking to access my Macbook from Windows, and http://www.howtogeek.com/howto/24950/how-to-share-a-folder-in-os-x-with-windows/ to share some folders from my Macbook to Windows.
    I am now trying to copy some files from my Windows 7 Pro (SP1) computer to my Mac, and have hit the following problems:
    I can view my Macbook in my list of local networked computers on WIndows, but I cannot access it. Clicking on it causes Windows 7 to try and access it, but then I get a message after a minute saying the network path could not be found. However, if I manually enter the IP address of my Macbook in the Windows address bar (\\192.168.0.191), I can view and access all the shared folders. I can never access the Macbook via it's computer name (\\MACBOOK-ROB).
    I cannot copy some files from Windows to my Macbook shared folders via Windows. There is nothing to distinguish these files from the hundereds of other files that I have successfully copied to my Macbook. They are pictures and music with no special characters in the filenames, not overly long filenames or folder paths, no access restrictions, or any other security restriction that I can see. However, every single attempt to copy these files to my Macbook results in WIndows reporting that access to the destination was denied.
    I have tried both these above scenarios on WiFi and Ethernet, and the results are the same.
    So:
    Why am I unable to access my Macbook by it's computer name on the network? How can Windows see it, but not access it?
    What are the limitations on transferring files over SMB that is (presumably) causing these specific files to fail?
    Thanks for any help you can offer.

    I have a fix for inability to copy files. I had the same problem moving a lot of old files across my LAN from a Windows XP machine to a Mac Mini running Mountain Lion. After confirming copy of some special file, I would get an error that terminated the copy operation, and info on the Mac side would show a locked folder.
    I finally decided to eliminate all special files on the Windows side, before copying, by running
         attrib -s -h -r /s /d [drive or folder]\*.*
    in a command window. Running attrib /?  tells what the arguments mean, but it doesn't explain that you need the *.* to make the command go through the hierarchy clearing the special attributes on all the files.
    After I did that, and then used drag and drop between two Windows Explorer windows (one on the Windows drive, on on the target drive on the Mac), the whole move operation ran to completion without stopping either for error or to ask for confirmation.
    I do not have a fix for the inability to access some computers by name rather than by IP address. I'm looking into the possibility of activating bind on the Mac but I haven't done anything yet.

  • I am new with iMac and I am trying to copy some file from my external HDD but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

    I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

    No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.

  • I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?

    I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Why do files from my Nikon D200 camera which are shot at 28MB come into Aperture at only 7MB?

    Why do files from my Nikon D200 camera which are shot at 28MB come into Aperture at only 7MB?
    I had these images in Large Fine JPG format at 28MB but when imorted and started working with them they are only & MB files in Aperture?

    Léonie,
    honestly speaking, I have done most of my image adjustments since 2006 (when I bought the D200) in various image processing applications (e.g. Capture One, Bibble 5 - now turned to AfterShot Pro by Corel, Lightroom at a friend's PC). I also tried Nikon's Capture NX but never liked it. Speaking of images that have been worth while keeping and working with as a RAW file I never saw any difference. As far as I can say with respect to Aperture 3 I come to the the same result as I did with the other software.
    People may say that with the disk space being so cheap now it is not worth while thinking about that. But there is one other aspect that can be of advantage in certain situations: The compressed RAWs are transferred faster to and from the the card than the uncompressed files. Also, the time for decompression in applications seems to be shorter than that saved while reading the smaller files.
    Before I started to use the compression feature (which in fact should be not lossless in the case of D200) I studied some reviews on that, of course.
    Citing one of them one could say
    "I tried to make duplicate shots to compare. I gave up. The mechanical exposure repeatability of my camera and nature itself aren't stable enough to let me make two captures close enough to see any possible difference between compressed and uncompressed raw.
    People do see differences. They are seeing fluctuations in their technique shot-to-shot, not any differences due to the compression."
    by Ken Rockwell
    If you are interested, here is the original article by Ken Rockwell.
    Another very elaborate investigation can be found here.
    Again, a quote from the controversal discussion on that comparison:
    "The ‘lossy’ NEF compression is really a clever use of information theory to save space by eliminating redundant raw levels. The noise which is unavoidably present in light effectively dithers tonal transitions so that the compression is *perceptually lossless*."
    by a poster named emil
    As far as I have read elsewhere, newer cameras as the D300 even have really "lossless" compression algorithms.
    Cheers,
    Michael

  • I erased some files in my cloud can i have it back ???

    Hi i erased some files in my cloud can i have it back?? thank you ????

    Hi Alexandra,
    Unfortunately, once files have been deleted from your Acrobat.com account, there's no way to recover them. But, when you uploaded your files, the copies on your computer remain, so perhaps there are some copies on your computer?
    Best,
    Sara

  • I want some files from zen

    hi all, first of all sorry for my horrible english.
    i am using gb zen v and last night i delete some files from media folder and its starting not showing album arts. i think this files neccesarry for showing album arts. i have used recovery mode and format and firmware update but its not show yet. can anybody upload this files your zen v to rapidshare? and when i doing format all pictures(coming with player) deleted. i want this two files from you please help me.this files inside the music folder.
    thanks for you.

    Most tax returns created by TurboTax require that you have the associated version of TurboTax installed to view or edit them.  And, as stated by tjk, you need the Mac version to view them on the Mac.  If you only have the PC versions of TurboTax and the files, you might want to consider either using BootCamp to dual boot your Mac or use a virtual machine like VMware Fusion to have a Windows installation along side your Mac installation.

  • I used automator to rename some pages files, and now they can't be opened

    I used automator to remove some text from the filenames of a group of pages files, and now they can't be opened. What went wrong?

    Did you by any chance remove the file type extension?
    Walt

  • HT204053 How do i move files from my dropbox app to my music app on my ipad?

    How do i move files from my dropbox app to my music app on my ipad?

    You can't.
    You have to add them from DropBox to iTunes on your computer and then sync them to your iPad

  • Hey guyys .if some 1 from firefox team can help it wud be great......I was using firefox 3.6.3 on Mac OS 10.5.8 and Today I installed firefox 3.0(besides application folder) but not in same application folder like firefox 3.6.3 ...so now i had 2 firefox v

    hey guyys .if some 1 from firefox team can help it wud be great......I was using firefox 3.6.3 on Mac OS 10.5.8 and Today I installed firefox 3.0(besides application folder) but not in same application folder like firefox 3.6.3 ...so now i had 2 firefox version 3.6.3 and 3.0....I had 3.6.3 already open ..i closed it to... open 3.0 ....when i opened 3.0 it asked me to import settings i said no....it opened well.....then i close 3.0 and tried to open 3.6.3 version ...now it was a problem everything got lost sessions, bookmarks, add ons, etc....it went back to default ....when i had 2 profiles in 3.6.3.....can any pls help me on dis 1...is there a way to restore my sessions, bookmarks and add ons ??? I have uninstalled 3.0 version now....??? pls pls pls ....help
    == This happened ==
    Just once or twice
    == today

    It turns out that the problem had to do with network accounts, even though it was not clear at first.  Redirecting the program to the local machine's cache with a network home redirector script fixed the issue.  Thanks anyway.

  • My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1). I was able to restart ok after installation; I even moved some files from my Galaxy 3 to the imac. But on the next (and all subsequent) restart attempts,

    My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1).
    I was able to restart ok after installation; I even moved some files from my
    Galaxy 3 to the imac.
    But on the next (and all subsequent) restart attempts, it hangs on the spinning wheel.
    How to fix? Thanx in advance.

    Mac OS X: Gray screen appears during startup 

  • I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?

    I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?

    Here is the direct Adobe page.
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • I accidentally deleted some files from iCloud, how do I recover the files if I do not have other backup or in time machine

    I accidentally deleted some files from iCloud, how do I recover the files if I do not have other backup or in time machine

    You don't.

  • When will the update be so that raw files from nikon d750 can be opened?

    when will the update be so that raw files from nikon d750 can be opened?

    I would estimate 3-6 weeks.

  • Migration Assistant Error Some files from ".journal" could not be transferred?

    Hello, world.
    A few days ago I replaced my the 97% full 100GB hard drive in my Dad's Core Duo 2.0GHz Macbook Pro with a 500GB but I received an ominous error at the end of the Migration Assistant transfer.  Here are the steps I took:
    1.  Replaced physical drive.
    2.  Booted up from OS X Snow Leopard disc.
    3.  Formatted new drive as OS X Journaled using Disk Utility.
    4.  Installed OS X Snow Leopard on the new drive.
    5.  When prompted by OS X Installation, I selected transfer data from another volume.
    6.  Placed the old drive in an enclosure and connected via USB.
    7.  At this point I let Migration Assistant take over.
    It took an hour and a half or more to transfer the data and everything SEEMS fine.  However, at the end I received the following error message from Migration Assistant:
    Errors and Warnings:
    - 2013-11-02 16:15:49 -0400 Some files from ".journal" could not be transferred
    - 2013-11-02 16:15:49 -0400 Some files from ".journal_info_block" could not be transferred
    I have searched around but I've been unable to find any information on this.  In other instances of these warnings, people seemed to be pointing the finger at moving from PowerPC macs to Intel Macs but this was Intel-->Intel.
    I did find someone suggest one other thing in another thread:
    "My reading of those error messages indicates that there's something wrong with the journaling files on the PB. I suggest that you disable and reenable it on the PB"
    However, I do not know how to enable or disable journaling without reformatting the drive from scratch as journaled or non-journaled.
    (post found here:  https://discussions.apple.com/message/8675337#8675337)
    Question:  Should I be worried and does anyone know specifically what this error indicates?  Is it possible that my dad's old hard drive was NOT formatted for journaling and MA was looking for these journal related files and unable to find them?
    Thank you all in advance for your help,
    Nick

    What options did you select for Migration Assistant to transfer? For instance, did you select network & computer settings?
    "Opt" sounds like the name of a folder, not a file type. On your 13" MacBook, do you have any folder by that name, especially in your home folder?
    Also, have you run Disk Utility's *verify disk* check on the MacBook's drive?

Maybe you are looking for