Why songs dwnlded have ! and error message cannot find file?

Why do some of the songs downloaded from other places than itunes are listed in itunes but cannot find the file? Where did it go? Please help!

Hello Ian,
From what I understand, this problem occurs because of the fact that DSC loads some DLLs dynamically in some of its VIs. Since they are loaded dynamically (instead of having concrete search paths), it takes LabVIEW a while to find them...if it takes too long, you will receive the error you mentioned.
From what I understand, this problem does not occur in the 6.1 version of the DSC module. If you are still using 6.0.2, the simplest workaround for now is to use the File >> Open option in LabVIEW instead of double-clicking on the LLB.
I hope this suggestion helps. Good luck with your application.
Sincerely,
Darren N.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

  • DTA won't run ... error message cannot find file

    I downloaded Data Transfer Assistant, and put it on my desktop.  When I run it, it says
    System Error: The system canno0t find the file specified.
    I found the DTA log file, all I find are a lot of entries showing...
    [02/21/2010 21:36:20] [information] [Nov  9 2009] [19:48:15] application exit
    [02/21/2010 21:45:03] [information] [Nov  9 2009] [19:48:15] application initializing
    [02/21/2010 21:45:05] [information] [Nov  9 2009] [19:48:15] application exit
    [02/21/2010 21:49:46] [information] [Nov  9 2009] [19:48:15] application initializing
    [02/21/2010 21:50:56] [information] [Nov  9 2009] [19:48:15] application exit
    no data, or what file it is looking for.  I tried running it from the Palm Desktop application folder with no luck.  I even tried Sysinternals Procmon to see what file it is failing on, but nothing made sense.  Any ideas?
    I have been migrating my Palm devices for quite some time, and was wondering if it was that my Palm Desktop applications may be in the old locations?  I don't know.  Everything on my old Centro worked just fine.
    Windows 7
    DTA 1_3
    Outlook 2003 SP3
    Palm Deskto 6.2.2
    Hotsync 7.0.2
    Any ideas???
    Thanks

    So I signed onto chat help, spent an hour or more.  The "tech" never really seemed to understand what the problem was, despite my making it brutally clear:  DTA had run, but would not now.
    It seems that there's something that stops Palm Desktop from transferring the entire calendar after ~2,000 events are sent.  It appears to hand on a specific date, but there are no events on that date or those bracketing it.
    I then exported Desktop's DBA file, converted it to ics, imported it into Outlook, and tried to run DTA.  Got that message that it could not find a file.  So I logged in as another user after putting the ics file on a thumb drive, opened outlook and imported the file and it was clearly all there.  Downloaded a new DTA, and it ran ... but then said there was nothing in outlook.
    So I copied the DTA file onto the thumb drive (thinking I had a live & working model), went back to my log-in.  Guess what?  It couldn't find a file to enable it to run.
    So I logged in as another family member, Opened outlook, imported the ics file, BUT had it import it as the base calendar, rather than as a new one.
    Again downloaded the DTA, ran it ... and it found the Outlook files, imported them, and is now integrating them into the correct calendar on the Pre 2.
    Terrible O+PITA, but it now works (I think).

  • InDesign CS 5.5 - Why am I getting an error message saying my files ( that I created in 5.5 ) can not be opened because they are created in CS6? Says I have to open in 6 and back save to 4.

    Why am I getting an error message saying my files ( that I created in 5.5 ) can not be opened because they are created in CS6? Says I have to open in 6 and back save to 4.

    Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
    Mylenium

  • Error message "cannot locate file"

    I purchased a new computer and used Detto Intelli Mover to transfer all my music files. When I opened the library, they all appeared to be there, but when I try to plan anything I get an error message "cannot locate file" This happens with all of my 1,200 songs. The error message also says "would you like to look", but I am unable to locate then. Can anyone help with this?

    Have you added all the songs to the library? Just by dragging and dropping?

  • Download error message - "Cannot Create File"

    Recently I developed a problem and am unable to download anything (files, software, etc) from any website. I begin a download, the download manager comes up and it shows an error message "Cannot Create File." I am using the default manager that is incorporated in OS X 10.3.9.
    I never had a problem until a week or so ago when I downloaded a software demo. I decided to get the full software package and trashed the demo files per the company's instructions. I got the error message when I tried to download the full program and now get the message no matter what I attempt to download. Might I have trashed a file I wasn't supposed to trash?
    I tried installing 10.3.9 again on my main drive but still have the problem. If I use an external hard drive with spare copy of 10.3.9 and make that my start up drive, I can download files successfully.
    Any help would be greatly appreciated.
    Dave
    2002 DP 1GH Quicksilver   Mac OS X (10.3.9)  

    Recently I developed a problem and am unable to
    download anything (files, software, etc) from any
    website. I begin a download, the download manager
    comes up and it shows an error message "Cannot Create
    File." I am using the default manager that is
    incorporated in OS X 10.3.9.
    I never had a problem until a week or so ago when I
    downloaded a software demo. I decided to get the full
    software package and trashed the demo files per the
    company's instructions. I got the error message when
    I tried to download the full program and now get the
    message no matter what I attempt to download. Might I
    have trashed a file I wasn't supposed to trash?
    I tried installing 10.3.9 again on my main drive but
    still have the problem. If I use an external hard
    drive with spare copy of 10.3.9 and make that my
    start up drive, I can download files successfully.
    Any help would be greatly appreciated.
    Dave
    2002 DP 1GH
    Quicksilver   Mac OS X (10.3.9)  
    I have the same problem ! Not being able to download a file from the Adobe site. I need Reader 7 to download some files from exact exams but can't do it. Just keep getting the Cannot Creat File message in the download window. Can anyone help?
    eMac 1.25 & G4 800 iBook   Mac OS X (10.4.5)  
    eMac 1.25 & G4 800 iBook   Mac OS X (10.4.5)  

  • Bearts Audio Control Pannel will not open. Get error message cannot find startup file

    Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
    Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel.  Looked for download to re-install BEATS Audio but cannot find one.
    Any suggestions.
    Sound works with IDT driver installed.
    Pavilion P7-1500Z

    Hi,
    Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
    Recovery Manager - Windows 8.
    Recovery Manager - Windows 7
    After the reinstallation has completed, restart the PC.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Scanning problem. Receive error message: cannot write file. Code 10,242,7. Please help

    I just purchased and installed a Canon MX 922 multi-function printer. I'm having a problem with the scanner in that the output after scanning cannot be displayed and is accompanied with an error message : Cannot write file. Code 10,242,7. This occurs when scanning documents and images. My operating system Windows XP (32).  Can anyone please help me solve this problem? Thank you.  

    Hello. Please try the following adjustment to see if we can resolve this issue: 1.  Open the IJ Scan Utility from your Desktop or the Canon Utilities listing of the Start Menu.2.  Click Settings.3.  On the left, choose the Auto Scan tab.4.  Click the Defaults button on the lower right.5.  Continue this process with each tab on the left.6.  Click OK at the bottom of the Settings menu. Once this has been done, try scanning from the IJ Scan Utility to test the unit. If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.

  • Syincing error message "Cannot find required disk" - Help!

    I have a third gen 4gig nano that I got at Christmas. I added two CD's onto it when I got it. Now, however, I'm having trouble syning anything else - that's all I've been able to put on it are the two CD's even though I've added more into my library. I keep getting the error message "Cannot find required disk". Can anyone help me or tell me what I need to do?
    Thanks in advance!

    Even though you're not getting a -50, I'd check on the following document. (Your message is one of the possible symptoms of the problem outlined in the document.)
    iTunes displays -50 error message when syncing iPod on Windows XP

  • Have down loaded latest I tune software and error message cant find I tunes library appears?

    latest I tune software loaded and error message can't find I tunes library appears?

    Hey andcar1,
    Welcome to the Apple Support Communities. If iTunes cannot find the library, you can look on your computer to find it. The following article will assist with finding those files.
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    This article is informative and will let you know where files are typically located on your computer.
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Regards,
    -Norm G.

  • Import budget by using DTW, error message "cannot find this object in B1 application defined, object defined error 65171

    Dear Sirs, I try to import budget header and budget line by using DTW, however error message found, "Cannot find this object in B1 application defined, object defined error 65171. Regards, Saw Hua

    Hi Javier,
    Please check below links.
    DTW Error 65171
    DTW error 65171
    DTW, Unkonwn error 1005!65171
    DTW error 65171 - Cannot find this object
    DTW error65171
    SAP B1 Data Transfer WorkBench : Data too large... | SCN
    Hope this help
    Regards::::
    Atul Chakraborty

  • Error message, Cannot find iTunes Connect user

    I cant access my I tunes from my Iphone, I get the following. Authentication Error. Cannot find iTunes connect user (2002)(2002)

    Hello wallydt,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check USB connections
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
    Best of luck,
    Mario

  • Error message Cannot find mozilla run time

    When trying to access Firefox on my PC get message Cannot Find Mozilla Run Time. OS Windows XP

    hello gwojcik, can you test if the problem is still there after a clean reinstall:
    *download the full firefox setup file from getfirefox.com
    *uninstall firefox on the machine
    *manually delete all remaining files in the firefox program folder, which usually resides in ''C:\Program Files\Mozilla Firefox\''
    *reinstall firefox

  • Error message cannot find song

    Every time I try to buy a song on iPhone I today started to get error message (can't find song) I search a song it finds it I press buy and I get error message can't find song I'm signed in an iBooks also signed in I restarted , restoring login logout everthing I read on Internet. I think it just won't let me buy till I update software?

    I think there was a update to the iTunes app the other day but I can't be sure

  • Songs go missing and Error message when connecting?

    the songs on my nano go missing but the space is still used, and when i hook it up to my computer i get an error message saying that it cant read the ipod? what is this?

    hi Adam!
    i get an error message saying that it cant read the ipod?
    what is the precise text of your error message?
    love, b

  • Error message: cannot find flash.ocx

    After receiving a POP UP for a free Adobe Flash Player I
    choose to install it. Since then I get at least 50 POP UP messages
    saying the same thing..(I have to "X" out of them to continue
    processing) "Cannot find flash.ocx" - how do I either fix it or
    delete it.

    This has been a problem for quite a while in our company and it's pretty much an everyday occurrence.
    We have around 500+ that get the exact same error: cannot find flash.ocx
    The work around we use is to copy the Flash.ocx file from one PC that still has it and paste it into the C:\WINDOWS\system32\Macromed\Flash directory of the PC that has the problem.
    In our case renaming the current updated file Flash10d.ocx to Flash.ocx also works but this may not work for you.
    Now the two work arounds above are fine but as soon as adobe has an update the file is once again replaced with the latest updated file! And you have to perform the work around again.
    You can see what the update does by looking at the install.log file located in the same directory. It’s just a text file so you can view it in Notepad C:\WINDOWS\system32\Macromed\Flash
    Bellow is a snipet of log file:
    IfFileExists: file "C:\WINDOWS\system32\Macromed\Flash\UninstFl.exe" does not exist, jumping 948
    IfFileExists: file "" does not exist, jumping 952
    Delete: "C:\WINDOWS\system32\Macromed\Flash\Flash.ocx"
    Delete: "C:\WINDOWS\system32\Macromed\Flash\Flash6.ocx"
    Delete: "C:\WINDOWS\system32\Macromed\Flash\Flash6a.ocx"
    The bellow does not work but interesting at that:
    I did try editing the screen saver file directly to point it to a different directory, in which I would then place the Flash.ocx file but unfortunately although the .scr file can be viewed in Notepad, making a change to the file will destroy it. Please make a backup of the file first if you want to see whats inside. You can use Ctl + F to search for Flash.ocx etc..
    Although not really a hindrance in day to day work screen burning could potentially be an issue!
    Hope this helps someone.
    Thanks,
    Simon

Maybe you are looking for

  • I can't sync my ipad2 after updating to ios5. Says 'waiting for changes to be made'. Any ideas?

    I can't sync my ipad2 after updating to ios5. Message is 'waiting for changes to be applied'. Any ideas?

  • Script works in PowerGUI, not in ISE or from powershell.exe

    Hi, I am trying to integrate with the Manage Engine Password Manager PRO Rest API.. I have some code working on my desktop where I currently use PowerGUI this was all seemingly working correctly.. I have then gone to execute the code from a window on

  • Global Temp tables in standy-by db

    Hi All, Can i use Global temp tables in a stand by database? The temp tables will be used for dml purpose. oracle version is 10g R2 RHEL 5 Thanks, Ajay Kumar

  • Lines in PDFs from AI CS2

    Ever since we switched to CS2 over 2 and half years ago we've had problems with PDFs out of AI. We have to embed all images otherwise there are lines that run across the pdf pages. Embedding solves the problem but its time consuming on some jobs espe

  • Tricky Java UDF

    Hello Sdn I have bit tricky problem to achieve through java udf in XI. We have to parse a tricky text in java. Source has a text field : ST - 102RP34;RP - 234ST89;VT - 90789ST; So the souce text field has a qualifier - value; In target , I have 3 rep