Why sound not working after publishing?

Hi,
I got some strange problem with sounds.
Just published my app, and when I am running it locally it's working fine, but once I am putting it on my site there is no sound there...
(tested in the same browser)
Any ideas?

Hi,
Do you face this problem even with a single slide project? Because this seems to be working fine at our end.
Also, is it an upgraded project, single click or double click?? Does it happen only on few slides or all slides with mouse click sound.
Thanks,
Sikandar

Similar Messages

Top Nav buttons not working after publish, but works in app. WHY?

I have tried to find out why these buttons will not work after publishing. They work fine while in the iWeb app, but not when publishing. I do not have any objects near the top nav buttons. The first site went off without a hitch
<www.serenitycustompools.net> the second site began the problem with the last page, the nav buttons would not work. Now this 3rd site, none of the nav buttons at top will work after publish, but will work in app. Anyone else having the same probs? None of my pages have the same names or any punctuation marks, and they are simple one word named pages.
mini intel Mac OS X (10.4.9)

They all work for me, try clearing your browser cache or using another browser.

Sound not working after checking for driver updates and resetting bios

I am running a (HP Pavilion dv7-6c60us Entertainment Notebook PC)
I had muted the sound and did a system upgrad prompted by my HP assistant after logging on. Now when I try to get sound nothing happens. So I went out to the support site and checked for driver updates and none were found. So I then went into my system bios and reset it as stated in a support for sound not working and still no sound. HOW DO I GET MY SOUND TO WORK AGAIN?

From your models support page Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Sound not working after installing ios6

Sound not working. After double clicking bar at bottom has the line for sound but button to slide is mssing

Uninstalled IDT software from programs, removed/rolledback the drivers, downloaded the HP Support Assistant and it recommended an IDT software, installed that via HP Support Assistant. Everything is working fine now.

Sound not working after resuming on maverik

Sound stops working after resuming my Mbp. Reseting PRam solves this issue but its tempory. I have to restart my system everytime this issue occurs.
I have one more issue regarding sound, which might be just another bug.
When I plug my headphone, sound doesnt switch to head phone and I cant switch manually too from system preferences. To fix this issue, I have to close the lid and wait for a while for system to sleep and resume system. after resuming, Os starts detecting my headphone. strange!

For those of you reading this just thought that I would update you. After spending 90 minutes on the phone and resetting/restoring the phone twice, with two different level of tech support they have deemed this a hardware issue now. This phone worked perfectly fine before the ios 6.1.2 update that was done yesterday. Worked fine, played music, took calls, did all the sounds, then updated and now nothing!
Our family has 4 iphones, several ipods and 2 ipads. I am now left with a phone just out of warranty (by 2 mo) and no choice but to pay the $200 to apple to get another phone. Apparently this is a steal because a new 4s costs $600.! lol. I am greatly disappointed. I have been given the corporate phone number and assured that there would be someone in customer service to talk to, but there was not, no surprise to me. Anyone else have any suggestions?

Sound not working after some time

I am using pavilion g6 laptop. Nowadays my laptop sound stops working after some time of use. I checked the drivers but everything seems to be ok. Please help what to do??

Hi sushovanee,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp you have a G6 notebook and after a period of time you lose the sound.
Have you done all your Windows updates?
Have you ran The HP Support Assistant to aid with this difficulty.
Has there been any recent changes to your system?
To assist you I will need some more information.
What exact model of G6 do you have?
How Do I Find My Model Number or Product Number
What Operating system are you running?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Why the click sound is not working after publishing?

Hello all.
I have around 190-200 slides in my project. I want my mouse object to have the click sound in some slides and without click sound in rest of the slides.
Using its properties panel I have added click sound for the required slides. But after publishing the project I am unable to hear the click sound. When I refresh the page I could hear the sound. Why does this happen?
Regards,
Kartik.P

Hi,
Do you face this problem even with a single slide project? Because this seems to be working fine at our end.
Also, is it an upgraded project, single click or double click?? Does it happen only on few slides or all slides with mouse click sound.
Thanks,
Sikandar

Hyperlink is not working after publishing my site!

I can fully activate my newly added page on my iweb site with no problem. I created a button and hyperlinked it to the newly created page. After I publish my site, the new button is NOT clickable. I created a new photo gallery page. I already have 1 photo page so when I clicked on that page, at the very top I am seeing a clickable link that will lead me to my newly created page. THIS IS NOT HOW I HAVE IT SET UP THOUGH! I have a button on my home page that if clicked, it will take you right to the new page! I tested it and it works! I go and publish my site and all the sudden it does NOT work!!! Anybody have a clue why this is?

Turn on DB logging and see what the syntax is that CR tries to send to the Server. You can also enable crlogger ( search for this and you'll find a KBA on how to enable or DB logging component )
First guess is the Date format is wrong, typically is the cause. try removing the date from the SQL and see if that works. Then try to add the selection formula in CR Designer and look at the SQL being generated
Can be specific because you did not mention what DB you are using.
Don

HP Pavilion DV5000 : Conexant Audio HD sound not working after upgrade XP to Windows 7

On HP support site there are no drivers for Windows 7 for Conexant Audio HD soundcard in HP Pavilion DV5000.
Have tried installing Vista drivers in stead, does not work.
Have tried renaming unzipped Vista files to camcaud.sys & camchal.sys and copied them into Windows/System32/Drivers and reboot, does not work.This is the only solution I found after reading forums for several hours, but does not work.
Would very much appreciate help.
Thanks.
This question was solved.
View Solution.

My solution is here (registry editing required):
Conexant audio (vendor 14F1, device 5047) – no sound on Windows 7 – solved

Satellite M100 sound not working after installing Windows 7

Everything else is working after this upgrade except the sound. Have tried everything. Any suggestions?
Many Thanks.
Rory

Hi,
For me the case is clear: Windows 7 is not the market as yet and its not released as yet. So I think this is the problem.
Anyway, have you tried to install the driver from the Toshiba website? There you can also find the Synaptics driver. Its for Vista but normally the drivers for Vista are also work in Windows 7. Its worth a try.
http://www.csd.toshiba.com
Have you tried the key combination FN+F9? So you can enable and disable the touchpad but I doubt that this works. Normally you need the Toshiba utility for this
Greets

Sound not working after update on 4s

Completed most recent software update now no sound is working, either in or out.

For those of you reading this just thought that I would update you. After spending 90 minutes on the phone and resetting/restoring the phone twice, with two different level of tech support they have deemed this a hardware issue now. This phone worked perfectly fine before the ios 6.1.2 update that was done yesterday. Worked fine, played music, took calls, did all the sounds, then updated and now nothing!
Our family has 4 iphones, several ipods and 2 ipads. I am now left with a phone just out of warranty (by 2 mo) and no choice but to pay the $200 to apple to get another phone. Apparently this is a steal because a new 4s costs $600.! lol. I am greatly disappointed. I have been given the corporate phone number and assured that there would be someone in customer service to talk to, but there was not, no surprise to me. Anyone else have any suggestions?

Sound not working after 10.9.4 Mavericks Update - HELP!

My sound does not seem to be working following the latest update to Mavericks (10.9.4). I am running a 2012 Retina Macbook Pro. Sound does not work with speakers, headphones or built-in sounds. Before anyone asks, no its not on mute, I have checked the Audio Midi setup and Sound settings and everything is as they were prior to the update, so the sound should still be working.
I have tried resetting the SMC and PRAM, no luck yet. Also tried re-installing the update but did not work.
Any help is greatly appreciated!

So I had the same problem; Actually other problems occurred after upgrade 10.9.2 (Thunderbolt related issues) and now after upgrading to 10.9.4 my internal sound disappeared.
The solutions described above made it worse; Sorry sykosoft .. but your solutions is even dangerous ;
I spend almost a Day finding out how to restore my internal audio devices ..
So what I discovered, this is a software issue;
Update on update on update without any clean install resulted in some filty .plist files
com.apple.audio.DevicesSettings.plist
com.apple.audio.SystemSettings.plist
looking in those files I discovered some settings pointing towards RabbitEars .. perhaps I tried it once in a previous life but now I do believe the upgrade took by incident the wrong 'device' as standard ..
So I looked up and the only thing I could do was finding .kext and other related stuff .. only able to remove it commando wise = terminal
after rebooting for the 722th time performing a SMC and PRAM for the 666th time the result was ... NO STANDARD devices detected
THe only solution working is :
A recovery install;
https://www.apple.com/osx/recovery/
In my case I encountered a problem; My recovery failed (reboot press and hold CMD+R, selecting install fresh OS X)
I find out it was due to my FileVault encrypted HD; So first I uncrypted (switched off FileVault) my HD, and even created a USB recovery disk (not needed)
Tadaaaa 45 minutes later all problems solved, without loosing data or reinstalling all programs ..
*feeling relieved* I thought sharing my pain and solution would save you hours finding out how to repair, hoping PRAM and SMC reset would solve it ..

Sound not working after booting

First of all, I have tried to uninstall and then install again the drivers of the sound card for W8.1
The sound does not work if I have switched off my laptop and then boot it. If I reboot it, the sound works. It's just when I have switched off it from Windows (maybe because W8 does not a complete switch off but a kind of hibernation).
In the audio mixer of the tray the green bar which shows when it's playing sound works like it's working and if I plug some headphones on the jack port they work like a charm,
Any idea of what's happening? I've just bought this laptop last week and I'm very happy with it apart from this thing

From your models support page Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Sound not working after reinstall

I have a Toshiba Tecra A8514 and I had to re-install my windows XP and since then my audio is not working, I have tried to install the audio driver on the site but that didnt work, any help on the matter would be great.

So you installed this driver without success.
Realtek HD Audio Driver for Windows XP
My guess is that you did not install in the correct order. You might want to start over. It's important to install the chipset software followed by the display driver before any other driver.
--------------------8<------------------- <snip> ------------------
Install them in this order. Restart after each driver and take the time to test between drivers. Some will apply and some won't.
Chipset software
Display driver
Sound driver
Modem Driver
If your machine has the internal WiFi card, then install the WLAN driver
ACPI Common Modules
Toshiba Console
Display Hotkey utility
Touchpad Driver
Toshiba Power Saver Utility
Toshiba Controls
Toshiba Utilities
--------------------8<------------------- <snip> ------------------
I would restore the hard drive myself. All this stuff is correctly preinstalled. Replacement media can be ordered by calling Toshiba Customer Service at 800-457-7777. Have the computer's serial number and a credit card handy.
-Jerry

Code added to template not working after publishing

We want to track the usage and see who is hitting the pages and where they are hitting them from. A developer at our company who wrote some code for us to be able to do this using an includes file. When we place the code directly into the HTM page using notepad (after publishing) it works fine. When we put the code into the template (.HTT) and then publish it, that code does not appear in the published page.
Is there a setting in the template that would not let us throw a line of code for a server side include in the RoboHelp WYSIWYG editor? Or how do you add such code to the template and have it pull into every page it displays?
Using RH8, publishing WebHelp and not using RH Server.
Thanks.

This question is related to webhelp, not Microsoft HTML Help (CHMs) so I have moved it.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Why sound not working after publishing?

Similar Messages

Maybe you are looking for