Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?
If that's the best you can do why don't you get on another forum?
Similar Messages
-
I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8. -
I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س
MS Word for Mac has never supported Arabic. You have to use other apps. Mellel is best, but Pages 5, TextEdit, Nisus Writer, or Open/LibreOffice should work OK.
Sometimes you can make Word for Mac do connected Arabic if you are editing a document created with Windows Word. -
new itouch won't connect to wi-fi, has wi-fi sign on top, but is not really connected, called apple support they told me to take it back and get new one, but same problem please help
Test it on another network--like at McDonals. If it works there, you got an issue on your home network--like a router setting.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I have have two itunes accounts. I want to merge the two accounts. How is that accomplished?
You cannot merge accounts.
Sorry -
I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email
If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..
-
In SAP BW landscape we should have separate servers for DEV, QA and PROD
Hi all,
In SAP BW system landscape we should have separate servers for DEV, QA and PROD.
whether one server is enough for DEV and we can use virtual servers to QA & PROD?
Regards,
chanduHi chandu,
In my previous Organisation we got exactly the same landscape for BW as you described.BCS(BAYER COPSCIENCE LTD) operates a BW System Landscape with one centralized Global Development System and three regional Quality Assurance and Production Systems located in Europe, Asia Pacific and Americas. This Landscape is to ensure consistent data models to be available in all regional systems as well as to minimize development efforts and make use of respective synergies.
This is perfectly working for BCS ,and I think, this is the most approriate way of handling of resources.
Regards
CSM Reddy -
I have recently purchased an album from iTunes but although I see it in my music library none off the songs play they just skip through to the next one repeatedly. I since downloaded another song and this work perfectly
Does this only happen with the tracks you have downloaded from the iTunes Store? Perhaps you should work the suggestions in this Apple support document first.
Troubleshooting songs that skip on iPod
B-rock -
I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?
Hi,
that's because Logic reads the volume information out of the imported MIDI tracks and sets the volume fader according to this information. The MIDI information overrides volume settings you have done, so you have to identify the MIDI events that contain volume (or expression or pan or whatever) information and delete them. You can use the event list editor for this.
Fox -
I bought my first itunes redeemable card ($15). Redeemed the code. Bought a few songs (had a balance of $8 and some change). Few days later went to buy another song and it charged my bank debit card (that I HAD to enter). Since it debited it out of my bank I haven;t purchased anthing else untilI know what's going on and now I have a $6 and somechange balance? What am I doing wrong or is it itunes? How do I maked it where it will take it off by itunes balance and not what seems to be from both?
Where did you buy this laptop? I know if I opened a box expecing and having paid for a 2012 model and found a 2010 model, I'd be back at the store demanding an exchange quicker than you could imagine. Open box or not, if you thought you were buying a 2012 model, you should get what you paid for.
-
hey guys, iv recently changed over from the 4 to the 5 and i have lost my 5. Luckily a few days ago i downloaded find my iPhone but when i log in it tracks my old phone and not the new one. I have logged in so i dont know why it wont connect. I'm really upset about lossing it, if anyone one knows how to fix the problem or another way of tracking my phone that would be great.
The iphone 5 can only be located if connected to a data or mobile network. If in Airplane mode or switched off, it can't be found.
Check this article for more info:
iCloud: Troubleshooting the Find My iPhone app -
my songs wouldnt play on my ipod so i deleted the songs on the ipod and went to the purchased section in itunes to recover like i did with another song and my purchase history i blank, how can i get them back?
Maybe you have multiple accounts that's why your purchase history is empty. You can try checking for possible Apple IDs that's existing for you or you can ask for assistance from support.
http://www.apple.com/support/itunes/ -
How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please
iPods (except for iPod touch) are not linked to any iTunes "account." They are associated with your iTunes library. The account in iTunes is your Apple ID, and that is used to buy and download content from the iTunes Store. It is not required to use an iPod.
The 1st (and 2nd) gen shuffle can only be used with one iTunes library at a time. When you connect it, iTunes should prompt you to start using it with your iTunes library, and warn that the shuffle's existing content will be erased. Have iTunes erase the shuffle, and it will be associated with your iTunes library going forward. You can then add content to your shuffle.
The need for the previous owner's Apple ID and password should only come up if you are trying to transfer existing content from the shuffle to your iTunes library, AND the previous owner had content purchased from the iTunes Store. Just cancel out of that step, if iTunes asks. -
I'm trying to update apps and download new ones on mi ipad, but it doesn't work... the icons say "waiting" and nothing happens for days!Help!
Here are a bunch of things that you can try to get the downloads to resume.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
How do I watch my iTunes movies, tv shows on my mac without having to download them all to my HD? I really want my Mac to function like my Apple TV since I have just moved and don't have my TV for another few weeks. Since I purchased my three Apple TV. I have had no need to download any of my movies to my Mac. Which has been great. However, I remember that I used to now have to do this... or did I? I am just frustrated because I want to stream all this stuff vice haveing to waiting for it all to download fill up my Mac's HD and then just delete. Someone help please?
Play the movie in iTunes to stream it.
Click the cloud icon to download it.
Maybe you are looking for
-
We're looking at designing a results page that has several sections. Depending on the type of job (variable passed to that page) we want to show different items, buttons, reports, etc in each section. Some sections may be used for multiple types of j
-
Help required on iPlanet Web Server.
I am using iPlanet Web Server 4.1 to run my jsp' ans servlets. I need to know that if i write System.out.println("Hello World") statement in my Servlet, where it will get printed. Please let me know if theres some way for that. As this is very help f
-
How to view pre-built Dashboards and Reports of Oracle BI- Apps?
Hi All, We have sucessfuly installed and configured the Oracle Apps, and also we configured the OracleBIAnalyticsApps.rpd and we are able to view the different subject areas. But we are facing problem in viewing any prebuilt dashboard or report. Is i
-
Would Like to Upgrade to Leopard - Where Do I Begin?
I would like to upgrade to Leopard, but I have a few concerns. My MacBook Pro was purchased in June 2006, so I think right when they were first available. I was running a trial version of Boot Camp, so about 40% of my hard drive is running on Windows
-
Consistent gets/physical reads issue
Dear all, There are not any of DML on table tb_hxl_user. First Select: SQL> select count(1) from tb_hxl_user; COUNT(1) 286435658