Why suddenly all these Java error messages since upgrading to Lion?

Since I upgraded to OSX 10.8.2, suddenly I'm having no end of error messages having to do with Java not running—everything from coupon printer plug-in to online games not functioning anymore. All of these worked fine in 10.7.4. Is there a fix?

Since it is such a seething whole of exploits, Apple has disabled Java by default, both the JRE and the Web Applet launcher in Safari.
If you try to run a Java application, it will ask if you want to install it.
If you're just using web applets, you won't get asked. So, open Java Preferences which is in the /Applications/Utilities folder. It will ask if you want to install Java.
Then, open Safari preferences, Security tab, and enable Java.

Similar Messages

'Bluetooth not available' error message since upgrading to Leopard

Hi, I regularly seem to get a 'Bluetooth not available' error message since upgrading to Leopard, any ideas why, have to reboot to shake it.
cheers
Simon

I solved the same issue by resetting the SMC. With the computer off, remove the battery and press and hold the power button for 5 seconds. Then reinstall the battery and restart. I haven't had any bluetooth issues since.

Error message since upgrading iTunes

I recently upgraded to iTunes v7.1.1.5 and have since been getting an error message that states "RTHDCPL.EXE Illegal System DLL Relocation". I am running an HP Media Center PC with Windows XP Media Edition. Any advice on how to fix this error?

Hi, Peter8251.
I don't have any first hand knowledge of this problem but a quick Google Search suggests that it is not at all connected with your recent upgrade to iTunes 7.1.1.5.
There are a number of suggestions offered but if I were in your situation, the first thing I'd try is downloading and installing this MicroSoft Update .

Dyld Error Message since upgrade

Hi,
Upgraded to SL. Mostly OK, but some applications (Apple Motion, Compressor, Aperture) all crash with same message:
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Motion.app/Contents/MacOS/Motion
Reason: image not found
Well, its right. The image is not there. But presumably it was before upgrading. Anyone know a simple way to fix this?
Thanks,
Dan

What versions of these programs do you have?
Also, can you post the whole crash log here?
In your home folder, Library/Logs/DiagnosticReports/

Why do i keep getting error messages when upgrading my iPad OS?

I have been trying to upgrade my iPad OS but during the process i keep getting error messages Does anyone have any idea why this is so?

seyi wrote:
I have been trying to upgrade my iPad OS but during the process i keep getting error messages Does anyone have any idea why this is so?
My first inclination is to answer your question --- yes - something is going wrong! I'm sure more specific information will be needed to help you.
Are you getting a specific message? An error code number? Can you describe exactly what you are doing when you get the message?

DVDAE error message, since upgrade to DVDSP4

Hi,
I just checked my projects for errors with the Demo version of DVDAfteredit. There I got the following errormessage for all projects i builded with DVD_SP 4:
#PGC Command Errors
#PreCommands from "Subpic-mapping»Video Title Sets»VTS 1»VTSM 1 Menus»Deutsch»VTSM PGC 59"
12: GoTo Line 15
* Line value too large. Only 14 instruction lines in Pre-Command Area.
The error occurs on 7-8 different PGCs aleways in this VTS.
I didnt had this error on projects build with DVD SP 3.
As i see, DVD SP internal scripting is building a "goto" command that is jumping behind the last line.
As i dont understand the whole script, i dont know when this wrong goto command might be executed and how to correct this.
I believe a cheap programmed Player may fail when it comes to this command.
Can someone confirm this error, or better direct me to a solution?
As i have DLT deadline in 2 days im a bit frightened about that thing. (I dont want to think about the yet replicated discs...)
Thanks,
Matthes

Thanks Matthes,
I agree with Aldershot. It sounds to me like it is just a DVDSP issue. I wanted to know if myDVDEDit agreed with DVDAE, and it does, so that clearly rules out any mistake that might have been made by DVDAE. In essence, you got a second opinion, and they both agree.
Sounds like something in the project upgrade, or just the build got lost.
What does the script mean, is another question. The GoTo command is a way of nesting multiple command strings within the same script.
For example:
If r0==1 Goto10
If r0==2 Goto20
Now, I might have two somewhat unique scripts that start on line 10 and on line 20, and I don't want to execute both of them, just one of them. So I create a condition based on a register value that will execute either one of these two scripts based on the value of register 0, aka r0.
GoTo is actually a command you can learn, and use within DVDSP's own scripting capabilities. So it's actually in your user manual as well. Many spec commands do not exist in Apple's DVDSP script IDE, but Goto does exist there. As you learn to script, you will sometimes run into a situation where one set of script commands doesn't actually perform the duty you would like. You will create an IF THEN approach, and that is what Goto offers. It allows me to split a script in multiple scripts, all within the same larger script.
That's a bit abstract to think about, but I hope it makes some sense.

Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.

Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.

Hi Tom,
Looks like we have problem here as we see another blank post from you here. It's probably something to do with your email. Let me send you a PM with my email address and we can communicate that way.
Thanks,
Kevin

HT2404 When I try to download free updates for apps, I've suddenly started getting an error message saying: You cannot update this software since you have not owned the major version of this software." But I do own the apps. And I haven't changed my ID

When I try to download free updates for apps, I've suddenly started getting an error message saying "You cannot update this software since you have not owned the major version of this software".
But I HAVE owned the software, for ages. (And, in any case, the apps in question are all free.)
And I don't have multiple Apple IDs.
What can I do?
Any advice much appreciated

This can occur if you bought the machine used and iLife was reinstalled with another AppleID.
This also can occur if the "free apps" you downloaded have paid upgraded versions and/or are now payware and you can't get updates.
All software from MAS is copy protected, it might be free as in "no charge" but it's not free in the sense you can share it with others.

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still gives me the same mess

In the details it is mentioned that it is an outdated version of Java.
Is this a security risk that i need to live with to get CS5 to run with Yosemite?
Also i need to reject messages from Java in the future about updates, or not?
thx for any input

Accessory error messages since iOS3.1.3

Dear Apple --
I'm frustrated.
I have a 32GB iPhone 3GS which has worked pretty darn well since acquisition last year.
But suddenly it started displaying error messages sometimes when connected to *the same cables* as I've been using since purchase — that is to say, the AT&T-supplied car-charger, and the Apple-supplied USB cable and AC adapter — which messages reportedly indicate accessories which were not properly Apple-licensed.
First, starting with iOS 3.1.3, “Charging is not supported with this accessory,” mostly (but not only!) seen with the car charger.
Now, starting today (not the first day running with iOS 4.0.1), "This accessory is not optimized for this iPhone ... You may experience noise caused by cellular interference and a decrease in cellular signal strength."
It seems unlikely that the car-charger from the EXCLUSIVE cellular carrier of the iPhone would not be properly licensed. It seems even less likely that the Apple-branded USB and AC adapters would not be properly licensed or not optimized for the iPhone with which they shipped. I can think of no good reason why these accessories would suddenly not be good enough.
This didn't start after a moisture incident with the phone (and in fact there have been no such). This didn't start after an impact incident (of which there have been few, and none severe). It started spontaneously -- and again, the messages are intermittent, which doesn't match to any reports I've seen about either moisture or impact damage.
There has been no mistreatment of the cables, and there's no spooge buildup in either phone port or cable end.
All that's left is software, and the only software that fits the picture is the OS.
So what's the deal, Apple?
Why do I have to disconnect and reconnect two or three or four times to get a nice big green battery image, instead of any one of several alerts complaining about my charger? Why do I have to watch to make sure that the charging status doesn't change when I put the phone down while connected to the car charger?
Why has this *gotten worse* with each update since 3.1.3, instead of getting better?
Your swift resolution of this issue will be most appreciated.

I am experiencing exactly the same issue. I live in the UAE and iphones are not serviced here. Ridiculous, really. I feel your pain. And no response from Apple?

GETTING JAVA ERROR MESSAGE

does anyone knows the fix to java error message i am getting on my BB curve? I recently upgraded my OS to 6 and since then everytime after reboot its giving me error and as well, won't install my bubble breaker

Hi I have same problem with other problem first I experince uncaught exceptin. Java.lang.error. And after some time second error net.rim.device.api.system and now when I am working on BB suddenly the colors evaport and Screen become white. Are these problems are Java Related?or Software? Or it is technical problem

I have Mac OSX 10.5.8 and get java "error" message when trying to use research tool on Morningstar Java referred me to Apple but they had no update.Any ideas? thanks.e

I have a imac OSX 10.5.8 and get a java "error" message when trying to use a research tool on Morningstar.Java referred me to Apple but they had no updates. Any ideas? thanks.

Well I solved my problem.
What still doesn't make sense though is that dragging iTune audio files directly on to the iTunes application icon gave me the error message... which is why I originally discounted it as being a potential link problem. If I had been able to get files to open normally (i.e. without an error message) I would have known it was a simple link problem. Strange.
Anyway... relinking my folder of audio files did the trick.
If you don't already know how here are the steps...
iTunes > Preferences > Advanced > click on the "Change" button and browse to the folder that contains all of your iTunes audio files... that's it.

I have been exporting lightroom webgaleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - thoughts?

i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?

Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.

I purchased microsoft office mac in 2004 and suddenly I get an error message. It won't launch. I click reopen and it does the same thing. I get a long message in the panel. It tells me it will send a report. I still can't access any microsoft item - word

I purchased microsoft office mac in 2004 and suddenly I get an error message. It won't launch. I click reopen and it does the same thing. I get a long message in the panel. It tells me it will send a report. I still can't access any microsoft item - word, excel, nothing works.
I have a mac book pro 10.6.8
Thanks

cassidy3 wrote:
Good news is that I can access all my documents. Bad news is I had to pay $150 for it.
I spent a lot of time trying to find a solution before buying. I did not try the launch terminal solution....
I will check back so I can find out what to do should this happen again.
More possible bad news. If you had followed what fane_j had asked you to do you might have found out it wasn't microsoft's fault for your problem and wouldn't have had to spend $150. Because while you may have an Office that works, fane_j was not suggesting a solution but probing for a trojan (google "flashback trojan") that has been crashing powerpc code which is what Office 2004 is.
So if you do have the trojan, while you can run a version of Office, the trojan may still be in your system since installing a version of Office isn't going to remove it. So I'll make another request. Launch Terminal (in your Utilities folder) and copy/paste the following line into the terminal window and hit return:
defaults read ~/.MacOSX/environment
If you see anything other than a "does not exist" error message you almost certainly do have the trojan and post the results in this thread.
The choice is yours. You can ignore this and take the risk. Or do what has been requested.

Why do I get an error message in safari 5.1 telling me to restart in 32 bit mode in order to "view the movie" when I first start safari on opening page?

why do I get an error message when I start safari 5.1 telling me I need to open browser in 32 bit mode in order to "view movie" ? This occurs when I start safari on the opening page (the page with all the boxes for most viewed web sites). This had never occurred with safari up until the latest updates to safari & OSX [Version 5.1 (6534.50)] and OSX 10.6.8.
also, I'm not trying to view a movie - this occurs for the page previews that load when safari opens.
thanks.

go here:
http://get.adobe.com/shockwave/otherversions/
choose "different version">full 64 bit and download - seems to have solved probem...let you know if it happens again

Why suddenly all these Java error messages since upgrading to Lion?

Similar Messages

Maybe you are looking for