Why system hang when install GeforceFX 5200?

i am using the Asus A7V8X mainboard, Processor is the AlthonXP 1700+. Ram is Kingston 256 DDR 400.
before when i use the geforce 2mx is no problem and good at using in WinXP. But, nearly time i was buy the MSI - 128MB DDR GeforceFX 5200 8X Graphics Card and try install it. When i install the driver come with cd bundled, the system was hang even i try restart and try install again but the problem still exist. then, i was go to the MSI offical website to download the newest driver again and try install again oso cannot. I have already done all i can do is update the vga driver and install VIA 4in1 but the problem still exist here. izzit my mainboard cannot compatible with the GeforceFX graphics card ?
So, i have hope technican here can tell me what the problem is and how can solve this problem...
thx you .

Go to http://www.driverheaven.net and download "Driver Cleaner" Utility. follow the instructions on removing drivers from previous installs.
Do not use the MSI Drivers, go to nVidia's website directly for VGA Drivers.
Make sure you have the drivers downloaded to a directory prior to running driver cleaner so you can immediately install them afterwards.

Similar Messages

[915 Series] System hang when installed CoreCenter

After updated bios to version 1.7 and Core Center 2.0, my system hang after sometime running.
When uninstalled CoreCenter, no problem now.
If installed previous version Corecenter, it still hang.

Many people here will tell you to dump CoreCenter. I don't use CoreCenter either. You'll find many here use Speedfan or MBM5 to monitor their temps and voltages. MBM5 is no longer developed and won't support your mobo. Speedfan is still updated and you also can control fans with this utility. Are soft OC'g with CC? Software OC'g is not recommended, but if you do soft OC, Clockgen is better program for doing so. I wouldn't. OC'g using the bios is considered the better method.
Also, it's a good idea to read the stickies especially the one about posting. As stated in the post I linked to, please include information about your system. See that post and my signature as an example.

My iMac hangs when installing Yosemite.

My iMac hangs when "installing on HD about 22 mins remaining" I did not check to see if this iMac can support Yosemite. What do I do now?

You can try using the full offline Reader installer from
http://get.adobe.com/reader/enterprise/

Tecra S1 Hangs when installing XP

Hi,
I have a weird problem. My Tecra S1 'hangs' when installing a 'normal' Windows XP Pro (instead of using the 'image DVD). The installation works fine up till the last 9 minutes...then it 'hangs', and the laptop stops working. Only possible solution is then to take out the battery & cut the power. Had a (1 time) similar problem of 'hanging' when using the image DVD
Somebody who had this before ???
Thanks a lot for all your hints & tips...

Hej guys,
Thanks a lot for the suggestions, and indeed, I also tried other CD's of XP pro...all with the same result. At the last 9 seconds it hangs & the only thing I can do is take out the battery. Last thing I tried was installing a Win2000 pro & that works fine. Then I tried to upgrade that version, but again...it stopped at the last 9 seconds.... :-((, so perhaps indeed I have to look in the direction of the memory problem ???

System hangs when copying large quantity of files from external HD

A little background:
I was having some problems with the original OS (10.4.1), including periodic freezes. I bought the Mac Box Set '09 and installed Snow Leopard (10.6.5), but ran into some problems and in the process had to reformat my internal hard drive. I backed up all of my photos (~16GB), Documents (~1.5GB) and Music (~50GB) on a WD external hard drive (My Passport 750GB).
*The problem*: After the 10.6.5 install, the computer works great (no random freezing when I click around in Finder), but I am having trouble copying files back to the internal HD from the external. I can copy up to about 1GB at a time without any problems, but any time I try to copy more than that, the system hangs (first the spinning disk cursor, then it totally freezes) and I have to do a hard reset. I have tried copying a number of different folders (pictures and music), and the same holds true: small folders with a few files copy without a hitch, but any time I try to copy a lot of files at once: freeze city. This problem occurs whether I am using Finder to copy the files or iPhoto/iTunes to import them.
I have verified both disks using the Disk Utility AND restructured/verified them using DiskWarrior. I also had no problem copying all of my files from My Passport to a second external HD using this MacBook, so I assume the Passport is fine. Is this a physical problem with my internal HD? If so, why can't DiskWarrior or DiskUtility catch it? I just noticed that there is an internal HD recall for this model of macbook, although I have never gotten the question mark on startup that would qualify me for a replacement HD from Apple. Maybe it's a problem with Snow Leopard... I would love to know if anyone has had this problem before or has some advice.
Thanks,
Sam

External USB/FW drives 'falling off' or drives spinning down (going to sleep) and I would assume since you have been running 10.4 that the Passport might be older model, perhaps not the latest firmware, maybe not compatible with Macs and with Snow Leopard.
Obviously you want FW800 but for some, USB worked where FW fails.
Hard Reset: do you have another hard drive to boot from to run Disk Warrior? is that updated to 4.2 or later? you never want to run DW from CD. Else, boot from OS X 10.6.5; or Single User and run FSCK. HFS+ doesn't take kindly to hard restarts even though a Safe Boot helps a little, that isn't as good as FSCK or one of the other options.
Disk Warrior Rebuild is more thorough, but if you hold OPTION while clicking on REBUILD it brings up more choices. And you want to scan the full hard drive.
Going back to Aug/Sept 2009, there were a lot of threads about external hard drive issues. Wish I could point to a good one.

System hanging when it runs out of memory

Hello,
my system has a finite amount of RAM and swap (it doesn't matter, to my purpose, if it's 16GB or 128MB, I'm not interested in increasing it anyway).
Sometimes my apps completely use all the available memory. I would expect that in these cases the kernel kills some apps to keep working correctly. The OOM Killer exists just for this, doesn't it?
What happens, instead, is that the system hangs. Even the mouse stops working. Sometimes it manages to get back to life in a few seconds/minutes, other times hours pass by and nothing changes.
I don't want to add more memory, I just want that the kernel kills some application when it's running out of memory.
Why isn't this happening?
Right now I'm writing a bash script that will kill the most memory-hungry process when available memory gets below 10%, because I'm sick of freezing my machine.
But why do I have to do this? Why do I need an user space tool polling memory usage and sentencing applications according to a cheap policy? What the hell is wrong with my OOM Killer, why isn't it doing is job?!

Alright, you won, now quit pointing out my ignorance
Your awkish oom killer is a lot cooler than mine, switching to it, thanks!
I did some testing (initially just to test the oom killing script) and found out that if a program tries to allocate all the memory it can, it gets eventually killed by linux's oom killer. If instead it stops allocating new memory when there are less than 4MB of free memory (or similar values) the OOM won't do anything, and the system will get stuck, like if a forkbomb was running.
That's it, this program with MINSIZE=1 will be killed, while with MINSIZE=4MB will force me to hard reboot:
#include <string.h>
#include <stdlib.h>
#define MINSIZE (1024*1024*4) // 4MB
int main( )
int block = 1024*1024*1024; // 1GB
void *p;
while( 1 ) {
p = malloc( block );
if( p ) {
memset( p, 85, block );
else if( block > MINSIZE ) {
block /= 2;
return 0;
Guess I'd need to go deeper to understand why Linux' oom killer works like that, but I won't (assuming the oom killing script will behave).

System crashes when installing games via DVD Writer

When installing multi-disk games / programs pc freezes after putting in second disk - I have tried various other optical drives (IBM 8x CDROM - Pioneer 107 and of course NEC3500) but I have no joy - system just hangs and requires a power off/on to restart.
Tried SATA hard drive but still same problem - tried different cpu 2.8 Northwood - but still no joy.
It does not crash all the time and the games that are on it work fine for any length of time - I have PC alert installed and CPU and system temperature dont go above 51 C
I have installed the games on another pc and they work fine so its not the disks.
please help

Hmm, I hope you fixed your problem regarding installation..and maybe the freezing now is a totally seperate problem? Honestly, at this point...I would reformat everything, even update the BIOS if you haven't done so already. This time though, I wouldn't install anything except the bare essentials (WinXP w/o SP2...vid and sound drivers....no MSI extras) Then install a game or two and test out your crashing then.
I know it's a pain to reformat...but when things get rough, you reformat!
Good luck!
Truong

SAP system hang when start the addon.

Dear Expert,
I just upgrade one of the SAP B1 server from 2007A to SAP B1 8.8 PL15, everything going smooth both server and clients.
Except one client (new laptop with Win 7 Pro x86), this laptop fail to start the addon.
Others clients with same specs Win 7 Pro have no problem to start addon.
Addon started manually.
After click start button for that addon, the system hang. If without the addon system working fine.
If anyone have ideas to check much appreciate and thanks in advance.
Regards,
Mat

Hi Bala,
I did try your steps, but no luck. System still hang when start the addon.
But, I can start SAP addon , example i try Screen Painter, and can start successfully. Only our addon cannot start.
I'm not suspect our addon because others client working smooth, even the server also working fine.
I did re-install DIAPI, even re-install SAP client a few time, but still fail to start addon (delete SAP client folder before install).
Any one face this problem?
Regards,
mat
Edited by: Mat Mat on Apr 21, 2011 10:43 AM

System hanging when i try to display or change or create a function module?

Hi Experts,
My system is hanging when i try to display or change or create a FM using SE37 transaction. I am able to execute SE37 transaction but when i give a FM name which is already existing, the system is getting hanged up. If i give a FM which is not present in the system and try to display it, it gives an error "FM does not exists". I have unistalled the SAP logon and reinstalled it again and restarted my system but still this problem is encountered.
Can any one please help me in this issue??
Thanks a lot in Advance!
Regards,
Lakshman.

Hi Prasad,
Go to se38 transaction and look at UTILITIES-> Settings-> ABAP editor-> Change front-end editor to old(if it is new) and check once. Hope this solves your problem becuase this is what i have done for my problem and let me know whether the problem has been solved.
Regards,
Lakshman.
Edited by: lakshman reddy G on Mar 5, 2009 5:54 PM

NetBeans and j2sdk package hangs when installing

When installing the netbeans 3.6 and j2sdk package the installer get to 48 % and hangs. I let is sit all night and it was still the same the next morning. I am running on XP professional. Any ideas on how to get it to install.
Thanks
Randy

I was having a similar problem
I originally installed the combined package netbeans 5.5 with JDK 1.5.0.9 with no problems.
Unfortunately, I had to uninstall Netbeans, because the Nokia Carbide_j_1_5 integrated plug-in broke it. However, after uninstalling just Netbeans, I was unable to reinstall it !
The installer would report that the JDK was already installed and that it would just install Netbeans 5.5. At that point I clicked "next" to continue, but the installer just hung.
After many attempts, I finally found this thread, and decided to try downloading the installer for just Netbeans (netbeans-5_5-windows.exe)
Bingo! It installed fine. So now I can go home. What a way to spend a Friday night!

Hangs when installing comUS.msb

Hi, i have a copy of Oracle8i, personal edition version 8.1.5 - each time i try to install it, it hangs when trying to install file called "comUS.msb" which is 76% of way through installation.
Does anyone know of a work around to this? I tried cancelling the installation of that component and that only caused the installation to hang even further.
Hope someone can help!
Kind regards
Nick Hoare

This forum is meant for discussions about OTN content/site and services.
Questions about Oracle products and technologies will NOT be answered in this forum. Please post your product or technology related questions in the appropriate product or technology forums, which are monitored by Oracle product managers.
Product forums:
http://forums.oracle.com/forums/index.jsp?cat=9
Technology forums:
http://forums.oracle.com/forums/index.jsp?cat=10
As a general guideline, please first search the forum to see if your question is already answered. You will find answers for the most frequently asked questions by simply searching the forum. This will help you to find the answer right away and will save time for all of us.

[SOLVED] System hangs when maximizing Terminal (new kernel 2.6.38)

I am using terminal [ 0.4.7-1 (xfce4)] and when i maximize the window, system hangs for about 4 sec. The output of dmesg for that issue is:
NVRM: Xid (0000:01:00): 13, 0000 e0019700 00004097 00001808 00000000 00000010
NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context
I use the nvidia 270.41.03-1 drivers. Also, that is not happening with other terminals like xterm.
Last edited by nasosnik (2011-08-21 20:29:58)

My XFCE4 system doesn't hang.. but I have an NVIDIA card too, and when I resize TERMINAL it does this:
First, the picture of the terminal before resizing.
Next, this picture, which shows what the screen does after resizing Terminal:
Last edited by Kilzool (2011-06-05 22:48:47)

System hang when ovrclocking

hi every body
i have aproblem
each time i overclock my system it hangs when i'm trying to load agame or to use a CPU more than 20%
i overclock with dinamic overclock 7 %
i have thermaltake big water cooling system so its not a heat problem.
and i will be glad if anyone can tell me how to overclock my system manually.
thanks alot ppl.

I think it has to do with your RAMs. Try increasing your RAMs voltage by 0.1v and relaxing their CAS Latencies and see if you'll get better results.

Why PDF hang when attempting to open or saved from bank site?

HI,
I have a user who tried to export word file from a bank into PDF, she encountered page hang as her screen try to open/saved excel. It only happens to this particular pc.
When she attempt to save from ERP, it hangs.
Also to note is that this hanging of PDF is not always, it only hangs when it is my user's first time trying to save/open any document document.
I have tried to uninstall the pdf software, and reinstalled.
I have confirmed that the windows and PDF version is the latest as of this posting,
Please advise. Thank you.
Regards Joshua Tay

Hi vanncraw
What Product are you using ?
What is the Exact Error Message ?
is it happening with all PDF Files ?

Root.sh hangs when installing instance 10g clusterware (10.2.0.1)

Hi,
root.sh scripts is hanging when installs 10g clusterware(10.2.0.1).
$./orainstRoot.sh
Changing permissions of /u01/app/oracle/oraInventory to 770.
Changing groupname of /u01/app/oracle/oraInventory to oinstall.
The execution of the script is complete
$./root.sh
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Hangs
Thanks,

There is a note available in Metalink.. 416100.1 Have a look at it..
This is symptom where there is a discrepency in the hostnames in CRS installation.

Why system hang when install GeforceFX 5200?

Similar Messages

Maybe you are looking for