Why system restart?.
Guys,
We've a VB application which connects to the Oracle database using Instant client ODBC.
The creation of TNSNAMES.ora,SQLNET.ora and the setting of environental variable PATH,TNS_ADMIN has been done programatically.
But when we create a DSN(programatically)after all the necessary setup in place,it fails with an error:
'ODBC datasource not found,nodefault driver specified'.(Only for the first time,it fails)
But when I do a system restart,DSN creation works fine.
Why would the environmental variables setup take effect only after system restart?
Why wouldn't the DSN creation work without system restart?
Can someone help me with a solution for DSN creation to work fine without sytem restart?
Thanks,
Bhagat
Tried to create anew account, a new administrator account, to no avail.
Found the answer using VMWare Fusion Program. When leaving the vitual machine one, it completely prevents the machine from restarting.
Other than that, I figure I would just have to reformat and reinstall the OS.
Thanks!
Similar Messages
-
Why this 6509 module reset caused system restart?
I had a 6509 switch recycled power to its 6748-GE-TX module. I like to understand why this module reset caused the system to restart, and what this "system restart" means. Please see the syslog messages (I didn't include all messages).
Thanks
Gary
Mar 16 09:52:49.452 EST: %OIR-SP-3-PWRCYCLE: Card in module 9, is being power-cycled off (Module experiencing Port asic error)
Mar 16 09:52:49.720 EST: %C6KPWR-SP-4-DISABLED: power to module in slot 9 set off (Module experiencing Port asic error) 00:00:04: %SYS-CFC9-5-RESTART: System restarted --
Mar 16 09:53:57.497 EST: %OIR-SP-6-INSCARD: Card inserted in slot 9, interfaces are now onlineHi Gary,
The message is a bit misleading. The "system restarted" message is coming from the CFC daughter card on the module
"%SYS-CFC9-5-RESTART: System restarted -"
So the entire switch did not restart, but just the module and daughter card. Now, I'm saying that based on the provided messages. You should check the system uptime in the "show ver" and/or the reset logs stored in the NVRAM log "show log" as well.
But, as I said, if the only indication of "System restarted" was in the above syslog, then that's only referring to the CFC.
HTH,
Bobby -
my mcp restarting itself and showing me pop up , ur system restarted because of a prob, I'm using mbp 13inch 2012 ,2.5 GHz Intel Core i5, any answer please ?
Your description suggests that your MBP had a kernel panic:
http://support.apple.com/kb/ts3742
If so, follow these directions and post the report for inspection:
support.apple.com/kb/ht2546http://
Ciao. -
Insufficient permissions for system restart
Hi All,
We are receiving the following error when attempting to restart a domain controller, after MS updates have been installed, from within SCCM 2012 R2 CU1 software center.
"Insufficient permissions for System Restart"
"Restarting this computer is only allowed for users with administrative permissions, or your IT department does not allow you to restart this computer"
The user on the domain controller can restart the server using a normal windows shutdown procedure outside of the software center, as they are in the Active Directory domain "backup operators" group.
The domain controller is running server 2008 R2 SP1. The SCCM 2012 infrastructure is running R2 CU1 with the latest client installed on the domain controller.
Any help would be very much appreciated.
Regards PowerShell90Hi Garth,
Thanks for the quick reply
Domain administrators can install the updates and reboot within software centre without a problem. No restrictions have been put in place for the domain controllers or backup operators. We allow the Microsoft default option to allow members of
the domain "Backup Operators" to shut down domain controllers. They are able to do this on the DC, but they get an error when trying to complete this through SCCM 2012 R2 CU1 software centre. I can't understand why?
Regards
Regards PowerShell90 -
RFC connections do not work after system restart
Hi PI experts!
We're facing a problem with our PI 7.0 system. After each restart of the system, all RFC sender communication channels do not work. When testing the connection in the sending SAP system, the connection test fails. Currently we workaround the issue by manually restarting the RFC adapter after system restart.
Does anybody has any idea how th fix that problem? <<text removed>>
Cheers,
Matthias
Edited by: Matt on Apr 29, 2009 3:26 PM - don't offer pointsMathias,
Your problem is due to the fact that SAP is not up and running when XI restarts.
there is a parameter in RFC adapter that you can modify in order to fix that
Please, see the following link and let me know: /people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue
best regards,
David -
Software Updates and System Restarts
Hi Folks,
I've read many articles posted here on system restarts, but I can't find one that addresses my issue. So here it is...
Regarding the deployment of Software Update groups for Microsoft Updates. I have created the exact same deployment for each deployment, with the following relevant configuration;
Deployment Settings
-Type of Deployment: Required
Scheduling
-Software Available Time: ASAP
-Installation Deadline: Friday morning at 3AM
User Experience
-User Notifications: Display in Software Center and Show all notifications
-Deadline Behavior: Software updates installation [checked], System Restart [unchecked]
-Device Restart behavior (supress system restarts): Servers [checked]; Workstations [unchecked]
My goal is to advertise the updates for several days initially, allowing my clients to install updates on their workstations at their leisure, but then come Friday at 3am, they will be forced to install. However some clients shut their workstations
down overnight, and some may take Friday off, so Monday morning I would like for the updates to install when they turn their workstations back on at say 9am, but postpone the restart until their maintenance window.
What am I doing wrong?
Many Thanks,
Bill HearnSystem restart checkbox is used to control what happens outside of MW.
If you have no MW and did not select to restart outside of MW then systems will reboot after installation completes (unless user overrides it and does it sooner). Keep in mind that the 90 minute and 15 minute restart countdowns will be displayed if user is
logged in (unless you have changed the times) if user did not interact with any notifications to select other options like install and reboot ahead of time.
If you have MW and did not select to restart outside of MW, then PC will not reboot until MW starts (unless user overrides it, of course).
If you select to reboot outside of MW checkbox then PC will reboot after installation ends, no matter if MW is set or not. -
Satellite A60-102 - Blue screen error appears on screen and system restart
Sometime Blue screen error showing on screen and system restart
how can solve this problemHi
What BSOD code you get exactly?
Which OS you are using?
Maybe its a driver problem. Have you checked the device manager for yellow exclamation marks?
Can you boot in safe mode? -
Hi. I'm in need of great help as I do not understand how this could have happened.
I had my firefox on, with multiple tabs and windows as I was doing intense research for a paper. My screen then freezes up, but my mouse could still work. Having experienced this before, I immediately pressed and hold the power button till my macbook pro shuts down.
After which, I switched it back on. To my horror, everything was resetted to factory settings: my desktop background was replaced, the fonts on the clock display were different. But this wasn't so bad.
After which, I realised that my dock went missing, together with the icons. I clicked the apple drop down menu, and my screen hanged momentarily, and in that moment everything on the screen disappeared (including the upper dock) for a few seconds and appear again. Meaning, i cant click the drop down.
Similar thing happened with my spotlight. Using the hot keys command-space, the dropdown appeared on the top right, but when i started to type, the screen disappeared and appeared again like before.
Finally i checked my applications folder, and it seems like all the applications are missing, like they have never been installed before! Their folders are there, but the icons and apllications themselves aren't. No applications/software installed- not even the utilities and system preference softwares that came with the macbook.
Luckily though, all my documents are safe. I just cant open them because my iworks and adobe are all missing and "not installed". I cant even access the internet. I'm doing this via my iPhone.
So basically i cant do anything because my apple drop down menu is unreachable, so is my spotlight, and my apps/softwares like system preference, utility are all missing. Is there a way i can troubleshoot this? Or make my macbook work again? I have already restarted and shutdown and switch it back on again near five times.
I know my explanation is long, but do help me if you can. I'm really at a lost right now...Hi
Thanks for the help. I did what you advised, but it still did not work.
The repair disk was successful. Unfortunately when the system restarted to boot my startup disk, I faced the exact same problems as I did previously. I also did a hardware test, but no problems were found.
Even tried powering off and on the macbook pro again but the same problems remained...
I tried to back-up my files too but they refuse to copy/move into my hard disk drive folder.
Nothing works.
Do you have other ideas? Or suggestions?
Thanks so far! -
Windows XP crashes and system restarts when I try to open Itunes 6
I tried to ask the people at Apple support what was going on. But they didn't seem to know. My system restarts when I try to open Itunes. It does it with the factory software I recieved with my 5g Ipod Video. It also does it with any updated version I install. If I reinstall Itunes the program works fine for about a day. Then it crashes my system again. Please help. I don't want to reinstall Itunes everyday in order to use it.
compaq Windows XPNow I have the blue screen and this is the error message.
* stop: 0x00000050 (0XBB9EA29E,0X00000000,0X8057DA81,0X00000002)
hmmmm. okay ... do you have an early version of Roxio CD Creator 5 installed on that PC?
i've seen this show up a few times. one of the early versions of Easy CD Creator 5 actually isn't compatible with XP:
Easy CD Creator 5.0 Does Not Function In Windows XP
... but sometimes the first time people know about this is when the PC starts throwing a 0x50 at them them they try to launch itunes or (of all things) plug in an ipod ...
if that doesn't seem to be a factor, another thing to try is vigorous spyware and virus scans (with fresh definitions). both haxdoor and sdbot can make PCs suddenly start throwing 0x50s after new software installs.
but if those turn up blank, let's try getting a minidump on the crash to the Discussions Hosts so they can throw it over the fence to the Apple Engineers for a look. (thanks to toonz for teaching me this one.)
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
And then send it to a Discussions Host. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b -
Question
After I close Firefox and then return to open it my computer says that it is still running and needs to be closed or the system restarted. How do I resolve this? editSee this - [https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_firefox-hangs-when-you-quit-it Firefox hangs when you close it]
-
Behavior of integration process after system restart
Hello,
we have an integration process used for correlation of two asychronous messages.
So if the first message is sent out, the second message that should be correlated will arrive approx. 5 hours later.
What would happen if the system is restarted after the first message is sent out, but before the second message comes in? Are all active process instances deleted during a system restart or is there some kind of persistence mechanism?
Thank you for your advice.Hi Florian,
please have a look at oss notes from my blog
/people/michal.krawczyk2/blog/2006/06/27/xi-who-said-he-cannot-be-stopped-bpm-jim--sp17
Regards,
Michal Krawczyk -
System restart error in Module pool
Hi Experts,
I have created one modulepool Prgram with Table control it is working fine for Display, whenever i want to try to Save i am getting system error System Restarted;Session terminated. i am attatching the screen shot of that..Hi Vishwanath,
You can use the following coding to check with your coding part.This may help you to clear your problem.
module USER_COMMAND_0100 input.
case sy-ucomm.
when 'SAVE'.
modify ztable from ztable.
if sy-subrc = 0.
message 'record updated succesfully' type 'S'.
endif.
Endcase.
endmodule. -
After a system restart i cannot connect to SAP with SAPGUI.
After a system restart i cannot connect to SAP with SAPGUI.
See attached log "dev_disp" and "dev_w0"
At the end of this message you can see the comparison between the
defective system and another working system
I notice the absence of the "IGS400" process
Could you please help me ?
Best regards to everybody.
"dev_disp" log file tell me : ************************
trc file: "dev_disp", trc level: 1, release: "640"
Thu Jun 21 13:21:24 2007
kernel runs with dp version 132(ext=102) (@(#) DPLIB-INT-VERSION-132)
length of sys_adm_ext is 312 bytes
sysno 00
sid SVI
systemid 324 (IBM iSeries with OS400)
relno 6400
patchlevel 0
patchno 147
intno 20020600
make: single threaded, ASCII, 64 bit
pid 380
Thu Jun 21 13:21:27 2007
***LOG Q00=> DpSapEnvInit, DPStart (00 380) [dpxxdisp.c 1100]
shared lib "dw_xml.so" version 147 successfully loaded
shared lib "dw_xtc.so" version 147 successfully loaded
shared lib "dw_stl.so" version 147 successfully loaded
shared lib "dw_gui.so" version 147 successfully loaded
shared lib "dw_mdm.so" version 147 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >FRASTEST_SVI_00 <
DpShMCreate: sizeof(wp_adm) 10712 (824)
DpShMCreate: sizeof(tm_adm) 3021432 (15032)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 216000 (432)
DpShMCreate: sizeof(vmc_adm) 0 (448)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
Thu Jun 21 13:21:28 2007
DpShMCreate: SHM_DP_ADM_KEY (addr: 700000080000000, size: 3337656)
DpShMCreate: allocated sys_adm at 700000080000000
DpShMCreate: allocated wp_adm at 700000080001830
DpShMCreate: allocated tm_adm_list at 700000080004208
DpShMCreate: allocated tm_adm at 700000080004230
DpShMCreate: allocated wp_ca_adm at 7000000802e5ca8
DpShMCreate: allocated appc_ca_adm at 7000000802ea2f8
DpShMCreate: allocated comm_adm_list at 7000000802eba68
DpShMCreate: allocated comm_adm at 7000000802eba80
DpShMCreate: allocated vmc_adm_list at 700000080320640
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 700000080320668
DpShMCreate: allocated wall_adm at 700000080320670
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Thu Jun 21 13:21:29 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x7000000d0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
Thu Jun 21 13:22:33 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
Thu Jun 21 13:22:35 2007
***LOG Q0K=> DpMsAttach, mscon ( FRASTEST) [dpxxdisp.c 10036]
Thu Jun 21 13:22:36 2007
DpStartStopMsg: send start message (myname is >FRASTEST_SVI_00 <)
DpStartStopMsg: start msg sent
Thu Jun 21 13:22:47 2007
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Jun 21 13:22:49 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 147
Release check o.K.
Thu Jun 21 13:39:13 2007
DpSigInt: caught signal 2
DpHalt: shutdown server >FRASTEST_SVI_00 < (normal)
Thu Jun 21 13:39:14 2007
***LOG Q0I=> NiPWrite: writev (32: Broken pipe) [niuxi.c 1140]
ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) [msxxi.c 2455]
ERROR => MsIModState: MsINiWrite (rc=NIECONN_BROKEN) [msxxi.c 3695]
MBUF state OFF
MBUF component DOWN
DpModState: change server state from STARTING to SHUTDOWN
Thu Jun 21 13:39:15 2007
Stop work processes...
Thu Jun 21 13:40:18 2007
ERROR => DpWpKill(411, SIGUSR2): kill failed [dpxxtool.c 2462]
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of work processes
Thu Jun 21 13:40:19 2007
waiting for termination of work processes
Thu Jun 21 13:40:20 2007
waiting for termination of work processes
Thu Jun 21 13:40:21 2007
waiting for termination of work processes
"dev_w0" log file tell me : ************************
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 404
M
M
M Thu Jun 21 13:22:00 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 404) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jun 21 13:22:11 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C
C Thu Jun 21 13:22:13 2007
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 404
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 025901
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 025901
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Thu Jun 21 13:22:17 2007
C SQL monitor started for job
B
B Thu Jun 21 13:22:18 2007
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070621 132200 FRASTEST
M
M Thu Jun 21 13:22:37 2007
M db_connect o.k.
M
M Thu Jun 21 13:22:38 2007
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, M
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009ED34587C2E94220
=> Stack address = 0xffffffffffff3f0
=> Stack low = 0xfffffffffffdb30
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
Unknown at 0x3618
sleepms() at 0x1000f9324
SpinLockSemRq1() at 0x1000f926c
SemRq() at 0x1000fcf6c
ThIPCInit() at 0x1000ac1a0
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
=> CPU Registers:
msr = 0x800000000000f032 iar = 0x0000000000003618
ctr = 0x0000000000003610 lr = 0x09000000000a2890
xer = 0x0000000008000000 cr = 0x000000002a404445
r00 = 0x0000000000000000 r01 = 0x0ffffffffffff3f0
r02 = 0x00000000000000a4 r03 = 0xffffffffffffffff
r04 = 0x0000000000000000 r05 = 0x0000000000000000
r06 = 0x0000000000000000 r07 = 0x0ffffffffffff520
r08 = 0x0000000000000001 r09 = 0x0000000010108003
r10 = 0xb00010000c90e000 r11 = 0xb00010000c90ef30
r12 = 0x0900000000001eb0 r13 = 0x0000000182784a50
r14 = 0x0000000000000002 r15 = 0x00000001810e6c48
r16 = 0x0ffffffffffffb28 r17 = 0x000000018001bf20
r18 = 0x0000000000000003 r19 = 0x0000000000000004
r20 = 0x0000000180c6de34 r21 = 0x0000000180c6de28
r22 = 0x000000018004ce60 r23 = 0x0000000180c6e244
r24 = 0x0000000000000064 r25 = 0x0000000000000158
r26 = 0x0000000000000158 r27 = 0x0000000000000000
r28 = 0x0000000000000000 r29 = 0x0fffffffffffffe0
r30 = 0x09001000a005ec48 r31 = 0x0000000000000000
Thu Jun 21 13:40:23 2007
Library |(SRV)PGM |Module |Function/Statement No.
Thu Jun 21 13:40:24 2007
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
ACTIVE JOBS OF DEFECTIVE SYSTEM
Opz Sottosis/Lav corrente Tipo % CPU Funzione Stato
R3_00 QSYS SBS 0,0 DEQW
DISP_WORK SVI00 BCI 5,3 PGM-disp+work CNDW
GWRD SVI00 BCI 10,9 PGM-gwrd RUN
ICMAN SVI00 BCI 1,8 PGM-icman RUN
MSG_SERVER SVI00 BCI 0,0 PGM-MSG_SERVER SELW
RSLGCOLL SVI00 BCI 0,0 PGM-rslgcoll SELW
RSLGSEND SVI00 BCI 0,0 PGM-rslgsend SELW
SAPOSCOL SVI00 BCI 1,0 PGM-SAPOSCOL RUN
SAPSTART SVI00 BCH 0,0 PGM-sapstart EVTW
WATCHDOG SVI00 BCI 0,4 PGM-disp+work SELW
WP00 SVI00 BCI 1,0 PGM-disp+work RUN
WP01 SVI00 BCI 1,0 PGM-disp+work RUN
WP02 SVI00 BCI 1,0 PGM-disp+work RUN
WP03 SVI00 BCI 1,1 PGM-disp+work RUN
WP04 SVI00 BCI 0,9 PGM-disp+work RUN
WP05 SVI00 BCI 0,9 PGM-disp+work RUN
WP06 SVI00 BCI 0,8 PGM-disp+work RUN
WP07 SVI00 BCI 0,6 PGM-disp+work RUN
WP08 SVI00 BCI 0,0 RUN
ACTIVE JOBS OF WORKING SYSTEM
R3_03 QSYS SBS 0,0 DEQW
DISP_WORK TST03 BCI 0,0 PGM-disp+work SELW
GWRD TST03 BCI 0,0 PGM-gwrd SELW
ICMAN TST03 BCI 0,0 PGM-icman SELW
IGS400 TST03 BCI 0,0 PGM-igswd_mt THDW
IGS400 TST03 BCI 0,0 PGM-igsmux_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
MSG_SERVER TST03 BCI 0,0 PGM-MSG_SERVER SELW
RSLGSEND TST03 BCI 0,0 PGM-rslgsend THDW
SAPSTART TST03 BCH 0,0 PGM-sapstart EVTW
WATCHDOG TST03 BCI 0,0 PGM-disp+work SELW
WP00 TST03 BCI 0,0 PGM-disp+work SEMW
WP01 TST03 BCI 0,0 PGM-disp+work SEMW
WP02 TST03 BCI 2,5 PGM-disp+work RUN
WP03 TST03 BCI 0,0 PGM-disp+work SEMW
WP04 TST03 BCI 0,0 PGM-disp+work SEMW
WP05 TST03 BCI 0,0 PGM-disp+work SEMW
WP06 TST03 BCI 0,0 PGM-disp+work SEMW
WP07 TST03 BCI 0,0 PGM-disp+work SEMW
WP08 TST03 BCI 0,0 PGM-disp+work SEMW
WP09 TST03 BCI 0,0 PGM-disp+work SEMW
WP10 TST03 BCI 0,0 PGM-disp+work SEMW
WP11 TST03 BCI 0,0 PGM-disp+work SEMW
WP12 TST03 BCI 0,0 PGM-disp+work SEMWFollowing your suggestions i got this error message in the log file "dev_w0"
This process creted also a very big "core" file
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
Here is the complete log:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 317
M
M
M Wed Aug 1 17:53:03 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 317) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Wed Aug 1 17:53:05 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 317
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 028178
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 028178
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Wed Aug 1 17:53:09 2007
C SQL monitor started for job
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070801 175303 FRASTEST
M
M Wed Aug 1 17:53:12 2007
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 1 17:53:13 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 700000200000000, size: 4400128)
M
M Wed Aug 1 17:53:14 2007
M SHM_ROLL_AREA (addr: 700000210000000, size: 268435456)
M
M Wed Aug 1 17:53:15 2007
M SHM_PAGING_AREA (addr: 700000220000000, size: 67108864)
M SHM_ROLL_ADM (addr: 700000230000000, size: 2672386)
M SHM_PAGING_ADM (addr: 700000240000000, size: 164896)
M
M Wed Aug 1 17:53:16 2007
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 700000250000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 700000260000000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B
B Wed Aug 1 17:53:20 2007
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B
B Wed Aug 1 17:53:25 2007
B dbtbxbuf: Buffer TABL (addr: 7000002d0000100, size: 64000000, end: 7000002d3d09100)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 31427136
B ***LOG BB0=> buffer TABL started with length 64000000 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B
B Wed Aug 1 17:53:26 2007
B dbtbxbuf: Buffer TABLP (addr: 7000002e0000100, size: 16776192, end: 7000002e0fffd00)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 8322944
B ***LOG BB0=> buffer TABLP started with length 16776192 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: Opening /usr/sap/SVI/DVEBMGS00/data/tbxnew failed (No such file or directory).
B dbtbxbuf: Renaming /usr/sap/SVI/DVEBMGS00/data/tbxnew to /usr/sap/SVI/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: 110 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 8009 * 40 = 320360
B 4: 4000 * 160 = 640000
B 5: 8009 * 8 = 64072
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 319664 * 128 = 40916992
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 700000300000108, size: 41943040, end: 700000302800108)
B ***LOG BB0=> buffer EIBUF started with length 40960k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28755 * 128 = 3680640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 700000310000108, size: 4194304, end: 700000310400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 16411 * 40 = 656440
B 4: 8191 * 160 = 1310560
B 5: 16411 * 8 = 131288
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 57325 * 256 = 14675200
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 700000320000108, size: 16776192, end: 700000320fffd08)
B ***LOG BB0=> buffer CUA started with length 16383k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 28754 * 128 = 3680512
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B
B Wed Aug 1 17:53:27 2007
B dbexpbuf: Buffer OTR (addr: 700000330000108, size: 4194304, end: 700000330400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
C
C Wed Aug 1 17:53:29 2007
C *** ERROR => Error 304 in function db_fetch
[dbsldb4.cpp 9041]
C === DBSL Begin of SQL request after execution ===
C === DBSL SQLP0400 ===
C Function 5
C Package DDNTFIH Library R3SVIA2062
C Main_Pgm Main_Lib
C Statement_Name "Wx3AAADpDB" Cursor_Name "CADDNTF16461"
C Open_Options x80 Clause_For_Describe N
C Commitment_Control C
C Date_Format USA Date_Separator /
C Time_Format USA Time_Separator :
C Naming_Option SYS Decimal_Point .
C Blocking_Factor 1 Scrollable_Option 0
C Position_Option 0 Relative_Record 0
C Rows_To_Insert 0 Direct_Map N
C Reuse_DA N Name_Check Y
C Use_Ptrs 0 With_Hold N
C Close_File_Name Close_Library_Name *THRESHOLD
C Reopen 0 Use_Perf 1
C Query_Compl. (Reval) ! Statement_Text_CCSID 819
C Sort_Sequence_Table *JOB Sort_Sequence_Library *LIBL
C Language_ID *JOB Allow_Copy_Data S
C Allow_Blocking L
C === DBSL SQLDA ===
C sqldaid: SQLDA 2 , sqldabc: 816, sqln: 10, sqld: 4
C === TRACE VAR 0 ===
C sqlvar: 0, sqtype 469, sqllen 30, sqlname.data 13488
C sqlind: 0
C sqlname (hex):
C 0008000034B00000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 005400430041004C 0053002000200020 0020002000200020 0020002000200020
C 0020002000200020 0020002000200020 0020002000200020 00200020
C === TRACE VAR 1 ===
C sqlvar: 1, sqtype 501, sqllen 2, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000
C === TRACE VAR 2 ===
C sqlvar: 2, sqtype 497, sqllen 4, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 00000031
C === TRACE VAR 3 ===
C sqlvar: 3, sqtype 405, sqllonglen 32700
C sqldatalen NULL
C sqlind: 0
C sqlname (hex):
C 00080000FFFF0000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000028742000007 4100000000010000 0000280001000000 0100010000004944
C 0000000000000000 0000000000000000 0000000000000000 00000000004B4142
C === DBSL errc ===
C errc: OK
C === DBSL sqlca ===
C sqlcode: 304
C sqlerrml: 68, sqlerrmc:
C 00035CD540404040 4040404040404040 4040404040404040 4040404040404040
C 4040404040404040 4040404040404040 4040404040404040 4040404040404040
C 40400006
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
==> calling sap_dext to abort transaction
[dbeh.c 93]
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009E570787C2ED4260
=> Stack address = 0xfffffffffffd6f0
=> Stack low = 0xfffffffffffd6f0
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
AixStack() at 0x10008d040
CTrcStack2() at 0x10008d138
ThControl() at 0x1006551a4
dyThControl() at 0x1003ab070
dextIntern() at 0x1003aa06c
sap_dext() at 0x1003aff24
dbeh_exit() at 0x100416924
db_ntab() at 0x10039d48c
read_ntab() at 0x101512474
db_cbufload() at 0x10150f40c
reset_handling() at 0x101512f00
init_shm_and_load_cals() at 0x10151394c
db_cbufinst() at 0x101514c48
db_calinit() at 0x1005ae8bc
db_init() at 0x1001c7ae0
ThCallHooks() at 0x1000c3654
ThIPCInit() at 0x1000ac574
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
Wed Aug 1 17:53:29 2007
Library |(SRV)PGM |Module |Function/Statement No.
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
M ***LOG R1B=> ThControl, sap_dext-call (00 ) [thxxdynp.c 355]
M in_ThErrHandle: 1
M *** ERROR => ThControl: illegal sap_dext call !!! (step 1, th_errno 5, action 1, level 1) [thxxhead.c 9564]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M Entering ThSetStatError
M Entering ThReadDetachMode
M ThISend: still inside critical section semaphore ? -
Datasources getting deactivated after system restart
Hi,
We are facing a issue while system restart the datasources are getting deactivated.
Can anyone let me know where to check to debug this issue.
Thanks & Regards,
Ankur Deshpande
P.S: Points will be awardedHi Ankur,
We too are facing the same error.
Br,
Praby -
Unable Install Bootcamp 2.0 OS X 10.5 - Error "A system restart is pending"
We are using Bootcamp Beta 1.4 on a Macbook Pro with Windows Vista installed without any problems. We have succesfully upgraded to OS X 10.5 and tried to upgrade the Windows drivers. This fails with the message
"A system restart is pending. Complete the restart and then retry this installation."
Rebooting does not make any difference.
Starting the install process with logging enabled via
msiexec /i Bootcamp.msi /l*v c:\Bootcamp.log
does not give more clues (at least for us). An error code 1603 ("Fatal Installer Error" is generated.I had the same problem with Vista Business 32bit. Fixed it by removing the data in PendingFileRenameOperations registry key:
1. Start -> execute "regedit"
2. Search through keys to find the string "PendingFileRenameOperations"
3. Double click on the registry key and remove everything that is in there
Then run cmd.exe from explorer as administrator (right click -> run as administrator) and manually start the msi from that commandline.
Apple has been on my sh*tlist for quite a while now, and things are getting worse. I had to buy Leopard just to obtain the current bootcamp drivers, after having spent a premium to purchase their hardware. Turns out the trackpad is still not properly supported in Windows.
I'm back to Thinkpads, even if it's Lenovo now. The quality is even better than MacBooks, they run windows natively and I don't have to deal with nonexistent customer support.
Maybe you are looking for
-
Apple remote controler on Book Pro retinal display
I was give an older Apple remote control to use on my MacBook Pro retinal. It is not a bluetooth one I guess ( white, smaller and black on tip). Can it be used? I did not find any setting for it in system preferences.
-
Im having trouble connecting my virtual pc win98 system to my mac so I can use the internet in windows...I tried both options of eitehr shared networking or virtual switch and neither is working....Im not sure what to do! Please help! Thanks
-
Is there a way to watch the playback of a project on my full iMac screen?
-
820 / ACH Payment Advise IDOC generation
Hi All, I want Purchase Order details, for eg Material number , quantity price , in the payment advise send to the vendor through the EDI. Can anyone advise me how do i proceed for this .
-
APs Controlled from Agent instead of WLC?
I have 8 APs directly connected to a stack of 3850 switches operating as the WLC. I have 4 more APs connected to another 3850 stack on a different floor operating as a wireless mobility agent. I have a trunk link directly between the two 3850 stacks.