Why tethering with USB cable doesn't work after IOS6.0 update?

why tethering with USB cable doesn't work after IOS 6.0 update?

Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

Similar Messages

  • Why my adobe flash player doesn't work after installing update?

    Hello,
    I installed the latest update of adobe flash player but i still can't play videos on youtube, facebook, .... It keeps asking me to update to the latest flash player?
    Can someone help me out with this?
    Thx a lot!

    Go step by step and test.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:  > "Enable Plug-ins".
           or
        Internet Plug-ins >  "Allow all other plug-ins
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box beside
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes beside all items.
        Check the box beside "Remove all website data".
        Click "Reset".
    5. Turn off Extensions, if any.
        Safari > Preferences > Extensions
         Now try YouTube.
    Best.

  • AT&T Microcell Doesn't work after iOS6 update

    I can no longer get a reliable connection for my iphone 4 or my wife's iphone 4 to the AT&T Microcell after updating to iOS 6.     I spent over an hour with AT&T tech support with no success.   I have managed to get one of the iphones to see the microcell if I reset network settings (Under General - Reset), but not both.  Really strange.   Anyone have any suggestions?

    Must be something with your Microcell.  Have you powered it down and rebooted it?
    I had 2 iPhones that I upgraded to iOS 6 and the Microcell recognized them immediately.

  • My cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

    my cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

    It's covered under the same warranty as the phone. So long as it's not physically damaged, they should replace it for you.

  • App store doesn't work after iOS6

    App Store doesn't work after ios6. Re-booting doesn't work. Suggestions please.

    I have the same problem with my New iPad. 
    It was fine until this afternoon when I upgraded to ios6.
    I don't have the wifi issues that others have reported but my AppStore doesn't work anymore.
    It's just the AppStore that won't work.
    Though Purchased and Updates looks OK, "Featured," "Charts" and search all return no results - just a big gray screen in the middle.   I've been walked thru a Restore by Support but nothing's worked so far.  I've tried logging off and logging back on.
    From what I can tell, everything else (iTunes, apps, etc) look ok.
    Any other suggestions?

  • My SuperDrive doesn't work after Lion update

    My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
    Thanks

    I too have had the problem since updating to Lion.  My superdrive isn't even recognized.  I have repaid hard disk permissions and also reset PRAM.  Sure wish I had a fix. 

  • Fit the window with mouse doesn't work after new update 10.9.2

    Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

    Doesn't anyone having this issue?

  • Why can't i connect to my wifi after ios6 update

    why can't i connect to my wifi after ios6 update

    It didn't work for me either.
    My Apple store don't know the answer and have suggested that I connect to a computer and do a full reset and install iOS6 again.
    Not too sure how to do that yet.

  • Does anybody has problem with playing youtube in Opera Mini after iOS6 update?

    After iOS6 update I can not play youtube from Opera Mini,- neither link to youtube works and embedded video as well. It works ok with Safari, but I prefer using Opera Mini instead. If there is a embedded youtube video or just a link to m.youtube, Opera mini does nothing:(

    Cool, in OperaMini forum, there is an answer, that issue has been noticed and will be solved someday!
    http://my.opera.com/community/forums/topic.dml?id=1316462&page=2#comment13138752

  • Myi iphone4  microphone not working and the home button not work after IOS6 updat

    Myi iphone4  microphone not working and the home button not work after IOS6 updat

    Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
    Make sure all your data is available on your computer for manual syncing later.
    Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
    And you are using iTunes 10.7?
    I'm just trying to help get you going.

  • Hi my iPad 2 charger the one with the USB port and a USB cable doesn't work anymore I've changed fuses even tried a different cable no luck HELP!!!

    HEEEELLLLLPPPP MEEE I'm going crazy!

    Sounds like you need to restore your Apple TV to factory settings.
    See this Apple document:
    http://support.apple.com/kb/HT4367
    You will need to use the "Micro USB Cable" to restore it to factory settings.
    See the article shown above.
    You must unplug the power cord before connecting the ATV to your computer....

  • 40GB iPod Photo came with FW cable, doesn't work with FW cable

    I have a 40GB iPod photo that I love. I bought another (used) one for my wife, being careful to get the identical model so we could share things such as docks, cables, etc.
    Her iPod works fine with the USB cable, but will only charge with the FW cable -- no computer can see her iPod through FW. I've reset the iPod, updated it with the iPod updater, but nothing. When I connect her iPod to any of my Macs (her 12" iBook, my 12" PowerBook, my G5 iMac) with FW, the iPod appears to be charging, but is not detected by the computer, nor are any of the iPod controls usable. It doesn't go to the "do not disconnect" screen, but simply freezes where it is until the FW cable is disconnected.
    Specifics: both iPod Photos are the 40GB model M9585LL, version 1.2.1. The 2nd one CAME WITH a FW cable, which is why I'm puzzled that it won't work with it. Help?

    Here is some info for the pinout for the iPod.
    http://www.anythingbutipod.com/archives/2006/04/zen-vision-m-video-cable-other-4 pole-35mm-pinouts.php
    You need to find the pinout of the camera cable you have.
    Probably be easier to get get an AV cable with a 3.5mm plug to (whatever fits into your TV) cable.
    Usually, you simply have to swap the Red and the Yellow for it to work properly.

  • USB cable doesn't work

    Now the problem is I can't get my iphone 5 being charged using my USB cable linked to computer or to outlet with adpter. My iphone 5 just arrived in a week and the first one or two days it can work but yesterday I find it can't work now. I have tried my iphone 5 using another iphone 5 usb cable, and it can work.

    All package contents included with the iPhone purchase are under Apple's standard one year warranty. If you purchased the AppleCare Plus extended warranty package if available in your country, the warranty is good for two years.
    Contact AppleCare or make an appointment at an Apple store if there is one nearby to get a replacement cable under warranty.

  • The applicatio​n uninstalle​r ,created with Labwindows CVI, doesn´t work after upgrading to 2010 version

    Hi,
    I have been working with Labwindows CVI 2009 with no problem but after upgrading to 2010 version I have the following problem:
    When i´m going to execute the unistaller, either from Windows Control Panel or directly from the uninst.exe icon, it doesn´t work. The PC thinks a few seconds and does nothing, and it happens with all the applications I build with Labwindows CVi 2010.
    Thanks,
    Asier
    Solved!
    Go to Solution.

    Hello -
    Are you installing these distributions on a non-English operating system?  If so, the first thing to try would be the workaround listed on this known issue. 
    The known issue only lists Italian OSs as the troublesome OS, but it could actually happen on many different non-English OSs. I will update the text accordingly the next time I update the known issues list.
    NickB
    National Instruments

  • Why 3G doesn't work after being updated my iphone 5 to IOS 6.1

    I've a problem with my iphone 5 since updating it´s operating system , I mean IOS 6.1 , so it was last thursday when I did that over the air , before I used perfectly my 3G but just after this update it doesn't work as usuall , I'm really disappointed about that and I hope that apple gonna give us the opportunity to correct that by another update this week , On the other hand I live in Casablanca , Morocco

    Same with mine. Its disaster. And now making my iphone 5 become warm. Pleaseeee apple don't just release anything that not fixed yet. Feel so sad how come apple like this.

Maybe you are looking for