Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

Because Wind is not an officially supported iPhone carrier and Apple warns that using an iPhone on a non-supported carrier's network may mean that some features may not be available or work at all.

Similar Messages

  • Sites that have the option "login with facebook" don't work. They don't log in

    For example. My nikeplus account needs to log in via Facebook. But it doesn't work. I already tried downloading chrome, but that doesn't work either.
    Hope you guys can help me!
    Grtz,
    Eleonora

    I'm having the same issue.  Just hooked up a Mac Mini and running the internet just fine over wifi, but Facetime isn't working.  I'm going to try resetting my router in the morning.

  • Why when I try to login the Itunes Connect with my Apple ID it always says: "Apple ID does not have permission to access iTunes Connect."?

    Why when I try to login the Itunes Connect with my Apple ID it always says: "Apple ID does not have permission to access iTunes Connect."?

    Look on one of your bank statements and be sure to enter the billing address exactly as it shows on the statement. Some folks forget where they actually get the statement. They put their home address in iTunes/Mac App Store and they actually get the statement at their place of employment or vice versa.

  • Why the new version of iTunes don't have photo features?

    Why the new version of iTunes don't have phot features? How can I sync my photo from my pc to Ipad2?

    Every version of iTunes that supports syncing with an iPhone has the ability to sync pictures to the device.
    Resize the iTunes windowso that you can see the entire window.

  • Would like to connect with Wind Carrier

    Has anyone been able to buy a new iPhone 5c and connect with Wind in Canada, please help.

    Not sure if your iPhone is compatible? Start here:
    iPhone 5s
    Purchase Date: After September 20th, 2013
    Model Number: A1533
    iPhone 5c
    Purchase Date: After September 20th, 2013
    Model Number: A1532
    iPhone 5
    Purchase Date: After April 11th, 2013.
    Model Number: A1428
    Serial Number: Must contain the following sequence
    White 16GB - FH1C
    Black 16GB - FH19
    White 32GB - FH1D
    Black 32GB - FH1F
    White 64GB - FH1G
    Black 64GB - FH1H
    The original iPhone, iPhone 3G, iPhone 3Gs, iPhone 4, iPhone 4s are not compatible with the WIND network.

  • How to send two request in the same connection with HttpURLConnection?

    As the title, I want to send two or more requests in the same connection with HttpsURLConnection..I wish all requests are in the same session.
    My code is as following:
    package test1;
    //import javax.net.ssl.*;
    import java.net.*;
    import java.io.*;
    public class httptest {
    public httptest() {
    public void test() {
    HttpURLConnection uc = null;
    String urlStr="";
    urlStr="http://172.16.245.151/test/page1.jsp";
    try {
    URL u = new URL(urlStr);
    uc = (HttpURLConnection) u.openConnection();
    uc.setRequestMethod("GET");
    uc.setDoOutput(true);
    // uc.connect();
    OutputStream out = uc.getOutputStream();
    out.flush();
    out.close();
    catch (Exception ex) {
    System.out.println(ex.getMessage());
    public static void main(String[] args) {
    httptest tt = new httptest();
    tt.test();
    The sample class just can send a request..Now we think of the sentence :uc = (HttpURLConnection) u.openConnection();
    Obviousely, a HttpURLConnection can just have a Object of the Class URL, and the Class URL have no setURL mothed. So I can't use a HttpURLConnection to send two request.
    I just want the HttpURLConnect is the same to IE...Do you understand what I mean?
    Any helps will be appreciated...

    As the title, I want to send two or more requests in the same connection with HttpsURLConnection..I wish all requests are in the same session.
    My code is as following:
    package test1;
    //import javax.net.ssl.*;
    import java.net.*;
    import java.io.*;
    public class httptest {
    public httptest() {
    public void test() {
    HttpURLConnection uc = null;
    String urlStr="";
    urlStr="http://172.16.245.151/test/page1.jsp";
    try {
    URL u = new URL(urlStr);
    uc = (HttpURLConnection) u.openConnection();
    uc.setRequestMethod("GET");
    uc.setDoOutput(true);
    // uc.connect();
    OutputStream out = uc.getOutputStream();
    out.flush();
    out.close();
    catch (Exception ex) {
    System.out.println(ex.getMessage());
    public static void main(String[] args) {
    httptest tt = new httptest();
    tt.test();
    The sample class just can send a request..Now we think of the sentence :uc = (HttpURLConnection) u.openConnection();
    Obviousely, a HttpURLConnection can just have a Object of the Class URL, and the Class URL have no setURL mothed. So I can't use a HttpURLConnection to send two request.
    I just want the HttpURLConnect is the same to IE...Do you understand what I mean?
    Any helps will be appreciated...

  • My mac is running 10.7.2 and wondering why the "find my mac" feature is not working. Instead, it says I need to system upgrade requires.. I believe it's already upgraded together with the 10.7.2

    My mac is running 10.7.2 and wondering why the "find my mac" feature is not working. Instead, it says I need to system upgrade requires.. I believe it's already upgraded together with the 10.7.2

    i get the spinning beach ball in all of my applications
    have a look at this article: Troubleshoot the spinning beach ball

  • How to make the wifi connection with Ipad in china since it requires user's name and password.

    How to make the wifi connection with Ipad in china since it requires user's name and password just like the dialed-up?

    The same way you would connect to a secure wifi network in any other country. Supply the username and password when prompted.

  • Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    First thing to try is reset Printing System:
    OS X Mavericks: Reset the printing system
    Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1.

  • How can we find the hostname of the devices connected with the interfaces of switch?

    how can we find the hostname of the devices connected with the interfaces of switch ? I have tried mac address and ARP, there are lot of servers connected with the switch having multiples LAN cards. So mac table shows the mac of physical machine as well as virtual machines. But i want to know only the physical machines. Is there any other method to find out the IP address, hostname of the physical machines only? 

    Hello Leo Laohoo
    Thanks for this information
    In our network most of the Servers are not of Cisco. Some of them are Vmware machines, some are Hyper V machines, etc. 
    Does IP device tracking show us only the IP addresses of the Physical Machines of the Vmware Server not of Virtual Machines?
    Regards
    Mukesh Kumar
    Network Engineer 
    Spooster IT Services

  • It seems my issue was with the Firewire connection with the

    I am having an issue with my Ipod and 20inch display firewire connection. (as long as the Firewire connection went directly into the PowerMac, I have no issue.) But when I am using the display firewire connection, wont connect. So I have to use the USB connection on the display for my music transfer.... This is a brand new display and powermac which I got today.
    It seems my issue was with the Firewire connection with the Cinema Display.
    Can anyone help

    Same problem here. I can sync the audio files without problem, but when it starts syncing my photos (on a mac 2.7ghz g5 with 20" cinema) i get a "required file not found" error. This only happens when the ipod is connected to the cinema firewire port, not direct to the back of the g5. when i connect to the back of the g5, i get no errors.

  • The only time the sound/speaker and mic don't work is when I answer or make a call

    The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice. 
    When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
    If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in. 
    I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible. 
    Hopefully the following will provide good clues:  On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

    Let me try and address some of your questions.  I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
    First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone.  So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes.  On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them.  In iTunes, you can go to Store > Check for available downloads. )
    Whenever you plug your phone in, it should create a backup of everything you have on the phone.  This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone.  You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup.   If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
    The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
    You should have no problems restoring from a backup if they give you a new phone.  However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device.   I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
    I've had no problems with my new phone so far.
    I'll try to keep checking this thread if you have any other questions or need more clarification.
    Edit: I should say we never did figure out what exactly was wrong with my phone.  The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one.  But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else.  Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
    Also if you don't already have one, make a genius appointment ASAP.  Most stores are very busy and their appointments fill up fast.  I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you.  The easiest way to make an appointment is to download the Apple Store app.  It detects the closest Apple store from you and makes it quite easy to schedule a genius.
    Message was edited by: deddinty

  • Why my Photo-smart D7260 Touchscreen don"t work anymore?

    why my Photo-smart D7260 Touchscreen don"t work anymore?
    Is any solution for that?

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? Specifically what operating system are we using and are there any error condition? Is the display blank or 'stuck'?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Connection with PC Suite stopped working

    Hi there,
    Up until last week, PC Suite and my phone use to work perfectly. For some reason, i can no longer connect my phone (nokia e61i) and laptop anymore.
    I have uninstall / re-installed PC suite without success
    When I try ti pair my phone again, i go into the connection window, seach for a bluetooth connection, then in step 3 of 4 PC Suite show's a list of phone that i use to be connected to (before i had the problem). i cannot go any further in the connection setup process. I then tried to unpair my phone, and I get an error message 'cannot unpair phone'.
    I really don't know what the problem is, but this is causing major problems for me as I use my phone calendar everyday and I can no loger sync with my laptop. Appreciate any assistance. Below are my specs: 
    PC Connectivity Solution:
    Version 8.47.6.0
    [Nokia Connectivity Cable Driver:]
    Version 7.1.8.0
    Operating system:
    Microsoft Windows XP 32-bit Edition, Service Pack 2
    Language: English
    Language for non-Unicode programs: English
    Detected Internet browsers:
    - Microsoft Internet Explorer 7.0 (Default browser)
    Detected Bluetooth stacks:
    - Microsoft (Version: 5.1.2600, Build: 2180)
    - Broadcomm (Version: 5.1.0, Build: 4800)
    Thanks
    Alex

    I have probably the same problem it was working fine, but some time in January 2009 it the connection with PC Suite ceased working. I have produced this error over cable as well as IR.
    Version of Windows: Microsoft Windows XP Professional Version 2002, Service Pack 2
    Version of PC Suite: 7 1 18 0 eng web
    Connection method: cable, and IR?
    Phone: E61i
    1. I connect the phone.
    2. PC Suite says "Click here to connect a phone"
    3. I click and the connection wizard opens
    4. I select "Infrared"
    5. PC Suite immediately opens new window that says "You have now the following connections available:
    Nokia E61i IrDA"
    6. I click the green button and return to PC Suite that still says "Click here to connect a phone"
    7. If I click on synchronisation, the synch button is not enabled: I cannot synchronise or use any other application in PC Suite. But if I right click the IR symbol on windows and select "transfer files" then I can send a file to the phone.
    Would really appreciate help on this.
    Thanks

  • Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

    Hi Team,
    Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
    and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
    Regards
    Sahil bhateja

    Hi，
    So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
    Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
    Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers. 
    if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for