Why the Adobe Flash can't work.

my computer's system is Win 7. I have installed the Adobe flash, but i can't see any flash modules on website.
I need work on my website so i need to update the banner on my [spam link removed] website. My system is re-installed 3 days ago. Adobe flash installed fail first, after that i re-installed it again and succeed. But i can't see any banner on website. I use the Adobe Flash and Adobe reader some years. I like it, i don't want to replace it to others. Who can help me, thanks so much!

I'm assuming you are using Internet Explorer 9 as your browser, if so can you follow the instructions on these two pages?
Enabling Flash Player in Internet Explorer 9
ActiveX Filtering in Internet Explorer 9
Thanks,
Chris

Similar Messages

Why the Adobe Flash Player's download is stuck at 25% for hours?

Hello! I have a MacBook Air. When I try to install Adobe Flash Player, the download stops for hours at 25 or 30%. Could someone help me?

Thanks a lot!
Le 23 mars 2015 à 17:13, m_vargas <[email protected]> a écrit :
Why the Adobe Flash Player's download is stuck at 25% for hours?
created by m_vargas <https://forums.adobe.com/people/m_vargas> in Installing Flash Player - View the full discussion <https://forums.adobe.com/message/7333434#7333434>
Hi,
Please try the offline installer posted at the bottom of the Installation problems | Flash Player | Mac <https://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html> page, in the 'Still having problems' section.
Maria
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7333434#7333434 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7333434#7333434
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Installing Flash Player by email <mailto:[email protected].hosted.jivesoftware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 36>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Why will adobe flash player not work on my mac?

Hi, I just got my mac back from the apple store and sadly I lost all my data so its a 'new mac' and i had to set it up from scratch etc.
I am unable to watch videos on youtube and other sites that need Java or Adobe flash player EVEN THOUGH I have downloaded and uninstalled several times and each time it doesnt work. Ive checked in safari prefferences that 'enable java-script' and 'enable plug-ins' is on but it still will not work!
Ive been on system prefferences and checked the java and adobe application prefferences to see if i can add the websites oor something but it will not work.
my mac is deffinetly up to date to the latest version, i have checked several times and i have made sure that it is the correct adobe flash player most recently updated etc, but it will still not work! ive been researching for a couple of days now and cant find anything that works.
Someone Please Help!!!!!
This is a screen shot of what is happening with the adobe flash player:
'clicking on manage website settings'
why will it not work!!??
please help!!!!

The reference in the screenshot above is about "Adobe Reader", not about Adobe Flash Player."
Install Adobe Flash Player
http://get.adobe.com/flashplayer/
Security turned on?
System Preferences > Security & Privacy > General
Select App store & identified developers

The Adobe Flash plugin not working

I downloaded and installed the Adobe Flash plugin last version (11), but Firefox doesn't recognizing it and asking me again to install it. OS - MAC, version 10.6.8

You can find the latest Flash player for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
For Firefox on 64 bit Windows, you need the 32 bit Flash version version because Firefox is a 32 bit application.

Why the multiple selection can't work in sub screen

hi experts:
 when i try to use the sub-screen in the report,why the multiple selection function(SO_BCTXT) can't work normally in screen 1095:
the coding as below.will reward points if solve this issue
the main program in Subscreen:
PROCESS BEFORE OUTPUT.
module status_1005.
CALL SUBSCREEN area INCLUDING sy-repid lv_tab_number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_1005.
module user_command_1005 input.
my_ok = ok_code.
clear ok_code.
case my_ok.
 when 'TAB1'.
 mytabstrip-activetab = my_ok .
 lv_tab_number = 1095.
 when 'TAB2'.
 mytabstrip-activetab = my_ok .
 lv_tab_number = 1096.
 when 'CRET' or 'ONLI'.
 perform get_bc_set
 using
 so_chanb[]
 changing
 <fs_bcsetfield> .
 leave to screen 0.
endcase.
endmodule.
in the screen 1095:
PROCESS BEFORE OUTPUT.
MODULE %_INIT_PBO_J.
MODULE %_PBO_REPORT.
MODULE %_PF_STATUS.
MODULE %_SO_BCTXT.
MODULE %_END_OF_PBO.
PROCESS AFTER INPUT.
MODULE %_INIT_PAI_J.
CHAIN.
FIELD SO_BCTXT-LOW.
FIELD SO_BCTXT-HIGH.
MODULE %_SO_BCTXT.
ENDCHAIN.
FIELD !INCBCTY1 MODULE %_INCBCTY1 .
FIELD !INCBCTY2 MODULE %_INCBCTY2 .
FIELD !INCBCTY3 MODULE %_INCBCTY3 .
FIELD !INCBACT MODULE %_INCBACT .
FIELD !INCBINAC MODULE %_INCBINAC .
FIELD !INCLMAND MODULE %_INCLMAND .
FIELD !INCLOPTI MODULE %_INCLOPTI .
CHAIN.
FIELD SO_BCTXT-LOW.
FIELD SO_BCTXT-HIGH.
FIELD INCBCTY1 .
FIELD INCBCTY2 .
FIELD INCBCTY3 .
FIELD INCBACT .
FIELD INCBINAC .
FIELD INCLMAND .
FIELD INCLOPTI .
MODULE %_BLOCK_1095001.
ENDCHAIN.
CHAIN.
FIELD SO_BCTXT-LOW.
FIELD SO_BCTXT-HIGH.
FIELD INCBCTY1 .
FIELD INCBCTY2 .
FIELD INCBCTY3 .
FIELD INCBACT .
FIELD INCBINAC .
FIELD INCLMAND .
FIELD INCLOPTI .
MODULE %_END_OF_SCREEN.
MODULE %_OK_CODE_1000.
ENDCHAIN.
in the main report
selection-screen begin of screen 1095 as subscreen.
enquire Data
data l_text type as4text.
selection-screen begin of block b1 with frame title text-024.
select-options :
so_bctxt for l_text .
selection-screen skip 1 .
parameters:
incbcty1 type c as checkbox default abap_true ,
incbcty2 type c as checkbox default abap_true ,
incbcty3 type c as checkbox default abap_true .
selection-screen skip 1 .
parameters:
incbact type c as checkbox default abap_true ,
incbinac type c as checkbox default abap_true .
selection-screen skip 1 .
parameters:
inclmand type c as checkbox default abap_true ,
inclopti type c as checkbox default abap_true .
selection-screen end of block b1.
selection-screen end of screen 1095 .

Hiii
 In main program you have dclared subscreen area.
now First of all you have to declare a selection screen in your main program
selection-screen begin of screen 1005 as subscreen.
SELECT-OPTIONS s_bukrs1 for v_bukrs. "whatever you want in selection screen
selection-screen end of screen 1005.
IN PBO of your main screen (not in 1005) write
call subscreen SUB1 including sy-repid '1005'.
where SUB1 is your subscreen area name. And remember don't touch PBO or PAI of your 1005 screen, otherwise it will give you error. Yuo can just put text in layout of 1005 screen. but don't disturb other things.

Why the adobe reader can not show Chinese word

Hi All,
i am using WinXP SP2, CFMX7 version 7.0.1, MySQL and the
latest version of report builder.
i wish to do a report which can show chinese word and english
word as well. However, the report can only show english and the
report will replace '?' in every chinese character. Why and how to
solve it?
The CF can insert chinese charater into DB.

[email protected] wrote:
> Dear Paulh,
>
> no font can display chinese.
> Where should i trun on identity-H? i dint see.
preferences or simply press the F8 key.
> when i enter chinese character into my DB, the cf able
to catch and display on
> the screen. BTW, if u insert chinese character within
<cfoutput>#??#</output>
> , an error msg will display. If u insert like this
<cfoutput>??</output>, it
> will display as '??'
not following you.

Help-Why is the new version of Adobe Flash Player not working?

I recently restored my PC to a date of about a 2 months earlier and when Adobe updated to the new version it stopped working. when I try to play any games or look at any videos that require Flash Player it says needs to update your version of Flash. I have updated it twice and then uninstalled and downloaded it again and restarted my PC. Still no luck. I am a dummy when it comes to computers so if you have any suggestions please explain them in dummy terms! I appreciate any help!!!!

I finally figured it out. Flash Player had not installed. I had to de-activate Active-X thru the safety tab on the menu bar and then download the Adobe Flash Player and now it's working. I re-activated Active X after I finished installing Flash,. Hope fully everything will keep working fine!

When I try to open firefox it says that it is not responding, after I disabled the adobe flash plug-in it worked, how do I get it to work with flash

Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

IE uses a different version of Flash than other browsers use. You need to install the Plugin version of Flash for Firefox.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.

Why is Adobe Flash now asking me to quit 'QuicklookUIHelper' never had this issue before I upgraded to 10.8.5! Is there an alternative to Flash do I can watch Youtibe?

Why is Adobe Flash now asking me to quit 'QuicklookUIHelper' during install? I never had this issue before I upgraded to 10.8.5! Is there an alternative to Flash if I want to watch Youtibe or play material that uses Flash? Thanks in advance!

http://hoyois.github.io/safariextensions/clicktoplugin/ and other extensions work if the website has alternatives to the Flash content (much of youtube does) but otherwise, no.
You may need to restart before installing Flash.

In Firefox, I can NEVER do the Adobe Flash Player 11 Update

Question
In Firefox, every time the Adobe Flash Player Update box shows up, I click on it, it scrolls right as it downloads, then I am asked to read the license, which take me to a page of a thousand license agreements. I choose the Flash Player 11 license, it opens in Arabic, and even if I was able to read the license agreement there is NOWHERE on the read license agreement page to then start the update. How can I possibly achieve the update when Adobe does not follow standard practices and make it as easy as all other companies. Is the update just a scam to get me to pay Adobe the $29 to $39 fee so that they can tell me how to do the update that they on purpose made it impossible to do without paying them a fee to tell me how? I have not been able to do the update for over 3 years since I bought my new Apple iMac. Do I really need the update? Obviously I have done without it for 3 years!

Note that FlashPlayer works with both Internet Explorer and other browsers such as Firefox, the plugins required though are different. If you use '''I'''nternet '''E'''xplorer and Firefox you have to install both types of plugin, you possibly have so far only installed the type used by IE.
* see [[how do I install the flash plugin?]]
You should be using Firefox 7.0.1, Firefox 6 is no longer supported or secure.
* see [[updating firefox]]

Adobe flash player wont work and wont reinstall can anyone help?

my adobe flash player quit working i uninstalled it and redown loaded it. several times but i keep getting this message [ blocked plug in ] what can be done?

First update to 10.6.8.
Two bugs, one affecting Apple's Mac platform and another attacking Microsoft's Windows, exploit certain Flash player vulnerabilities to install malware onto users' systems, reports ArsTechnica. While users of other operating systems like Linux have yet to report attacks, Adobe's advisory notes the exploit affects all platforms.
Designated as CVE-2013-0634, the first vulnerability targets the Safari and Firefox Web browsers running on OS X, and is also being used as a trojan to deploy Microsoft Word documents containing malware. For Mac users, the flaw affects Adobe Flash Player version 11.5.502.146 or earlier.
On March 1 Apple again blocked Flash Player for Lion and Mountain Lion:
http://support.apple.com/kb/HT5660
The Adobe Flash patch can be found on Adobe’s website, and users can visit this page to check if their software is the most curent version.
You should uninstall any previous version first, and repair permissions after installing the new version.
If you still get a ‘plug-ins blocked’ message:
http://support.apple.com/kb/HT5271

My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad one.

My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .

Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How do I get the Adobe Flash Player 10 to Work (Windows XP SP3)?

I am a Premiere Elements user who occasionally exports the Timeline to Adobe Flash Video (.flv). And, occasionally I convert the .flv export to .swf with a free .flv to .swf converter. An installed Macromedia Flash Player 8.0 successfully plays back the .swf, and an installed Adobe Media Player 1.7 successfully plays back the .flv.
Right or wrong I got the idea that the Macromedia Flash Player 8.0 was really a very old version of what is now the Adobe Flash Player. So, I decided it was time to update the Macromedia Flash Player 8.0 to Adobe Flash Player 10. At this point, I have the following installed on my Windows XP SP3 computer via Adobe downloads:
Adobe Flash player 10 Active X
Adobe Flash player 10
Adobe Shockwave Player 11.5
The Adobe web site verification tells me that as well as the computer Control Panel Add/Remove program list.
But, no matter what I do, .flv insists on opening only with the Adobe Media Player 1.7 and the .swf only with the Macromedia Flash Player 8.0.
I have tried
a. browsing to another Open With choice
b. changing file association in folder options as well as a few uninstalls/reinstalls and have been unsuccessful in these attempts. At one point I thought that maybe uninstalling the Macromedia Flash Player 8.0 would be an approach, but I cannot find it to uninstall it. I have looked in Program Files, Documents and Settings/Application Data, Local Drive/Windows/System32, tried the computer Search...all with no luck. My browsers are Internet Explorer 6 and Firefox 2.0.0.20. The default browser is Firefox and all the appropriate "allows" are in place.
If anyone could point out the errors of my ways, I would appreciate it.
ATR

I have resolved the issues presented without having to find and uninstall the Macromedia Flash Player 8.0 in order to get "Adobe Flash Player 10" playback of .swf files on my computer. When I begin this task, I expected to download an "Adobe Flash Player 10" as a player program download instead of the Internet Explorer and Firefox plugin that it appears to be.
This is what I did and what I believe I have:
1. I setup Internet Explorer 6 as my default browser and then used the following site to download Adobe Flash Player 10
http://www.adobe.com/products/flashplayer/
2. As I had done before (and also suggested in another thread here), I went to Tools/Manage Add Ons and found Shockwave Flash Object, highlighted it, and clicked on Update Active X. Next, what I did not do before, I restarted the computer immediately after that.
3. Next, I set Mozilla Firefox as my default browser and then used the above site to download Adobe Flash Player 10 again.
4. With Firefox, the critical step included Firefox Tools/Options/Content with File Types (Configure how Firefox handles certain types of files) and the Manage Tab there. SWF Shockware Flash Object/Change Action/and dotting "use this plugin" - Shockwave Flash, followed by a computer restart got the job done.
Now, if I want playback of a .swf file, I can
a. Open With Internet Explorer (assumed with the Adobe Flash 10 "plugin")
b. Open With Mozilla Firefox (assumed with the Adobe Flash 10 "plugin")
c. Open With Macromedia Flash Player 8.0
I am satisfied with those results for my use. Any additional comments on the player vs plugin aspect of the matter would be interesting and helpful.
ATR

I have installed the adobe flash player and have enabled it, but it still will not work. How do I fi

I have downloaded the Adobe Flash Player and enabled it but it still wont work. How do I fix it?

http://forums.adobe.com/thread/1195540

Why the Adobe Flash can't work.

Similar Messages

Maybe you are looking for