Why the alarm dosn't work when the iphone off?

why the alarm dosn't work when the iphone off?i make alarm then i switch the phone off .but the alarm didn't work .in the past nokia phones it was work

"Standby" (or "Sleep" is the phone's normal state when not in use. "Off" is when the phone is totally shut down by holding down the Sleep button the doing the "Slide to Power Off" on the screen.
If you believe it is dangerous to be in the same room as an iPhone, your question is pointless. I suggest you invest in a clockwork alarm clock.

Similar Messages

Why won't my pandora work when I'm not on wifi? I have the cellular data on for it but I never works. Also pandora isn't the only app of mine that does that.. What's wrong with it??

Why won't my pandora work when I'm not on wifi? I have the cellular data on for it but I never works. Also pandora isn't the only app of mine that does that.. What's wrong with it??

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

HT204266 Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i do?

Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i have to do?

You can try cleaning the headphone jack. However, I suspect that th headphone jack needs replacement.
Apple will only exchange your iPod for a refurbished one for this price.
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

Why the iPhone vibrates 2 times when the iPhone OS is starting?

Someone know why the iPhone vibrates two times when the iPhone OS is starting (and the apple logo appears)
In my case, this rare event occurs when a problem with an application (3rd party) force to iPhone to restart or when occurs a problem during the sync with iTunes. After this event, my iPhone never load (your OS) and the only way is the restore.
null

Amazing how much trouble when can get into by taking shortcuts before we understand something... isn't it....
Read the API and find out for yourself what events are triggered by a JButton......
Remember thsi advices:
1) Before using shorthand event handling, make absolutely sure that you understand the process back to front...
2) Write your own event, listener and implementer in order to get a clearer picture...
3) Until this is clear to you, always implement the appropriate listener and override the necessary methods....

Why won't my ipod pause when I turn off the ignition in my car? It used to.

Why won't my ipod pause when I turn off the ignition in my car? It used to.

How is the iPod connected to your car stereo?, (via earphone jack or iPod dock connector)
By "pause" you mean that now it is playing thru your car stereo, while previously, it stopped playing thru your car stereo, when you switch off the ignition?
Anyway, I don't think it is an iPod problem, but you can try the
iPod Hard Reset -> Press Menu and Center button simultaneously for about 10 secs till the Apple logo comes ON.
Then release the buttons
Select your preferred language.
refer to this Apple supprt Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
This reset wont delete any of your songs, just put all the settings back to when you first took it out of the box.

Why the iPhone gets heated when someone uses the internet?

Why the iPhone gets heated when someone uses the internet?

because that's what happens when use electronic devices...they warm up.

Why the iphone 4 does not have sound when I watching the recorded video?

why the iphone 4 does not have sound when I watching the recorded video?

Have you turned up the volume?
Try the buttons, or the bottom audio slider.
Does your phone normally play audio?
And have you tried to record and audio note to check if your microphone is not faulty.

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Why does my MacBook stop working when I tr to plug in my iPad to do some file syncing?

Why does my MacBook stop working when I try to plug in my iPad to do some file syncing? This is the second time I have had it happen to my MacBook. The computer just shuts down and cannot be restarted. When I plug it into the charger I get a faint Green light where it plugs into the MacBook. When I took the computer into my local Mac store last time this happened (Nov 2012) they reckoned they couldn't find anything wrong with it. Has any body else encountered a similar issue?

That would be a filter, yes. Didn't know Verizon handed out phone/DSL wall split filters. I would honestly take a look at the physical jack it is connected to for corrosion or lose connections as I doubt the filter is bad out of the box. Anyways, what was the original problem you had with the Phone and DSL that prompted Verizon to send out a filter?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

Why do some apps no work when you plug in car charger?

why do some apps no work when you plug in car charger?

Dunno... but if you want need help, provide some details.
Which apps? Have you contacted the developer of those apps to ask them?

My screen dosn't work when heated up! 5s

My new iPhone 5s dosn't work when I have used it in 10-20 minuttes. It dosn't react correctly (react the wrong places) or it becomes slower and freezes. Is it normal or do I have to do something about it?

Try to set it up as new device, explained here:
How to back up your data and set up as a new device
If the problem persists, get it serviced by Apple:
Apple - Support - Service Answer Center

Why the iPhone 4 16GB drains out the battery faster after upgrading to ios 5?

Why the iPhone 4 16GB drains out the battery faster after upgrading to ios 5?

Not sure, but try this:
Let the battery drain to below 20% (I went to about 14%).
Plug your phone in and leave it to charge COMPLETELY. This took my phone somewhere around 4 hours to complete.
When you're done, you may have better luck keeping a charge.
iOS 5 adds a lot of additional communication, and every time you connect wirelessly to anything, more power is used. Even so, some people report that a battery cycle like this helps. It seems to have worked for me.

I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.

I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.

One likely reason is the % battery is not that accurate because of the smaller battery capacity in the iPod compared to iPhone and iPad. Users why use a % battery app post that the % reading changes a lot.

Why the alarm dosn't work when the iphone off?

Similar Messages

Maybe you are looking for