Why?? The bug of iso5?

1. When the upgrade. Ios5, I found the screen wake speed slow: you use the power button locked your iPhone
In 30 seconds, and then you use the home key or keys to power your iPhone, you will find that the screen is not a bit
Bright, but to delay almost a second time. Maybe you think I ****, but please lock
Your iphone,
Please try in 5 seconds you wake up the screen, you will feel is immediately bright, a little hesitation and No. More strange
If your iPhone is connected to a computer or are out of state of charge, everything is normal, even after several hours
Wake up bright immediately, and 5 seconds in wake is the same. But not in charge or computer connection state, the lock screen
30 seconds to wake up the screen you will feel dull.
2. 
When you lock
The screen after 30 seconds after using home key or the power button to awaken your screen, please see this time, but I just
Speak dull outside, you'll find out the following
The slider above the word" slide to unlock" each word in turn flash
Bright white effect there is also the issue of" 30 seconds to wake up the screen, the first time I like white light flashes to the slide word,
Is a third, then a white light did not continue to flicker to fourth words, and then again from the first word start flashing
The". After I found out many times, just what I said above, charge and to lock the screen after 5 seconds will not wake up the screen
The slow second phenomenon, these 2 kind of situations will not occur following word flashing is not normal, only to lock the screen for 30 seconds
After wake up the screen with" slow seconds on screen flicker phenomenon and characters not normal phenomenon".

Please repost this question in the appropriate section of the Discussion Forum.
This forum is for general suggestions and feedback about the OTN site. For technical question about an Oracle product,
You can also use our new offering called OTN Service Network:
For Oracle Advice/Minimal Support (fee based) on Reports, Forums,
SQL*Plus, and PL/SQL, please go to: http://www.oracle.com/start/otnServiceNetwork/intro.html?src=9123 86&Act=6
For customers with paid support (Metalink) please go to:
http://www.oracle.com/support/metalink

Similar Messages

  • Why issues in the bug tracker are ignored?

    Almost 3 months ago I opened two ticket in Mojarra bug tracker.
    https://javaserverfaces.dev.java.net/issues/show_bug.cgi?id=1751
    https://javaserverfaces.dev.java.net/issues/show_bug.cgi?id=1752
    The first one is really important, it limits "redirect after post" pattern usage. I would use flash scope to keep operation status message across second GET request after initial POST request. But the flash scope is broken in RI :-( The issue was discussed on this forum also: http://forums.sun.com/thread.jspa?threadID=5445714.
    I'm wondering why the opened issue have been ignored for 3 months. The issue status is still unconfirmed, but all information required to reproduce the error was provided. I'm really worried about JSF future if the development team ignore the community.
    Fortunately there is a competitor, MyFaces ...
    Marcin

    Hi,
    My complaints about Mojarra team ignorance brought some effect :-) Today morning I got notification that Ed took ownership of
    https://javaserverfaces.dev.java.net/issues/show_bug.cgi?id=1751
    Thanks,
    Marcin

  • Why my iphone produces a bug after it renew for OS5.1.1. The bug is when I use message, type a Chinese word, and then using a releveant word, then the program automately closes. Every time I try the same procedure, it definitely closes.

    Why my iphone produces a bug after it renew for OS5.1.1. The bug is when I use message, type a Chinese word, and then using a releveant word, then the program automately closes. Every time I try the same procedure, it definitely closes.

    Nobody knows? Not even administrators?
    Please it would be really nice to have help on that to take all the benefit of the remote app.
    Thank you very much in advance.

  • Just upgraded to 10.9. was hoping it would fix the bugs in the last system.  now my Epson scanner won't work.  Downloaded their newest software.  No go with the new OSX. Why would Apple roll out a new free upgrade that interferes with Epson?

    Just downloaded OS 10.9.  hoped it would fix bugs from the last version.  now I can't use my Epson perfection 4870 scanner. Cehcked with Epson. They say the software is an Apple update.  checked with Apple-No Go.
    For now my Scanner just won't work.  I'm surprised Apple would introduce new OS material -free- which compromises a good vendor like Epson.

    nope, Barney.
    My issue is   a large amount of money spent over many years on computers for my company, myself, wife and sons. Got an investment here
    The company I favor, Apple sent me a message that they have a wonderful new Maverick operating system.
    I send documents back and forth to friends and people to do business. Hoped maverick would fix the bugs  from Leopard.
    With Maverick system, my main document sender, Epson perfection 4870 and its software doesn't work anymore, or so it seems to me.
    Checked with Apple, very apologetic, they can't help, maybe it will be fixed in a couple of days...
    Epson, referred me to Apple...
    I still ccouldn't send documents.
    Until my buddy Macjack pointed out the obvious- Image capture does the job. Thanks very much,MJ
    I didn't know that- not in the Apple help area, can't find it in their manual, their help line couldn't give me a clue to something as obvious as this
    So, lot of money over the years. Plenty of smart, well compensated folks writin code at both companies.  I can't keep up with tit all, they don't keep up with each other.
    Bottom line Apple releases a product  that doesn't work well for a lot of little people like me.  Maybe some clear expanation would help re:Macjack..
    I certainly don't understand all the ins and outs of a zillion dollar computer behemoth business model.  Do know this though, If I ran my business like this customers would go somewhere else and some would probably sue me.
    Thank you

  • Do anyone know why the desktops do not show? Is this a bug?

    Do anyone know why the desktops do not show?

    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Help! Macbook Pro Keeps Crashing.  Here Is The Bug Report

    Please, please, please can someone help me my mac keeps crashing for the last week and I dont know why.
    I  keep getting the grey screen of death
    I have included the bug report below.
    Mac Specs
    I have a Macbook Pro 17"
    Model Identifier: MacBookPro8,3
    Late 2011 Version
    2.2ghz Intel Core i7
    Intel HD Graphics 3000 512 MB
    Software  OS X 10.9.4 (13E28)
    I am running  the OS off an SSD 750 GB Drive connected internally (have been for over a year with no issues)
    The drive that came with my mac got corrupted so I replaced it with the SSD
    I am using an external monitor AOC connected via thunderbolt (have had this set up for over 1.5 years with no issues.
    Bug Report
    Anonymous UUID:       DDEA4723-7244-E776-B61A-34B381E8523F
    Tue Jul 29 23:34:57 2014
    panic(cpu 5 caller 0xffffff8003e4e5ca): "A kext releasing a(n) GenericUSBXHCI has corrupted the registry."@/SourceCache/xnu/xnu-2422.110.17/libkern/c++/OSObject.cpp:218
    Backtrace (CPU 5), Frame : Return Address
    0xffffff81ee4cbe00 : 0xffffff8003a22f79
    0xffffff81ee4cbe80 : 0xffffff8003e4e5ca
    0xffffff81ee4cbed0 : 0xffffff8003e9b6e7
    0xffffff81ee4cbef0 : 0xffffff8003ea9d0f
    0xffffff81ee4cbf30 : 0xffffff8003eaf292
    0xffffff81ee4cbf80 : 0xffffff8003eaf367
    0xffffff81ee4cbfb0 : 0xffffff8003ad7417
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
    Kernel slide:     0x0000000003800000
    Kernel text base: 0xffffff8003a00000
    System model name: MacBookPro8,3 (Mac-942459F5819B171B)
    System uptime in nanoseconds: 49357323350
    last loaded kext at 46443091940: com.apple.driver.AppleBluetoothMultitouch 80.14 (addr 0xffffff7f858c1000, size 77824)
    loaded kexts:
    com.bresink.driver.BRESINKx86Monitoring 9.0
    com.avatron.AVExFramebuffer 1.7
    com.displaylink.driver.DisplayLinkDriver 2.1
    net.telestream.driver.TelestreamAudio 1.1.0
    com.techsmith.TACC 1.0.2
    com.logmein.driver.LogMeInSoundDriver 1.0.3
    com.avatron.AVExVideo 1.7
    com.sonnet.driver.SXHCD 1.27.9b2
    net.osx86.kexts.GenericUSBXHCI 1.2.7
    com.apple.driver.AppleBluetoothMultitouch 80.14
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.filesystems.autofs 3.0
    com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
    com.apple.driver.AGPM 100.14.28
    com.apple.driver.AppleTyMCEDriver 1.0.2d2
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.ApplePolicyControl 3.6.22
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.kext.AMDFramebuffer 1.2.4
    com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
    com.apple.iokit.IOBluetoothUSBDFU 4.2.6f1
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.driver.AppleHWAccess 1
    com.apple.AMDRadeonX3000 1.2.4
    com.apple.driver.AppleIntelMCEReporter 104
    com.apple.driver.AppleIntelHD3000Graphics 8.2.4
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.AppleThunderboltIP 1.1.2
    com.apple.kext.AMD6000Controller 1.2.4
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.SMCMotionSensor 3.0.4d1
    com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
    com.apple.driver.AppleMuxControl 3.6.22
    com.apple.driver.AppleBacklight 170.3.5
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyEventDriver 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.driver.AppleIRController 325.7
    com.apple.driver.AppleFileSystemDriver 3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.XsanFilter 404
    com.apple.driver.AppleUSBXHCI 683.4.0
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.driver.AppleFWOHCI 5.0.2
    com.apple.driver.AirPort.Brcm4331 700.20.22
    com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleUSBUHCI 656.4.1
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.driver.IOBluetoothHIDDriver 4.2.6f1
    com.apple.driver.AppleMultitouchDriver 245.13
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.iokit.IOSurface 91.1
    com.apple.iokit.IOBluetoothFamily 4.2.6f1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAcceleratorFamily 98.22
    com.apple.driver.AppleThunderboltEDMSink 2.1.3
    com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.kext.AMDSupport 1.2.4
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.driver.AppleUSBAudio 2.9.5f8
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.AppleGraphicsControl 3.6.22
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
    com.apple.driver.AppleUSBMultitouch 240.9
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.driver.AppleThunderboltNHI 2.0.1
    com.apple.iokit.IOThunderboltFamily 3.3.1
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IO80211Family 640.36
    com.apple.iokit.IOEthernetAVBController 1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IOUSBFamily 683.4.0
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.pthread 1
    com.apple.kec.corecrypto 1.0

    Looks like the Open Source USB 3.0 driver GenericUSBXHCI is causing this. I'd suggest uninstalling it.

  • What is apple doing to fix the bugs from IOS 7.1.2 update? this update has ruined my phone

    What is Apple doing to fix the bugs from IOS 7.1.2 update??? This update has ruined my phone! Why would you put out a update you know is going to ruin someones phone? Whats being done? I have tried everything to fix my phone which was just fine before Apples IOS 7.1.2 update!!!

    I have also experienced issues with my iphone5 since updating to ios 7.1.2, prior to this update my phone was working perfectly fine and I know I didnt cause any damage to the phone because I baby my iphone as if it was my child. Ever since I updated to 7.1.2 my phone shutts itself down while I am using it, it can be while using whatsapp, browsing the internet or using apps, more than anything it fails while using the internet. The screen will either start to flicker or vertical lines will pop up and then the phone will fade to black, after this happens the phone will get really hot and to turn it back on I have to wait 5-10 minutes and hold down the power and home keys at the same time for about 15 seconds for it to turn back on, I have to wait 5-10 minutes because if I dont when I boot it back up it immediately shutts down again. This is a constant all day thing and for now i get by just making phone calls and sending regular text but I try to keep the action down to a minimum to prevent missing a phone call. I tried clearing the phone and rebooting it to original setting but this didnt fix it. After reading and speaking with several techs they tell me that ios 7.1.2 rolled out some performance adjustments one particular that affects the amp levels that the battery works at and supposedly the iphone 5 cant handle it, they explained that the phone for certain activities is asking for more or less power and the phone panics into safe mode and shutts itself down. My battery life is fine so I havent changed the battery like someone had suggested. In the diagnostic data it gives a panic.ips error. Id really like to know if there is any possible way to roll back to 7.1.1 through jailbreak or any other way, I was perfectly happy with this phone and didnt plan on buying another one for atleast 1-2 more years. If anyone can help me out this would be greatly appreciated, if not I hope apple is working to fix this.

  • What, exactly is the bug in PM8M3-V?

    I have searched this entire forum, and it seems that many have problems with this mobo. All the solutions seems to be to spend more money buying additional items to TRY to get it to work, and it seems the solutions are a waste of time and money.  Does anyone know what the bug is and can it be fixed or is this mobo a piece of junk?

    aqw8326, users come here to POST PROBLEMS,and very seldom have users come here to say they have an excellent product! That's why you hear more problems here, than praises of the products.

  • 9iAS : WHY THE HELL I NEED A CDROM ?

    Anyone wanna to laugh ?
    I've here one computer that it does not have a CD-ROM! I unzip 9iAS disks installation to the HARDDRIVE, and i try to install just clicking on ISETUP from the the 1st disk!
    I get an error "NO CD-ROM available"! WHY THE HELL i need a cd-rom i thought! And the installer shut off and don't give me a chance to install! Of course i went to other directories and found a SETUP.EXE and try it... but... BUGS, BIGS, BUGS... Some services wont start, sometime RUNTIME errors... etc!
    So, i thought... ORACLE for sure made an alliance with CREATIVE CD-ROM'S department and in every program they made a routine to check if a CD-ROM is present... and i install a CD-ROM on the computer and try it again...
    EUREKA... Setup launch from disk... but the CD-ROM presence WAS VERY IMPORTANT!!!!!
    THIS IS FOR ORACLE GUYS... Why the HELL i need a CD-ROM if i install 9iAS from HARD DISK ????
    Someone should be lay off!!!!!
    null

    Hi Joao,
    One possible solution is to use the silent install methods outlined in Chapter 6 of the install guide. The iSetup.EXE launcher is specifically designed for use from the CD's, since that is the most common method of distribution. However, you can also run the installation silently or semi-silently, depending on how much information you provide in the response file. The response files are organized on the first CD under the \silent\<install_type> directories.
    If you are installing the Enterprise Edition, please pay special attention to the silent install chapter, as there are several steps involved in handling the 8.0.6 RSF-based components to ensure that they are installed properly.
    Hope this helps.
    Best Regards,
    Larry

  • HT5313 How about fixing the bugs in iCal? and Sleep Mode?

    The 10.7.5 update sure has a lot of fluff patches. When is Apple going to fix something important, like all the bugs in iCal? And the bugs in Sleep Mode?
    Examples:
    • iCal events tend to pop up 30+ minutes late all day if I sleep the computer overnight. This has been going on since 10.3.9.
    • Network Issues: iChat sessions via Bonjour have to be manually restarted after coming out of sleep.
    • Disks mounted over the network dismount during sleep.
    • Screen Saver doesn't play well with other apps: I lock the screen when I'm away from my desk. If Firefox starts using all available CPU time while the screen saver is on, screen saver won't exit. This can make it very difficult to get control of the machine.
    How about a patch for the above?
    I'm a professional software engineer, so spare me the Blame The Customer tactics.

    PS. Best Example:
    • Last week I almost missed an appointment because iCal decided I wanted to be alerted to this event 9 hours after it happened. ... Maybe you think I typed it into iCal wrong. So what if I did? WHO THE #@$! WANTS AN ALERT *AFTER* AN EVENT HAPPENS? Why is it even an option?

  • Why the list of known errors and patches is not available from BEA (or maybe it is)

    If there is some page on beasys where one can check what patches for
    Tuxedo are available and what errors do they correct, please refer me to
    it and ignore the rest of this letter. But as far as I know, there is no
    such a page.
    During recent years a couple of times I or my colleagues had such a
    experience:
    - while testing our Tuxedo based software we observe some problems/errors
    - we spend some time (from a few hours to more than a week) to diagnose
    the problem, find that it is related to Tuxedo, create the problem
    description and contact support
    - the support replies that the bug is known and we can download the
    patch from some ftp (valid for 1-2 days)
    Why can't we just check whether there are known problems for our
    platform and patches we need for it before we face them? Why every
    customer must independently face the same problem? Why even the
    information what is the newest patchlevel currently available is not
    accessible publically?

    Hello,
    Please try using the following option at the BEA Website:
    Services-->Customer Support-->WebSUPPORT
    HTH
    rgds
    MS

  • CSCsr27209 is not visible to me in the Bug Toolkit

    Here's what I recieved when I tried looking up this Bug ID.......
    Dear valued Cisco Bug Toolkit customer, the bug ID CSCsr27209 you searched contains proprietary information that cannot be disclosed at this time; therefore, we are unable to display the bug details. Please note it is our policy to make all externally-facing bugs available in Bug Toolkit to best assist our customers. As a result, the system administrators have been automatically alerted to the problem.
    While we are working to resolve this issue, we invite you to reach out to the experts on the Bug Toolkit Support Community. You may find answers there to your Bug Toolkit questions, or post your feedback on our forum as well. Thank you.
    I'm kind of curious about why this is.  But I'm really interested in knowing about this bug because it involves VDSL technology that I'm trying to implement at work and now I may be forced to wait on a resolution.
    Thanks to anyone, and everyone, who is interested and willing to assist.

    Hi Arun
    From what that I understand from the "Cisco 880VA - DATA SHEETS" and from the "Cisco 880VA - Q&A" that found in these links
    http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78-613481.html
    http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67-612339_ps10536_Products_Q_and_A_Item.html
    The Cisco 887V supposed to support ADSL2/ADSL2+ & VDSL2 Automatic.
    Also in the "Cisco 860,880 and 890 Configuration Guide", it says that Cisco 887V can be setup to connect to the ADSL via the ATM0 interface. As you can see in the example over here:
    http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/routconf.html#wp1168916
    But none of that really happened.
    It seems that there is a fundamental bug with these devices that make it impossible to connect to the ADSL2 / ADSL2+ via the VDSL2 controller.
    Thanks
    Nitzan

  • Not grasping why the strcpy_s function only works once in this code

    I don't understand why the below strcpy_s  (BOLD, ITALASIZED) function shown below does not work. The one just above it does. I tried reading the HELP info, but just not grasping it. Can someone help in plain, simple english?? Thanks!
    #include <iostream>
    #include <cstring>
    using namespace std;
    class employee
        char name[80];                //private by default
        double wage;
    public:
        void putname(char *n);    //these are public
        void getname(char *n);
        void putwage(double w); 
        double getwage();
    void employee::putname(char *n)
        strcpy_s(name, n);
    void employee::getname(char *n)
        strcpy_s(n, name);
    double employee::getwage()
        return wage;
    int main()
        employee ted;
        char name[80];
        ted.putname("Ted Jones");
        ted.putwage(75000);
        ted.getname(name);
        cout << name << "makes $";
        cout << ted.getwage() << " per year.";
        return 0;

    Bohica -- it is helpful to explain what "Doesn't work" means.  In this case I assume you are referring to the fact that the line produces a compile error.
    error C2660: 'strcpy_s' : function does not take 2 arguments
    The basic strcpy_s function is defined as
    errno_t strcpy_s (char *strDestination, size_t numberOfElements, const char *strSource);
    Where the middle parameter is the size of the buffer that you are copying to.  The middle parameter is important to ensure that you don't overwrite the end of your array (a very common bug when using C-style strings and one of the most common security
    vulnerabilities out there).
    Now, when using C++, there is a special super fancy templated version of strcpy_s that is willing to take two parameters, but ONLY if the function can figure out the size of the destination buffer at compile time.  (The exact way it does this
    will probably give you a headache based on the fact that you appear to be learning C++).
    What this means, is that in employee::putname, you are copying the data to the class member name which the compiler can see has room to store 80 chars.  Because the compiler can see this, it can call the two parameter version of strcpy_s.  
    However in employee::getname you are copying to the parameter n which is a pointer to storage for an unknown number of char's.  Because the compiler cannot figure out the amount of storage you have in
    n, it cannot use the two parameter version of strcpy_s.
    Here is what you probably want to do:
    void employee::getname(char *n, size_t sizeOfBuffer)
    strcpy_s(n, sizeOfBuffer, name);

  • Why the error "unable to create unique temporary file" ?

    Hi,
    I've created a very simple zone on s10_69. The global zone is a default Solaris install, nothing added. When installing the local zones I get theses error messages:
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/100dpi/fonts.dirMMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/75dpi/fonts.dirNMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dirOMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/misc/fonts.dirPMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirSMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirUMaypm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/server/etc/OWconfigjha4tm>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/sfw/lib/mozilla/.pkg_update_stampepaybn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/75dpi/fonts.dirgOa4Gn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dirhOa4Gn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/Type1/fonts.diriOa4Gn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/misc/fonts.dirjOa4Gn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/misc/fonts.alias.alllOa4Gn>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirfGaWoo>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirhGaWoo>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/server/etc/OWconfigL2aqZo>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirgPaW7o>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirhPaW7o>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/xil/config1Faipp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/xil/config2_aWtp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirEhaywp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirGhaywp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirsVaqAp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.diruVaqAp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/bin/wscompilejbaWAp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/bin/wsdeploykbaWAp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/F3/fonts.dirioaqBp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/server/etc/OWconfigLYaaCp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dir10a4Dp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirZAaOEp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dir1AaOEp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirhUaqFp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirjUaqFp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirDNaGGp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirFNaGGp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.diryVaGLp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirAVaGLp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirdtaGMp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirftaGMp>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/100dpi/fonts.dirgZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/75dpi/fonts.dirhZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/F3/fonts.diriZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/Speedo/fonts.dirjZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/75dpi/fonts.alias.alllZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/F3/fonts.alias.allmZaWKq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/encodings/encodings.dirlqaGLq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/lib/X11/fonts/TrueType/ttmap/ttmaps.dirnqaGLq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/asadminsTaGNq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/pointbase/tools/serveroption/startcommander.shbHayPq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/pointbase/tools/serveroption/startconsole.shcHayPq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/pointbase/tools/serveroption/startserver.shdHayPq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/pointbase/tools/serveroption/stopserver.sheHayPq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/openwin/server/etc/OWconfigt2aGYq>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/appclienta2aOyr>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/asantb2aOyr>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/capture-schemac2aOyr>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/deploytoold2aOyr>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/jspce2aOyr>
    pkgadd: ERROR: unable to create unique temporary file </zones/zone2/root/usr/appserver/bin/package-appclientf2aOyr>and more like these.
    Any ideas why ?
    The files are all there after installation, without the temporary names. So it doesn't seem to be a big problem...
    Thanks,
    Vlad.

    I don't have the bug number handy but I'm quite certain this was
    resolved in one of the post-s10_69 builds. Please download the
    official Solaris 10 initial release and by all means, let us know if you
    continue to see this issue during zone installation.

  • Hello, I update my mac pro to 10.10. Why the photoshop cs6 change to slowly now. When I change the tools like brush to command+Z, It's will be freeze a while. why? and how can I improve?

    hello, I update my mac pro to 10.10. Why the photoshop cs6 change to slowly now. When I change the tools like brush to command+Z, It's will be freeze a while. why? and how can I improve?

    what a long post....Apple, btw, does not read this stuff, so ranting, raving, and complaining here might make you feel good, but it does no good at all. That being said, I, too have a Mac Pro Quad Core Xeon with 6 gigs of ram and an nVidia 8800 GT graphics card (not as good as yours, alas) and I've had no problems at all with it. Yes, it doesn't have Thunderbolt, but maybe we Mac pro owners will get lucky and someone will come out with an adapter (probably not). No, you probably don't have to throw away your Mac Pro, but if you do, I'll take it, for a small "recycling" fee >:-) That was a joke.  Yes, the Mac Pro's future isn't quite clear, YET. Hopefully that will improve very soon. As for not being able to upgrade to Mountain Lion. Don't worry about that too much, Nobody is forcing you to do that.  Your Mac Pro won't quit working if it isn't installed. From what  I've heard, you should give the new OS a chance, and wait to get it, in case there might be some bugs, or stuff not working with the new OS, which has been known to happen. Yes, we Mac Pro owners don't like being treated like mushrooms-kept in the dark, and being fed......... but Apple is Apple and it will do what it does, and there is nothing you or me can really do to change that. All I can say is....trust, have faith, be patient, go for a walk, do something else to take your mind off of this problem. IF apple decides to drop the Mac Pro for good, and that's a big "IF", I think they will anger a whole bunch of people
    which isn't good. However, that hasn't happened...YET. Let us hope that it doesn't
    John B

Maybe you are looking for

  • Battery issues!! takes 6hrs to charge and runs out in less 2hrs

    I've had my laptop(unibody 2008 model) for 8 months now. I've noticed that battery life is so much shorter than the one I had before (early 2007 model) However, when i took it to apple service center they said there's nothing wrong with the numbers a

  • Cost Center Authorization

    Dear Friends / Experts We have around 10 HR (BW/BO) reports. All are woking fine. Now the users wants to restrict the report based on cost center. Hence, I have created one DSO with relevent information and extracted the data from ECC ( Used id, Cost

  • Error in Dreamweaver

    Hi, I have an ASPX page with a form in it, which was all working fine until i added the following code to one of the <div> tags within the actual form: style="border-bottom:thin solid; border-top:thin solid; border-color:#000000;" Now whenever i make

  • Controlling multiple movies with one button

    Hi flash gurus, I have 4 movies of the same length running on my stage in the FLV playback component, with different instance names. I also have a single play/pause component. I want all of the movies to play together and unpause/pause when I press t

  • Install different language updates for my Apple ID

    Just bought a Macbook Pro Air in The Netherlands and configured its OS (Mountain Lion) in the English language. This is my preference. My Apple ID however is registered for The Netherlands (cannot change that as long as I have Dutch billing info). Ca