Why the checkmark in the Canvas window

This will be, by far,the dumbest question you have ever seen but how do I get rid of the Green checkmark in the canvass window. Also, what does it mean? I'm at the bottom of the learning curve here. Please bear with me here and humour me.

The green checkmark indicates that the video levels are OK. To turn off the overlay, go to the third button in the group of buttons at the center of the top of the Canvas window and uncheck Excess Luma. Or turn off overlays altogether by going to View->Range Check and select OFF.
-DH

Similar Messages

In migration assistant, using a time machine backup, what is the extra data that appears after I deselect all the checkmarks under the user?

When restoring a time machine backup using Migration Assistant, I'm given a choice of what to restore. If I click on a user, and I deselect everything(Desktop, Music, Movies, Documents, etc.) there is still 40 Gygabites of stuff. What is in the 40 Gygabites?!

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

Every time I open Firefox 8.01, on my WinXP laptop, the "bookmarks" toolbar disappears but the checkmark in the view/toolbars menu is still checked when I reopen it, just no bookmarks toolbar showing on screen, Is There A Fix For This?

I've tried everything including reinstalling Firefox. It began after a new WinXP update. If I go into the view file and uncheck, then check the bookmarks toolbar it shows up and functions fine but to have to do this every time I open the browser is annoying and it just started happening

Hi,
The "Tools" are in the old drop down menu, which are not shown by default in the new Firefox Design. To show this menu:
Firefox Menu > Customize
On the bottom left there will be Show/Hide Toolbars. The Menu will be listed here.

What does the checkmark on the far left mean?

I'm new to itunes - what does it mean if I have a song "checked" or "unchecked"? Thanks!

A ticked song means that it will be included in the next action e.g. if you're playing your music on your computer then only ticked songs will be played, unticked songs will be skipped over, and you can also only sync ticked songs to your iPad, iPod, iPhone. A list of all the iTunes symbols is on this page : http://support.apple.com/kb/PH1484

How do I change the checkmark color?

My company is looking to utilize Adobe Standard XI in moving from a paper process to a digital process for our workpapers. Our industry standard is for the reviewer to use a "blue" checkmark when they are reviewing the work of the preparer and the workpapers that have been assembled. When I use the "green" stamp checkmark it lets me edit the transparency of the checkmark but when I select "blue" as the color and mark to use as default box it does not change from green to blue. I have also tried to change the checkmark under the "Sign" tab from "grey" to "Blue" with no luck. I can also change the transparency of this checkmark. Why can I change the transparency but not the color? Given the wonderful flexability we are finding with Adobe's Annotation features it seems like such a simple feature to have overlooked. Are there any solutions for this? Two of my bosses have been using blue checkmarks as review marks for 40+ years. Kind of hard to ask them to change because the software can change color of the text, sticky notes and highlight but not the checkmark.
Thank you for your help.
Tanya

Two ways to add a blue checkmark:
1. Create a new custom stamp from "Stamps->Custom Stamps->Create Custom stamp..." with any blue checkmark image.
2. Change the default properties of the Sticky note icon to Checkmark and color to blue. But here the pop-up is opened each time you add a note.

Why do I have 2 iPhoto windows open?

Why do I have 2 iPhoto windows open? When I click on the dock iPhoto app it gives me 2 iPhoto window options. Do I officially have double iPhotos or have I some how duplicated it? How can I get back to one as Im already struggling with lack of memory space!

That screenshot is only showing you one iPhoto window - the one with the checkmark. The upper part are the recently opened libraries. You can check this by selecting "Show all windows":
iPhoto can have more than one window open, if you launched a dialogue, for example, if you are switching between libraries, you might see this:
Then the main application window is open, plus the dialog window:

Using Cap6, need to create menu screen that allows user to click a button, branch to other screens, and return to main menu. When returning to the main screen the button that was clicked will be grayed out or inactive. How do I do this? I created image

I am trying to emulate a piece of equipment. I need the user to be able to click on specific buttons that will take the user to another screen(s). After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed. I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button. How can I get that 3rd state to stay after user returns to the main screen?

Hi Elizabeth,
Since I just did this morning what you are currently attempting to do, I thought I'd share my method. I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out. However, I am happy to share here anything I have learned thus far.
First, here is what my initial slide looks like (see interaction slide below). I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide. Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance).
The initial slide (interaction slide):
Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below): Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed. The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
Content Slide 1:
Remember, there may be an easier way to do this in Captivate. I am using Cp6 for this module.
1. I created two user variables as follows
Name: v_batteryExplore
Value: 0
Name: v_fuelExplore
Value: 0
2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
I have also noticed that it matters where the buttons are located on the timeline. It seems best to have buttons above all other content. Not sure why, but I have had images not appear when I have not done this.
And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible. Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name. In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden. Here is a final screenshot of my timeline for this interaction. I hope this information helps you!

Odd action using the icon in the title bar of image in psCS5--???????

i use imac, lion.
by accident, i discovered that, clicking on and dragging the icon at the left of the title bar (actually within the title bar to left of file name), i can sometimes open the
image in ACR, as hosted by BRIDGE (which is not running. i do not use bridge).
sometimes the image will be duplicated following this dragging of icon, the new duplicate lying atop the image of the background layer, in the same window, and shows the diagonal bars awaiting resizing. if i just click the ("checkmark") in the options bar to accept this new layer, or, if i press enter, i am looking at a new layer, which is a duplicate of the background layer. this new layer is a "SMART OBJECT", and functions as such.
this happens only with JPG and TIF files, not with RAW. i have ACR prefs set to open all supported jpg and tif files.
i should note that none of this occurs if the image has been edited in any way. in fact, after any edit the icon in the title bar is not movable.
i am having some difficulty describing a simple and quick process. i don't know if this is a bug, a feature, or the result of too much RED BULL! i Just reread post and it does seem delusional.
can anyone help?

it seems to work with or without the shift key.
I work with OS 10.6.8 and you are right that it works without shift, too.
My surmise is that the title bar’s icon of non-dirty files (files that have no History steps save the Open-step or have just been saved) behaves like the file’s icon in the Finder as the behaviour seems to be exactly like a drag-and-drop from the Finder (as a Smart Object if set in the Photoshop > Preferences > General > Place or Drag Raster Images as Smart Objects, not if set otherwise) and works across files, too.
I don’t think I had noticed that previously, but that behaviour may well be fully intentional.

HT204120 i deleted the photos from the location on my pc after i got them on my iphone so i am unable to deselect and remove them as per you helped me ?? what can i do further

i was somewhat helped. but still i am getting problem to delete my photos that i synced last night via itunes on my pc. problem is i deleted the photos from the location on pc after getting them on my device, so i am unable to resync them, deselect and remove them as per i was helped by this communities i am new to use apple products so please help me as it has taken lot of memory in my device/

you say:- You need to keep the photos on the computer, since the ones that are synced to the iPhone are of reduced resolution and cannot be moved anywhere else. You can always remove the other folder if you do not want it.
BUT I DONT HAVE THE PHOTOS ON MY DEVICE(MY PC) I DELETED THEM.
further i tried this:-If you do not have another folder of photos that you can sync, then create an empty folder on the computer and sync that folder. That will delete the photos from the iPhone, then you can go back to iTunes, remove the checkmark by the empty folder and sync again, removing that folder from the iPhone.
Trying this it just removed the checkmark nothing else it did
i think i have no other option rather than to keep those synced photos on my device>

Bug? Unable to clear the graph from the timeline keyframe editor

Hello all, here's a first post from an FCP newbie.
While playing around with time remapping, I activated the Keyframe editor in the timeline (Option-T) and activated the Time Remap graph from its context menu. It promptly got a checkmark next to it.
After I was done, I was surprised to find that I was unable to deactivate the graph. Re-clicking the Time Remap > Time Graph item in the context menu does nothing: the checkmark stays there and the graph stays there. Selecting any other graph overwrites the current one and places the checkmark on the new graph, but this new graph exhibits the same symptoms as the previous one. There seems to be no way to simply clear the clip's keyframe editor from all graphs.
Has anyone else run into this?
The version of Final Cut Pro I'm running is 5.1.1.
iMac Core Duo 20" Mac OS X (10.4.6)

Try first reinstall the firmware. it problem persist, perhaps a software reset can solve this or hard reset? LOL..my standard answer tonight.
An app like "kill task" or netqin can be useful for you?
Search the forum for memory full and look in those threads.
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Canvas window - video plays back at different speeds from the timeline. Why

I've scanned 25 pages of topics but found nothing that mentioned this as a problem. When I play a sequence in the timeline, the video in the Canvas window slows down (and sometimes suddenly speeds up to catch up with the audio) About the audio, it sounds find regardless of how the video is playing back. if I hit the space bar to stop play back, the video snaps to the correct position.
Any ideas why?
Sometthings I've noticed : If I restart my computer, the video tends to play back fine. But if I leave the program open and use it alot, the play back problem happens over time. If I make the canvas window tiny (25% size), the video plays fine but at 50% - I get video speed changes. (audio, always good)
Here is what Im using : The project is about 20 mins long. I have over 50 gigs of HD space (the Macs main drive) Im using FCP version 4.5 on a Dual G5. 2.5 GB of Ram.
Well thanks to any one who respones.

When I play a sequence in the timeline, the video in the Canvas window slows down (and sometimes suddenly speeds up to catch up with the audio) About the audio, it sounds find regardless of how the video is playing back. if I hit the space bar to stop play back, the video snaps to the correct position.
Does this happen in any other sequences within this FCP project? Or, for that matter, with any other projects on your FCP system?
And, to confirm, your media is running off your system drive? That is, your machine has only one hard drive on it, correct? (Partitioned or not)

Why is sorting on the iPad, using Windows, so lame?

After finally being able to sort my photographs for my iPad, using Windows, in ascending/decsending order within a given folder a couple versions ago, is not longer available in the current version of the iPad operating system. - Why?
With as much attention Apple has paid towards giving the user very complete control over music, it is allmost insulting that my photographs (some 2,000; distributed within some 20 folders) are left to the devices of the iPad.
After several conversations with Apple techs (giving their best efforts) I am left with their conclusion that I wouldn't have this trouble with a MAC computer. And withing a PC, the sorting is controlled by the "date modified". If that were the case, I might be able to deal. But I catagorically say that it does not matter what order I change the modification, I still have no control.
Already owning the first iPad, my only rationalization for buying the iPad 3 was the high resolution of the new screen; which would show my photography at its best.
After several recent days, and earlier attempts a year or so ago, what was a rub is starting to really become irritating. If I didn't feel better, I'd have to think that Apple is starting to get the same of "arrogent" attitude it used to have with the first iPod.
I can't think I am the only one who cares about this issue. Would like to hear from as many who feel as strongly about their photographs as they do their music.
Thank you,
WillTheElder

Use third-party apps. For example, Photo Manager Pro has excellent sorting capabilities, which can be switched in runtime, without having to use a desktop for re-sorting. (See section "2.1.3 Sorting" at http://www.iphonelife.com/blog/87/all-one-photo-viewer-roundup-70-price-drop-bes t-image-viewer for a menu screenshot of this setting.)

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

Yea, and it's a pain to get to. What was the rational for removing the print size button? With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size. Of all the buttons you could have taken away, why not fill screen? I never use that.
Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop. The Brush preview window is unchanged in CC but in CC2014 it's basically worthless. If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

While installing Adobe Acrobat 8 on Windows 7 Professional why do I get the message "Adobe pdf.dll on windows Vista CD-ROM is needed.

While installing Adobe Acrobat 8 on Windows 7 Professional, why do I get the messaage "Adobe pdf.dll on Windows Vista CD-ROM is needed"?

Because your software is far too old for Windows 7.

Why can't I connect to the itunes store on my windows 7 64 bit pc

Why can't I connect to the itunes store on my windows 7 64 bit pc?

perfect, thanks.
When I try to connect to the itunes store, it says 'accessing itunes store' and just hangs there.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Why the checkmark in the Canvas window

Similar Messages

Maybe you are looking for