Why the click sound is not working after publishing?

Hello all.
I have around 190-200 slides in my project. I want my mouse object to have the click sound in some slides and without click sound in rest of the slides.
Using its properties panel I have added click sound for the required slides. But after  publishing the project I am unable to hear the click sound. When I refresh the page I could hear the sound. Why does this happen?
Regards,
Kartik.P

Hi,
Do you face this problem even with a single slide project? Because this seems to be working fine at our end.
Also, is it an upgraded project, single click or double click?? Does it happen only on few slides or all slides with mouse click sound.
Thanks,
Sikandar

Similar Messages

  • My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad one.

    My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .

    Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
    If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Alerts sounds are not working after upgrading to iOS 7.1.2

    Hi,
    I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
    I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
    Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

    I got this issue resolved.
    It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
    It has been fixed by cleaning the charger slot by toothbrush! with some
    drops of a cleaner.
    Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

  • My sound is not working after downloading windows 10

    My sound is not working after downloading windows 10 please can you help me?

    right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

  • Why is my Apple ID not working after I've reset it, Why is my Apple ID not working after I've reset it

    Why is my Apple ID not working after I've reset it? After I change it the password icon pops up and I type the new password in and it says it's wrong? What's happening

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • Top Nav buttons not working after publish, but works in app. WHY?

    I have tried to find out why these buttons will not work after publishing. They work fine while in the iWeb app, but not when publishing. I do not have any objects near the top nav buttons. The first site went off without a hitch
    <www.serenitycustompools.net> the second site began the problem with the last page, the nav buttons would not work. Now this 3rd site, none of the nav buttons at top will work after publish, but will work in app. Anyone else having the same probs? None of my pages have the same names or any punctuation marks, and they are simple one word named pages.
    mini intel   Mac OS X (10.4.9)  

    They all work for me, try clearing your browser cache or using another browser.

  • TS2621 why my outgoing mail server not working after ios 6 upgraded

    why my outgoing mail server not working after ios 6 upgraded

    Ask your carrier to send you the settings over wifi and then install them that way.
    I'm on giffgaff and I used the giffgaff app from the store to sort this out.
    Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
    Very Poor indeed and I held off using Apple products for years for this very reason!!

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • The click wheel is not working

    my click wheel is not working, i cannot select my music because i cant change it..... can you guys help me !!!!!!!!!!

    hey and whops about dropping your ipod...
    heres what i think but im not an ipod know it all so what i say might not help but any way...
    And it connected and updated and everything was okay, instead of the Click wheel control!
    well this sound okay so it probly isnt anything to do with the hard drive if it is updating ect...
    I think it would have to do with the fact that the hold lock was on... have you tried jigling the hold switch back and forward a bit? that often helps...other wise i think you should take it to an apple store and see what they can do.
    Hope it fixes

  • I dropped my Ipod and now the click wheel is not working anymore

    Hey! I hope you can help me! I dropped my Ipod today, and now the Click wheel doesn't work anymore! The IPod broke open, but I put it together again! When I came home I connected it with the computer to see if "its" alive. And it connected and updated and everything was okay, instead of the Click wheel control! When it dropped there was "Hold" and now I can't deactivate "Hold". So I think, maybe the click wheel doesn't work because "Hold" was activated the moment the ipod dropped! BUt I don't know! Maybe something inside the ipod a soldering joint got torn apart, or something, I don't know! I just know the click wheel doesn't work, anything else seems to be okay! Can anyone help me???

    hey and whops about dropping your ipod...
    heres what i think but im not an ipod know it all so what i say might not help but any way...
    And it connected and updated and everything was okay, instead of the Click wheel control!
    well this sound okay so it probly isnt anything to do with the hard drive if it is updating ect...
    I think it would have to do with the fact that the hold lock was on... have you tried jigling the hold switch back and forward a bit? that often helps...other wise i think you should take it to an apple store and see what they can do.
    Hope it fixes

  • Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

    Ok, first - confess - it was stupid. I installed the Soundblaster.USB.Audio.Support.pkg package, which i downloaded from the internet, to make the harman Kardon Soundsticks (USB-Version) working, as nothing happened when plugging them in.
    First, it ruined the mouse working after reboot and also disabled the internal sound card, not even as device available anymore. I fixed the mouse problem by installing IOUSBFamily-281.4.0-log(PPC).dmg
    How can I make the sound card be available and working again ? I also updated to 10.4.11. Did not help ! Can you ? Thanks !

    Welcome to the Apple discussions.
    First, look in system preferences, accounts, and for your login account look at login items to see if there is a Soundblaster USB module that is loaded when you reboot your system. Delete it if there is one.
    If you updated to 10.4.11 by software update, download the combo update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html . The combo update is a complete update for all updates to 10.4, and installing the combo sometimes fixes odd things.

  • [SOLVED] Sound (snd_hda_intel) not working after resume from suspend

    Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
    Running the following brings back the sound, but that is obviously a hack:
    fuser -k /dev/snd/*
    rmmod snd_hda_intel
    modprobe snd_hda_intel
    /etc/rc.d/alsa start
    I have on my /etc/modprobe/50-sound.conf:
    options snd-hda-intel model=laptop
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    Here's the exact hardware specification:
    # lspci -nnv|grep Audio
    80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
    Any idea where to look for this?
    Last edited by yhager (2009-08-21 16:54:00)

    [SOLVED]
    I downgraded to kernel 2.6.29 and the problem is gone.
    Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

  • Hyperlink is not working after publishing my site!

    I can fully activate my newly added page on my iweb site with no problem. I created a button and hyperlinked it to the newly created page. After I publish my site, the new button is NOT clickable. I created a new photo gallery page. I already have 1 photo page so when I clicked on that page, at the very top I am seeing a clickable link that will lead me to my newly created page. THIS IS NOT HOW I HAVE IT SET UP THOUGH! I have a button on my home page that if clicked, it will take you right to the new page! I tested it and it works! I go and publish my site and all the sudden it does NOT work!!! Anybody have a clue why this is?

    Turn on DB logging and see what the syntax is that CR tries to send to the Server. You can also enable crlogger ( search for this and you'll find a KBA on how to enable or DB logging component )
    First guess is the Date format is wrong, typically is the cause. try removing the date from the SQL and see if that works. Then try to add the selection formula in CR Designer and look at the SQL being generated
    Can be specific because you did not mention what DB you are using.
    Don

  • Why the iPad internal speakers not working with some applications and key sound?

    My iPad1 ' internal speakers not fully functioning. It is working with music and video, YouTube , but not working with applications such as games.
    Also with key pad sound .
    Please help me in this regard.

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

Maybe you are looking for