Why the date of the EXE does'n change when I recompile the application?

I made a modification ina an application for a customer and created a new EXE, but its date always shows as July 24, 2000.
The application was originally shipped to the client in february of 2001.
If I look at the properties of the exe, I read:
Date of creation: June 4, 2002
Date of last modification: July 24, 2000
Date of last access: June 12, 2002
So seems that Explorer shows (correctly) the date of last modification, but why LV sets it (incorrectly) to 2000?
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

See this similar question from a few weeks ago that Jean-Pierre Drolet answered : http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=506500000005000000857D0000&HTHREAD=000032133&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Hope it helps!
Brian

Similar Messages

When I plug my iPhone into my computer it doesn't show up at all. Not on the computer or iTunes nor does it charge when plugged into the computer. It charges just fine when it's plugged into the wall .

When I plug my phone into the computer nothing happens. The phone doesn't respond the computer doesn't show anything and ITunes doesn't show anything!

I would not worry too much about the charging aspect of the computer connection for now. I did notice that the last time I connected my iPhone to my computer the iTunes had changed and the only way I could determine that my iPhone was connected was by noticing a box at the upper right on the computer screen vs. the older graphical interface which showed the connected iPhone in a column on the left of screen. My iPhone did not turn on and did not charge. However the iPhone was connected and I could in-fact select Sync from one of the iTunes pull-down menus. Again, for quite some time I though my iPhone was not triggering the computer at all when I connected it. I use an iMac.

Colors in parade do not change when I move the Temperature slider.

I am trying to do the speed grade tutorial, but the color does not change when I move the temperature slider.

It might be nice to know which "issue" of Sg you're using.There have been issues where the colors "lag" while using a slider/control, but typically when you let "up" on the control, the adjustment is "there". From your comment, am I correct in assuming that the controls simply don't do anything even after you've moved them? And of course ... when you "move" them, you do see the indicator on the slider-line move, right?
Neil

Why is it like if i don't sync the data in my pad to the itunes of my system ,the data in my ipad is getting cleared when i copy any thing to my ipad.This is not comfortable rite?why is this so.?or there is any other way?

Why is it like if i don't sync the data in my pad to the itunes of my system ,the data in my ipad is getting cleared when i copy any thing to my ipad.This is not comfortable rite?why is this so.?or there is any other way?

i noticed this as a bug in iTunes. make sure the correct file is selected in the preferences menus. It does not have to be the default location directiory as Vazandrew stated. your iTunes music library can be anywhere you want it. i have mine on an external cuz i'm a dj and have over 80,000 songs.
once you select/verify the location of your music library, simply drag the folder into the left panel in iTunes from a finder window. iTunes does not automatically add the items like it use to for some reason.

Webelements : does not support when i add the data sourcce& view in HTML

hi Masters,
i am using sap crystal reports 2008 and when i add the data source and add tables to the report and i use web elements functions as my selection screen then it does not show i mean the script remains as it is and when i take out my data source
then it works when i view it in HTML VIEWR.
how can i make it to work despite me using the data soruce.
thank you,
pasala

hi Pasala,
this is due to the sap integration kit which does not support pass-through html. webelements require pass-through html in order to show up as html.
here's what you can try though:
1) install the latest sap integration kit on your boe system machine(s)
2) if the above does not solve the issue follow the steps at the bottom of [this thread|WebElements: HTML not rendering when using Bex Query as Source]
3) if 2 above doesn't work then see [this thread |Re: WebElements only show HTML tags (even after following WebElement guides)]as a last resort
hopefully step 1 & step 2 will solve the issue.
jamie

Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
Thank You!
I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
Incidentally, whats up with all of the Java Console Add Ons?
I have:
Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
Also, .NET Framework 0.0.0 Should I uninstall it?

TS1559 I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem

I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?

I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet.

Hi. I have the ipad 4 and have got a Vodaphone ( India) data sim, however it does not seems to work. The CS support at the gallery and the call center is lousy as they dont seem to know what they are upto. Although the sim is active i am unable to surf.

hi. I have the ipad 4 and have got a Vodaphone ( India) data sim, however it does not seems to work. The CS support at the gallery and the call center is lousy as they dont seem to know what they are upto. Although the sim is active i am unable to surf. The vodaphone number is
9168554687. Please assist

Since this is a carrier issue, we are probably not going to be able to help you. You are paying for this service, so be assertive when you call customer service.

My daughter reset her Mac book Pro to the factory settings by her doing this did we loose all the pictures and stuff that was on the computer before

My daughter reset her Mac book Pro to the factory settings by her doing this did we loose all the pictures and stuff that was on the computer before

If by resetting to factory settings you mean she erased the drive and reinstalled the operating system, OS X, then yes all data thatwas on it is gone. That is why apple included time machine so you can make backups of your data.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

The contained field name "ADTAGR" does not exist in any of the database tab

hı all
how can l solved thıs problem
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "PUT_QMFECAT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ADTAGR" does not exist in any of the database tables from the FROM clause.
Information on where terminated
    Termination occurred in the ABAP program "SAPDBZQNQ" - in "PUT_QMFECAT".
    The main program was "ZQMR_BILDIRIM ".
    In the source code you have the termination point in line 732
    of the (Include) program "SAPDBZQNQ".
Error occurred during batch input processing
    The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
     occurred in
    procedure "PUT_QMFECAT" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPDBZQNQ "; its source code begins in line
    715 of the (Include program "SAPDBZQNQ ".
FORM put_qmfecat.
DATA: l_tab_fields TYPE rsfs_tab_fields.
DATA: l_ds_clauses TYPE rsds_where.
Dynamische Feldselektion
MOVE 'QMFECAT_C' TO l_tab_fields-tablename.
READ TABLE select_fields WITH KEY l_tab_fields-tablename
                                INTO l_tab_fields.
IF sy-subrc <> c_rc00.
    CLEAR l_tab_fields.
ENDIF.
Dynamische Selektionskriterien
MOVE 'QMFECAT' TO l_ds_clauses-tablename.
READ TABLE dyn_sel-clauses WITH KEY l_ds_clauses-tablename
                             INTO l_ds_clauses.
DB-Zugriff
>>>>> SELECT (l_tab_fields-fields) FROM qmfe
INTO CORRESPONDING FIELDS OF TABLE qmfecat_tab
   WHERE qmnum = rqmqmel-qmnum
   AND kzloesch = space
   AND (l_ds_clauses-where_tab)
   ORDER BY PRIMARY KEY.
regard sinan
Edited by: eyup_sinan on Jan 6, 2012 3:21 PM
Edited by: eyup_sinan on Jan 6, 2012 3:30 PM

You seem to have made a copy of the standard program. You'll have to make sure that you are handling this field correctly in your code.
Rob

Why do I not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task?

We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document
link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the
check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe
settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.

Hi,
According to your post, my understanding is that you could not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task.
I try to reproduce the issue, however, no matter when I click the pdf type document in the library or click on the pdf document link in the workflow task email, it download the pdf doucment and then I can open it.
It will be better if you can descript how you
get the check out option as expected when you click on the pdf document in the library.
Then I upload a
word type document to the library, no matter when I click the word type document in the library or click on the word document link in the workflow task email, I can open the word document directly and get the check out option as expected.
I recommend to use the other type docuemts to check whether the check out option works.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

When I create a PDF with Adobe Reader XI, it wont take the links behind the images. Sometimes he does, mostly not.. Whats the solution? The links in text do work!

When I create a PDF with Adobe Reader XI, it wont take the links behind the images. Sometimes he does, mostly not.. Whats the solution? The links in text do work!

Hello,
How can I give a answer back in the discussion on Adobe.com?
I don’t see any link?
1.      We have a subscription.
2.      Im converting a newsletter from the web to PDF.
3.      Sometimes I put a weblink behind the image in the newsletter. Most of the time PDF wont take the links behind the image.
Only the tekstlinks are OK.
[private data removed]

Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard fast it lag until I cannot locked or switch off the phone

Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard fast it lag until I cannot locked or switch off the phone

Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage.

HT4972 hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. tha

hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. thanks.

Apple recommends backing up the data when you're getting the battery replaced by them. So I assume that you will likely lose the data during this process.
Will the data on my iPhone be preserved?
No, during the service process all data on your iPhone will be erased. Before obtaining service, it is important to back up your data using iCloud or iTunes. Apple is not responsible for the loss of information while servicing your iPhone and does not offer any data transfer service. During service, Apple may exchange your iPhone with an iPhone that is new or equivalent to new in performance and reliability.
Following service, your iPhone may have a newer operating system (iOS) version and you will need torestore your data using the method used to back it up (iCloud or iTunes). As a result, you may also need to update your App Store applications to ensure compatibility with the newer iOS. If you experience a problem with an application purchased from the App Store, check to see if an update is available or contact the application vendor directly.
copied from Apple - Support - Service Answer Center

Why the date of the EXE does'n change when I recompile the application?

Similar Messages

Maybe you are looking for