Why the Fatal Error when trying to preview or edit audio in Cp 8?

I installed Cp 8 last week. (Been using Cp 3 for years, finally made the leap). Made a presentation on Cp 8 just fine -- everything worked wonderfully. Preview ... audio edits ... everything was fine.
This week I'm working on another presentation and suddenly the program goes into a fatal error EVERY TIME I try to preview it.
So --- I continued creating my presentation without previewing anything, and then recorded audio for the project. But when I went to edit the audio, BAM - another fatal error.
This is not good. :-)
Anyone else have this problem? Any known solutions?

Sorry -- not much geek in my blood, so I forget to provide that info. :-)
OS: Win 7
The program is installed on my desktop, and there is no network. It's only my computer.
Yes, there is PLENTY of space.
I downloaded the program last week with the help of Adobe Tech support, because the program would not install. An error kept appearing saying it was missing a file. Spent 7 hours on Christmas Eve working with tech support in New Delhi, 1.5 hours of which was on the phone with the tech support having remote control of my computer. We finally figured out that AVG was preventing the install, so we deactivated AVG and then the program installed just fine.
As I said, I've been using Cp 3 for YEARS, so I'm familiar with what Cp is capable of doing. I created a project two days after Christmas and everything worked just find. Was able to preview anytime I wanted, and had no problem editing my audio.
Then without making any other changes to my computer's configuration, two days ago I was working on another presentation and went to preview the slide. The program reached 58% and then gave a fatal error, forcing shutdown. I thought I might be a hiccup, so I closed everything down and rebooted the computer, but still the same problem every time I tried to preview. I had half a dozen attempts, and each time a fatal error, always at the place where it says 58% complete (for the preview).
So --- I went ahead and completed the slide layouts without previewing anything, and figured I would add the audio, edit it, and publish the presentation. I recorded the audio (my voice) just fine, but when I tried to edit it (audio > edit > project), the system experienced a fatal error, again at the 58% mark of preparation.
My presentations are saved and backed up ... I've been thinking that I need to uninstall / reinstall the program, but after spending 7 hours doing that on Christmas Eve, I was hoping there might be an alternative solution.

Similar Messages

Error when trying to Preview in CP7

A coworker is getting the following error when trying to preview a project in CP7. This project does not have any advanced actions but does have one system variable for slide number ($$cpinfoCurrentSlide$$) in a text box that runs for the project.
Here is the error message he is receiving.
Swf compilation failed.
Note: Please verify if any of the actionscript keywords is used as user variable name.
Thanks,
Susan
This project was built from a template but when I tested the template previewed fine.

Hi there,
Are you able to reproduce the issue consistantly with the project. Can you please ask your coworker to publish a blank project and see its working fine or not?. In case if the issue is project specific, then can you please send the .cptx file to us so that we can investigate the issue at our end. Please upload it to a shared workspace(Acrobat.com) and send me the link at [email protected]
Thanks,
Nimmy Sukumaran.

Error when trying to preview screen in screen file

A few of us are receiving an error when trying to 'preview' a screen via screen file in rulebase. A large error window pops up with about 30 lines of text in it. The window is 'Preview in Web Determinations'. It starts with:
class com.oracle.determinations.interview. engine.exceptions.CorruptSessionException: A unauthorised change to the Rule Session has been detected.
further down in error there are multiple lines starting org.apache.catalina ......
Has anyone seen this error, it's intermittent, not all screens, but once it's appeared for a particular screen, it won't stop (for that particular screen), even after re-boots etc.
Does anyone know how to fix it?
many thanks

Hi There,
I have faced this type of scenario and it will happen if we are in interview screen for long time with (inactive mode) and when we try to "Preview". You can try being at interview screen (some time inactive) and you can reproduce this type of Error.
Thanks,
Raj

Fatal error when trying to install AIR app on OSX

A user of my application is getting a fatal error when trying to install on OSX. Most installs seem to go fine so I was surprised at this one.
A portion of the OSX error report is below. Has anybody experienced anything similar? If so, were you able to identify the core problem?
Thanks in advance for any thoughts!
Daniel
Date/Time:       2013-06-13 15:50:24.666 -0700
OS Version:      Mac OS X 10.8.3 (12D78)
Report Version: 10
Interval Since Last Report:          1414734 sec
Crashes Since Last Report:           30
Per-App Crashes Since Last Report:   5
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
VM Regions Near 0x8:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Applications/SimpleDiagrams2.app/Contents/MacOS/SimpleDiagrams2
    __TEXT                 0000000000001000-0000000000007000 [   24K] r-x/rwx SM=COW /Applications/SimpleDiagrams2.app/Contents/MacOS/SimpleDiagrams2
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.adobe.AIR                      0x02b43f72 0x2800000 + 3424114
1   com.adobe.AIR                      0x02909628 0x2800000 + 1087016
2   com.adobe.AIR                      0x02909853 0x2800000 + 1087571
3   com.apple.AppKit                   0x95544970 -[NSApplication(NSAppleEventHandling) _handleAEReopen:] + 255
4   com.apple.AppKit                   0x952ec824 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 378
5   libobjc.A.dylib                    0x9a3c9628 -[NSObject performSelector:withObject:withObject:] + 77
6   com.apple.Foundation               0x94e4473a __76-[NSAppleEventManager setEventHandler:andSelector:forEventClass:andEventID:]_block_invoke_0 + 121
7   com.apple.Foundation               0x94e44291 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 430
8   com.apple.Foundation               0x94e4408e _NSAppleEventManagerGenericHandler + 173
9   com.apple.AE                       0x97aeda35 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 331
10 com.apple.AE                       0x97ac2fbe dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
11 com.apple.AE                       0x97ac2e7d aeProcessAppleEvent + 318
12 com.apple.HIToolbox                0x9222fc58 AEProcessAppleEvent + 100
13 com.apple.AppKit                   0x952e8d4d _DPSNextEvent + 1655
14 com.apple.AppKit                   0x952e81dc -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
15 com.apple.AppKit                   0x952de63c -[NSApplication run] + 855
16 com.adobe.AIR                      0x0280a772 0x2800000 + 42866
17 com.adobe.AIR                      0x0280aab8 0x2800000 + 43704
18 libobjc.A.dylib                    0x9a3c95d3 -[NSObject performSelector:withObject:] + 70
19 com.simplediagrams2                0x00002f97 start + 2567
20 com.simplediagrams2                0x000025c5 start + 53
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib             0x9263d9ae kevent + 10
1   libdispatch.dylib                  0x97b75c71 _dispatch_mgr_invoke + 993
2   libdispatch.dylib                  0x97b757a9 _dispatch_mgr_thread + 53
Thread 2:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 3:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 4:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 5:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 6:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x997810e0 pthread_cond_timedwait$UNIX2003 + 70
3   com.adobe.AIR                      0x02d1b13f 0x2800000 + 5353791
4   com.adobe.AIR                      0x02d60c0e 0x2800000 + 5639182
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 7:
0   libsystem_kernel.dylib             0x9263d0ee __workq_kernreturn + 10
1   libsystem_c.dylib                  0x996f90ac _pthread_workq_return + 45
2   libsystem_c.dylib                  0x996f8e79 _pthread_wqthread + 448
3   libsystem_c.dylib                  0x996e0d2a start_wqthread + 30
Thread 8:
0   libsystem_kernel.dylib             0x9263d0ee __workq_kernreturn + 10
1   libsystem_c.dylib                  0x996f90ac _pthread_workq_return + 45
2   libsystem_c.dylib                  0x996f8e79 _pthread_wqthread + 448
3   libsystem_c.dylib                  0x996e0d2a start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x02b43f55 ecx: 0x95b40466 edx: 0x00000000
edi: 0x00000000 esi: 0xbfffef18 ebp: 0xbfffee58 esp: 0xbfffeda0
   ss: 0x00000023 efl: 0x00210282 eip: 0x02b43f72   cs: 0x0000001b
   ds: 0x00000023   es: 0x00000023   fs: 0x00000000   gs: 0x0000000f
cr2: 0x00000008
Logical CPU: 1

Hi Daniel,
Could you post or send me ([email protected]) the entire crash log? I'll at least need the binaries section so I can properly symbolicate the log.
Thanks,
Chris

Oracle Fatal error when trying to connect through sqlplus

Hi,
I am getting the below error when trying to connect to instance through sqlplus
Database version is :10.2.0.3
Operating system= Solaris Operating System (SPARC 64-bit)
OS version=5.10
[lscbd07p2*BMC]-\ORACLE>sqlplus
SQL*Plus: Release 10.1.0.4.0 - Production on Fri Nov 9 07:48:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba
ld.so.1: oracle: fatal: relocation error: file /u01/app/oracle/product/db/10.1.0.4/lib/libjox10.so: symbol kststop_: referenced symbol not found
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
Could you all please give me suggestions in order to solve this problem.
Thanks
Mannu

Have you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel

Fatal error when trying to add derived table

Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PM

Hi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any help

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

Get the following error when trying to sync itunes to Nano itunes could not coppy " Song" to the ipod because unknown error occurred (-5000). Any ideas?

Get the following error when trying to sync itunes to Nano itunes could not coppy " Song" to the ipod because unknown error occurred (-5000). Any ideas?

Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
tt2

I got the following error when trying to strt itune "microsoft visual c runtime library"

Dear all
I got the following error when trying to start itune(latest version)
Runtime error
"microsoft visual c ++ runtime library"

I kept getting the same error message too! Thank goodness I'm not alone in this!

I get the following error when trying to open iTunes

I get the following error when trying to open iTunes:
iTunes.exe - Entry Point Not Found
The procedure entry point
AVCFAssetCreateWithByteStreamAnd Options could not be located in
the dynamic link library AVFoundationCF.dll.
Any help would be much appreciated.
Thanks,
John

I get the same error,
Have you found any solution?
Please let me know
Thanks
Premal

I get the following error when trying to use the itunes store "your apple id has been disabled"

I get the following error when trying to use the itunes store "your apple id has been disabled". My account was disabled when someone else had been using it without my knowledge. I changed my apple id password and the apple id is still fine, but itunes has it disabled. I verified that the computer is authorized for this apple id. What to do now?

Welcome to the Apple Community.
Contact Apple through iTunes Store Support

Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

"Operation is not valid due to the current state of the object" error when trying to create a link for a shared folder in OneDrive

I'm trying to share a folder in OneDrive with another user in my organization, and create a link so that people outside of the company can see the folder. Whenever I try to create a link I get an error that says: "Couldn't create the link sorry something
went wrong operation is not valid due to the current state of the object" How do I resolve this?

Hi,
Sorry for replying late and I noticed that you posted another thread in this forum:
http://social.technet.microsoft.com/Forums/en-US/2b8c6f54-9c59-4b37-b28f-1d49a1b7913b/operation-is-not-valid-due-to-the-current-state-of-the-object-error-when-trying-to-create-a-link?forum=officeitpro
I've replied and kindly refer to it to see if it is helpful.
Regards,
Melon Chen
TechNet Community Support

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Why the Fatal Error when trying to preview or edit audio in Cp 8?

Similar Messages

Maybe you are looking for