WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATa?, WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATA?
why my iphone 4s getting hot when using 3g plus with data?
then my phone left side speaker didnt work when i list songs?
It is normal for the phone to get hot when your using data such as YouTube videos, streaming music etc.. And as for the left speaker not working, the left speaker is a microphone, the right one is for sound. Don't worry, everything your iPhone is doing is normal.
Similar Messages
-
Why does the IPhone 4 get really hot, when you are making a phone call??
I can't seem to find the answer to this riddle . why does the iPhone 4 get really hot when you are making phone calls or when using face Time ??
It doesn't.
There must be an issue with your iphone.
Have you tried reset? Restore?
Have you made an appointment at the genius bar to have them look at it? -
My iPhone was getting hot when used or charging. Went to Apple in Portland, OR. I did a reset on the phone. My IPhone is now making a random sound. Why??? How do I make it stop???? I have turned off all notifications. I do not have life360 or Skype. I do have Facebook, WordsFree, ScrabbleFree, Pandora.
I did the reset. I updated the iPhone to 6.0. The alert sound stopped for a while then started again. I had to go to notifications a few times to turn off some of the alerts and now I have peace, plus I learned more about the notifications. Thanks for your help. I did not need to go to the Apple Store.
-
I get my new iphone from the apple store online, and i just get my iphone for 3 3days, and when i charge my iphone, the phone will be very hot!!!! i don't know why! and when i use my phone, it just can use for 6 hours, and you should know that is i don't do anythings in my phone! give me reasons for my iphone 4 8GB!!
The iPhone should get slightly warm when charging and if being used a lot, however "HOT" is not normal. What troubleshooting steps have you tried. Powering the phone off/on is first, then a reset, and then a restore, first from a backup and then if necessary as a new device. Try those first and if that doesn't seem to work, you may have a hardware defect. If that is so, you would need to call Apple care about possibly exchanging the phone. Since you bought it online that would have to be handled this way and the old one shipped back.
-
Why do i get a copy of an e-mail when i reply to all using the iPhone?
why do i get a copy of an e-mail when i reply to all using the iPhone? I don't want to be included on the e-mail that I am sending out.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Cheers, Tom -
Why IPhone is getting hot when downloading via wifi and how to turn off itunes 11.1 launch automatically when plugged in Iphone to the PC
My brother with the iPhone 4 suffers from that too.
My iphone 5 doesnt however.
But to Stop Launch when your apple device is connected, 1. connect your iPhoneto your computer, 2.Go to the Summary Page, 3. uncheck the box "Open iTunes when this iPhone is connected" and then your good for that device. -
Why the iPhone gets heated when someone uses the internet?
Why the iPhone gets heated when someone uses the internet?
because that's what happens when use electronic devices...they warm up.
-
Iphone 4s getting hot up when using the network. is it a sim problem
iphone 4s getting hot up when using the network. is it a sim problem or battery problem?
You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Cheers, Tom -
I am constantly getting an alert on my iPhone to enter my Apple ID password for iCloud. I have been getting this since I got my iPad Air. I enter my Apple ID password and I get an alert that the password I entered is incorrect. Why is this happening? I have used the same password since I first purchased my iPhone.
1.
How to find your Apple ID - Apple Support
2.
If you forgot your Apple ID password - Apple Support
3.
Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
1.Find your e-mail address which is your Apple ID
2.Change your password
3.Delete all e-mails not active anymore
There you go.
Charly -
i replaced my apple iphone4,Because that having some technical problems.but when i get new iphone4 that does't have the previous contents that is my contacts,purchased items etc...,but the backup cd is in my hand and also my itunes having the whole content but the device is connecting to my pc,getting this message that is THIS IPHONE CANNOT BE USED BECAUSE THE APPLE MOBILE DEVICE SERVICE NOT STARTED.
Please give me a solution
thank youTry the information in this Apple Support Document. http://support.apple.com/kb/ts1567
-
Can anyone answer my question?
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
does anyone know what is going on with my phone? I don't think I'm causing this, but you never know. my home page where the phone, camera, messages, etc...all the icons will get giant....maybe 3 will be on the screen instead of the normal 20.....I have to move the screen around to find what I need to open and then I cannot...so I turn off the phone, when the red arrow appears, and have to hold down one side of the screen to make the arrow move, If I try to slide it over with my finger..........I can't get it to the end.....eventually the phone will shut off and then I turn it on again and the icons are normal....but this happens several times a week and I would like it not to happen , what can I do?
Thank You, thank You ...so much......that feature made me crazy!
Ocean20 wrote:
This can be turned off in settings/accessibility/zoom. Then on the next screen turn off -
Why does my iPhone 5 get hot when I am using facetime?
I notice that after I have been using facetime for calls for about 5 minutes, my phone gets really hot. Anyone notice this issue? Should I replace my device?
you could set up a genius bar appointment, but this may happen, are you using wifi or 3g/lte? is it plugged in while you FaceTime?
-
can someone help me figure this out my phone wont sync cause it says -This phone cannot be used because the apple moblie device service is not started. why ? it worked fine yesterday
That is because your apple mobile device service is not started.
The apple mobile device is the thing that allows your phone to communicate with your computer. First thing to try is restarting your computer then plugging your phone in. Check with activity monitor / task manager to see if it is running. -
Help
It all depends upon your configuration.
You should first determine in a case like this if your iPhone or other device has been assigned a valid DHCP address.
If you see a value like 169.x.x.x, you have not been assigned a valid DHCP address. This may occur for many reasons, most often because the DHCP server component of your router is not issuing them, or your device is not commmunicating with it. Valid DHCP addresses are generally in the ranges of…
• class A: 10.0.0.1 through 10.255.255.255
• class B: 172.16.0.1. through 172.31.255.255 and seldom used, and
• class C: 192.168.0.1 through 192.168.255.255
If you have a valid DHCP address, then the issue is likely that your router is not properly configured, in that it does not have valid DNS server addresses stored in its configuration files.
Generally, a router or gateway requires that you configure its assigned address, a valid subnet mask, and primary and secondary DNS servers. While you can use any valid DNS address for primary, secondary, tertiary and subsequent server entries, by convention, most technicians set the pair assigned by the internet service provider for your service area. In Eugene OR, for example, Comcast DNS addresses are set to…
• primary: 68.87.69.146 and
• secondary: 68.87.85.98
Check to see that your router or gateway configuration contains such information, as the result of being issued a valid DHCP address but not being able to identify a DNS server leads to the sort of issue outlined by the original poster.
You can easily determine if this is the case by querying a known site by its numeric address, rather than by its canonical name. If one takes you to the site but the other fails to do so, then you have the DNS issue I referred to.
Maybe you are looking for
-
Hi there, I was wondering whether anybody could tell me how to create a WMI filter in order to apply to machines that have Skype already installed with deploying a newer version of Skype. Your help would be much appreciated. Many thanks, Timbuctoo
-
Batch Input : Adding component with C002
Hi all I try to add component on a production ordrer with C0O2 but i have problem with the item category 'R' (Variable-size item). In fact, SAP ask me to fill variable-size item data but i can't run this step with batch input. For example with the ba
-
Regarding the table control in bdc
Hi Abap Gurus, my requirement is how to extend the table control in bdc? i have searched in the sdn but not found the proper code. i think we have to use the =P+ code . if possible post the sample code.
-
Is there any way of getting split screen function in firefox 4
Being able to split screen was a very helpful feature in the previous version of firefox, however, it is not available in version 4. Is there any other way of getting this tool?
-
"Exception in thread "main" java.lang.NoClassDefFound: classname" error.
Here's my code: public class Hello public static void main( String[] args ) System.out.println( "Hello!" ); it compiles but it wont run. it encounters this error: " Exception in thread "main" java.lang.NoClassDefFoundError: Hello" Since I am using jd