Why the lookandfeel change color randomly?

why the lookandfeel change color randomly?
after my API moves JDK1.4 to 1.5, the problem appeared.
the Max/Min/Close button of JFrame also change to other style.

yes, I have reset the Theme of MetalLookAndFeel.setCurrentTheme() to myself, but sometime it looks useless. It will use oceanTheme or myTheme randomly.
Then I add a loop to check the current theme till it use mytheme.
The new problem the min/max/close button changed randomly, though that is much less frequent.

Similar Messages

Why litmus indicator changes color?

Problem exists, the top button is not working (power supply), took it to the service center there after a day of sight said that the phone was in the water (drowned) as an indicator in a little headphone connector pink.a indicator connector cable white tsveta.Ya not drop your phone , telephone fiction in the water I UNUSED it in the rain or near water! Why is the light changed color and I refuse warranty service?
Translated by Google translator.

I do not Apple made this decision, I am from Russia, bought the phone in the store, and a decision is rendered service shop!
To the best of my knowledge, there are two sensors in the iPhone, and each have to be triggered to constitute water damage and void your warranty???????????
Message was edited by: Foxxxs

Q10 - I tap the screen to select, the icon changes color (indicating selection) but nothing happens...

I notice an issue that predominantly happens when I use my thumbs to tap but does happen with fingers from time to time.
When I select an icon (say, for instance the lower-right corner icon to jump into camera settings), the icon changes color slightly when my thumb touches the glass, and then when I remove my thumb, nothing happens.
Sometimes this happens more than 5 times in a row. It's one thing if the screen never recognized my finger/thumb in the first place. It is a bit more madening when I KNOW that there was recognition (icon changing color) and yet nothing happens..
Anyone else having this problem? Is there some way to recalibrate the screen?
Right after I posted this message I tried that camera setting button - 7 tries before anything happened with my right thumb, one try with right index finger, then again it took 5 tries with index finger. The frustrating thing is that the icon to load the camera in the first place (lower right corner)... that one almost always works with the first tap...

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

I have update to iOS 8.1.3, and I cannot open both centers, or use and cancel apps, or the screen change color to gray, or the display do not recognise that I touch it, and more. If I restart it, I find another mistake in next five hours.Help me pls.

I have update to iOS 8.1.3, and I cannot open both centers, or use and cancel apps, or the screen change color to gray, or the display do not recognise that I touch it, and more. If I restart it, I find another mistake in next five hours. Help me please.
iOS 8.1.3
iPhone 5s 32 GB
CPU 64 bit

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

The 'selected items' color randomly changes and I can't figure out why.

Hi everybody, I recently upgraded to Firefox 13, which appears to be the most stable browser version so far and I really like it. I have loved Firefox very much, having used it since somewhere between versions 2 and 3.
After upgrading to version 13 I noticed something that annoys me quite a bit. This may have been present before but I can't remember and I did not notice until now.
On my computer (Windows 7 x64 Ultimate) I have set the color of the 'selected items' (specifically text) to be lime green text on a slightly off black background. I chose this color scheme because it blends very well with Firefox itself (I have the NASA night launch theme), Windows Explorer, and many web pages that I have changed to a dark theme (using the Stylish browser extension). This color scheme has excellent contrast in areas with black text on a light background, as well as light text on a dark background. It has served me well.
After upgrading to Firefox 13 I have noticed that if the web page is dark with light text, the 'selected items' color changes to lime green text on a light grey background. (Less frequently, it changes instead to off-black text on a lime green background). I have not been able to isolate the threshold where this change occurs (meaning how dark the website background needs to be /how light the text needs to be for this to happen) nor have I found a solution.
This problem sometimes extends even to sites that have dark text on a light background: when tabs are switched, with no input fields clicked and the address bar is not clicked. This very page (Firefox support) is apparently vulnerable as well.
This problem only happens on rendered web pages. Firefox's menus, buttons and toolbars, as well as all other programs and Windows itself, are unaffected.
I want the 'selected items' to remain as I have set it, and not deviate regardless of the apparent contrast or color scheme of the web page being displayed.
[Edit #1]: Interestingly, as I was copying the information from about:support I noticed that it is affected as well.
Any suggestions? Thanks so much, and I am sorry for the long-winded description. tl;dr look at the pictures.
[http://i.imgur.com/vmLZ6.png selected items]
[http://i.imgur.com/d8xsa.png example1]
[http://i.imgur.com/2OE9J.png example2]
[http://i.imgur.com/1lhvb.png example3]
[http://i.imgur.com/UWOOp.png example4]

It is always best to avoid making changes to the selected text colors. 
Firefox uses an algorithm to check if the contrast is sufficient and will swap text and background colors if that test fails. 
*http://mxr.mozilla.org/mozilla-central/source/layout/generic/nsTextFrameThebes.cpp#3349
*http://forums.mozillazine.org/viewtopic.php?f=38&t=1331845

Why the Colour changes in AI ???

My friend had a PDF file created in AI. She gave me the PDF file only. I open the file with AI in order to do minor editing but when I copy this file and paste into a new AI document, the colour changes (it becomes darker) even both documents are in CMYK mode. (I am using Adobe Illustrator CC)
The same file my friend gave me, I did the same with Adobe Illustrator CS5, there is no problem.
Can anyone help? Thank you so much in advance.

I understand that for an export operation, but still puzzled why the histograms are almost identical in LR for images that had been brought into PS from the same RAW file and converted to different spaces (with slight differences undoubtedly due to the different gamuts). In that case, LR must be "honoring" the different color spaces, with the same appearance and histograms... But when I soft-proof the same RAW file I get very different histograms -- the sRGB more stretched out than the ProPhoto one. Those soft-proof histograms are "the same" (realizing they are all quick calculations) as when I do the corresponding convert to profile in PS.
Maybe I'm not getting my head around "the histogram of the proof target." That would be the more "dramatic" (changed) histogram I'm seeing in LR's soft proof and PS's convert to profile. But is there a reason to show it that way? Doesn't a histogram need to be interpreted in a color space to be meaningful?
If I go ahead with something like a Save for Web or Export from LR in that target color space, I'll then see the histogram return to more or less what it was before (given that rendering intent has done its thing).
Is it that the more dramatic histogram is simply representing the image in the wrong color space?? I can see that as a pragmatic decision.

Applet to draw rectanlge changing color randomly

hello ,
i am new to java and learning applets . i want to draw a rectangle which changes its color randomly .
my issue is i dont know how to set variable in
function setColor()
please help me to implement this applet .
thanks in advance !
gagan

I've done something like so:
import java.awt.Color;
import java.awt.Dimension;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.List;
import java.util.Random;
import javax.swing.JPanel;
import javax.swing.Timer;
public class AppletPanel extends JPanel
private static final int DELAY = 160;
private static final int RANDOM_COLOR_COUNT = 100;
// use some of the standard colors in an array
private Color[] colors =
 Color.white, Color.black, Color.red, Color.orange,
 Color.green, Color.blue, Color.cyan, Color.magenta, Color.YELLOW
private Color myColor = Color.white;
List<Color> colorList = new ArrayList<Color>();
private Random random = new Random();
private int delay = DELAY;
Timer timer = new Timer(delay, new ActionListener()
 public void actionPerformed(ActionEvent e)
 myColor = colorList.get(random.nextInt(colorList.size()));
 setBackground(myColor);
public AppletPanel()
 setPreferredSize(new Dimension(250, 250));
 for (int i = 0; i < colors.length; i++)
 // here we use a Color List to hold the standard colors
 colorList.add(colors);
for (int i = 0; i < RANDOM_COLOR_COUNT; i++)
Color c = new Color(
random.nextInt(256),
random.nextInt(256),
random.nextInt(256));
// and now stuff the list with random colors too!
colorList.add(c);
timer.start();
and for the applet part:
import java.awt.Container;
import java.awt.Dimension;
import java.awt.FlowLayout;
import javax.swing.BorderFactory;
import javax.swing.JApplet;
public class AppletPanelTest extends JApplet
public void init()
 try
 javax.swing.SwingUtilities.invokeAndWait(new Runnable()
 public void run()
 createGUI();
 catch (Exception e)
 System.err.println("createGUI didn't successfully complete");
private void createGUI()
 setSize(new Dimension(400, 300));
 AppletPanel panel = new AppletPanel();
 panel.setBorder(BorderFactory.createEmptyBorder(20, 20, 20, 20));
 Container contentPane = getContentPane();
 contentPane.setLayout(new FlowLayout());
 contentPane.add(panel);

When using quicktime screen recorder, the recording changes colors

Please help me out!! So I've had my macbook air for a while now and I've used the quicktime screen recorder multipul times, but latley something changed. When I go to record my screen everything works fine, and once its finished and I've saved it it's still normal. But once I go to import it into imovie the entire recording turns red, I can still see the recording but everything is just red! Everywhere else the recording looks fine, but its only when I try to put it into imovie that it changes colors. Its never done this before and all of my past screen recordings work fine.
Does anyone know what I can do to fix it?
Any advice would be greatly appreciated!
Thank you

Hello meaganmarie,
I am assuming you have quicktime up to date (10.3)
When recording a game window,
- select quicktime
- go to file > New Movie Recording
- select your game window like a rectangular marquee selection (drag and make a rectangle filling only your game window
- stop when done and save
This way the endtire screen (including youe desktop) won't be seen, just your selected game window.
Regards,
Asevenc

Do you know why the span style="color: Transparent;" build tag is set in topics as if by magic?

Hello,
We are using Robohelp 9 - 9.0.1.232
It happens that some topics contain the build tag.
It seems that RH9 sets this tag by its own. We do not manage such tags.
We come upon this while viewing one of our compiled CHM files. There was a big empty space inside a paragraph.
We opened and found that the text was present. Using the HTML view, we discovered that the empty space in the CHM file corresponded to a paragraph included in the build tag.
For example, this morning, looking at a topic of another CHM file, we found When the tool runs,. The rest of the sentence was included in a build tag.
This is extremely annoying, as we do not know that this tag is set, until we discover it. We ar elikely to deliver doc with missing information without knowing it, until a customer complains.
Has anyone encountered this or has an idea about this? How can we prevent RH9 from setting this tag?
Thanks for your help

Hi there
First, let's get a bit clearer on our terminology, shall we?
What you are seeing is not a "Build Tag". Sure, the Span indicates a tag and it's there when you build, but a "Build Tag" is a special tag inside RoboHelp that you apply to specific content that you wish to omit from the build using a counterpart known as a "Build Expression".
A Build Tag in RoboHelp looks like this:
<?rh-cbt_start condition="InProgress" ?>New model coming<?rh-cbt_end ?>
What you are reporting is an inline styling element.
Is this a project that began life in RoboHelp 9? Or was it created in an earlier version and was upgraded along the way? Does the same thing occur with a totally new topic you create?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Why the cursor changes only after moving the mouse?

I have used the setCursor() on a JInternalFrame to change the image of the cursor. I change the cursor to Cursor.WAIT_CURSOR and back to Cursor.DEFAULT_CURSOR in a new thread. Then the only way for the cursor to change from WAIT to DEFAULT is to move the mouse, otherwise it will remain in WAIT status. What's going wrong?

I am using version 1.1.2 in JBuilder1. I have an extended Dialog as an interface to change the Oracle Password. When the OK button is selected to complete the process of accessing the DB to make the change, I change cursor to the wait cursor before the DB is accessed. I have to move the mouse to trigger the cursor change to wait. I would think there would be an efficient way to do this. I would also appreciat some help. I'm not sure if this is a problem in later versions.
Thanks,
Mike

How Do I change color randomly of a MovieClip in a Timer event?

I have created a MovieClip named "Target" and called it from actionscript. Inside this movie clip I have created an 'action' layer and written the code in it:
import fl.motion.Animator;
import fl.motion.MotionEvent;
var this_xml:XML = <Motion duration="30" xmlns="fl.motion.*" xmlns:geom="flash.geom.*" xmlns:filters="flash.filters.*">
 <source>
 <Source frameRate="12" x="202" y="169.15" scaleX="1" scaleY="1" rotation="0" elementType="movie clip" symbolName="Target">
 <dimensions>
 <geom:Rectangle left="-32.05" top="-30.85" width="64.05" height="61.7"/>
 </dimensions>
 <transformationPoint>
 <geom:Point x="0.5003903200624512" y="0.5"/>
 </transformationPoint>
 </Source>
 </source>
 <Keyframe index="0" tweenSnap="true" tweenSync="true">
 <tweens>
 <SimpleEase ease="0"/>
 </tweens>
 </Keyframe>
 <Keyframe index="29" scaleX="2.096" scaleY="2.096"/>
</Motion>;
var this_animator:Animator = new Animator(this_xml, this);
this_animator.play();
this_animator.addEventListener(MotionEvent.MOTION_END, removeTarget);
function removeTarget(event:MotionEvent):void
 this.parent.removeChild(this);
In the main timeline I also have created another 'action' layer and written the code like this:
var timer:Timer;
var targetCount:uint;
var container:MovieClip;
function initGame():void
 container = new MovieClip();
 addChild(container);
 targetCount = 10;
 timer = new Timer(1000, targetCount);
 timer.addEventListener(TimerEvent.TIMER, generateTarget);
 timer.start();
function generateTarget(event:TimerEvent):void
 var target:MovieClip = new Target();
 target.x = Math.random() * stage.stageWidth;
 target.y = Math.random() * stage.stageHeight;
 container.addChild(target);
initGame();
Now I can get 10 animating circles in different places of the stage after every second. And every circles will leave the stage after completing the animation. Though I have given 'pink' color in that circle, that's why its generating with 'pink' color always. How do I change the color of each circle while it will generate?
Regards
Dipesh Pal.

I have tried in this way......
function generateTarget(event:TimerEvent):void
 var target:MovieClip = new Target();
 var colorT:ColorTransform = new ColorTransform();
 colorT.redOffset = Math.round(Math.random() * 510) - 255;
 colorT.greenOffset = Math.round(Math.random() * 510) - 255;
 target.transform.colorTransform = colorT;
 target.x = Math.random() * stage.stageWidth;
 target.y = Math.random() * stage.stageHeight;
 container.addChild(target);
but its not working......
infact i have used function 'circleColor' which holds this random color transform.... and call that function from 'generateTarget' function also....but it doesnt work too...
then how do I change the color of every circle which is randomly generating in the stage....?

Change color randomly of object

Hi,
I wrote a small application simulating a road traffic. I am using threads to do the animation.
this is the code:
public class TestProject extends Frame implements Runnable
 public static int frame; // int variable for frame (animation)
 int delay = 100; // delay for animation
 Thread animator, light; // thread name
 * Create a thread and start it.
 public void start()
 animator = new Thread(this); // create new thread
 animator.start(); // start thread
 * This method is called by the thread that was created in
 * the start method. It does the main animation.
 public void run()
 // Remember the starting time
 long tm = System.currentTimeMillis(); // get time (ms) and store it in tm
 while (Thread.currentThread() == animator)
 // Display the next frame of animation.
 if (frame==(200*roadArrangement.size()+50)) // if object reaches "end" reset
 frame =-50; // "reset" frame
 repaint(); // repaint object
 // Delay depending on how far we are behind.
 try
 tm += delay; // delay
 Thread.sleep(Math.max(0, tm - System.currentTimeMillis()));
 catch (InterruptedException e) // catch exception for thread
 System.out.println("error in thread interrupt!");
 break;
 frame++; // Advance the frame
 } // end of run
 * Set the animator variable to null so that the
 * thread will exit before displaying the next frame.
 public void stop()
 animator = null;
 * Paint a frame of animation.
 public void paint(Graphics g)
 for(int i = 0; i < roadArrangement.size(); i++)
 String tempType = roadArrangement.elementAt(i).toString();
 char roadType = tempType.charAt(0);
 g.setColor(Color.darkGray);
 if(roadType == 'r')
 g.setColor(Color.darkGray);
 g.fill3DRect(10+(i*210),100,210,60,true);
 else if(roadType == 'j')
 g.setColor(Color.darkGray);
 g.fill3DRect(10+(i*210),100,210,60,true);
 g.fill3DRect(85+(i*210),160,60,70,true);
 g.fill3DRect(85+(i*210),30,60,70,true);
 g.setColor(Color.green); // traffic light color
 g.fillOval(10+(i*210)+50,30+100,10,10); // traffic light
 Color clr = g.getColor();
 int red = clr.getRed();
 if((frame == (10+(i*210)+50))&&(red==255))
 stop(); // stop thread to stop cars
 System.out.println("STOP");
}In the code I have "oval" traffic lights where I set the colours.
Now, what I want to do is that traffic lights change independently and randomly their colour so that cars stop and drive.
How can I do this? Will I need a second thread? If yes, how to implement that?
thanks in advance.

Use [url http://java.sun.com/j2se/1.5.0/docs/api/java/util/Random.html]Random class and call nextInt every time in paint method than match a color to the int you get back.

I tried to update my ipod to iOS 6.0.1 software but it froze of a while so i attempted to restart it, now it wont even turn on! The screen changes colors everytime. I held down the lock and the home botton to try to restart it but nothing works!

I have absolutly no acess at all and the only thing that does anything is the lock and home button if i hold them down together but it seems to repeat the process with no progress but a color change. I just want to fix this problem without ruining anything on my ipod.
!!!PLEASE HELP!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why are calendars changing colors?

I'm using Calendar 6.0 and one of my Calendars (iCloud) will not stay the color I want it to be. I change it and it keeps going back to the unwanted color. Any thoughts?

Any Barbie software?
http://www.computerworld.com/s/article/9243117/_Barbie_Dreamhouse_bug_changes_Ma c_iPhone_calendars_to_gaudy_colors?utm_campaign=Feed:%20computerworld/s/feed/top ic/123%20(Computerworld%20Mac%20OS%20News)&utm_medium=feed&utm_source=feedburner &source=rss_operatingsystems

I drooped my ipad and the screen changed color

i dropped my daughter Ipad and the color changed...what can i do?

Take it to an Apple Store or Authorized Apple Service Center for diagnosis and appraisal.

Why the lookandfeel change color randomly?

Similar Messages

Maybe you are looking for